Additional error handling within a production application using SQLERRM

I have an application that is already in production. What I would like to do is to add additional error detail currently captured within the SQLERRM. I would like to capture detail such as: where the error occurred ie. what procedure in which package attempting to insert in which table etc. etc. Is this something that I can do easily without writing hundreds of exceptions into the existing code? Please respond if you know of a way to do this.
Thanks in advance

Probably not, unfortunately. To get that level of detail, you would need to go in to every procedure and add appropriate exception handlers, state variables (so you know what table you were inserting into). Adding error handling into any application after it is "done" is going to require some heavy lifting.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Similar Messages

Accessing Essbase cubes within a HP application using Essbase add-in

Hi All,
I've been told in the past by Oracle Support personnel that accessing the Essbase cubes within a Planning application using the MS Excel Essbase add-in is "a very bad idea" and that such an approach "is not supported\recommended by Oracle due to potential issues" (which the support person could not tell me about).
Unfortunately, I have not found any information in the Planning documentation which supports or not this recommendation.
As such:
1. Could anyone point me in the right direction in terms of finding out whether it is recommended\supported (or not) for users to access Essbase cubes within a Planning application using the Essbase add-in?
2. Has anyone ever experienced issues accessing Essbase cubes within a Planning application using the MS Excel Essbase add-in? If yes, what were these issues??
PS: We are on v9.3.1.x of Essbase\Planning and will be moving over to v11.1.2.x in the next 6-8 months.
Thanks in advance,
JBM

Hi Rob,
Thank you for your prompt & informative response.
On the topic of metadata, I am aware of what happens when changes are made directly to an Essbase outline which falls under a Planning application without going following the proper method ... and I agree that it ain't pretty! :-)
On the topic of locking\sending data to the Essbase cubes within a Planning application, I also understand that it works quite well in as much as the data is saved in the appropriate intersections within the Essbase cube, as permitted by the security assigned to the user.
I was more interested in whether such a practice of locking\sending data directly to Essbase cubes within a Planning application was actually encouraged or discouraged by Oracle.
And please correct me if I am wrong but from what you are saying, it seems to me that it is neither as:
- on one hand, the "Essbase Write" HSS feature allows administrators to create security groups and assign this type of provisioning to security groups in question;
- on the other hand, Oracle Support seems to be verbally discouraging such a practice for no real reasons related to technological limitations;
The problem that I have is that because some users at our site know that they can lock\send data to Essbase cubes within a Planning application and as a result, not only want to get us to grant similar lock\send access to other users but are now more reticent than ever to move away from the Essbase add-in as a means to load\submit data to a Planning application. And that's why I was after some formal recommendation from Oracle as to whether it is a recommended practice or not.
Anyway, any suggestions would be much appreciated.
Regards,
JBM

Handling events in BSP application using WML tag Extensions

Hello Everyone ,
We are developing a BSP applications for Mobile handheld using WML tag library. I am looking for some code samples to know how we can handle evevents inside the BSP using the WML tag library.
Can any one of you plesae help us by placing a code snippet for handling onInputprocessing() methods (BSP Using WML Tag extensions).
I mean to ask how we can handle events inside the BSP applications that uses the WML tag library.
I know about how to handle BSP events using HTMLB and XHTMLB tags frameworks.
Thanks for your help in advance.
Thanks,
Greetson

Is this WML tag library something that is supplied by SAP u2013 as a BSP Extension Element? Or are you just using WML tags directly in your layout? I can tell you in general that if you want to generate HTMLB events from regular HTML code you can generate the JavaScript calls using the htmlbEvent tag of the BSP extension library. However your tags have to be running within an HTMLB Content tag for this to work.
If you want to work totally without HTMLB then you need to use the simple HTTP Post but format the input name as OnInputProcessing(<function code>) like this:
<input type="submit" name="OnInputProcessing(ok)" value="OK">
This will cause the OnInputProcessing event handler to trigger without needing any HTMLB tags (this is how it was done in WebAS 6.10 before we BSP Extensions).

