BI: Virtual Provider for ECC Report with same selection parameters

Dear all,
I have attached screen shot of ECC report selection screen with contain Material, Plant and Dates. As report is bit complex and I need to use just ITAB (internal table) of it for further use in BEx Query and for Dashboard purposes.
Problem: I need to call this report by creating Virtual Provider in BI so that I get data from ECC at runtime as it is shares report so I can't able to save any data in transparent table as report calculated opening balances at runtime.
It is possible for me by using function module i can get itab by submit return and then create Data Source for it ?
As i make copy of FM ZZRSAX_BIW_GET_SIMPLE i cannot use submit there due to OPEN CURSOR mechanism there.
Kindly anyone suggest how it is possible to call report with same selection parameters for creation of virtual provider.
Please mention if i miss any point in explaining problem.
Feel free to ask for any query.
Many thanks.
Hoping for positive and quick responses.

please create 2 reports as given below.-
REPORT ZSZP_00007.
parameters a(5) .
parameters b(5) .
parameters c(5) .
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'A' or screen-name = 'B' .
get parameter id 'aaaaaaaaaaa' field a.
get parameter id 'bbbbbbbbbbb' field B.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
start-of-selection.
your logic
REPORT zszp_00005.
PARAMETERS a(5).
PARAMETERS b(5).
START-OF-SELECTION.
SET PARAMETER ID 'aaaaaaaaaaa' FIELD a.
SET PARAMETER ID 'bbbbbbbbbbb' FIELD b.
your logic
SUBMIT zszp_00007 VIA SELECTION-SCREEN.
i hope this approach will solve your problem.
thanks
Swanand

Similar Messages

Background processing for ABAP report with selection screen

Hi ABAP Gurus,
I m facing a strange problem in scheduling a background job for my report with a selection screen. I have a variant for the report.
I scheduled a job, but it seems to be not doing anything though all the system resources are available. The job overview shows "Acive" for the job. The job is neither stopping anything, it is just sitting there In SM50, the status shows "On Hold".
Any ideas/comments on the problem and how this can be overcome?
Qucik replies and solutions will be highly appreciated as this is a crucial part for a go-live project.
Thanks in advance.
Shivani.

Yes. My report has a selection-screen which requires user input. But I have created a variant for the report and trying to run it in background using this variant. But facing this problem.
Strange thing is, instead of the usual SM36/SM37 option where we schedule and monitor background jobs, this option does not work for my report.
But I tried through SE38, and from my selection screen I selected "Schedule background job" and "run immediately" option, and this works. Though I still use SM37 to monitor this background job.
I have never faced such a situation before.
Any hints/tips why this happens and how this can be overcome in the future?
Thanks in advance.
Shivani.

Is there any ECC report with PurchOrder and Purchase Requisition Selection

Hi there,
for one of my BI report reconciliation with ECC requirement, I would like to know how many POs are there without Purchase requisitions, same way want to know how many POs are there with Purchase requisition.
I know some tables where we can find this info, unfortunately I cannot ask my user to go and check in Tables for Acceptance testing. So I am looking for any standard ECC report with POs and PRs as Columns
Due to time constraints, I cannot go build any ABAP queries in ECC at the moment,
Any insights are greatly appreciated.
Thanks

Hi Curious ,
Check if the following link is helpful. The link is from the SDN Wiki for creating a Z Report in R/3 for Purchase Requisition.
http://wiki.sdn.sap.com/wiki/display/ABAP/PurchaseRequisitionDetail+Report
Or try the following transactions:
ME5A - Purchase Requisitions: List Display
ME53 - Display Purchase Requisition
ME53N - Display Purchase Requisition
Hope this helps your cause.
Regards,
Kush Kashyap

We get many report with same computer in the SCEP alerts.

