Error occured whenever adding an attribute to a dimension

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I've got it resolved.
I have to add levels and hierarchies before adding any attribute.
That's strong!

Similar Messages

Time Machine error message while restoring..."an error occurred while adding a recovery system to the destination disk

I had to change my hard drive in my MBP 15". I use Time Machine on a Time Capsule for backup. I am booting up my laptop with a bootable USB key. I have partitioned my new hard drive (bigger than the old one) and named it Macintosh HD (same as the old one). I select the option to restore from Time Machine Backup. I select one of my latest backup....select my destination drive...the restore process starts but stop within minutes with the following message. "An error occurred while adding a recovery system to the destination disk" It then prompts me to restart....
I need your help...what can it be.
Thanks

I've encountered this issue when the Time Machine was encrypted with FileVault.
Article: HT4718
Additional Information
Please note that OS X Recovery must be present on the computer's startup volume in order to use FileVault 2. Using RAID partitions or a non-standard Boot Camp partition on the startup disk may prevent OS X from installing a local Recovery system. See "OS X: Some features of Mac OS X are not supported for the disk (volume name)" for more information.
What seems to work, is reinstalling the OSX from the internet, and then using migration assistant to pull the user from the time machine backup external when logged into a temporary administrator user to move the original user back over.
Perhaps if you're stubborn, what would work is the following from the same article:
What to do if the installer warns that no Recovery System can be created
Some disk partition configurations may result in the OS X installer reporting that it could not create a Recovery System. In these situations, even if you are permitted to continue the install, you may want to quit the installation and create an external, bootable OS X hard drive with a Recovery System, first. You can continue your OS X upgrade on your computer's startup drive after creating an external Recovery System.
Your storage device must have at least 13 GB available (after formatting) to install OS X Lion or later and a Recovery partition.
These steps erase and reformat the storage device. This article instructs you on setting up a storage device to use the GUID partition scheme and the Mac OS Extended (Journaled) format, which are required to install OS X and a Recovery partition on your external storage device. You should back up any important files that are on the device to a different drive.
This procedure installs a version of OS X that is compatible with the Mac it was created with. Using this OS X system with a different Mac model may produce unpredictable results.
Your computer's serial number is sent to Apple as part of this process to help authenticate your request to download and install OS X Lion.
All of this information was collected by browsing through the public articles on the Apple Support website.

An error occurred while adding the Cluster to the list

Hello,
I've installed the HFM 9.3.1 client on a Windows Server 2003 machine and now I'm attempting to configure it. I get all the way to the Server/Cluster Registration and when I try to add my one and only HFM application server to the list I'm present with this error.
"An error occurred while adding the Cluster to the list".
I don't see anything of use in the config tool log and as a result, I'm stuck. The odd thing is that not more than 10 minutes previously I added just finished installing the HFM client on another Windows Server 2003 machine and it installed / configured perfectly.
What am I missing?
Thanks!

You may have a DNS error of sorts. From a command line on the server which presents the error, ping the servername you are trying to reach. Do not use the cluster name, but instead use the server name or IP address. If you successfully reach it, use this in the registration utility. Once the server has been reached, it will return the cluster's name. If you cannot reach it using ping, focus on the underlying DNS problem.
--Chris

Dynamically adding more attributes to cube dimension in SSAS 2008 R2

I need to dynamically add more attributes to cube dimension in SSAS 2008 R2 because the dimension table the cube is based on is updated using dynamic pivoting and there is need to update the cube dimension attributes as more columns are added to the dimension
table without making the changes through BIDS. Is there a way to dynamically adding more attributes to cube dimension in SSAS 2008 R2?
Thanks
BI Developer

Definitely. You can use AMO to add dimension attributes on the server. I have definitely done this a few times for different clients of mine. Here is a generic AMO sample:
http://msftasprodsamples.codeplex.com/wikipage?title=SS2008%21Readme_AMOAdventureWorks&referringTitle=Home
Notice the parts which add attributes to a dimension.
http://artisconsulting.com/Blogs/GregGalloway

TS2753 Unknowned error occurred whenever an update or download is attempted

I was required to reset my password a few days ago because my apps froze up on in the process of updating. Anyhow after deleting every app that was frozen I managed to download a few new apps. Now two days later an unknown error occurred message keeps popping up whenever I attempt to update or download an app.

Disable the computer's security software during the download and update. You could have easily found this answer by searching this forum since the question gets asked maybe a dozen times a day.

Error occured while Adding a reference Web Service(BizTalkServer2009_Tutorial2)

Hi,
I was going through the Biztalk tutorials. While doing the second tutorial of web service I got stuck while adding reference to the Web Service.
Steps I did:
Add service reference(by right clicking my project) --> Advanced --> Add Web Reference --> URL : http://localhost/b2bsupplierprocesspo/process.asmx
But somehow this URL is not accesible over there. I got following error:
Please suggest/guide me on this.
Thanks, Girish R. Patil.

