Adding text to 0MOVETYPE and 0MATMREA

Hi all,
I'm working on adding text to infoobjects 0MOVETYPE and 0MATMREA, and have localized the tables in source system and created extractor for both tables. Filling 0MOVETYPE works fine, but 0MATMREA is a problem. The field "reason for movement" (GRUND in MSEG table) is directly connected to the movement type.
In source table for reason for movement (T157E) the field Movemen type is also a key, and the text table for an infoobject does not contain this many keys.
Example - source table looks like this
Language - Movetype - reason - text
EN - 101 - 1 - poor quality
EN - 102 - 1 - Shrinkage
When the field Movetype is not key in infoobject I get duplicate records.
Does anyone have any ideas on how to best solve this issue?
Thanks
regards,
Øystein

Hi,
(The infoobject looks to 0MOVETYPE to determine which text to use)
i did not get this part...
But yes if u have corresponding value of 0MOVETYPE coming form the source u can map it in transformation.It should work fine.
Regards,
Rathy

Similar Messages

PDF Maker adding text in header and footer

As I convert documents from MS Word to .pdf, I am experiencing a problem with what looks like additional text being placed in front of a field, which references a bookmark in my Word document.
The additional code is showing up in header and footers only.
When I place a reference field in the body of my document it converts properly. However, when it does convert properly in the body, it creates a hyperlink back to the referenced word - which is not my intention. My intent was to create a bookmarked area in my Word document that will propagate its contents throughout the document (in the header/footer etc...).
The additional text seems to be the code Word uses to reference the Word bookmark.
I recently updated from Professional 7 to 8 and installed the 8.1.2 update. This is the first time I have had this problem!
Any advice would be greatly appreciated.
Thanks,
Bill

I had this a long time ago and one of my students pointed out a setting in WORD. Unfortunately I do not remember the item that had to be fixed, but it was definitely a WORD problem.

How can I remove the underline from added text for tracing edits

We have a lot of content that includes underscores and when we use the track text edit feature added text is green and underlined. How can I change the properties of the added text to not be underlined?

Starting with FM11, you could specify a custom colour to be used for track changes, but the styles (underline, strikethrough) are still hardwired.
Even if you try to make the changes to the rack text edit conditions in a MIF file, they will get overwritten as the MIF is interpreted when opened by FM.
Please use the new Bugs & Features form to submit an enhancement request: https://bugbase.adobe.com/index.cfm

I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only

I saved a PDF doc in adobe and then added text to the form. But every time I try an email it it only sends the original form without text. Once I've changed a doc in Adobe, how can I save it so that I'm able to use it with added text and notes? Also, I'm using a new iPad.

If you are using those apps or websites, they are likely viewing the PDF using iOS' built in PDF previewing, which will not show annotations and markup to the PDF. We have informed Apple of this issue, but do not have any insight into whether or when they will fix it.
Regarding the qustion about importing pictures, Adobe Reader does not provide any capabilities to import pictures into a PDF. To do this, you'll need to use Acrobat, available on your desktop computer.

Adding text to a button, and related button fun

Ok, I'm new to AS3 (only been doing it for a couple weeks
now, never really learned AS2), so help would be great, especially
as the deadline was more then a week ago (not all my fault there)
I put a text field inside a button and tried to put text in
that button's text field via the following:
hmm.. I'm new to the forum I guess... don't know if it added
the code, the code is: instancenameofbutton.textfieldinstance.text
= "play";
Well that seems not to work... so how do I make it obey my
auth-or-a-tah?
Am I perhaps just slash dot syntax impaired?
Trouble seem to be that putting text over the button blocks
the event.. Is there another way to skin this cat?
A related problem I haven't been able to fix is.. I have a
text field with dynamic text.. numbers, and I want it to be bold.
Where I'm at in trying to figure out the solution is that bold
dynamic text needs to be specially embedded.. Well, I follow what
the help system tells me to do.. and nothing seems to actually
work. Is there a bug here or something?
Ok, one last related thing.. I'm following the book on
"things thou shalt not do" in that I have a good amount of moving
transparent gradients... well 2 of them actually.. but then other
transparent stuff all over the place that.. could be pushing things
a little far. The frame rate's about 14 fps, screen size is only
about 600x450, I am on an 8 core mac pro with a better then
standard graphics card... seems to me that I've been able to get
away with worse on older version of Flash on a G3 power mac bad in
the day....
Well when I tried to dynamically load mp3s, that's when
things started going down hill! now buttons blink, sometimes aren't
responsive at all.. I'm thinking maybe its that I've over laded the
player and ought to think pulling back...
I have on gradient spinning shape thing that I was
controlling by actionscript using the enter frame thing.. when I
disabled the code.. well things worked fine again... accept that
one of my buttons stopped working.. which is mysterious... cause as
far as I know the code wasn't touching that at all.. so I went back
to buggy vill, cause at least then my buttons work! (most of the
time).
So the only thing I can think to try and do is to try and
optimize stuff... the projects a bit of a rush job.. so it's "a
little hack-e" ( well I confess that at my best things are probably
"a little" hack-e, so this is really bad)
So I'm thinking of just changing the code over to a timer
thing, will that make it all groovy? I mean do you think? I seem to
remember hearing something, somewhere, about the enter frame thing
as having some issues somewhere...
What's also kind of strange is that stuff gets strange when
the mp3s are loaded.. There's only 4 of them, small little
snippets.. which probably total only about 1MB or so.. so why
should that make it trouble? Admittedly there's not a lot of
compression on them, and there stereo but?
Anyway.. I guess I'm just wondering if any of this sets of
any red flags for anyone who actually knows what they are doing..
probably not describing things well enough.. but you know, any help
is appreciated :)

