Adding VSA Attributes under /Radius/Profiles

Product
Cisco Access Registrar (Standard Version)
AR-Standard 3.5
AR-CPU 3.5
How to add a VSA under
[ //localhost/Radius/Profiles/Test-Profile/Attributes ]
From User-guide
According to Table A-1 Tcl Attribute Dictionary Methods
addProfile
$dict addProfile <profile> [<mode>]
Copies all of the attributes in the profile <profile> into the dictionary. Note, <profile> must be the name of one of the profiles listed in the server configuration
Can we get more info on how to configure the Profiles.
Thanks,
Santosh

You've probably meant "how to add an attribute, for example VSA"
So under:
/localhost/Radius/Profiles/Test-Profile/Attributes
use:
set Cisco-SSG-Account-Info test
(or any other attribute, in this example Cisco VSA was used)
--> ls
[ /localhost/Radius/Profiles/Test-Profile/Attributes ]
Cisco-SSG-Account-Info = test
The excerpt from user guide you have provided is used in TCL scripts and it's not relevant to your problem.
I assume you already have your VSA defined in attribute dictionaty.

Similar Messages

Pack and unpack Radius VSA attributes

Hi
As far as I know there are some methods to pack radius VSA attributes. Here are:
As the part of Cisco-AVPair
26 - VSA
Length
9 - Vendor ID
1 - Vendor Type (Cisco-AVPair Attribute ID)
Attribute Name=Value
In the Vendor Specific attribute ("throught attribute ID")
26 - VSALength
9 - Vendor ID
2 - Vendor Type (Attribute ID)
Vendor Length
Attribute Name=Value
In the Vendor Specific attribute ("throught attribute ID")
26 - VSA
Length
9 - Vendor ID
2 - Vendor Type (Attribute ID)
Value
i.e. with attribute name and witout.
How to understand which attribute needs attribute name in value string?
For example:
26|Length|9|2|Vendor Length|1|h323-incoming-conf-id=82b5fc8cd6f411dfa3c6080027716a9a
26|Length|9|2|Vendor Length|35|h323-incoming-conf-id=82b5fc8cd6f411dfa3c6080027716a9a
26|Length|9|2|Vendor Length|35|82b5fc8cd6f411dfa3c6080027716a9a
which of the methods is right?

Hi,
For the specific VSA you used in the example (h323-incoming-conf-id), (1) is the correct encoding, since Cisco VSA vendor type 1 (also more commonly referred to as cisco AV Pair) is always encoded in strings with the format of "attribute=value". This applies to other cisco VSAs that use string encoding as well. For VSA's that don't use string encoding, eg., fax-pages (vendor type 5, encoding integer), it typically doesn't include the value. You should be able to check that against the vendor dictionary to confirm. Please also see:
http://www.cisco.com/en/US/docs/ios/voice/cdr/developer/guide/cdrdefs.html
Thanks,
Wen

Add RADIUS attributes under "Group Setup" in ACS 4.2

Hi Security Experts,
I need to add RADIUS attributes for a custom vendor under "Group Setup" page in ACS 4.2. As of now, I see Cisco Aironet RADIUS Attributes,
IETF RADIUS Attributes etc in "Group Setup" page. How can I make sure that the RADIUS attributes for a vendor also appear on that page?
PS: I rate useful posts
Thanks,
Kashish

Under "Interface" you can enable which RADIUS-Attributes you want to display. Probably there's just one checkmark missing for your vendor.
The Options for RADIUS are described here:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RADAtr.html

What is the provisioning feature in the settings under, general profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3

What is the provisioning feature in the settings under, general>profile? It says something about "provisioning". What does that mean and what does it do?? (It's on my 5th generation iPod touch, black, iOS 6.1.3

A profile is used on iOS device to add specific settings and similar things to an iOS device. Tryically, they are added when the iOS devices is controlled by a company or school.
However, some apps install a profile. If your iPod is not controlled by a company or school then it seems an app added the profile. You can good the title if the profile and see if that gives any info.

Adding an Attribute to a VO changes the custom properties of the existing

Adding an Attribute to a VO changes the custom properties of the existing attributes of the VO.
We had a requirement to add an extra column in the VO.
We modified the underlying EO to include the new column from the table, and modified the VO as well.
Jdeveloper was changing the custom properties of the existing attributes in the VO. Our fix was not working as expected.
Could anyone please inform us:
1. On what logic does Jdeveloper determine to modify the existing custom properties of other VO attributes.
2. Can this behavior of Jdeveloper be controlled through any mechanism.
Thanks in advance,
Rahul.