The error clearly states the reason for failure, being "CS0016: Could not write to output file ..... ..... - Access is denied."
The directory in question is the "C:\Windows\Microsoft.Ner\Framework\v2.0.50727\Temporary ASP.NET Files". So two things
Does the tutorial mention that the Web Service should be hosted under a .Net V2.0 Application Pool? If so then please give "Full Control" permissions to the above directory for the BizTalk Service Accounts (which also should be part of your "BizTalk Isolated
Host Users" Group.
If not then the service has to be hosted in a .Net v4.0 app pool. Change the Application Pool Settings through IIS Manager and give permissions to a similar folder (Temporary ASP.Net) but under the Framework\V4.0.... directory.
Regards.

Can't restore from Time Machine "error occurred adding a recovery system"

Here's the situation:
MacBook Pro with Snow Leopard was upgraded to Mountain Lion 10.8.2.
A Time Machine backup exists (on Time Capsule) from the day before the upgrade.
I am trying to restore the Time Machine backup to a blank hard drive connected to the MacBook via FIrewire, but after rebooting with Command-R and selecting the backup source and HD destination I keep getting this (unhelpful) messages:
"An error occured while adding a recovery system to the destination disk" and "the recovery system could not be added"
Is what I am attempting impossible, or is there something else going on? What use is Time Machine if I can't restore?

Hi FranzKafka
I know it has been a while since your question, but the issue is possibly dependent on the blank HD, h=was it changed from the GUID partitioning? If so change back and you will find the Time Machine will restore back... without having to reinstall OSX. As you say, all of the original settings are captuered within TM.

OLAP Error:The underlying connection was closed: An unexpected error occure

We have recently installed BPC 51 (SP2). This been working fine for months until yesterday. Now we are getting errors on OLAP Database. Following is the problem description. Any help would be appreciated.
Received error "The underlying connection was closed: An unexpected error occurred on a send." while processing dimension. This message appears during 'Create Dimension' sub step( step 2/5). After this BPC server crashes.
The same error appears while deleting appset during 'Delete OLAP Database' sub step (step 2/4). We are also not able to restore an appset since the process hangs during OLAP Database stage.
Software version: BPC Version 5.0.102 SP2
MS SQL Server 2005
Microsoft SQL Server Management Studio      9.00.3042.00
Microsoft Analysis Services Client Tools      2005.090.3042.00
Microsoft Data Access Components (MDAC)      2000.086.3959.00 (srv03_sp2_rtm.070216-1710)
Microsoft MSXML      2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer      6.0.3790.3959
Microsoft .NET Framework      2.0.50727.1433
Operating System      5.2.3790
Thanks

Yes we did that several time, but did not solve the problem.
Finally, we processed all the dimensions, applications, appsets within SQL server studio and the problem is resolved. I am not sure if this would surface again.
Thanks
Edited by: Sankaranarayanan Janakiraman on Jun 19, 2008 8:34 AM

Processing error when doing a drillthrough agianst a Rolap dimension, working with MOLAP

Hi,
I'm having a drillthrough dimension (fact) that i'm using for drillthrough scripts. One thing that I have come a cross is that I get processing errors when I run queries agianst a ROLAP dimension where as it works agianst the same dimension set
as MOLAP. This is kind of confusing me.
The error message i get is like this one:
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined
limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while the 'Journal NO' attribute of the 'GLFact' dimension from the 'XXX' database was being processed.
I found a article about this
http://sqlblog.com/blogs/marco_russo/archive/2009/01/17/issues-executing-a-drillthrough-with-a-rolap-dimension.aspx
But I have set KeyDuplicate, Keynotfound, Nullkeyconvertedtounknown and NullKeynotallowed to ignoreerror and still it doesn't work.
So my questions are 2:
1. Do anyone have a solution for me? Or having any thoughts about this?
2. When switching over to MOLAP the processingtime takes about 30 min. How can i decrease this to a minimum?
This is all implemented in SSAS 2005.

I'm getting the exact same error when attempting to drill down on a rolap dimension associated to the cube. the cube is molap, but the dimension is rolap to reduce processing time (processing dimension using molap spike my 4 core processing to 100%
for 4 minutes due to all the select DISTINCT on the attributes (about 10)).
I too have seen the article about KeyDuplicate but I think this is a different issue. Anyone figure out the problem?
Version: SSAS 2012 SP2
Example of error:
Server: The current operation was cancelled because another operation in the transaction failed. Errors in the OLAP storage engine: An error occurred while the 'City' attribute of the 'NameAddress'
dimension from the 'MyDatabase' database was being processed. Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.

Error occur after try to add attribute for ViewObject !!

Hi
Please someone help to suggest me !
I have added filed in database table and I want this filed show on my UIX page. So I added new attribute to EO and VO which declare for this table. After that I add this field to my page . I run program but error is occured.
Error show that
Error
1.Invalid column index
2.JBO-25046: Requested row not available in row set iterator WorkflowsAllVO1.
How should I do to correct this problem ?
Thanks

Now I can correct the problem ! In my viewobject I use expert mode for query and I forgot to add new column to query.

I get error message: "An error occurred with the publication of album...Authentication with server failed...whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. What do I need to do?