Error while running SRDemo tutorial application using Jdeveloper 10.1.3.0.4

Hi,
I have completed all the ten chapters in the SRDemo tutorial and when i run the SRList.jspx it is been running and will ask for the username and password so i am logging as username:bernst,password:welcome. When it opens in the browser it displays the following error and it displays."No Rows Yet" message will be displayed. Please help me regarding this...
Note: The same error is coming even if we run the files which are provided with tutorial.
JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002; nested exception is: Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionError Code: 17002
JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: java.lang.RuntimeException, msg=javax.servlet.jsp.el.ELException: An error occurred while getting property "userId" from an instance of class oracle.srdemo.view.UserInfo
JBO-29000: Unexpected exception caught: java.lang.RuntimeException, msg=javax.servlet.jsp.el.ELException: An error occurred while getting property "userId" from an instance of class oracle.srdemo.view.UserInfo
javax.servlet.jsp.el.ELException: An error occurred while getting property "userId" from an instance of class oracle.srdemo.view.UserInfo

Hi,
the databse is not available. Check the database connection and make sure the database listeber is up and running. If this issue persist and you run the tutorial based on TopLink, select the session.xml file and open the Structure window. Double click onto the entry shown and check the connect information.
If you are usin ADF BC make use the tester to veriffy teh DB connection
Frank

Microsoft.Project.Server.Library missing namespace name 'Office' -Error while building a PSI application using WCF sample code to read calendar exceptions.

Hi,
I have a WCF application to pull calendar exception detail from a Project Server instance 2013. As per msdn links shared below I have added two dlls Microsoft.Office.Project.Server.Library , Microsoft.Office.Project.Server.Events.Receivers as well as ProjectserverServices.dll
from the server.
On building the solution I am an error, The type or namespace name 'Office' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?).
The links referred for development are-
https://msdn.microsoft.com/en-us/library/office/gg223326(v=office.15).aspx
https://msdn.microsoft.com/en-us/library/office/ee872368(v=office.15).aspx
Thanks in advance!!
Mridhula
Mridhula.S

Hi All,
The issue is resolved!! The Target framework by default was set to .NET Framework 4 Client Profile instead of .NET Framework 4.
Regards,
Mridhula
Mridhula.S

Updates to CS5 report download error and failures for multiple applications using bridge or application itself, after earlier updateswere successful. Using Windows 7 Pro 32 Bit.

Updates include the following
Bridge CS5 4.0.5 Update
Extension Manager CS5.0 Update
Illustrator CS5 15.0.2 Update
Pixel Bender Toolklit 2.5 Update
InDesign CS5 7.0.4 Update
Dreamweaver CS5 11.0.4 Update
Fireworks CS5 11.0.2 Update
Photoshop 12.0.4 Update for Photoshop CS5
Photoshop Camera Raw 6.7 Update
Every application has teh same error associated with the update; it reads "THere was an aerror downloading this update. Please quit and try again later."

update manually, http://www.adobe.com/downloads/updates/

Error ,while trying to deploy an application using DB adapter

Hi ,
I am getting the below error while deploying the SOA application using DB adapter
[11:46:00 AM] Sending archive - sca_DataBAdapter_rev2.jar
[11:46:12 AM] Received HTTP response from the server, response code=500
[11:46:12 AM] Error deploying archive sca_DataBAdapter_rev2.jar to partition "default" on server soa_server1 [http://computer:8001]
[11:46:12 AM] HTTP error code returned [500]
[11:46:12 AM] Error message from server:
*There was an error deploying the composite on soa_server1: [JCABinding] [DataBAdapter.DBAdapter/2]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec.*
[11:46:12 AM] Check server log for more details.
[11:46:12 AM] Error deploying archive sca_DataBAdapter_rev2.jar to partition "default" on server soa_server1 [http://computer:8001]
[11:46:12 AM] #### Deployment incomplete. ####
[11:46:12 AM] Error deploying archive file:/C:/JDeveloper/mywork/DataBAdapter/DataBAdapter/deploy/sca_DataBAdapter_rev2.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
Pls let me know if anyone has already faced the same!!!!!!!
Edited by: 934914 on Jun 19, 2012 5:45 AM

