Additional installer issue - NI system component missing - DVD

Hi,
I have trouble building my installer... when I try to add DAQ and Measeurement & automation explorer, the setup is asking me to provide file (that in my head are supose to be already in my PC). It says to find NI system component on DVD 1 of develloper suite.
When I insert DVD1 of the labview DVD I received to install Develloper suite on my PC, it tells me wrong DVD!!!!! I understand nothing... see pictures... what is the problem???
Thank you for helping.
ET
Attachments:
images.docx ‏172 KB

I assume that the additional installers you are refering to are programs you are installing from the Developer Suite DVDs, and not something you are installing from an installer you built - right?
The NI Device Driver 2014 DVD does not include "all" drivers - but rather the most recent version of each. If you would like to see which versions are included, take a look at the following link, in the Description section:
http://www.ni.com/download/ni-device-drivers-2014.02/4634/en/
Your 2014 DVD is asking you to provide the 2012 DVD?
Regards,
Shane C
Applications Engineer
National Instruments

Similar Messages

Upgrade to LabVIEW 2012 caused Additional Installers issue

Hello again all you helpful forum-goers!
I have been using LabVIEW 2010 (SP1) for a while on my Windows XP computer, but I recently purchased and installed LabVIEW 2012 for a future project. In the meantime, my previous projects must still use LabVIEW 2010 until I use my company's formal change tracking system to upgrade them. However, when I recently opened one of my older projects in 2010 to update it and rebuild the installer, I saw in the Additional Installers tab a bunch of blank lines at the end of the list (see attached screenshot). This doesn't directly hurt me, but I have to think it is a symptom of the root problem.
More directly relevant, the NI VISA Run-Time 5.0.3 that had been checked previously was now missing, and the NI VISA Run-Time 5.2 that had replaced it was NOT checked. That seems like an upgrade oops on National Instruments' part to me. I decided it was just a quirk, and that the 2012 installer had replaced my 5.0.3 version with the 5.2 version (deleting the old version), so I checked the 5.2 version to build my installer, and after requiring my DVD to copy the software to my computer, that seemed to work ok.
Now the immediate problem: when I distributed the project file to a colleague who only has LabVIEW 2010, she was not able to build my software's installer, because it asked her for the "FADEC_Emulator" disk. "FADEC_Emulator" is the name of my software. Expanding the error dialog showed that it wanted that disk in order to get access to NI VISA Run-Time 5.0.3. Opening the properties of the installer in the project file within LabVIEW showed NI VISA Run-Time 5.0.3 checked. However, opening the project file with Wordpad showed that NI VISA Run-Time 5.2 was listed as an additional installer (and NOT 5.0.3). Maybe her system saw that I wanted NI VISA Run-Time 5.2, and automatically replaced it with the latest version it had, 5.0.3? Confusing! And if it did that, why didn't it have that version handy already? And switching versions like that seems like it would be a bad idea to do silently, in case I was relying on a feature specific to the new version.
I'm afraid that since installing LabVIEW 2012 my system has gotten into an unstable state, and I now have possibly corrupted my project's LV project file. I need to have both 2010 and 2012 on my computer for the time being.
Does anyone have any idea what is going on with my system, and/or how to fix it?
Thank you very much in advance for your suggestions and time!
-Joe
Solved!
Go to Solution.
Attachments:
Additional Installers Blank Lines.png ‏45 KB