I get error message: "An error occurred with the publication of album...Authentication with server failed. Please check your login and password information" whenever I open a facebook file in my iPhoto. In each file, most of my photos have disappeared. I am hoping I can retrieve these "lost" files. What do I need to do?

Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186

Error occurred in deployment step 'Add Solution': A feature with ID '' has already been installed in this farm. Use the force attribute to explicitly re-install the feature.

Hi I am getting the error
Error occurred in deployment step 'Add Solution': A feature with ID 10495515-2482-41fd-98eb-3c87f739f54b has already been installed in this farm. Use the force attribute to explicitly re-install the feature.
when trying to deploy web parts
question 1 - how do i use the force attribute when deploying from visual studio
question 2 - am i deplying it to the right place, if i deply it to the
url:port that points to my central admin tool it deploys but i cant seem to see it in any of my webs in my site collection, if i deploy it to the
url:port that points to my site collection I get this error.
im new to all this by the way :)
thanks in advance

If you are deploying from Visual Studio then please follow this post:
http://sharepointfordeveloper.blogspot.com/2014/03/solved-visual-studio-issue-error.html
Open the visual Studio and navigate to the feature XML file and add the bellow attribute.
AlwaysForceInstall="TRUE"
The <FeatureName>.Template.Xml output would be some think link this.
<?xml
version="1.0"
encoding="utf-8"
?><Feature
xmlns="http://schemas.microsoft.com/sharepoint/"
AlwaysForceInstall="TRUE"></Feature>

Encounter error after adding an attribute to a new dimension in AWM.

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I would post this on the OLAP forum as they should be able to help you diagnose this problem. The OLAP forum can be found at the following link:
OLAP
There is not much detail in your log, but I suspect that your OLAP mappings are incomplete or the maintenance of your dimension to load the new attribute data somehow failed. I would check the OLAP AWM build logs for more information.
Thanks
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Error when adding an attribute to a redifined entity

Dear Gateway experts,
I have the following problem:
In the service builder I have successfully created and activated an OData Service with several entities. Now I have created a second service and have redefined one of the entities of the first service. Finally I have added one attribute to this entity in the second service. Also this service could be generated succesfully. But when calling the service I get the error message "Property [NEW ATTRIBUT] of data object [ENTITY] has no Internal type assigned."
In the MPC class of the second service I see, that the structure belonging to the entity has been updated with this new attribute.
But the exporting parameter ET_ENTITYSET of the DPC class refer to the structure definition of the MPC class of the first service (because the inherite from them) without the new attribute.
So my problem is now, hoc can I add an attribute to a redfined entity without getting this error and be able to fill the export table?
Thanks a lot in advance!
Regards,
Juergen

Hi Ron,
thanks for your quick reply!
The entity of the original service is structure based. But the new attribute in the redefined service is not part of this structure. However I have added it manually and also filled the corresponding ABAP type in the column "ABAP Field Names".
The method DEFINE_<ENTITY> is only available in the MPC class of the original service. And this method is private so I can't call it from the subclasses.
In the MPC class of the redefined service there is a private method CREATE_NEW_ARTIFACTS, which is called in the method DEFINE. In this method the new attribute is already added to the entity, in the same way the other attributes were added in the DEFINE_<ENTITY> method:
lo_entity_type = model->get_entity_type(
     iv_entity_name = '<entity>' ).
lo_property = lo_entity_type->create_property(
     iv_property_name ='<attribute>'
     iv_abap_fieldname = '<ATTRIBUTE in ABAP>' ).
lo_property->set_type_edm_string( ).
So I am not sure, what else to add in these methods.
Regards,
Juergen

Error occurred in deployment step 'Activate Features': Feature 'myfeature guid' is Site-scoped, and cannot be added to the Web.

Error occurred in deployment step 'Activate Features': Feature 'e3d788e6-994d-446c-afbb-25ecf9907aeb' is Site-scoped, and cannot be added to the Web.
========== Build: 1 succeeded, 0 failed, 1 up-to-date, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Hi,
I have added a new eb part in my already existing SP solution. but when I added 2 new web parts into this solution and trying to depoy the same, am getting this error.
can anybody pls help what am missing.
the below is my feature manifest:
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="BApprove_Feature" Id="e3d788e6-994d-446c-afbb-25ecf9907aeb" Scope="Site"></Feature>
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/" >
<Module Name="BApprove" List="113" Url="_catalogs/wp">
<File Path="BApprove\BApprove.webpart" Url="BApprove.webpart" Type="GhostableInLibrary" >
<Property Name="Group" Value="Custom" />
</File>
</Module>
</Elements>

Hi SamolPP,
Did you already have a look at following similar post?
https://social.technet.microsoft.com/Forums/sharepoint/en-US/a2af97c8-62db-4194-9fc5-cce6bc7e5d71/content-deployment-error-feature-is-site-scoped-and-cannot-be-added-to-the-web
Hope this helps

Error occured whenever adding an attribute to a dimension

Similar Messages

Maybe you are looking for