Hi Vijay,
Data Base is up ,what am doing ..I have deployed the my DataBAadapter SOA app it was not working so I undeployed the DataBAadapter app ..now I am deploying it again and getting the below error.
[12:52:33 AM] Sending internal deployment descriptor
[12:52:33 AM] Sending archive - sca_DataBAdapter_rev2.jar
[12:52:34 AM] Received HTTP response from the server, response code=500
[12:52:34 AM] Error deploying archive sca_DataBAdapter_rev2.jar to partition "default" on server soa_server1 [http://192.168.0.105:8001]
*[12:52:34 AM] HTTP error code returned [500]*
*[12:52:34 AM] Error message from server:*
*There was an error deploying the composite on soa_server1: [JCABinding] [DataBAdapter.DBAdapter/2]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec: Cannot locate Java class oracle.tip.adapter.db.DBWriteInteractionSpec.*
[12:52:34 AM] Check server log for more details.
[12:52:34 AM] Error deploying archive sca_DataBAdapter_rev2.jar to partition "default" on server soa_server1 [http://192.168.0.105:8001]
[12:52:34 AM] #### Deployment incomplete. ####
[12:52:34 AM] Error deploying archive file:/C:/JDeveloper/mywork/DataBAdapter/DataBAdapter/deploy/sca_DataBAdapter_rev2.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)

Execution properties, Enable automatic error handling

Hi
I am writing real-time code for standalone execution on a cRIO-9074.
If I untick the "Enable automatic error handling" option in VI properties (Execution), what is the consequence if I have an application with no error handling case structures to detect the occurrence of errors elsewhere and within subVI's ? Does the error just go undetected and the application continue regardless? If ticked, could a standalone application hang as there is no user-interface for the error to get reported automatically to? Can I configure the LabVIEW RTE to automatically handle errors in a certain way regardless of individual VI settings of the "Enable automatic error handling" option?
I am a bit confused by the usefulness of "Enable automatic error handling" within RT/FPGA code, and where in the development process it is best enabled then disabled (if necessary).
Thanks

If I untick the "Enable automatic error handling" option in VI properties (Execution), what is the consequence if I have an application with no error handling case structures to detect the occurrence of errors elsewhere and within subVI's ? Does the error just go undetected and the application continue regardless?
That's the case: the error is lost (i.e. it's not handled), and the application goes on.
If ticked, could a standalone application hang as there is no user-interface for the error to get reported automatically to?
The property "Enable automatic error handling" is not availabe in the run-time engine, so there's no automatic error handling in a built application,
Can I configure the LabVIEW RTE to automatically handle errors in a certain way regardless of individual VI settings of the "Enable automatic error handling" option?
No, for the reason stated above.
I am a bit confused by the usefulness of "Enable automatic error handling" within RT/FPGA code, and where in the development process it is best enabled then disabled (if necessary).
There's no "Enable automatic error handling" property in Labview RT either.
Regards,
Marco

Site Wide Error Handling works for Hidden iframe?

I have implemented Site Wide Error Handling within my
application. It is working great except that if there is an error
within a hidden iframe, the Error Page is not visable to the end
user. How can I bring up the Error page to the Parent so that the
Error page can be seen by the end user?
Does anyone has a solution for this?
Thanks

How about
place this in the <head> tags on your error page
<script>
function makeParent(){
if(window.location <> parent.window.location){
window.parent.location = this.parent.location;
add this to your body tag
<body onLoad="makeParent();">
Hope this helps

IDOC to SOAP asynchronous scenario Error handling

Need an expert!!!!!!!!! advise on error handling for IDOC--PI--
SOAP scenario.This is a asynchronous scenario where PI is calling a Legacy system using SOAP adapter.My question is how i can do error handling in this scenario.If i get an alert in pi with payload variable that would be fine, do i need to use BPM and if that is tthe case what will be steps.
Appreciate your help.
Manish

Hello Manish,
My question is how i can do error handling in this scenario.
Use the standard alert framework. Search on SDN / SAP Help for details.
do i need to use BPM and if that is tthe case what will be steps.
BPM is not required to raise alerts, as this is an async call.
Regards,
Neetesh

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

Hide an error from the application using a servererror trigger?