Hi,
which version of JDeveloper and how to reproduce ?
Frank

No description displayed for attributes under user settings

All,
We want default settigns for Requistioner under User setting. We added Plant, Ship to address and Requistioner(as GR recipient) attributes under user settings, but we are not able to see the descriptions of Ship to address and Requisitiner attribute.
Do i need to do any changes in configuration.
Thanks
Ravi

Thanks for quick reponse,
I made flag as default and saved the changes under user setitins.
now when i create SC, this default recipient is not picking up.
if all the users in the organization wants to see all the recipient, do i want to mainitain all the user ids in root org unit or there is any other way to display all recipient
one more question, i am not able to see description for Delivery address also, we can see only number. what config changes need to be done to see delivery address description
Thanks
Ravi

Adding navigational attributes to a cube

We have upgraded to BW 7.3. Previously when we added navigational attributes to a cube we need to activate the update rules from the ods but now it appears that we don't need to do that anymore. Is this the expected behavaior? We are using the 3.5 update rules.
thanks

HI,
If you are using 3.5, after selecting nav attr in the cube, the cube structure gets deactivated. The dependent update rules also gets deactivated. You will be forced to activate all again.
In BW 7.3, SAP would have given privilege to add without activation. It is good for us. So nothing to worry.
Regards,
Suman

Encounter error after adding an attribute to a new dimension in AWM.

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I would post this on the OLAP forum as they should be able to help you diagnose this problem. The OLAP forum can be found at the following link:
OLAP
There is not much detail in your log, but I suspect that your OLAP mappings are incomplete or the maintenance of your dimension to load the new attribute data somehow failed. I would check the OLAP AWM build logs for more information.
Thanks
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Error when adding an attribute to a redifined entity

Dear Gateway experts,
I have the following problem:
In the service builder I have successfully created and activated an OData Service with several entities. Now I have created a second service and have redefined one of the entities of the first service. Finally I have added one attribute to this entity in the second service. Also this service could be generated succesfully. But when calling the service I get the error message "Property [NEW ATTRIBUT] of data object [ENTITY] has no Internal type assigned."
In the MPC class of the second service I see, that the structure belonging to the entity has been updated with this new attribute.
But the exporting parameter ET_ENTITYSET of the DPC class refer to the structure definition of the MPC class of the first service (because the inherite from them) without the new attribute.
So my problem is now, hoc can I add an attribute to a redfined entity without getting this error and be able to fill the export table?
Thanks a lot in advance!
Regards,
Juergen

Hi Ron,
thanks for your quick reply!
The entity of the original service is structure based. But the new attribute in the redefined service is not part of this structure. However I have added it manually and also filled the corresponding ABAP type in the column "ABAP Field Names".
The method DEFINE_<ENTITY> is only available in the MPC class of the original service. And this method is private so I can't call it from the subclasses.
In the MPC class of the redefined service there is a private method CREATE_NEW_ARTIFACTS, which is called in the method DEFINE. In this method the new attribute is already added to the entity, in the same way the other attributes were added in the DEFINE_<ENTITY> method:
lo_entity_type = model->get_entity_type(
     iv_entity_name = '<entity>' ).
lo_property = lo_entity_type->create_property(
     iv_property_name ='<attribute>'
     iv_abap_fieldname = '<ATTRIBUTE in ABAP>' ).
lo_property->set_type_edm_string( ).
So I am not sure, what else to add in these methods.
Regards,
Juergen

Multiple logins/passwords possible for one site under one profile?

I have three user log-ins at one site (personal, work, and volunteer group). Is it possible to get FF to remember all three pairs of log-ins/passwords under one profile? When I try to set the password for the second log-in, it changes the stored password for the first. It's a real pain when I use all three on a regular basis to have only one of the three stored.
Thanks,
Dale

when the keyboard is open hold on the happy face for a second and from the menu list that pops up turn off the switch for PREDICTIVE. That did it for me. When I start typing the firts letter of the login name now it predicts in yellow and I press space and fills it in, then I have to press the delete button to remove the space before pressing enter.

"Error determining attribute" after adding navigational attribute to query

Hello all,
We are getting a "Error Error determining attribute, Abort System error in program SAPLRRK0 and form RSRDR;SRRK0f30-01-" error message when running a query after adding a navigational attribute. We tried adding the attribute of the characteristic directly in the query and this works ok. But when we try using the navigational attribute we get the error. We would like to use the navigational attribute so we can filter based on this attribute.
We've searched for notes regarding this problem and haven't found any. Any suggestions?
Thanks, Ron

hi,
Please check if number of the fields after adding the Navigationl attribute the should not cross 50.
Check the RSRV test for the master data whose navigational attribute u r trying to add.
Thanks
Mukesh

General Data iView under Employee Profile

Hi All,
I need to change the General Data file under Employee Profile in MSS.
The file name is: com.sap.pct.hcm.eeprofilegeneraldata.par
Right now the display under GEneral data in portal shows positon name but i need to show the position Number also..the concerned JSP file inside the above said PAr file uses Java class method like data.getPosition() to fetch the position name.
NOw i am not sure how and by which method i can fetch position number too and display it.
COuld anyone help/advice..
thanks