same questions, same answers
I'm new to AS3 too. I know the kind of frustration you face,
especially when it comes to finding out the how's. So I'm giving
answers rather than telling people where to look for them (for
now).

Adding Text and making it behave as other items?

I'm using the Center Stage theme and adding additional text on the primary menu. When I navigate to a submenu and then go back to the main title screen, the added text does not behave like text that was already included in the original design. That is to say, most of the other text "zooms in" while the added text just "appears." It's jarring and I'd like to make it "zoom in" as well.
How do I make added text behave like the rest of the entities on the theme?

Sorry, but the added text boxes are stationary and won't 'zoom' since they are not part of the theme's animation.

Documents edited with added text and sketch not shown while emailing in iPad 2.

Documents edited with added text and sketch not shown while emailing in iPad 2.

Hi Rakmana,
This is most likely an issue with Apple's iOS Mail program's.
I think you are opening your modified PDF in Apple built-in PDF Preview. Apple's code does not properly draw the comments, but if you look at the PDF in virtually any other PDF application that isn't just using Apple''s code, or on any desktop computer, you will see the comments you've added.
Thanks
-Satyadev

When adding text in XI Pro, some characters appear and some don't. A space is substituted for the characters that don't print. How do I fix this?

When using Adobe XI Pro and adding text, some numbers are not displayed. In their place, a blank appears. At first I thought it was a weak keyboard battery, but the same data appears fine in Word. I've never seen this happen before. Does anyone have any suggestions? (Windows 7 Pro)
Thank you!

I don’t know the font. (One of our other employees had experienced the problem.) We did discover that if we saved the document and then reopened it, the text was all there.
You may close this issue.
Thank you!
Joyce M Drumm
[signature removed by host]

I need help deleting and adding text

i need help deleting and adding text, can soneone help
Adobe Photoshop Elements 10

You should delete your phone number from the topic line.
Spambots search these forums for contact info.
You don't want to get even more telemarketing/scam calls than you probably already get.
It seems like the "Do Not Call" lists are ignored these days.
Message was edited by: Bo LeBeau Looks like someone already took care of this.

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm work

When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm working on these files? On top of this, my red arrows get moved around also.

Hi ,
Could you please update me with few details like what version of Acrobat are you using?
What OS do you work on ?
Do you experience this any particular PDF or happens with all of them?
Did you try the same with turning on the OCR ?Please check the same and compare the outputs .Does that help you in anyway ?
If the file is not confidential ,could you please share the file with us so that we can analyse it our end and revert you with the appropriate answer .
Please share the file on [email protected] and please cc [email protected] as well .
Regards
Sukrit Dhingra

Adding text to indesign pages with specific font ,size,and color using javascript

Hello,
Using javascript i am able to add some text to each page of an indesign file.
myNewText = "SOME TEXT"
myTextFrame = myPage.textFrames.item(0);
tempframe = myTextFrame.contents;
myTextFrame.contents = myNewText + tempframe ;
But i want to specify the font used,size and color for that text.
When i try the code mentioned in indesign javascript scripting guide
myNewText .appliedFont = app.fonts.item("Times New Roman");
myNewText .fontStyle = "Bold";
nothing gets changed and font family already used stays the same.
How can i do that only for the added text and not for the whole content?I dont want to add the text to a new text frame I want to append it to the existing text frame.
And is there a way to specify font size too?
thank you

