Additional field in report layout
Dear Experts,
In t code me2j (ALV format) there comes option change layout. when we click on this, we found displayed column and hidden column. if i want add one extra column in hidden column. how can I Add this. this extra column is related to report that my client want.
please suggest me step by step...
its urgent
thanks in advance
Lallan
Hi
Following are the settings you need to do for adding the field in the report layout
1. Select Settings-> Layout -> Changes
2. you will be able to see 1. displayed Columns and 2. Column Set
3. If you want to display some column from the column set, select the field and press show selected fields arrow or viceversa
I hope this clarifies your doubt
thanks and regards
ramesh
Similar Messages
-
Additional Fields for Report FBL1
Dear All
I need to add User Name field (USNAM) and few other fields to the layout for report FBL1(Vendor open line items).
I have added the field USNAM under "Define Additional Fields for Line Item Display". But the field is still not showing up for selection in the report FBL1.
Pls advice.
Rgds
NitikaHi Nikita,
Once you have added special filed you have to run the below mentioned program to extend the new filed in FBLxN report.
Run below program from SE38:
RFPOSXEXTEND
BALVBUFDEL
The correct way to fix this is mentioned in SAP note 984305. Running report BALVBUFDEL resets the buffer.
The special field is now available in the layout selection.
Hope this helps.
Pls assign points as way to say thanks -
Additional field in report S_ALR_87011990 - Asset History Sheet
Hi
This is with reference to report S_ALR_87011990 - Asset History Sheet .
I want to add quantity, location etc in this report.
can anybody guide me how to add these additional field in this report as in configuration no such option available.
Regards
DDHi,
this is decribed explicitely and detailed in the WIKI entry Include additional fields in Standard Fixed Asset ALV reports.
That´s much faster then enhancing the report. Further more you would still operate on a standard report, not a copy based on the standard report.
Regards,
Markus -
FBL5N : Adding additional field PERNR to layout
Hi experts,
I had added additional field PERNR - personnel number in FBL5N layout for displaying in output.
I had added pernr- personnel number by following the path
SPRO -> Financial accounting ( new ) -> accounts receivable and accounts payable-> customer accounts ->line items -> display line items -> define additional fields for line item dispaly
here i added bseg - pernr
after adding , in FBL5N layout the field is appearing , but it is displaying blank in output .
Is there any thing needs to be done to display additional field in output of FBL5N.
kindly give me any suggestions.
thanks & tregards,
Raghul
Edited by: Raghul Gandhi on Mar 23, 2010 9:30 AMHi,
FBL5N: customer line item display.
BSEG-PERNR: personnel number.
Under which circumstances should BSEG-PERNR contain a value if you create customer related postings?
If there is no personnel number given during posting (why should it?) the field added to the FBL5N-layout will be empty.
Best regards, Christian -
Additional fields in report for form with report
Hello,
I got the problem, that I want to create a form with report where the form only changes the values of one table but the report is also using additional fields linked from another table. If I take a view with all fields for my form with report, the form is about all fields and not only about those from the first table. So is there a way to have another table linked to the form than to the report and get a link between them by a key?
I hope that someone has got a great idea and can help me solving this.
Thanks
JochenJochen,
you can create a form with report on the view and afterwards you change the SQL-query into a query on the view. Take care that the original column names remain the same. You get your extra columns in the report and your link to the form remains,
good luck,
DickDral -
Dear All
I want to have Material stock & safety stock field in on report.
In MB52, I get the stock but not safety stock of material.
Is it possible to add safety stock field in MB52 Report?
Please provide the solution if you have.
KuldeepHi Kuldeep,
The safety stock u can get from the MARA table if u want to include that in the report then create Zreport
this is not available in MB52 report
Regards,
Zeeshu -
Unable to generate a multiple field nVision report from a layout
Hi,
I have developed an nVision layout that lists the Budget Vs Actuals for specific Account nodes from an Account tree and works well . But as per the requirement, I am needed to include a second chartfield (CLASS_FIELD) in the report. In other words, the report needs to show the Budget Vs Actual amounts for all the Class Fields associated with each Account. For this , I have added column criteria for Budget and Actuals, and row criteria for Accounts , but I am stuck at adding the second Chartfield criteria at the row level , which is CLASS_FLD (for example, Labor and Other); i.e On the same row that I added ACCOUNT criteria, I have added additional Field in the Layout Defintion > Filter > Fields and Dimensions – added CLASS_FLD after ACCOUNT. When I run the report, the results show only the breakdown by Account but not with the additional Class field values.
I am aware we could achieve this by a Drilldown but the users are looking this in the original layout itself. Please advise. thank you!!Hi Mr.Bob,
Sorry I forgot to thank you in my earlier post...thanks a lot for your input
--Raghu -
Adding Additional field "Supplier name" & "Supplier No" in MB5B Report?