We have an application designed for an old oracle version which issues some sql which is no more supported in todays database version.
We want to use the application unchanged with a new database server.
Old Server Version: 7.3.4 (still in production...)
New Server Version: 10.2 or 11.2
The application issues an
ALTER SESSION SET OPTIMIZER_GOAL = FIRST_ROWS ;
which results in ORA-01986 and the application dies.
We would like to hide the error 01986 from the application using a trigger:
create or replace
trigger catch01986
after servererror
on schema
begin
    if (ora_is_servererror (1986)) then
      null; -- what to do here? we want clear the ora-01986 from the error stack
    end if;
end catch01986;How to handle the error, so that the alter session set ... statement is just ignored and no error code is returned to the application?
I asked already some days ago in Database-General Forum, but triggers belong to PL/SQL, so i repost here.
Tnx for help in advance!

Hi,
hoek wrote:
A totally weird and untested (and unable to test today) thought:
http://technology.amis.nl/blog/447/how-to-drive-your-colleagues-nuts-dbms_advanced_rewrite-oracle-10g
Very interesting for real dirty solution.
Does not work for my problem, DBMS_ADVANCED_REWRITE works only for select statements.
BEGIN
   SYS.DBMS_ADVANCED_REWRITE.DECLARE_REWRITE_EQUIVALENCE (
   'alter_session_equivalence',
   'ALTER SESSION SET OPTIMIZER_GOAL = FIRST_ROWS',
   'ALTER SESSION SET OPTIMIZER_MODE = RULE',
   FALSE);
END;
ORA-30389: the source statement is not compatible with the destination statement
ORA-00903: invalid table name
ORA-06512: at "SYS.DBMS_ADVANCED_REWRITE", line 29
ORA-06512: at "SYS.DBMS_ADVANCED_REWRITE", line 185
ORA-06512: at line 2
30389. 00000 - "the source statement is not compatible with the destination statement"
*Cause:    The SELECT clause of the source statement is not compatible with
           the SELECT clause of the destination statement
*Action:   Verify both SELECT clauses are compatible with each other such as
           numbers of SELECT list items are the same and the datatype for
           each SELECT list item is compatible
hoek wrote:You already had some trigger code, catching the error and sending it to null, why didn't that work?The trigger is fired when the error occurs, but after completion of the trigger, the error code is still delivered to the client.
I dont know how to handle the error within the trigger.
Does the client read the error stack and does it die after reading an error from the stack?The client just checks the error code. On error it terminates.
With the SERVERERROR TRIGGER i did the following tests:
Test 1: trigger does nothing
CREATE OR REPLACE
TRIGGER CATCH01986
AFTER SERVERERROR
ON SCHEMA
BEGIN
    IF (ORA_IS_SERVERERROR (1986)) THEN
      NULL;
    END IF;
END CATCH01986;
ALTER SESSION SET OPTIMIZER_GOAL = FIRST_ROWS;
ORA-01986: OPTIMIZER_GOAL is obsolete
01986. 00000 - "OPTIMIZER_GOAL is obsolete"
*Cause:    An obsolete parameter, OPTIMIZER_GOAL, was referenced.
*Action:   Use the OPTIMIZER_MODE parameter.
-- Client Application reports errorcode 1986Test 2: Trigger raises NO_DATA_FOUND
CREATE OR REPLACE
TRIGGER CATCH01986
AFTER SERVERERROR
ON SCHEMA
BEGIN
    IF (ORA_IS_SERVERERROR (1986)) THEN
      RAISE NO_DATA_FOUND;
    END IF;
END CATCH01986;
ALTER SESSION SET OPTIMIZER_GOAL = FIRST_ROWS;
ORA-04088: error during execution of trigger 'AH.CATCH01986'
ORA-01403: no data found
ORA-06512: at line 9
ORA-01986: OPTIMIZER_GOAL is obsolete
04088. 00000 - "error during execution of trigger '%s.%s'"
*Cause:    A runtime error occurred during execution of a trigger.
*Action:   Check the triggers which were involved in the operation.
-- Client Application reports errorcode 4088Test 3: Trigger raising an APPLICATION ERROR
CREATE OR REPLACE
TRIGGER CATCH01986
AFTER SERVERERROR
ON SCHEMA
BEGIN
    IF (ORA_IS_SERVERERROR (1986)) THEN
        DBMS_STANDARD.RAISE_APPLICATION_ERROR(-20999, 'this makes no sense', true);
    END IF;
END CATCH01986;
ALTER SESSION SET OPTIMIZER_GOAL = FIRST_ROWS;
ORA-00604: error occurred at recursive SQL level 1
ORA-20999: this makes no sense
ORA-06512: at line 10
ORA-01986: OPTIMIZER_GOAL is obsolete
00604. 00000 - "error occurred at recursive SQL level %s"
*Cause:    An error occurred while processing a recursive SQL statement
           (a statement applying to internal dictionary tables).
*Action:   If the situation described in the next error on the stack
           can be corrected, do so; otherwise contact Oracle Support.
-- Client Application reports errorcode 604Test 4: Adding an EXCEPTION part to the trigger does not help, this will catch only exceptions raised while the trigger executes:
CREATE OR REPLACE
TRIGGER CATCH01986
AFTER SERVERERROR
ON SCHEMA
BEGIN
    IF (ORA_IS_SERVERERROR (1986)) THEN
        DBMS_STANDARD.RAISE_APPLICATION_ERROR(-20999, 'this makes no sense', true);
    END IF;
EXCEPTION
    WHEN OTHERS THEN
      NULL;
END CATCH01986;
ALTER SESSION SET OPTIMIZER_GOAL = FIRST_ROWS;
ORA-01986: OPTIMIZER_GOAL is obsolete
01986. 00000 - "OPTIMIZER_GOAL is obsolete"
*Cause:    An obsolete parameter, OPTIMIZER_GOAL, was referenced.
*Action:   Use the OPTIMIZER_MODE parameter.
-- Client Application reports errorcode 1986So i do not know what to do inside the trigger to clean the error stack so that the client will receive no errorcode.

