Adding sounds to ipad

I see you can change sounds for things like alerts, mail sent, etc.  Is there a way to purchase additional sounds?  I really would like to add different animal sounds for the alerts, especially cat sounds.  But I can't figure out how to purchase new sounds or how to get them to appear in the sounds/ringtone list.  Is is possible to add new tones to an ipad and how do you do it?  Thanks!

Check the "Tones" section of this article:
Using the iTunes Store for iPhone, iPad, and iPod touch

Similar Messages

  • Sound on ipad and iphone

    Since updating to os7.1.1 i lost my safari sound on ipad and iphone

    Hi pr1uk,
    It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • I used to able to access and listen to my itunes library from my ipad using the remote app but this no longer works.  I am connected but sound thru ipad.  Is this because of they want us to use itunes match

    I used to able to access and listen to my itunes library on my ipad  using the remote app but this no longer works.  I am connected but sound thru ipad- just controls my library on iMac.  Is this because of they want us to use itunes match

    That has nothing to do with iTunes match. The Remote app on iPad can control the computer's iTunes but not play content from iTunes on your iPad.
    To play for example iTunes imusic on iPad
    You need to have Home Sharing On.
    Check Settings > Music > Home Sharing (key in your Apple ID & password here, must be the same on computer's iTunes)
    Start iPad's Music app, tap the ... More (bottom right), tap Shared.
    Choose your iTunes' library and have fun.

  • I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

    I have a pdf file with the added sounds, so I can not run the sound in adobe reader XI on my tablet samsung galaxi pro (android)

    Thanks for writing to us. Unfortunately, such advanced javascript support is currently not provided by Adobe Reader for Android.
    Thanks,
    Adobe Reader Team

  • Photos are being added to my iPad, without choosing any events in iPhoto or having them sync with iCloud

    Photos are being added to my iPad, without choosing any events in iPhoto or having them sync with iCloud
    I just upgraded to IOS6, and now my ipad is full of pictures I did not choose to sync.
    I cannot delete them without deleting them from all sources.
    Actually, the message is when I go to hit EDIT, select a picture, and then choose DELETE: "This photo is used in an album. Do you want to delete it everywhere? Delete Everywhere"
    Does that mean "Everywhere" on my iPad, or everywhere including whatever place on my computer it found the photos to begin with?
    PLEASE HELP
    Ps:
    I've already done this:
    To delete photos from your device
    In iTunes, select the device icon in the Devices list on the left. Click the Photos tab in the resulting window.
    Choose "Sync photos from."
    On a Mac, choose iPhoto or Aperture from the pop-up menu.
    On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
    Choose "Selected albums" and deselect the albums or collections you want to delete.
    Click Apply.

    You can still sync the photos and keep the photos that are already on the device. You have to include all of the albums or events in the pictures folder that you sync from. If you are using iPhoto, select that in the Sync Photos from drop down menu and then select all of the albums or events that you want to sync. Make sure to check Selected Albums, events, faces and automatically include (no events). Using that option will allow you to choose exactly which albums and events to sync.
    You have to remember that all photos must be included in every sync so you cannot sync photos from iPhoto today and then try to sync photos from another folder tomorrow, or you will erase all of the photos that were synced from iPhoto. You need to maintain one main Photos syncing folder for the photos that you want to transfer to the iPad. You can have subfolders within that one main folder and you can selectively sync those subfolders. You just have to place all of the photos that you want to sync into one main iPad syncing photos folder.
    There are WiFi transfer apps that allow you to transfer photos to the iPad without having to sync with iTunes. I use this one. This app (and others like it) will allow you to use multiple computers to transfer photos.
    Wireless Transfer App Easily send photos to iPhone/iPad ...

  • I connected my iPad to my iMac and in iTunes I went to Apps File Sharing and added a video on my iMac to iPhoto on the iPad.   I cannot find the video that I added to the iPad. I looked in iPhoto and the camera roll. Any ideas? (BTW, this is a video whi

    I connected my iPad to my iMac and in iTunes I went to Apps > File Sharing and added a video on my iMac to iPhoto on the iPad.
    I cannot find the video that I added to the iPad. I looked in iPhoto and the camera roll. Any ideas? (BTW, this is a video which I previously had on the iPad but deleted and now I want to add it back.)

    Thanks for your reply. I looked in the Video app but it is empty. When I connect the iPad to iTunes on the iMac and look in  Apps > File Sharing > iPhoto, the video that I added is in iPhoto on the iPad but I cannot actually find the video in iPhoto on the iPad.

  • Can I play sound through IPad but watch the video through TV ?

    I want to play sound through IPad but watch the video through TV  using Apple TV
    Is that possible ?