Hi Joe,
I tried to reproduce your issues, and encountered mixed results. Please verify with what I've provided below that we are testing under the same conditions
jmorris wrote:
More directly relevant, the NI VISA Run-Time 5.0.3 that had been checked previously was now missing, and the NI VISA Run-Time 5.2 that had replaced it was NOT checked. That seems like an upgrade oops on National Instruments' part to me. I decided it was just a quirk, and that the 2012 installer had replaced my 5.0.3 version with the 5.2 version (deleting the old version), so I checked the 5.2 version to build my installer, and after requiring my DVD to copy the software to my computer, that seemed to work ok.
In this scenario, I built a test project with VISA RT 5.0.3 and LabVIEW 2010 configuration. I then installed LabVIEW 2012 and VISA 5.2.0 on top of the aforementioned setup. When I opened the 2010 project in 2012, VISA Run-Time 5.2 was checked (as expected, dissimilar to your configuration). As I mentioned earlier, this may have been because VISA 5.2.0 did not install properly.
jmorris wrote:
Now the immediate problem: when I distributed the project file to a colleague who only has LabVIEW 2010, she was not able to build my software's installer, because it asked her for the "FADEC_Emulator" disk. "FADEC_Emulator" is the name of my software. Expanding the error dialog showed that it wanted that disk in order to get access to NI VISA Run-Time 5.0.3. Opening the properties of the installer in the project file within LabVIEW showed NI VISA Run-Time 5.0.3 checked. However, opening the project file with Wordpad showed that NI VISA Run-Time 5.2 was listed as an additional installer (and NOT 5.0.3). Maybe her system saw that I wanted NI VISA Run-Time 5.2, and automatically replaced it with the latest version it had, 5.0.3? Confusing! And if it did that, why didn't it have that version handy already? And switching versions like that seems like it would be a bad idea to do silently, in case I was relying on a feature specific to the new version.
For this case, I built the installer on LabVIEW 2012 with VISA RT 5.2.0 then saved it for LabVIEW 2010 compatiblity. When I opened the installer in a LabVIEW 2010 with VISA 5.0.3 environment, VISA 5.0.3 was checked (as expected since LabVIEW will default to the latest version of VISA on the PC regardless of what the original installer referenced). I did, however, see three extra blank lines in the additional installers tab (more on this below) . I also tried to build the installer as you indicated, but did not get any prompts for disks and was able to build successfully.
One thing to keep in mind is that LabVIEW by default will use the version of the driver that is installed on the build PC, regardless of whether it is newer or older than the installer references. If you feel this negatively impacts your successes as a developer, please feel free to post a feature request (e.g. for a prompt when the driver version changes) in our idea exchange forum (http://forums.ni.com/t5/LabVIEW-Idea-Exchange/idb-p/labviewideas ).
Lastly, regarding the empty lines in the additional installer specifications, this problem appears to be fixed in LabVIEW 2012 and only manifests itself in 2010. During my course of testing, this did not affect building the installers and is a minor inconvenience which has been fixed in subsequent versions.
Please let me know if you have any additional questions/comments regarding these issues.
Regards
Doug W
Applications Engineer
National Instruments

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Oracle 11g R2 Client Silent Installation Issue (PATH) Windows 7 x86