Hi Mate,
quite new to these things..but i extracted my par file via WINRAR and i have to change my JSP page..i am able to change it but thing is i don know which method i have to use to fetch the posiiton number.
The JSP code is like this -
<%@ page import="java.util.ResourceBundle"%>
<%@ taglib uri="htmlb" prefix="hbj" %>
<jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean" />
<jsp:useBean id="cKey" scope="request" class="com.sap.pct.hcm.orgmanagementeventing.CKey" />
<hbj:content id="myContext" >
<hbj:page>
    <%= cKey.getJavaScriptForURLCaller() %>
    <% ResourceBundle rb = componentRequest.getResourceBundle(); %>
    <%
        String payType;
        String payArea;
        String payGroup;
        String payLevel;
        if(data.getCompensationType()==data.TYPE_PAY_SCALE){
            payType = rb.getString("pay_type");
            payArea = rb.getString("pay_area");
            payGroup = rb.getString("pay_group");
            payLevel = rb.getString("pay_level");
        } else {
            payType = rb.getString("sal_type");
            payArea = rb.getString("sal_area");
            payGroup = rb.getString("sal_group");
            payLevel = rb.getString("sal_level");
    %>
    <hbj:form>
          <%= cKey.getHiddenFormField() %>
          <%= cKey.getJavaScriptForEventReceiver(componentRequest, myContext.getCurrentFormId()) %>
          <table border="0"><tr><td colspan="7">
              <hbj:textView text="<%=data.getName()%>" design="HEADER2"/>  <hbj:textView text="<%=\"(\" + data.getPERNR() + \")\"%>" design="HEADER3"/>
          </td></tr>
          <tr><td colspan="7" height="5px"></td>
          <tr>
            <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_contract_data\")%>" design="HEADER3"/></td>
            <td>   </td>
            <td colspan="3"><hbj:textView text="<%=rb.getString(\"group_communication\")%>" design="HEADER3"/></td>
          </tr>
          <tr>
            <td><hbj:label id="la" labelFor="a" text="<%=rb.getString(\"work_contract\")%>"/></td><td> </td><td><hbj:textView id="a" text="<%=data.getWorkContract()%>"/></td>
            <td></td>
            <td><hbj:label id="lb" labelFor="b" text="<%=rb.getString(\"email\")%>"/></td><td> </td><td><hbj:link id="b" reference="<%=\"mailto:\"+data.getEmail()%>" text="<%=data.getEmail()%>"/></a></td>
          </tr>
          <tr>
            <td><hbj:label id="lc" labelFor="c" text="<%=rb.getString(\"hire_date\")%>"/></td><td></td><td><hbj:textView id="c" text="<%=data.getEntryDate()%>"/></td>
            <td></td>
            <td><hbj:label id="ld" labelFor="d" text="<%=rb.getString(\"office\")%>"/></td><td></td><td><hbj:textView id="d" text="<%=data.getOffice()%>"/></td>
          </tr>
etc etc----
if you see here they are using method like getEmail() etc for displaying data on front end screen.
at the top of this file there is a bean file included -
<jsp:useBean id="data" scope="request" class="com.sap.pct.hcm.employeeprofile.generaldata.GeneralDataBean"
this must be having all methods..bt i don know where this bean file can be acceessed? i cant see it anywhere in my extracted PAr file.
The only requrement of mine is to display postion number next to the text(text is already getting displayed)..

Error occured whenever adding an attribute to a dimension

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I've got it resolved.
I have to add levels and hierarchies before adding any attribute.
That's strong!

Adding styleclass attribute by jQuery at jspx

Hi all;
I m trying to adding styleClass attribute to my af:form tag through jQuery but it seems something is off ;
Here is my jQuery code
$(document).ready((function(){
    $('#f1').data("styleClass","form"); //$('form').addClass('form'); didnt worked
})());Here is my css
.form{
    background-color:gray;
}And Here is my partial jspx structure
<f:view>
        <link type="text/css" rel="stylesheet" href="resources/css/Xxx.css"/>
        <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.1/jquery.min.js" type="text/javascript"></script>
        <script type="text/javascript" src="resources/js/Xxx.js"></script>
        <af:document title="Xxx.jspx" id="d1" binding="#{backingBeanScope.backing_Xxx.d1}">
            <af:form id="f1" binding="#{backingBeanScope.backing_Xxx.f1}"></af:form>
        </af:document>
    </f:view>Can you please help me on this matter
jDev 11.1.2.1.0

Hi,
FYI, I figured out the solution here my self!
You need to add the attribute as "nsRoleDN", and not "nsRole" as I had.
LDAPAttribute role = new LDAPAttribute("nsRoleDN","cn=administration,dc=ie,dc=permanenttsb");
When querying/searching the Directory you can use "nsRole" or "nsRoleDN"
Thanks!
CK

Adding custom attributes in iPlanet User resource

I have a custom attribute in LDAP called "CustomAttr1" created. I would like to add this attributes into iPlanet User RO so that I can update that attribute via OIM. What is the process of adding that attribute to the iPlanet User process and forms?

Have you checked the Connector Document and specifically the section where it says "Extending the Connector"?
This: http://docs.oracle.com/cd/E11223_01/doc.904/e10446/custom.htm#CDEGCCEB
-Bikash

Adding VSA Attributes under /Radius/Profiles

Similar Messages

Maybe you are looking for