Can i add the above stated two additional fields in the standard report of MB5b, is there any implicit enhancement in the standard report which can help achieve my objective?
Hi,
The possibility to include additional fields in the report MB5B is
limited to MSEG, just as you can see in the text of the
report RM07MLBD_CUST_FIELDS itself:
This include contains the structure for additional fields for report
RM07MLBD ( transaction MB5B )
the following fields are not shown in the list of report
RM07MLBD
If you want to insert some of these fields in the list of the
hidden fields delete the '*' in the type definition.
>>* There are only fields from database table MSEG possible <<<<<<<<<<<
Please use only the following fields, because these fields
are considered during the creation of the field catalog;
plaese consider, that each active field will cost performance
If you need to add aditional information from other tables, like the
Reference Document Number you will need to build your own query.
Regards,
Mauro -
Sap query and additional fields.
Hello guys.
ABAP it's not my strong skill, but i need to develop some report.
What i need:
input: material, SLED, plant
output: material, SLED, plant, values from characteristic field.
I have created sap query with additional field type c.
Below my code:
TYPES: BEGIN OF charast,
ATNAM(50) TYPE c,
ATWTB(8) TYPE n,
X(50) TYPE n,
C(50) TYPE n,
ATINN(50) TYPE n,
END OF charast.
DATA: char TYPE TABLE OF charast WITH HEADER LINE.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
EXPORTING
MATNR = MCH1-MATNR
CHARG = MCH1-CHARG
GET_CLASSIFICATION = 'X'
TABLES
CHAR_OF_BATCH = char.
LOOP AT char into TEST (This is an additional field type C.
ENDLOOP.
Questions:
1. How i can return internal table into standard abap type, because i can create additional field only with standart types.
2. Need i fetch exporting parameters before calling FM? Or sap query do it automatically, based on given values on selection screen of the report?
3. How i can return only needed field from FM output? Now, when i'm executing FM via SE37 it's show desired result, but when i'm getting it from code i see strange values.
4. If i don't know exactly return by an FM values, how i can fill structure dynamically?
5. How i can return result of a program not only to additional field but to layout?
Sorry for noob questions and thank you in advance guys!Well, seems like it work fine for me.
Below my crappy, but working code:
DATA: material TYPE MCHB-MATNR,
batch TYPE MCHB-CHARG,
plant TYPE MCHB-WERKS,
sloc TYPE MCHB-LGORT,
gtdt TYPE STANDARD TABLE OF clbatch,
gtdit TYPE clbatch.
SELECT MATNR INTO material FROM MCHB
WHERE MATNR = MCHB-MATNR.
ENDSELECT.
SELECT CHARG INTO batch FROM MCHB
WHERE CHARG = MCHB-CHARG.
ENDSELECT.
SELECT WERKS INTO plant FROM MCHB
WHERE WERKS = MCHB-WERKS.
ENDSELECT.
SELECT LGORT INTO sloc FROM MCHB
WHERE LGORT = MCHB-LGORT.
ENDSELECT.
CALL FUNCTION 'VB_BATCH_GET_DETAIL'
EXPORTING
MATNR = material
CHARG = batch
WERKS = plant
GET_CLASSIFICATION = 'X'
TABLES
CHAR_OF_BATCH = gtdt.
READ TABLE gtdt INTO gtdit
WITH KEY atnam = 'BATCH_SHELF_LIFE_EXPIRY_DATE'.
GTD = gtdit-ATWTB. -
Additional field in infotype 0009 issue ( PBO and PAI )
Hi Guru,
I need your help please.
I have a additional field in IT0009 and when I want created a new infotype 0009, I fill all field but after ENTER or SAVE all field are save in the layout but not the additional field.
To save the additional field in the layout, I must fill it again and after the ENTER or SAVE the field is save in the layout.
I have checked in the debbugger, when I create a new infotype 0009 it goes to the PBO but after ENTER or SAVE it doesn't go to the PAI so I must do it again ( fill the additional field and ENTER or SAVE ) and then it goes to the PAI.
Thus I would like to know how I can make so that after the ENTER or SAVE the screen goes in PAI before the PBO and at the first time.
Thanks very much in advance.
Regards.Hi Srini Vas, hi Pedro Guarita and thanks for your reply,
After more investigation, the probleme come from a check over country bank.