Hi All,
I'm hoping somebody can shed some light on this issue.
I created a Response file using the 'Save Response File' method during an interactive installation on a Windows 7 Enterprise x86 client. (file enclosed)
I have installed it multiple times now with multiple permutations of the command line (got caught out by the old lower case F in responseFile) but now I'm getting the same error each time (a critical error with the PATH according to the installation log). There is nothing wrong with the path length as the installation works fine in GUI mode and passes the Prereq check.
I launch the command line to install (with Run As Administrator) - "[location of setup.exe]\setup.exe" -nowait -silent -responseFile "[location of response file]\Oracle11gv2.rsp"
RESPONSE FILE:
## Copyright(c) Oracle Corporation 1998,2008. All rights reserved. ##
## Specify values for the variables listed below to customize ##
## your installation. ##
## Each variable is associated with a comment. The comment ##
## can help to populate the variables with the appropriate ##
## values.                                   ##
# Do not change the following system generated value.
oracle.install.responseFileVersion=/oracle/install/rspfmt_clientinstall_response_schema_v11_2_0
# This variable holds the hostname of the system as set by the user.
# It can be used to force the installation to use an alternative
# hostname rather than using the first hostname found on the system
# (e.g., for systems with multiple hostnames and network interfaces).
ORACLE_HOSTNAME=
# Unix group to be set for the inventory directory.
UNIX_GROUP_NAME=
# Inventory location.
INVENTORY_LOCATION=C:\Program Files\Oracle\Inventory
# Specify the languages in which the components will be installed.
# en : English ja : Japanese
# fr : French ko : Korean
# ar : Arabic es : Latin American Spanish
# bn : Bengali lv : Latvian
# pt_BR: Brazilian Portuguese lt : Lithuanian
# bg : Bulgarian ms : Malay
# fr_CA: Canadian French es_MX: Mexican Spanish
# ca : Catalan no : Norwegian
# hr : Croatian pl : Polish
# cs : Czech pt : Portuguese
# da : Danish ro : Romanian
# nl : Dutch ru : Russian
# ar_EG: Egyptian zh_CN: Simplified Chinese
# en_GB: English (Great Britain) sk : Slovak
# et : Estonian sl : Slovenian
# fi : Finnish es_ES: Spanish
# de : German sv : Swedish
# el : Greek th : Thai
# iw : Hebrew zh_TW: Traditional Chinese
# hu : Hungarian tr : Turkish
# is : Icelandic uk : Ukrainian
# in : Indonesian vi : Vietnamese
# it : Italian
# Example : SELECTED_LANGUAGES=en,fr,ja
SELECTED_LANGUAGES=en,en_GB
# Complete path of the Oracle Home
ORACLE_HOME=C:\Oracle\product\11.2.0\client_1
# Complete path of the Oracle Base.
ORACLE_BASE=C:\Oracle
#Name : INSTALL_TYPE
#Datatype : String
#Description: Installation type of the component.
# The following choices are available. The value should contain
# only one of these choices.
# InstantClient : InstantClient
# Administrator : Administrator
# Runtime : Runtime
# Custom : Custom
#Example : INSTALL_TYPE = "Administrator"
oracle.install.client.installType=Custom
# Name : oracle.install.client.customComponents
# Datatype : StringList
# This property is considered only if INSTALL_TYPE is set to "Custom"
# Description: List of Client Components you would like to install
# The following choices are available. You may specify any
# combination of these choices. The components you choose should
# be specified in the form "internal-component-name:version"
# Below is a list of components you may specify to install.
# oracle.sqlj:11.2.0.1.0 -- "Oracle SQLJ"
# oracle.rdbms.util:11.2.0.1.0 -- "Oracle Database Utilities"
# oracle.javavm.client:11.2.0.1.0 -- "Oracle Java Client"
# oracle.sqlplus:11.2.0.1.0 -- "SQL*Plus"
# oracle.dbjava.jdbc:11.2.0.1.0 -- "Oracle JDBC/THIN Interfaces"
# oracle.ldap.client:11.2.0.1.0 -- "Oracle Internet Directory Client"
# oracle.rdbms.oci:11.2.0.1.0 -- "Oracle Call Interface (OCI)"
# oracle.precomp:11.2.0.1.0 -- "Oracle Programmer"
# oracle.xdk:11.2.0.1.0 -- "Oracle XML Development Kit"
# oracle.network.aso:11.2.0.1.0 -- "Oracle Advanced Security"
# oracle.assistants.oemlt:11.2.0.1.0 -- "Enterprise Manager Minimal Integration"
# oracle.oraolap.mgmt:11.2.0.1.0 -- "OLAP Analytic Workspace Manager and Worksheet"
# oracle.network.client:11.2.0.1.0 -- "Oracle Net"
# oracle.ordim.client:11.2.0.1.0 -- "Oracle Multimedia Client Option"
# oracle.ons:11.2.0.0.0 -- "Oracle Notification Service"
# oracle.odbc:11.2.0.1.0 -- "Oracle ODBC Driver"
# oracle.has.client:11.2.0.1.0 -- "Oracle Clusterware High Availability API"
# oracle.dbdev:11.2.0.1.0 -- "Oracle SQL Developer"
# oracle.rdbms.scheduler:11.2.0.1.0 -- "Oracle Scheduler Agent"
# Example : oracle.install.client.customComponents="oracle.precomp:11.2.0.1.0","oracle.ons:11.2.0.0.0","oracle.oraolap.mgmt:11.2.0.1.0","oracle.rdbms.scheduler:11.2.0.1.0"
oracle.install.client.customComponents=oracle.rdbms.util:11.2.0.1.0,oracle.sqlplus:11.2.0.1.0,oracle.dbjava.jdbc:11.2.0.1.0,oracle.rdbms.oci:11.2.0.1.0,oracle.network.client:11.2.0.1.0,oracle.odbc:11.2.0.1.0,oracle.oo4o:11.2.0.1.0,oracle.ntoledb:11.2.0.1.0,oracle.ntoledb.odp_net_2:11.2.0.1.0,oracle.aspnet_2:11.2.0.1.0
#Name : MTS_PORT
#Datatype : int
#Description: Port number to be used for by the Oracle MTS Recovery Service to listen
#          for requests. This needs to be entered in case oracle.ntoramts is
#     selected in the list of custom components in custom install
#Example : MTS_PORT = 2030
oracle.install.client.oramtsPortNumber=49152
# Host name to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example : oracle.install.client.schedulerAgentHostName = acme.domain.com
oracle.install.client.schedulerAgentHostName=
# Port number to be used for by the Oracle Scheduler Agent.
# This needs to be entered in case oracle.rdbms.scheduler is selected in the
# list of custom components during custom install
# Example: oracle.install.client.schedulerAgentPortNumber = 1500
oracle.install.client.schedulerAgentPortNumber=
LOG FILE TO FOLLOW