Error while Creating a basic portal application using JDeveloper

Hi,
I am trying to build a portal application using the following tutorial on JDeveloper 11.1.1.5.0 on Windows XP.
[http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/createapp.htm#CCHEGDIC|http://download.oracle.com/docs/cd/E17904_01/webcenter.1111/e10273/createapp.htm#CCHEGDIC]
I have configured all the prereqs for this tutorial. When i run the application, following message appears on the log file.
Target Portal.jpr is not runnable, using default target index.html.
and the webpage contains following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
+10.4.5 404 Not Found+
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
Following is the WLS log for the application run.
+[12:53:24 PM] ---- Deployment started. ----+
+[12:53:24 PM] Target platform is (Weblogic 10.3).+
+[12:53:24 PM] Retrieving existing application information+
+[12:53:24 PM] Running dependency analysis...+
+[12:53:24 PM] Deploying 3 profiles...+
+[12:53:28 PM] Wrote MAR file to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\AutoGeneratedMar+
+[12:53:31 PM] Wrote Web Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\NTSL_PortalWebApp.war+
+[12:53:32 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/xliffBundles' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/search/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/framework/scope/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/page/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/pageDefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/doclib/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/portalapp' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/security/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/siteresources/shared' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Namespace '/oracle/webcenter/quicklinks/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[12:53:32 PM] Info: Any customizations created while running the application will be written to 'C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.mds.dt\adrs\NTSL_PORTAL\AutoGeneratedMar\mds_adrs_writedir'.+
+[12:53:35 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL+
+[12:53:35 PM] Deploying Application...+
+<Jul 25, 2011 12:53:44 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.apps.common.resource, referenced from: C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\oracle.webcenter.framework\owur7d]. Make sure the referenced optional package has been deployed as a library.>+
+<Jul 25, 2011 12:53:53 PM GMT+05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\jaxrs-framework-web-lib\829i9k\WEB-INF\web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<EclipseLinkLogger> <basicLog> 2011-07-25 12:54:27.409--ServerSession(28900695)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.+
+[12:54:48 PM] Application Deployed Successfully.+
+[12:54:48 PM] Elapsed time for deployment: 1 minute, 24 seconds+
+[12:54:48 PM] ---- Deployment finished. ----+
Run startup time: 84155 ms.
+[Application NTSL_PORTAL deployed to Server Instance IntegratedWebLogicServer]+
Target URL -- http://127.0.0.1:7101/mytutorial/index.html
+<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at NTSL.portal.portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.+
+<NavigationCatalogException> <<init>> oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]+
+<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.+
+<Logger> <error> ServletContainerAdapter manager not initialized correctly.+
+[Application termination requested. Undeploying application NTSL_PORTAL.]+
+[01:04:42 PM] ---- Deployment started. ----+
+[01:04:42 PM] Target platform is (Weblogic 10.3).+
+[01:04:42 PM] Undeploying Application...+
+<Jul 25, 2011 1:04:42 PM GMT+05:00> <Warning> <Deployer> <BEA-149085> <No application version was specified for application 'NTSL_PORTAL'. The undeploy operation will be performed against the currently active version 'V2.0'.>+
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
+<BPELConnectionUtil> <getWorklistConnections> The Worklist service does not have a ConnectionName configuration entry in adf-config.xml that maps to a BPELConnection in connections.xml, therefore the Worklist service was not configured for this application.+
+<NotificationSenderFactory> <getSender> Notification sender is not configured+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+[01:04:48 PM] Application Undeployed Successfully.+
+[01:04:48 PM] Elapsed time for deployment: 6 seconds+
+[01:04:48 PM] ---- Deployment finished. ----+
+[Application NTSL_PORTAL stopped and undeployed from Server Instance IntegratedWebLogicServer]+