In fact, the screen of the infotype 0009 must be adpated following the country bank but to do this, the standard module pool (mp000900) check if the country bank have changed.
call method cl_hrpad00_iban=>process_iban_pai
changing
cs_bankdata = ls_bank_data_current
exceptions
error_iban = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
call method cl_hrpad00_iban=>get_bank_data_old
importing
bank_data_old = ls_bank_data_old.
if ls_bank_data_current-banks <> ls_bank_data_old-banks. "MELN1357200
bank country changed -> leave screen needs to be done
leave_screen = 'X'.
endif.
But when you create a new infotype 0009, the ls_bank_data_old-banks is always initial. So when module pool compared the ls_bank_data_old-banks with the ls_bank_data_current-banks, those are always different.
In conclusion, when you create a new infotype 0009 it is always mandatory to push ENTER before to fill any additional field because at each first time that the standard module pool go in the PAI, it make a leave screen.
Thanks in advance for all yours reply. -
Additional field in FB03 and FBV0
I want one additional field in the layout i.e. document amount, which is not available at present. How to do.
Hi
You need to find additonal field details from functional consultant & ABAP'er.
After that you need to create Z message type with that additional field/segment and further assign it to IDOC.The process is as follows :
1)Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
2)Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message u201CThe table is cross-client (see Help for further info)u201D. Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Gud Luck -
How to add additional fields to zreport which contains standard report code
Hi Experts,
In order to add additional fields to standard report i copied the code into zreport but i am unable to add additonal field into report because the code is looking so complex.
standard report:AQZZ/SAPQUERY/FKF1============
or
sapmenu->accounting->financial accounting->accounts payable->information system->reports for accounts payable accounting->master data->S_ALR_87012087-Addresslist.
Additional feilds to add is :Region,company code,country
Please let me know how toidentify ALV and guide me how to solve this.
Regards,
naresh.Hello Naresh,
First check whether these three fields are available in the text elements area.
Please write your code in the subroutine %comp_ldesc.
Repeat the code for your three new fields
perform ldesc(rsaqexce) using 'G00010000X010 00 A1'
%txt1 %txt2 %txt3 'LFA1-LIFNR' LFA1-LIFNR 'LFA1-LIFNR'.
read table %textpool_langu into %textpool_langu_line
with key ID = 'I' key = 'A01'.
if sy-subrc is initial. %txt1 = %textpool_langu_line-entry.
else. %txt1 = %txt_unknown.
endif.
So this subroutine will give you the basic list. Now Program is creating ALV with this basic list. So I think you don't need to worry about that. Please have a thorugh look at the code over this perform, and write accordingly.
I think this is enoogh.
Please update if you got the solution, which will be informative for others.
regards,
Antony Thomas
Edited by: Antony Thomas on Jul 27, 2010 7:57 AM -
How to add/create additional page in Crystal Report Layout SAP B1
Hi,
I wanna ask about How to add/create additional page in Crystal Report Layout SAP B1 ?
I want when user print Purchase Order then on last page also print some page like Penalty Clause etc.
Pls help me to find the solution.
Br,
Thomas MarsetyoHi,
In your report footer, set it to create a new page before it is printed (In 'Section Expert', select the Report Footer -> 'Paging' tab -> Check 'New Page Before' checkbox). Throw your Terms & Conditions into the Report Footer section.
If you already have a Report Footer that you want to keep, just split the footer into two sections (Right-click the Report Footer section -> 'Insert Section Below') and follow the same procedure for the newly created section.
Check this Link
http://stackoverflow.com/questions/9232239/adding-an-additional-page-to-end-of-a-crystal-report
http://www.crystalreportsbook.com/forum/forum_posts.asp?TID=18960
Regards,
Manish -
How to add additional field to the existing report
hi,
report name is RHXPE_EXPIRED_QUALI
if u execute report alv list is genereted with like this.
object type, id of related object, object name, object type, id of related object,last name, first name like this
where can i get these field descriptios in the prigram becoz many perform ststements r there. i want to add additional field text.
program is:
CORRECTIONS
DATE CORRECTION NOTE AUTHOR DESCRIPTION
09.03.2001 0388404 XSC Wrong list output for multiple Os
05.06.2001 AL0K023393 0410219 Lud Wrong keydate for search with
Pchbegda and pchendda.
30.01.2002 S6BK000033 0491055 TS Report: RHXPE_EXPIRED_QUALI
doesn't provide a spool list.
REPORT rhpk_find_pers_with_expired_qu MESSAGE-ID pq.
TABLES : pchdy.
INCLUDES
INCLUDE rhxmacro.
INCLUDE rhpeini0.
TABLES
DATA: objects LIKE hrsobid OCCURS 1 WITH HEADER LINE.
VARIABLES
DATA: subrc LIKE sy-subrc.
DATA: orgeh_text LIKE t777o-otext.