LOG FILE:
Using paramFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\oraparam.ini
The commandline for unzip:
Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\unzip -qqqo ..\stage\Components\oracle.jdk\1.5.0.17.03\1\DataFiles/"*.jar" -d "C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM" INFO: Loading data from: jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Restoring class oracle.install.driver.oui.ConfigCmdMappings from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/installcommons_1.0.0b.jar!/oracle/install/driver/oui/resource/ConfigCommandMappings.xml
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
INFO: Completed verification of target environment.
INFO: Inventory exists: false
INFO: Registering setup bean
INFO: Validating Response File Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\response\Oracle11gv2.rsp
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Setting Response file data to the Installer
WARNING: Unable to find the namespace URI. Reason: Start of root element expected.
INFO: Building Flow
INFO: Building the flow graph
INFO: Loaded state init
INFO: Loaded state clientInstallType
INFO: Loaded state productLanguage
INFO: Loaded state getOracleHome
INFO: Loaded state prereqExecutionDecider
INFO: Loaded state checkPrereqs
INFO: Loaded state postPrereqs
INFO: Loaded state summary
INFO: Loaded state clientCustomInstall
INFO: Loaded state schedulerAgent
INFO: Loaded state mtsDialog
INFO: Loaded state setup
INFO: Loaded state finish
INFO: Linking states
INFO: State[checkPrereqs]: route=success; to=summary
INFO: State[clientCustomInstall]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[clientCustomInstall]: route=TO_ORAMTS; to=mtsDialog
INFO: State[clientCustomInstall]: route=TO_SCHEDULERAGENT; to=schedulerAgent
INFO: State[clientInstallType]: route=ic_no; to=productLanguage
INFO: State[clientInstallType]: route=ic_yes; to=getOracleHome
INFO: State[getOracleHome]: route=INVENTORY_NO; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_NO_CUSTOM_YES; to=clientCustomInstall
INFO: State[getOracleHome]: route=INVENTORY_YES; to=prereqExecutionDecider
INFO: State[getOracleHome]: route=INVENTORY_YES_CUSTOM_YES; to=clientCustomInstall
INFO: State[init]: route=success; to=clientInstallType
INFO: State[mtsDialog]: route=success; to=prereqExecutionDecider
INFO: State[postPrereqs]: route=CUSTOM; to=clientCustomInstall
INFO: State[postPrereqs]: route=NON_CUSTOM; to=summary
INFO: State[prereqExecutionDecider]: route=executeprereqs; to=checkPrereqs
INFO: State[prereqExecutionDecider]: route=ignoreprereqs; to=summary
INFO: State[productLanguage]: route=productlanguage_yes; to=getOracleHome
INFO: State[schedulerAgent]: route=TO_ENDCUSTOM; to=prereqExecutionDecider
INFO: State[schedulerAgent]: route=TO_ORAMTS; to=mtsDialog
INFO: State[setup]: route=success; to=finish
INFO: State[summary]: route=success; to=setup
INFO: Successfully built the flow
INFO: Opening bean stores from which the beans can be loaded
INFO: Changing the format to extended property file format to merge the flowDataDefaults with the flowDataSource
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/response/Oracle11gv2.rsp
INFO: Translating external format into raw format
INFO: Loaded BeanStore using the flow data source
INFO: Registering the flow data beans
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
INFO: [INS-07001] Value for property 'UNIX_GROUP_NAME' not found in the bean store.
INFO: [INS-07001] Value for property 'INVENTORY_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'SELECTED_LANGUAGES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_RESPONSE_FILE' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_USERNAME' not found in the bean store.
INFO: [INS-07001] Value for property 'MYORACLESUPPORT_PASSWORD' not found in the bean store.
INFO: [INS-07001] Value for property 'DECLINE_SECURITY_UPDATES' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_HOST' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PORT' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_USER' not found in the bean store.
INFO: [INS-07001] Value for property 'PROXY_PWD' not found in the bean store.
INFO: [INS-07001] Value for property 'SECURITY_UPDATES_VIA_MYORACLESUPPORT' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_FAILURES' not found in the bean store.
INFO: [INS-07001] Value for property 'COLLECTOR_IGNORE_CONFIGURATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOSTNAME' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
WARNING: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
WARNING: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
WARNING: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
WARNING: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: [INS-07001] Value for property 'OCMSettings' not found in the bean store.
INFO: Set value for bean ClientSetupBean