+[Running application NTSL_PORTAL on Server Instance IntegratedWebLogicServer...]+
+[01:05:40 PM] ---- Deployment started. ----+
+[01:05:40 PM] Target platform is (Weblogic 10.3).+
+[01:05:40 PM] Retrieving existing application information+
+[01:05:40 PM] Running dependency analysis...+
+[01:05:41 PM] Deploying 3 profiles...+
+[01:05:42 PM] Wrote MAR file to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\AutoGeneratedMar+
+[01:05:44 PM] Wrote Web Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL\NTSL_PortalWebApp.war+
+[01:05:45 PM] Info: Namespace '/oracle/adf/share/prefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/lifecycle/importexport' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/lock' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/rc' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/shared/oracle/wcps' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/xliffBundles' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/search/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/framework/scope/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/page/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/pageDefs' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/adf/portlet' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/adf/portletappscope' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/doclib/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/portalapp' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/security/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/siteresources/shared' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Namespace '/oracle/webcenter/quicklinks/scopedMD' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.+
+[01:05:45 PM] Info: Any customizations created while running the application will be written to 'C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.mds.dt\adrs\NTSL_PORTAL\AutoGeneratedMar\mds_adrs_writedir'.+
+[01:05:47 PM] Wrote Enterprise Application Module to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\o.j2ee\drs\NTSL_PORTAL+
+[01:05:47 PM] Deploying Application...+
+<Jul 25, 2011 1:05:52 PM GMT+05:00> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.apps.common.resource, referenced from: C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\oracle.webcenter.framework\owur7d]. Make sure the referenced optional package has been deployed as a library.>+
+<Jul 25, 2011 1:05:54 PM GMT+05:00> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>+
+<Jul 25, 2011 1:05:54 PM GMT+05:00> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00003. Log messages will continue to be logged in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>+
+<Jul 25, 2011 1:06:01 PM GMT+05:00> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Documents and Settings\ahmedh\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\servers\DefaultServer\tmp\_WL_user\jaxrs-framework-web-lib\829i9k\WEB-INF\web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
+<EclipseLinkLogger> <basicLog> 2011-07-25 13:06:36.117--ServerSession(28713857)--PersistenceUnitInfo ServiceFrameworkPUnit has transactionType RESOURCE_LOCAL and therefore jtaDataSource will be ignored+
+<ADFContext> <getCurrent> Automatically initializing a DefaultContext for getCurrent.+
Caller should ensure that a DefaultContext is proper for this use.
Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
This message may be avoided by performing initADFContext before using getCurrent().
To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST
+<LoggerHelper> <log> Cannot map nonserializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to Open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.+
+[01:06:54 PM] Application Deployed Successfully.+
+[01:06:54 PM] Elapsed time for deployment: 1 minute, 14 seconds+
+[01:06:54 PM] ---- Deployment finished. ----+
Run startup time: 73985 ms.
+[Application NTSL_PORTAL deployed to Server Instance IntegratedWebLogicServer]+
Target URL -- http://127.0.0.1:7101/mytutorial/index.html
+<JUApplicationDefImpl> <logDefaultDynamicPageMapPattern> The definition at NTSL.portal.portal.DataBindings.cpx, uses a pagemap pattern match that hides other cpx files.+
+<NavigationCatalogException> <<init>> oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]+
+<SkinFactoryImpl> <getSkin> Cannot find a skin that matches family portal and version v1.1. We will use the skin portal.desktop.+
+<Jul 25, 2011 1:11:04 PM GMT+05:00> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=DeploymentTaskSummaryPage&DeploymentTaskSummaryPortlethandle=com.bea.console.handles.JMXHandle%28%22com.bea%3AName%3DADTR-0%2CType%3DDeploymentTaskRuntime%2CDeployerRuntime%3DDeployerRuntime%22%29.>+