Hi,
We get many report with same computer in the SCEP alerts.
I have an email sent to support desk for "Malware detection", but same computer ends upp severaltimes long time after it have been cleand with success. I dont have "repeated malware detection" alerts enable.
So why same alerts reported several times even if it have been removed?
/SaiTech

Hi,
Please refer to the link below:
How to Configure Alerts for Endpoint Protection in Configuration Manager
http://technet.microsoft.com/en-us/library/hh508782.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

CUOM 2.3 sends multiple notifications for Event StoppedGSUPerformancePolling with same time stamps

Hi Alll,
I have a CUOM Version 2.3 which shows mutiple notifications per Device for Event StoppedGSUPerformancePolling with same time stamps. The message below is generated from the default All_Events for all devices.
Does anyone have a solution for that.
Regards Michael
This message is generated 8 times with the same time stamp in all messages.
** This message is generated from Cisco Unified Operations Manager **
ALERT ID                = 00012OW
CREATION TIME           = Sat 30-Oct-2010 16:31:57 CEST
MODIFIED TIME           = Sat 30-Oct-2010 17:00:58 CEST
STATUS                  = Active
SEVERITY                = Critical
MANAGED OBJECT          = 183.201.141.193
MANAGED OBJECT TYPE     = VoiceGateway
ASSOCIATED EVENTS       =
    Cleared:183.201.141.193:Unresponsive
    Active:183.201.141.193:StoppedGsuPerformancePolling
CUSTOMER IDENTIFICATION = Voice Port
CUSTOMER REVISION       = Voice Port

if you get SNMP timeout on multiple devices then the fault usually lies in the path that the polling follows to get to these devices and back to the server.
The problem obviously lies in the part path they have in common.
It is not unusual to see the highest backbone loads during the night, due to backups being taken.
Make sure the most important inter-switch links have no errors.
I would rather fix this then turn off alerting.
Cheers,
Michel

Enhancing Customer Reports with Commands and Parameters

Hi All,
I am implementing the mentioned tutorial. I have succesfully deployed the AccessStatisticApplication PAR on portal. While scheduling the report from Content Management -> Reports -> Running Reports, it is giving error "Can't find bundle for base name com.sap.netweaver.km.stats.reports.DocumentAccessReport, locale en_US". Has anyone faced the problem, can anyone please help to remove this runtime error.
Related Link: <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7d28a67b-0c01-0010-8d9a-d7e6811377c0">Enhancing Customer Reports with Commands and Parameters</a>
Regards
Poonam

True, the application property service is apparently not to be used for a real-life scenario
You can definitely use the application property service in production scenarios - it's used by other components in a standard KM install, i.e. out-of-the-box.
in our case it forced the server down with deadlocks. 
This should definitely not happen! Did you get SAP support to take a look at this? Was it the most popular documents report that caused this, or some other custom code? There should be no such problem with this service, since it's been around for quite some time and in production use.

Even if the code sample is not to be used for real-life scenarios it could at least make use of something else than the application property service which isnt't optimal for this use.

The application property service is good for a lot of scenarios, so it is realistic to use in in real-life scenarios. The only time I have seen this approach (storing the number of hits on documents in the database) fail is in very high-load scenarios.
Could you provide me with a link to the documentation for the logging framework?
<a href="http://http://help.sap.com/saphelp_nw70/helpdata/en/d2/5c830ca67fd842b2e87b0c341c64cd/frameset.htm">Logging and Tracing</a> on help.sap.com and <a href="https://help.sap.com/javadocs/NW04S/current/en/index.html">Logging and Tracing API (J2EE Engine API)</a> for NW 7.0.

Submit report with dynamic selections

Hi All,
I am trying to Submit a report with dynamic selections. I am using the option SUBMIT REPORT WITH FREE SELECTIONS.
But the dynamic selections are not getting passed.
Request you to kindly provide some inputs
My code is
DATA: trange TYPE rsds_trange,
      trange_line LIKE LINE OF trange,
      trange_frange_t_line LIKE LINE OF trange_line-frange_t,
      trange_frange_t_selopt_t_line LIKE LINE OF trange_frange_t_line-selopt_t,
      texpr TYPE rsds_texpr.
trange_line-tablename = 'PA0002'.
*trange_frange_t_line-tablename = 'PA0002'.
trange_frange_t_line-fieldname = 'GBJHR'.
trange_frange_t_selopt_t_line-sign   = 'I'.
trange_frange_t_selopt_t_line-option = 'EQ'.
trange_frange_t_selopt_t_line-low    = '1987'.
trange_frange_t_selopt_t_line-high   = '1987'.
APPEND trange_frange_t_selopt_t_line TO   trange_frange_t_line-selopt_t.
APPEND trange_frange_t_line TO trange_line-frange_t.
APPEND trange_line TO trange.
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
    field_ranges = trange
IMPORTING
    expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
                WITH SELECTION-TABLE rspar_tab
                WITH FREE SELECTIONS it_texpr
                and returN.
Kindly provide your inputs
Regards
Reshma