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_WindowsSystemDirectory' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_LaunchNetCA' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_NoMigration' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_RACInstall' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_ConfigurationType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_InstallEdition' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_OraMTSPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentHostName' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_client_SchedulerAgentPortNumber' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.client.bean.ClientInstallSettings. Reason: [INS-07001] Value for property 'ClientInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.CustomInstallGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.SchedulerAgentGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.OraMTSGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallLocationGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.InstallTypesGUI viewId: null uiType: null]
INFO: Adding View[type: oracle.install.ivw.client.view.FinishGUI viewId: null uiType: null]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\cl
ient\install\../stage/products.xml
INSTALL_TYPE Custom
INVENTORY_LOCATION C:\Program Files\Oracle\Inventory
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE C:\Oracle
ORACLE_HOME C:\Oracle\product\11.2.0\client_1
ORACLE_HOSTNAME GBA-P74444432
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en","en_GB"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_CustomComponents {"oracle.rdbms.util:11.2.0.1.0","oracle.sqlplus:11.2.0.1.
0","oracle.dbjava.jdbc:11.2.0.1.0","oracle.rdbms.oci:11.2
.0.1.0","oracle.network.client:11.2.0.1.0","oracle.odbc:1
1.2.0.1.0","oracle.oo4o:11.2.0.1.0","oracle.ntoledb:11.2.
0.1.0","oracle.ntoledb.odp_net_2:11.2.0.1.0","oracle.aspn
et_2:11.2.0.1.0"}
oracle_install_client_OraMTSPortNumber 49152
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in SILENT mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/Z:/Source Media/KM0399 - Oracle 11g/win32_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1046.229476928711
INFO: PATH has :==>C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\jdk\jre\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\AdminStudio\11.5\Common\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO_CUSTOM_YES
INFO: Verifying route INVENTORY_NO_CUSTOM_YES
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientCustomInstall
INFO: Re-loading component config bean
INFO: Loading beanstore from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.commons.base.util.ComponentConfig from jar:file:/C:/Users/DesktopAdmin/AppData/Local/Temp/OraInstall2013-02-26_08-36-31AM/ext/jlib/instclient.jar!/oracle/install/ivw/client/resource/custom_components.xml
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
WARNING: [INS-07001] Value for property 'dependants' not found in the bean store.
INFO: Resolving dependencies
INFO: Completed executing action at state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientCustomInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <clientCustomInstall>
INFO: Completed validating state <clientCustomInstall>
INFO: Verifying route TO_ENDCUSTOM
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Custom.xml
INFO: refDataFile: Z:\Source Media\KM0399 - Oracle 11g\win32_11gR2_client\client\stage\cvu\oracle.client_Custom.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Nodes are prepared for verification.
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:128MB (131072.0KB)
INFO: Actual Value:1023.5547MB (1048120.0KB)
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Free Space: GBA-P74444432:C:\Users\DESKTO~1\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:130MB
INFO: Actual Value:21.3053GB
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:SUCCESSFUL
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
INFO: Expected Value:32-bit
INFO: Actual Value:32-bit
INFO: -----------------------------------------------
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:GBA-P74444432
WARNING: Result values are not available for this verification task
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Adding ExitStatus PREREQUISITES_NOT_MET to the exit status set
SEVERE: [FATAL] [INS-13013] Target environment do not meet some mandatory requirements.
CAUSE: Some of the mandatory prerequisites are not met. See logs for details. C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log
ACTION: Identify the list of failed prerequisite checks from the log: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Then either from the log file or from installation manual find the appropriate configuration to meet the prerequisites and fix it manually.
INFO: Advice is ABORT
INFO: Adding ExitStatus INVALID_USER_INPUT to the exit status set
INFO: Completed validating state <checkPrereqs>
INFO: Terminating all background operations
INFO: Terminated all background operations
WARNING: A log of this session is currently saved as: C:\Users\DESKTO~1\AppData\Local\Temp\OraInstall2013-02-26_08-36-31AM\installActions2013-02-26_08-36-31AM.log. Oracle recommends that if you want to keep this log, you should move it from the temporary location to a more permanent location.
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Client Installer
INFO: Unloading Setup Driver