SELECTION SCREEN
objid
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
pchplvar LIKE p1000-plvar NO-DISPLAY, "plan version
pchotype LIKE pchdy-otype NO-DISPLAY. "objecttype
Objid
rhx-f4-objid-data.
SELECT-OPTIONS: pchobjid FOR pchdy-objid_str NO INTERVALS.
Search
PARAMETERS:
pchseark LIKE pchdy-seark. "matchcode object plom.
SELECTION-SCREEN END OF BLOCK b1.
Objecttime
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-001.
PARAMETERS: se_begd LIKE p1000-begda DEFAULT sy-datum, "'19000101',
se_endd LIKE p1000-endda DEFAULT high_date.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-005.
PARAMETERS:
h_events LIKE dynp_rhpp-gen_train, "with training sugg
h_qual LIKE dynp_rhpp-expired_qual. "with Qual
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN ON pchobjid.
PERFORM check_objid_sign(rhxchk00) USING pchobjid-sign.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pchobjid-low.
rhx-f4-objid-low pchplvar pchotype pchobjid '' ''.
AT SELECTION-SCREEN.
PERFORM check_plvar(rhxchk00) USING pchplvar.
PERFORM check_seark(rhxchk00) TABLES pchobjid
USING pchseark pchplvar pchotype.
INITIALIZATION
INITIALIZATION.
PERFORM read_t77s0_parameters_for_pe.
get user parameters/Planvariante und Beginndatum setzen:
pchotype = $orgeh.
CALL FUNCTION 'RHP0_USER_PARAMETERS_GET'
EXPORTING
fill_if_initial = 'X'
IMPORTING
plvar = pchplvar
begda = se_begd
endda = se_endd
with_key =
SUBSTITUTE =
ESSENTIAL = only_essential
org_unit = pchobjid-low
EXCEPTIONS
OTHERS = 0.
SE_BEGD = LOW_DATE. "Correction AL0K023393 0410219
IF NOT pchobjid-low IS INITIAL.
pchobjid-sign = 'I'.
pchobjid-option = 'EQ'.
APPEND pchobjid.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
correction 0491055
correction was done for getting a spool list in background-processing.
CASE sy-batch.
WHEN space.
SUBMIT rhpe_expired_quali
WITH pchplvar = pchplvar
WITH pchotype = pchotype
WITH pchobjid IN pchobjid
WITH pchbegda = se_begd
WITH pchendda = se_endd
WITH h_qual = h_qual
WITH h_events = h_events
AND RETURN.
WHEN 'X'.
SUBMIT rhpe_expired_quali
WITH pchplvar = pchplvar
WITH pchotype = pchotype
WITH pchobjid IN pchobjid
WITH pchbegda = se_begd
WITH pchendda = se_endd
WITH h_qual = h_qual
WITH h_events = h_events
TO SAP-SPOOL.
ENDCASE.
END-OF-SELECTION
END-OF-SELECTION.Hi,
I think you need to show more programs.
you said, the report program is 'RHXPE_EXPIRED_QUALI', but you upload 'rhpk_find_pers_with_expired_qu' program.
usually, ALV field is modifyed in 'PERFORM fieldcatalog_modify', if you use Functional ALV.
Try to search 'fieldcatalog function', you will find easy.
Regard,
SY Kim -
How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN
i am facing problem in Report RMclobjvn , TCODE is CL6BN
i have to add some additional fields on the result screen.
but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
<b>Exit name
CLCLRS01 Additional Fields on the Result Screen
CLCLRS02 Fill the Additional Fields on the Result Screen</b>
i activated the these exits and have tried putting in break point in side the include.
But the problem is this that
[<b>b]that CL6BN Tcode is not triggering anyhow these userexits.</b></b>
does anyone has any solution for adding the additional fields.Hai Manish
Check the following Links
You can do it in two ways using append structure or include structure of that standard table.
once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
check this SAP help..
for append structure
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
for include structure.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
Regards
Sreeni
Maybe you are looking for
-
I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click
-
Hello everyone. I have a strange situation. Some times I have unfinished flows. The reason seems to be that some mappings (not specific ones) have status complete, start time and finished time the same and result null. After all my mappings I check f
-
Where can I buy Keynote 5.3
Hi, I am on Mountain Lion and do NOT want to upgrade to Mavericks right away. But I absolutely need to run Keynote. I used to have an iWork 09 DVD which I have misplaced so I am trying to buy Keynote 5.3 from the App Store but I can only find Keynote
-
AVG tried to take over the Firefox Program. I unchecked some stuff on AVG and now Firefox doesn't look right. There is only a bar at the top of the page with "Firefox" and "new Tab" . How do I get the Firebox homepage back?
-
How to change username and password
How can you change username and password for icloud under settings on iPhone?