The below message comes when you don't specify any default file for your webcenter portal application and this should not be any problem.
Target Portal.jpr is not runnable, using default target index.html.
Can you answer to my questions:
1. Did you just created a new wcp application in jdev and ran it with out doing any changes? If you have done what are the changes?
2. How did you ran your application? (right clicking a particular page or right clicking your portal project and selected "run" option?

Office 2013 Technet installation Error 25004. The product key you entered cannot be used on this machine. (System error: - 1073422314)

I am receiving an error when attempting to install
Microsoft Office Professional Plus 2013 which I downloaded from the TechNet site. At the end of the installation process I receive the following message:
"Error 25004. The product key you entered cannot be used on this machine. This is most likely due to previous Office 2013 trials being installed. (System error:
-1073422314)"
I have never installed a trial or Beta of any Office product on this machine.   However, I have installed Office 2007 Ultimate and Office 2010 Professional Plus. All of these are 32bit versions downloaded from TechNet site. In addition,
prior to this error I had attempted unsuccessfully to install the 64bit version of Office 2013 as well as standalone versions of Visio Professional 2013 x64 and Project professional 2013 x64.   All three of these installations failed due to previous
installation of 32bit Office software, so I have downloaded the 32 bit versions but not yet tried to install, other than Office 2013.
I used the Custom upgrade option during the attempted install of Office 2013, specifying "keep all prior versions".
Note that all the above was done on a new machine. The specific purpose was to test co-existence of multiple versions of OFFICE (2007, 2010, 2013) to facilitate user training and migration.
I have tried uninstalling via Control Panel, and performed some of the steps for manual removal, however did not do all of them since 1) They are quite lengthy and 2) Some of them seem to involve removing ALL prior versions of Office, which I do not want
to do; the earlier versions are working properly and I do not want to have to uninstall them. Just want to uninstall and reinstall Office 2013.   Also tried running O15CTRREMOVE.diagcab which indicated that it could not find a problem,
but did not seem to remove anything.
I have read about ten recommended TechNet articles, which recommend everything from running a FIXIt tool, uninstalling all OFFICE software, and reformatting the whole machine. Most of these involve System error -1073418209 rather than -1073422314 (which
is the code that I am getting).   Other than that the problem sounds the same. This seems to be a problem with key management and copy protection in these products, dating back to 2010. Dozens of IT professionals have tried the solutions
and vented their frustration since other than the full format, the other solutions work only sporadically, if at all. Some of these people had been working with trial or beta software, but many who encountered this problem had not.  As
noted above, none of my software was a trail version.   I do not want to uninstall all the OFFICE versions, particularly if it as likely as not will not resolve the issue.   (I am also getting paranoid to the extent of fearing that
after uninstalling everything I might not be able to reinstall any version). I think what we need here is a definitive fix from Microsoft, though I am not too hopeful, in view of the lack of response to all the other technicians who have been struggling
with this for at least the past three years.
If anyone is aware of a solution which works consistently, I would appreciate it. Reformatting however is not an option. Detailed instructions for completely uninstalling Office 2013 (ONLY 2013) might be helpful. I would be willing to uninstall
all versions, but only as a last resort, and only if there is some assurance that this will actual solve the problem (for many others it did not seem to do so).
Thanks
PS: Probably doesn't matter, but I am running this on Windows 7 Pro w/SP1, 64 bit edition.