[Forum FAQ] Three helpful ways for analyzing Inventory issues in System Center 2012 Configuration Manager

To troubleshoot issues related to Inventory, we can view the related logs or force a full inventory to analyze the reason. In these article, we mainly introduce
the detailed ways to enable Verbose and Debug logging,
save the inventory report and force a full inventory on the client.
How to force a full inventory on the client
1. Open wbemtest and connect to “root\ccm\invagt”.
Figure 1.
2. Click “Enum Classes…”and then click “OK”.
Figure 2.
In the Query Result, you can view the cache for each entry. (Figure 3)
{00000000-0000-0000-0000-000000000001}
Hardware Inventory
{00000000-0000-0000-0000-000000000002}
Software Inventory
{00000000-0000-0000-0000-000000000003}
Heartbeat
{00000000-0000-0000-0000-0000000000010} File Collection
Figure 3.
3. You can highlight the entry that contains the action you want to force a full to be sent and click “Delete” to delete it:
Figure 4.
4. Close all wbemtest dialog boxes and initiate the appropriate action in the Client Agent Action to perform a full inventory.
Figure 5.
How to enable
Verbose and Debug logging
It is also helpful to trace the flow if you enable Verbose and Debug logging on the client,
Management Point and Site Server.
To set verbose/debug logging on an SCCM client or
Management Point, you can simply edit (or create) the following registry keys:
HKLM/Software/Wow6432Node/Microsoft/CCM/Logging/@Global/LogLevel to 0
HKLM/Software/Wow6432Node/Microsoft/CCM/Logging/DebugLogging/Enabled to True
Figure 6.
Figure 7.
On the site server, you edit the following registry key to enable verbose logging and then restart the SMS_Executive (or the state system
component):
HKLM/Software/Wow6432Node/Microsoft/SMS/Components/SMS_STATE_SYSTEM/Verbose Logging – Reg_DWORD set to 1
Figure 8.
How to save the inventory report
To force the ConfigMgr client to save off a copy of the report that it sends to the Management Point, you can create an empty folder/directory under the inventory temp directory
called archive_reports.sms.
Then edit the following registry value to point to the inventory temp directory:
HKLM\Software\Microsoft\SMS\Mobile Client\Inventory\ Temp Directory
Figure 9.
Figure 10.
From the figure 9, you can see that the temp directory path is C:\Windows\CCM\Inventory\Temp. After we run the hardware inventory Cycle again, you can see the report file is
saved in the path we have defined automatically. (Figure 10)
(Note: Please delete the
archive_reports.sms folder when have finished the troubleshooting steps to save disk space.)
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi,
I have troubleshooted this error message several times and can say that this is a generic error message. The reason can be different in your Case. As suggested in the error message you should first check all the steps in the following kb article.
http://support.microsoft.com/kb/2742275/tr
In most of my cases the performance counter corruption was the reason of this error message there fore I would suggest you to first check the System and application event logs for performance counter corruption. Right click on the System event > Find
and search for corrupt.
Additionally it is also mentioned in one of the MS kb articles that deploying winrm policies on Hyper-V Host is forbidden in a SCVMM environment.
If this is the reason in your Case you should disable it. No other chance.
Regards,
Cengiz Kuskaya