    On my mac through itunes, I am able to control Apple TV sound through a master and two sub master volumes.
    One being my Apple TV volume (HDTV) , and the other being my mac (internal speakers).
    That being said, it might be possible to on iPAD through itunes (music).

  • How do I get sound on Ipad without earphones?

    How do I get sound on Ipad without earphones? Or is it possible to get sound on Ipad without other software?

    The iPad includes an external speaker.

  • I have just added sound fonts in my library bank, but everytime i try to load a sound tru DLS my logic crashes... Plz help.

    I have just added sound fonts in my library bank, but everytime i try to load a sound tru DLS my logic crashes... Plz help.
    cassykeys

    Have you tried importing them into the EXS 24 ? Assuming the process is the same if you're on Logic X, its just a matter of putting the soundfont files into the ~/Library/Application Support/Logic/Sampler Instruments folder and the EXS converts them when you try to load them - its explained properly in the Software Instruments manual (EXS24 section), but its very quick and  easy. It might provide a decent alternative.

  • Sound on iPad is not working and I've tried all

    sound on iPad is not working and I've tried all.. Someone HELP me

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • How To Upload Picture And adding sound

    Hi all...
    Anyone if you know how to upload picture in java application and adding sound plz try to help me thx..
    I need the coding for this 2 for my java application urgently//!!! I am currently using JFrame as my GUI.

    Eh
    Upload a picture, to what? Your PDA, an FTP server, what?
    and adding sound to the picture? or just to the application? Do you want a simple "Beep", or more?
    I need the coding for this 2 for my java application urgently
    Thats nice, I can take it then you have read the [url http://java.sun.com/docs/books/tutorial/index.html]tutorials, search google and the forums, and then posted here? It would be much faster.
    I am currently using JFrame as my GUI
    Good for you.

  • HT1535 Unwanted "Genius" playlists added to my iPad music library.

    I'm getting multiple unwanted "Genius" playlists added to my iPad music.
    How do I get rid of these files with zero bytes of data????

    Thanks for the reply but it doesn't really work.
    Once I unselect any tracks in the "smart playlist" they also unselect in my the "main" itunes. Which means when I go to listen to these tracks on my Mac, they won't play in the "main" itunes automatically without manually clicking on each one of them (those that have been unselected) and obviously vice versa for listening to music on the "smart playlist".
    Does that make any sense?
    I feel that I don't have full control over how I'm interacting with my music. It would seem, to do this, I need a seperate player for listening to music on my Mac, and itunes for syncing music back and forth on my iphone.

  • HT201320 Added email to ipad can send email but can not get email message wrong password. Can some one help

    Added email to ipad can send email but can not receive.Message wrong password .Can some one help.Thanks

    No one here will know your password

  • Lost sound on ipad, re-booted, checked settings, not working

    I suddenly lost my sound on my ipad after refreshing a live feed. I have checked all settings, re-booted, etc and still no sound.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • HT4085 No sound on IPad

    Notice no sound on IPad. All the buttons are in the correct on positions and nothing is muted . I am getting no sounds while typing or using aps.

    After reading other forum messages , I noticed all my settings were correct and still no sounds.  Powering on and off one last time helped and the sound fixed itself!

Maybe you are looking for

  • Inserting swf file into dw vs. creating full site in flash

    I'm updating a website, and am pretty familiar w/html and DreamWeaver, but would like to add some elements of Flash into the site.  I am using Flash CS4. What is the advantage and/disadvantage of inserting various swf files into my DW site versus jus

  • Password synchronization between OID and AD - 10.1.2

    Hi, I've some questions about the following issue: I've tried to setup the password synchronization between OID 10.1.2 and active directory, with the intent of exporting ldap users from OID to AD.. Well, the bootstrap gone fine, but when I tried to a

  • Something about EAX i discovered 2d

    Ok, so you have a game that uses EAX but you dont here reverb. Well I have BF2 and hear no reverb, well that is until I uped the volume a bit ( well a lot in fact ) and there it was. It was very suttle but was there. I got a slight reverb effect in a

  • URGENT! NEED TO BURN IMOVIE TO DISK ON MACBOOK AIR! URGENT!

    Hi, I have made an Imovie on my Macbook Air. I need to put it onto a disk so that I can play it in a DVD player but I am unable to do this because I do not have a disk slot in my computer! I have exported the Imovie and I put it onto a USB. I put the

  • Single Quotes Issue??

    Hi, Bit of a strange one - hopefully there is a really simple answer that I will kick myself over-.! I have a query which references a partioned table. When the following condition is added, the query references the intended partion - evident by look