Hi Reshma,
Use the FM - RS_REFRESH_FROM_DYNAMICAL_SEL before FREE_SELECTIONS_RANGE_2_EX.
data: trange type rsds_trange,
          g_repid type sy-repid.
g_repid = 'RPCADVQ0'.
call function 'RS_REFRESH_FROM_DYNAMICAL_SEL'
    exporting
      curr_report        = g_repid
      mode_write_or_move = 'M'
    importing
      p_trange           = trange
    exceptions
      not_found          = 1
      wrong_type         = 2
      others             = 3.
if sy-subrc eq 0.
" Do the changes to the trange
CALL FUNCTION 'FREE_SELECTIONS_RANGE_2_EX'
EXPORTING
field_ranges = trange
IMPORTING
expressions = texpr.
submit RPCADVQ0
VIA SELECTION-SCREEN
WITH SELECTION-TABLE rspar_tab
WITH FREE SELECTIONS it_texpr
and returN.
endif.
Cheers,
Kothand

Drill down to a report with a select view

I have a report with a select view on a column... In this column I have coded a navigation to another report that has some details and also has a select view on the same column.
a) The only way to make this work is in the construction, using the view edit screen, the select view, select the option, save it... and then in the criteria, code the navigation.
This had to be done to every option.
b) Since the target report has also a select, whenever you navigate from the original report, the detail report is displayed "as it were", in respect to the select column... The target report is filtered by this column (I am using "is prompted") It would be nice if besides the filtering the select could show the select that comes from the original report... It is not working like this... The user has to select again (column selector) to see it like the original one...
Sorry, it is a bit confusing...but I´d appreciate any help.
Txs.Antonio

I dont think about drill down, but try with navigation using common columns. in this way we can have both side navigations summary-> detail and detail->summary.

How to create a virtual directory for the Report Server

Hi, I am new to server admin and need help with configuration.
I would like to map a physical directory on the server so that users can use a virtual path to save report outputs in that location. For example the form will call the report with desname = 'd:\xyz\abc.pdf' and the output file will be saved in a predefined directory on the server. I know how to do it on the forms server using the orion_web.xml but not sure about the report server configuration.
We are using rwservlet to run reports on 10G release2/Windows 2000.
Thanks in advance,

Virtual directories are mapped in the httpd.conf file in the Apache directory as aliases:
Alias /xyz/ "d:\xyz\"
You can now call the report output with
http://server/xyz/abc.pdf

Submit a report program with same selection screen with some values exclude

Dear All,
I have to submit a stndard report program from a copied zprogram with same slection screen values ,
and in some slect-options some values will be excluded depending upon the zprogram.
How to make it.
I mean when i submit , same selction screen values should go along with , depending upon some condions i have to exclude some values .
for ex: selection screen from a to b
posting date should go same
but may be along with it i have to pass movem,ent type <> 202 to the submit screen ,.
how to do this?

Hi Rajendra
>What if i have to pass the movement type also 200 to 250 , with 202 and 203 exluded .
Use BT ( between ) operator for 200 to 250 :
lr_move_type-sign = 'I'.
lr_move_type-option = 'BT'.
lr_move_type-low = '200'.
lr_move_type-high = '250'.
COLLECT lr_move_type.
And use NE ( not equal ) operator to exclude 202 and 203 :
lr_move_type-sign = 'I'.
lr_move_type-option = 'NE'.
lr_move_type-low = '202'.
COLLECT lr_move_type.
lr_move_type-low = '203'.
COLLECT lr_move_type.
It works just this way.
> Secondly,
>
> If i have the selction sreen same in both the screen , is it possible to pass the same values as it is with out writing one by one selct-option and parameter?
No I don't think there is way to do it without writing one by one
but you may not specify for empty select-options.
Edited by: Bulent Balci on Aug 21, 2010 11:46 AM

Integrating ECC reports with BW reports in the Portal

Greetings experts!
How, if at all, can one integrate BW reports that are in BW Roles in the portal (i.e. an enduser runs reports using the "new analysis" button in the portal via the 0analysis_pattern template) with ECC reports in the portal?
Requirement:
End users are looking for one location to go for all their reporting needs (ECC and BW) in the portal.
BW developers wish to continue the deployment and management of reports via the BW roles that reside in BW and stay away from creating an iview for every BW report.
Is this possible? thanks in advance for all your responses.
best,
-ravi

I am not sure how your ECC reports display in the Portal however I assume they are associated with an ECC Role.
You do not need to create an iview for each BW report. Upload your roles into the Portal under System Administration > Transport > Role Upload.
Each role in your ABAP (BW) role will be created in an assoicated Portal Role.
These roles will display in the Top Level Navigation, as do all roles that have been assigned to a user. The Reports of the Roles then display in the Detailed Navigation frame in the portal, once the role has been selected in the Top Level Navigation.
In this way your users go to one place, the portal to execute reports.