Operating system is missing

server is not booting to OS mode and showing an error message while trying to boot with c:\ . error message is "operating system is missing"
server has windows 2012 with raid 5 (6hdds) and logical drive is OK. 1st boot controller and boot volumes are set correctly in server bios and raid controller bios. while trying to boot with OS media : does not show repair option. server has critical data
and softwares installed. hence looking for instant help to recover from operating system is missing" scenario

Hi Harsh,
To boot into repair mode, have you check the repair option in the scrrenshot below:
This issue could be caused by:
1.The basic input/output system (BIOS) does not detect the hard disk.
2.The hard disk is damaged.
3.Sector 0 of the physical hard disk drive has an incorrect or malformed master boot record (MBR).
Note Some third-party programs or disk corruption can damage an MBR.
4.An incompatible partition is marked as Active.
5.A partition that contains the MBR is no longer active.
And you can follow these steps to troubleshoot:
Boot into repair mode: repair your computer->troubleshoot->command prompt
1.Run a chkdsk for your main partition (e.g. C:), to do that enter:
chkdsk c: /f/r
2.Bootrec.exe: Repair MBR
/fixmbr
This will create a new Master Boot Record, but will not overwrite your exisiting partition table.
/fixboot
This will add a new boot sector. If you boot sector is damaged you might not be able to start your system.
/rebuildbcd
Scans your disk for Windows server 2012 compatible installations, needed to repair your Windows installation.
3.If you changed the "mark partition as active" option to other partition by mistake, then the error occurred, please try to use the cmd diskpart:
diskpart
list disk
select disk 1
list partition
select partition 1
active
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

Additional installer

I am using LV2012 64 bit. When creating installer, in additional installer category LabVIEW RTE 2012 SP1 is selected. When testing the installer on the deployment machine it requires to install RTE before proceeding with the application installer. For some reason the RTE does not get installed and have to be done separately on deployment pc?
The other question is when using DAQmx which options in Additional installer should be selected so that it installs DAQmx on deployment pc.
TIA.

Depending on what DAQ you have you may need more, but you will need the NI-DAQmx Core Runtime. If you have some cRIO DAQmx you will also likely need the NI-RIO item. Did you do anything with DMMs? You'll need NI-DMM. Serial stuff? NI-VISA Runtime. Each application will need different additional installers, many times it is trial and error based on the error message you get when you try to run the EXE and are missing some component.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

Mac mini having issues with system preferences retaining settings

Mac mini having issues with system preferences retaining settings; this was present with Mavericks and now Yosemite after installation. Did try removing com.apple.systemprefs.plist file (library/preferences folder) to trash, but couldn't find it in trash in order to empty it. Upon reboot the file is still missing. Please don't suggest reloading Yosemite, have very slow internet connection, Yosemite took 7-8 hours to D/L.
Any troubleshooting suggestions out there? thanks

Well, I'd open Font Book, it's included with OSX, & see what it says for Validate & Duplicates.
I would also like to add I am new to Apple computers and I'm doing my best to stay up to par with whats what and understanding!
No problem, we were all new to everything once, do let us know if you need more help or clatification.

Officejet 4635 "operating system files missing"

I've installed the driver software for the officejet 4635 for windows 8 64 bit, but in setting the printer up it gives me the following error message:
"Operating system files missing
The following operating system files are missing and are required to install your printer. Please repair the files using your operating system CD and click Retry to continue installation:
C:\Windows\inf\ntprint.inf"
I've tried reinstalling the software. The computer seems to recognize the device as a fax, but not as a scanner or printer. Anyone wanna help me out?

Hi @pgreene88 ,
I see that you are getting a operating system error, during the installation of the printer. I can help you with this.
System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files. Use the System File Checker tool to repair missing or corrupted system files.
If you get the same results, please consult your computer manufacturer for further assistance.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Installation issue on GRC 7.2.3 on Linux with EBS 12.0.4

I am following doc http://download.oracle.com/otn_hosted_doc/logicalapps/723Install_GrccSuite.pdf to install GRC. I am doing an installation on Linux and in the section where we are installing Concurrent manager server components.
As per doc, I have to source the APPL_TOP and run ladbinstall.bin (I am running in GUI mode and not Silient)
The following is the output.
-bash-3.1$ ladbinstall.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
awk: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
hostname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Launching installer...
grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/tmp/install.dir.32554/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory
I thought that it is not able to find the libraries, so i updated the PATH where libraries are located. I still get the above error. Has anyone come accross this issue and would please share some light on it.
Thanks.
Edited by: user495493 on Jul 17, 2009 7:51 PM