There's a mixup going on here. Let's see if we can sort out some of it
at least.
If you just want to add new text to an already existing text frame,
that's easy:
myTextFrame.contents += "Hello";
But if you want the new text to have unique formatting, it's a little
more complicated.
There are two simple ways to do it, I think:
1. Create a temporary text frame, as you have done, and add the text,
and format everything in there. Then move() that formatted text to the
end of myTextFrame and delete the temporary frame:
tempFrame = app.activeDocument.textFrames.add();
tempFrame.contents = "New Text";
tempFrame.paragraphs[0].appliedFont = app.fonts.itemByName("Times New
Roman"); // etc...
tempFrame.paragraphs[0].move(myTextFrame.insertionPoints[-1],
LocationOptions.AFTER);
tempFrame.remove();
2. The other option, is to add the text directly to your textFrame. But
if you want to format only that text, you have to store where the text
started:
myTextFrame = app.selection[0];
firstInsertionPoint = myTextFrame.insertionPoints[-1].index;
myTextFrame.contents += "New Text";
myAddedText =
myTextFrame.characters.itemByRange(myTextFrame.insertionPoints[firstInsertionPoint],
myTextFrame.insertionPoints[-1]);
myAddedText.appliedFont = app.fonts.itemByName("Trajan Pro"); // etc.
What you've done in your sample script, however, is to try to apply a
font to a simple JavaScript string. It won't work, but the way you did
it, it won't throw an error either, because in fact you've created a new
property of your string. (myString = "Hello"; myString.appliedFont =
"Times"; // myString now has a Javascript property called appliedFont --
but that's nothing to do with InDesign!)
HTH,
Ariel

Users are adding text boxes and not typing in form fields.

I have created forms for a client to use as grade school report cards. Some of the teachers are having issues because they are not clicking on the form fields to add information. They are actually creating and editing their own text boxes. The instructions to click on the form field and type do not seem to be working. Any suggestions?

You can use standard password security to allow form filling but disallow commenting, which includes adding text boxes.

Adding Cells with numbers and text

I am a real newbie at formulas - so if there is an obvious answer I am sorry.
I am looking to add week numbers for a custom calendar. So in one cell I have Week 1. I am looking to have the following week add 1 to that - but keep the text Week - so we get Week 2. How can I easily go about this? Thanks