Design a single template for multiple reports with different column order

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to Crystal Report 2008, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks in advance.

-As I mentioned you can find Template Field object in Insert menu of crystal report Designer 2008.
As soon as you select Template Field object you will be able to see a box beside ur mouse cursor. Drag and drop this box at required place. Now when you place this object in report you will get some thing like this "<TemplateField1>" listed under Formula Fields tree. Double click "<TemplateField1>" formula to add your conditions.
-I have not tested it for large amount of Customers. However as the number of customer increases the number of conditions will get increased.
For the customer that want the same ordering of columns you can put those customers under one condition.
 for Example...
 if(?Client in ['clientA','clientA']) then
 <TableName>.<Field>......
-What do you mean be 40 columns? Do you mean 40 fields or you want to show 40 columns in report? Please elaborate.
Regards,
Amrita
Edited by: Amrita Singh on May 21, 2009 7:54 AM

Publication for Deski report with multiple data providers

Hi,
Has anyone been able to get a publication working that uses a Deski report with multiple data providers as the source? I'm trying to get a publication working that uses dynamic recipients and personalization. When I try to schedule the publication, I get the error "Object not found".
Thanks,
Debbie

Debbie,
That's standard.
It's useful for emulating outer joins in reports.
Say you've got a sales report where you want to display all 12 months of the year in a crosstab whatever month you run in.
We're only in May at the moment though. With one data provider (SALES), you'll get a crosstab with just up to May for your months.
If you create a separate data provider called MONTHS to return the months in the current year, you will then have a merged dimension of YearMonth in both.
In your crosstab if you just use YearMonth you'll get just the five months. If you qualify it with its data provider name (in our case MONTHS), you'll see the full twelve months shown.
I hope that clears it up for your.
Regards,
Mark

Report with same measure but opened by 2 different level of emp hierarchy

Hi all, I need to have a report with columns like these:
COLS: Region -- Employee Level 3 -- Product Class -- Forecast ($) for Emp Level 2 -- Forecast ($) for Emp Level 2
SAMPLE: NAS -- Anthony Fernicola -- Apps -- 100 (forecast for Anthony) -- 500 (forecast for Anthony's manager which is Keith Block)
I mean, on the report criteria I drag those columns and and from the emp hierarchy dimension I drag that EMPLOYEE LEVEL 3 column since the report must show all those employees for that level, but as you can see on the same line of the report we should show as well the forecast for the manager, in this case the EMPLOYEE LEVEL 2..
To get that measure I tried:
1) on the formula the SUM (forecast($)) BY EMPLOYEE LEVEL2 but the data is not matching the real data..
2) I also tried to use the FILTER function on the formula but I don't know how to filter it since it requires a filter_expression that I cannot give, I just want to show on that "Forecast ($) for Emp Level 2" column the forecast measure by that level 2..
3) I also tried UNION but on the results the report is showing as well the LEVEL 2 for the employee and we do not want it since we want to show all LEVEL3 only...
do you know how to do this?
thank you!!!!

Are you sure the brackets are in the right location?
This:
SELECT
0 s_0,
"A - Sample Sales"."Sales Person"."E1 Sales Rep Name" s_1,
"A - Sample Sales"."Sales Person"."E9 Manager Name" s_2,
"A - Sample Sales"."Base Facts"."1- Revenue" s_3,
SUM("A - Sample Sales"."Base Facts"."1- Revenue" BY "A - Sample Sales"."Sales Person"."E9 Manager Name") s_4
FROM "A - Sample Sales"
ORDER BY 1, 3 ASC NULLS LAST, 2 ASC NULLS LAST
works fine for me
Regards
John
http://obiee101.blogspot.com
http://obiee11g.com

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

BI: Virtual Provider for ECC Report with same selection parameters

Similar Messages

Maybe you are looking for