This pulls the value from the APPS Profile
     SQL> select FND_PROFILE.value('APEX_LAUNCHER') from dual ;
     FND_PROFILE.VALUE('APEX_LAUNCHER')
     http://our.group.site:7878
But
String l_launcher = ctx.getProfileStore().getProfile("APEX_LAUNCHER"); ------------- doesn't return http://our.group.site:7878
l_launcher = l_launcher + "/apex/f?p=" + p_application + ":" + p_page;
l_launcher = l_launcher + "::APPS:::" + p_item_names + ":" + p_item_values;
if (ctx!=null) ctx.freeWebAppsContext();
response.sendRedirect(l_launcher);
Instead I get
http://our.app.site:8030/OA_HTML/null/pls/apex/f?p=140:2::APPS::::
Suppose to get
http://our.group.site:7878/apex/f?p=140:2::APPS::::
404 Not Found
Resource /OA_HTML/null/pls/apex/f not found on this server

Issue installing System Update 5.01

Hello all I am having an issue installing System update 5.01. I looked in the logs within the temp directory and it says error 1602 which is user canceled. However, I am not canceling the install. I also tried http://support.microsoft.com/mats/Program_Install_and_Uninstall that didn't work either.
I'm on a T420 with Windows 7 64bit.
Any ideas?
Thanks for your time

I had similar issues installing 5.01. I believe there is something wrong with the package. Here is how I fixed it:
Download installer from http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
Extract package with 7zip
Copy "Lenovo System Update.msi" to "System Update.msi"
Run setup.exe
For some reason the installer was looking for this file and it wasn't there, perhaps running the installer in silent/unattended mode caused it to exit with the code you mentioned.
I hope this fixes your problem too!

How To create a maintenance project - logical component missing?

Hi experts,
we plan to activate ChaRM in our Landscape.
We don't have created a maintenance project in solution_manager cause there is a logical component missing.
I followed the instructions of the tutorial on https://websmp206.sap-ag.de/~sapidb/011000358700006932702005E.sim (Creation of a maintenance project).
I recognized there is the logical component "ZCHANGE REQUEST MANAGEMENT" missing.
This seems to be a modified origin SAP Component.
Does anyone know where to find these component?
Maybe with informations what has to be changed for the Z*copy or is this only a 1:1 copy?
Does anyone have a detailed document for configuring ChaRM on SolMan 7.0 (Mailadress is visible on my business card)
thanks in advance
kind regards
Thomas
Helpful answers/documents will be rewarded, surely!

You need to set up your solution and therefor define a logical component in SMSY. For instance the logical component might consist of your ERP E, Q and P systems.
This logical component is added to an SMI Project. It basically tells the SMI project which systems are involved in the process. After that you will have to create an IMG project, CTS project, release the SMI project to the Change Request Management and generate Maintenance Cycle and Task List (this is all being done in SOLAR_PROJECT_ADMIN).
/cheers

Your system is missing a critical Windows security patch (MS12-020) required to gain access to this system

Hi,
I am trying to install VPN Client from my client site. While installing i am facing the below error.
Your system is missing a critical Windows security patch (MS12-020) required to gain access to this system. Use the link below for more information on installation, or open Windows Update and install all available critical updates. When you're finished updating
your system, log out and try again. If you're still having problems, contact your system administrator.
http://support.microsoft.com/kb/2621440
I went through all the related sites but still i did not find any solution. Under Windows installed updates i could see the security update for Microsoft windows (KB2621440). If its already exist why it is not taking this security patch?
Kindly guide.
Best Regards,
Yadav Kankanwadi

Hi,
Based on Microsoft Security Bulletin MS12-020, this security update resolves two privately reported vulnerabilities:
KB2621440 and KB2667402.
http://technet.microsoft.com/en-US/security/bulletin/ms12-020
Thanks!
Andy Altmann
TechNet Community Support

Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

Additional installer issue - NI system component missing - DVD

Similar Messages

Maybe you are looking for