That was interesting!
The most difficult part was getting the calendar to recognize the closing days and make the necessary adjustments. Here's the result for September calendar, with the school year starting September 1 to demonstrate the effect of a closing day inserted after the year begins. (One fitting your year is shown below.)
The small table to the right, "No School" is a one column table listing, in order, the dates (not including Sundays) on which the school will be closed. For periods where the school is closed for 2 or more consecutive days, each day must be included in the list. The table has two header rows and one footer row. As written, the formulas using this table require A1 to contain a non-date value, A2 to contain the date of the day before the first day of school—in the example, August 31, 2011; in your case, September 5, 2011, and the Footer row to contain a date after the last day of school.
The cell displaying the month name, and all cells showing a day number, contain a Date and Time value, with the display determined by two Custom formats, set using the Cell Format inspector. The contents of the cells are used in calculations, and must be Date and Time values, not numbers.
Row 1 is a header row.
The full date for the first of the month to be shown is entered into the center cell in row 1. (This is a merged cell formed from the three cells C1, D1 and E1. Formulas using the value refer to it as C1.)
G1: =EOMONTH(C1,0)
This returns the date for the last day of the month of the date in C1. The date is used in a conditional formatting rule in the last row of the calendar. It can be hidden by setting the text color of this cell to match its background fill color (white).
Row 2 is a header row, containing the names of the days of the week, using the Sunday to Saturday arrangement to match the illustration linked by the OP. A different starting day will require revisions to some formulas.
A3: =C1-WEEKDAY(C1,2)
This formula calculates the date of the last Sunday before the date in C1. If you don't like the fact that the "2" displays as "Monday is 1", the version below will produce the same result, with the second argument displaying as "Sunday is 1"
A3: =C1+1-WEEKDAY(C1,1)
B3: =A+1
Adds 1 (day) to the date in A1. Fill this formula Right to column G.
Select all cells in row 3 and format as Custom, Type: Date and Time, and including only the Day of Month element.
B4: =(IF(MATCH(B3,No school :: $A,1)=MATCH(B3,No school :: $A,-1),"closed",("Week "&QUOTIENT(DATEDIF(No school :: $A$2,B3,"D")-MATCH(B3,No school :: $A,1),7)+1)))
Fill this formula from B4 to G4. (Note that there is no entry in A4)
At its heart, this is an IF statement that returns "closed" if the date in the cell above it is on the closed list or the text "Week n" if that date is not on the list.
The first MATCH statement matches the 'largest' date less than or equal to the test date (in B3); the second matches the 'smallest' date equal to or more than the test date (in B3). If the date is on the list, both of the two MATCH statements will return the same value, and IF will return "closed".
If the date is not on the list, the two MATCH statements will return different values, and IF will pass control to the "if false" part of the formula (everything following "closed", ).
DATEDIF calculates the number of days since the first day on the No School list and subtracts the number of 'no school' dates in that time, using MATCH), then finds the Quotient when that number is divided by 7 (days in a week) and adds 1 to determine the week number. The concatenation operator ( & ) tacks that number to the end of the text string "Week " and returns the result.
As can be seen in the Monday and Tuesday cells in row 4, the formula will return an error message (MATCH was unable to find...) if the date is earlier than any on the table. To eliminate this, insert IFERROR between the = sign and the parenthesis at the beginning of the formula, and ,"" (comma-quote-quote) between the last and next to last parentheses at the end. This is necessary ONLY on the first date row of the September calendar, so the change can be delayed until you have made a duplicate of the completed calendar table.
Next, Select rows 3 and 4, then drag the Fill handle down two rows to copy all formulas into rows 5 and 6. Although the results may look correct, you should replace the formula in A5 with the one below:
A5: =A3+7
With that change made, select rows 5 and 6, then Fill down to rows 11 and 12.
Conditional format rule: A3 - F3
Set the rule: With Dates Before the Date C1
Conditional format rule: A11 - G11
Set the rule: With Dates After the Date G1
The default format for both these rules is the grey text shown for the August and October dates on the September calendar.
For months where another row of dates is needed, use the Add/Delete rows handle at the lower left of the active table to add two rows, select rows 11 and 12, and fill down. The filled cells will include the formatting set here.
To create calendars for the rest of the months, select the table icon for the one completed, press command-D to duplicate it, move it to a free location, then enter the date for the first day on the month you want into cell C1 of the new calendar. Here's the result for May, 2012:
And here's the September calendar fitted to your school year beginning on September 6, with no other closings in September (and with the error trap mentioned above applied to the first week of dates).
Regards,
Barry
PS: email me directly for a copy of the file. Address available by clicking my name.

Controlling position of + and – when adding text size controls

Dear gurus,
I am trying to sort my text size controls (+ and –) and
have managed to get them to resize but I can't get them to sit
together. At the moment, visually it says
Resize text then there is a big gap and there's the minus
(–) then the plus (+) is pushed over onto the next line. I've
tried my best but I simply don't have the knowledge to fix the
problem.
I have attached the code, see below (it may be full of
mistakes so, don't laugh).
Can you help and have I given you enough info?
Thanks,
Mark

@dkg62 – to make clear what's going on, select the text frame and show us another screenshot.
There are at least four cases where you can get a text like that. All cases imply, that the font you'd like to use is missing. I simulated this by formatting text with a font weight that is not available by a character style.
1. The most likely case: There is baseline shift applied; here in my case 9pt.
All other cases are academical, because the pink highlighting is aligned with the text:
2. Text frame options, baseline set to a fixed value (zero in this case)
3. Text on path and the text frame options (baseline) is just the standard default. You can see a second #-end of story sign inside the text frame.
4. Text on path and the text frame options (baseline) is set to fixed (zero in this case). The second #-sign inside the text frame is shifted above because of the fixed value of the baseline option of the text frame options. And obscured by the pink highlighting.
Uwe

Photoshop CC : Workspace Flashing Black When Inserting Guides & Completely Black When Adding Text

I recently bought Photoshop CC (2 Days Ago) and shortly after installing I jumped onto Photoshop CC and started to set up the prefferences for my personal use and started to just do some basic stuff and see whats new in CC. when inserting Guides & adding Text the workspace started to flash/stay BLACK. I don't know whats going on but my specs are better than the minimum requirements? Any idea whats going on? Operating System : Windows 8.1

Have a look through this step by step guide.
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
It's coming up 1am here, so I am calling it a night.

Adding text to 0MOVETYPE and 0MATMREA

Similar Messages

Maybe you are looking for