Tony,
Thanks for your reply.   I do in fact have three versions of Office installed on this machine, 2007 2010 and (hopefully) 2013. I have on previous occasions installed 2007 and 2010 on a single machine, but this is my first attempt to install
2013.
According to TechNet article  office.microsoft.com/en-us/support/install-and-use-multiple-versions-of-office-on-the-same-pc-HA103981695.aspx (Install
and use multiple versions of Office on the same PC) it is possible to install
Office 2003 2007 2010 and 2013 on a single system, provided they are installed in the sequence indicated.  It is noted that some problems may occur, notably involving file associations, but there is no
mention of any activation key issues.
As stated in my original request, the software which I have installed is NOT a trail version.   I did NOT obtain it from the evalcenter, but from
https://technet.microsoft.com/en-US/subscriptions/securedownloads/hh442904.
The above is a full retail version.    The files which I downloaded are:
en_office_ultimate_2007_united_states_x86_dvd_480625.iso
en_office_professional_plus_2010_x86_515486.exe
en_office_professional_plus_2013_x86_dvd_1123673.iso
I know that the error message says that the problem is commonly caused by attempting to install trial software more than once, but that is not the case. Several other people have reported this same problem, sometimes involving trial software but not
in every case.    My own opinion is that this is a software bug involving key management and copy protection.
Many people have reported on TechNet that the problem was NOT resolved even after uninstalling all Office software. While there is a chance I might get lucky, I really would like a solution which has a better chance for success.
By any chance, does the error code 1073422314
provide any further insight into this issue?
Thanks again for your help. However, further assistance is needed to resolve this issue.
PS: Sorry the font sizes are so mixed up, I haven't quite figured out how to control the formatting when I paste

Using AIA for Error Handling. Logging and Notification Services

hi,
In our project we usie OSB and BPEL for integrating different applications.
There is a suggestion that we should use AIA to just use the Error Handling, Logging and Notification services from AIA. I am not sure about this use case, as most of these services mentioned can be replicated in BPEL. Except for the AIAAsyncExceptionHandling BPEL process, i guess all other functionalties provided by AIA can be easily developed in BPEL or OSB alone.
However, would like to hear from you guys about this particular use case. Is it advisable?

Hi,
It's an issue with 10.1.3.4 OBIEE. (whem using IBM LDAP)
References
BUG:7363517 - INTERNAL BI FAILURE ON STARTUP
They issue can be resolved by setting LD_PRELOAD=/path/libibmldap.so
Here are the steps:
. sa-init.sh
export LD_PRELOAD=/path/libibmldap.so

Additional error handling within a production application using SQLERRM

Similar Messages

Maybe you are looking for