Additional tab to add in MIGO

Hi Experts,
I need to add an additional tab in header screen of MIGO, but it is overlapping the "Excise Invoice" tab when I activate my tab.
Please suggest how to add a tab without overlapping the existing tab of "Excise Invoice".
Thanks,
Deepanshu

****************************MIGO UI ENHANCEMENT*******************************
Step1 : Run Tcode se19 .
Step 2 :Go to group create enhancement and click on classic badi radio button
Step 3 :Enter badi name MB_MIGO_BADI and click on button create.
Step 4: In the pop up screen give you Implementation Name
Step 5:Enter the short text
Step 6:Go to interface tab
Step 7:Click on PBO_DETAIL method of interface .it will ask you to create the enhancement implementation
Step 8:Click on create button and enter Enhancement Implementation ,group etc in pop up screen appeared and ok.
Step 9:Now select your Enhancement Implementation just created in step 8.
Step 10:Go to PBO_DETAIL method
Step 11:And write the following code
METHOD if_ex_mb_migo_badi~pbo_detail.
DATA :gf_class_id TYPE migo_class_id,
g_no_input TYPE xfeld,
g_line_id TYPE goitem-global_counter,
g_ext_data TYPE ty_t_extdata.
gf_class_id = 'MIGO_BADI_IMPLEMENTATION_CIN'.
e_cprog = 'Z_MIGO_ENHANCEMENTS1'.
e_dynnr = '0100'.
e_heading = 'MIGO ENHANCEMENT'.
g_line_id = i_line_id.
ENDMETHOD.
Step 12: Under PAI method declare the field to ‘X’.
Code look Like:- method IF_EX_MB_MIGO_BADI~PAI_DETAIL.
E_FORCE_CHANGE = 'X'.
endmethod.
Step 13: Under the line modify method declare a flag and set to ‘X’ checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Code look like:- METHOD if_ex_mb_migo_badi~line_modify.
DATA flag(1) TYPE c.
IF cs_goitem-mblnr IS INITIAL.
flag = 'X'.
ENDIF.
ENDMETHOD.
Step 14:Now go to se80 and make the MODULE program as mentioned in step 11 Z_VENDOR_ENHANCEMENTS1'
Step 15: Step make a sub screen 0100 as in step 11 .
Step 16: save and activate and test the migo.migo look like

Similar Messages

Additional tab item level on MIGO supresses the excise tab at item level

Hello Experts,
I have used MB_MIGO_BADI to add an additional tab at item level.It is working properly.
But now Iam facing a problem the additional tab supresses the excise tab that comes up dynamically at the item level,.
Now how do i reslove this problem.
Since excise details are entered later and the tab comes up dynamically my tab should not supress the excise tab at item level
it should come after the excise tab.
Now do I set this.
Please help . highly appreciated.
Regards,
Ranjith N

Hi Balu,
Thanks for your reply.
I dint get you what you have explained.
Hope you are clear with my problem.
I have created a subscreen 'ZMIGOITEM' with screen number '9000'.
In the PBO of BADI MB_MIGO_BADI I have displayed this subscreen.
This is getting displayed at item level when I call Tcode 'MIGO'.
After fillin up the details for performing GR..and when I check it it gives me a warning to fill in the excise details when I fill in the excise details at header level and check as per the standards an excise tab at item level should come up right ?
Since i have added a additional tab the excise tab doesn't come up....the additional tab supress it ...
Regards,
Ranjith Nambiar

Additional Tab in MIGO Item details.

Dear Experts,
My client is procuring Fuel as a stock material. the delivery of fuel is being done into tanks for which Initial & final dip readings are to be recorded.
SO is it possible to add an additional Tab in MIGO Item Level, with additional fields so that I can enter Initial & Final readings for a Fuel which is being procured as a stock material with other parameters like density, temperature, water content etc. "Does adding an Additional Tab & Fields lead to any implications in SAP? "
Thanks & Regards
Chandan H N

I think the best solution for u is to work in batch management and classification (class and characteristic)
so that u can input all the parameters like density, temperature, water content etc as per ur requirement.
i think just creating tab in migo only data entry u will be able to do and u will have to do the development.
but batch mgt and classification is std and u will be able to track the things
hope this helps

Userexit or BADI for adding additional tab in MIGO screen.

Hi all ,
Kindly tell me as to which exit or BADI is used to add additional tab in MIGO header.
Regards

Hi,
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number
Under PAI method declare the field to u2018Xu2019.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item (In this case production order number, material, u2026u2026.). For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZZGBAGS'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.

Additional Tab in MIGO

Hi All,
I implemented the BADI (MB_MIGO_BADI)i in MIGO to get the additional tab in header level.
This i have achieved through PBO_HEADER method. Now the new tab is coming but the
Excise tab is not coming. What will be the reason for that.
If any body knows he solution for this please let me know.

Hi,
Check whether the material is declare in J1ID ( Material and Chapter ID Combination as well as check whether the Vendor is maintained in Vendor Excise Details)
1. In J1ID the material chapter Id combination is maintained.
2.The cenvat determination is maintained.
3.the Vendor details and vendor status is maintained.
Also check whether the ITEM is checked OK.
Also whether the correct commercial excise invoice is given.
Regards,
Harish

How to pass error message for an additional tab strip in MIGO

Hi,
I have created one additional tab strip in MIGO transaction,In that tab i have 5 text fields,In that 4 text fields i want to make as mandatory fields,In the existing screen MIGO is using " Application log" for passing any error message It is calling as include program in SAPLMIGO report program,In that "lmigolo2 " is the include program name.Now i am struggling how to make use that in my newly created screen.
Regards
Ambili B

Hi rahul,
Can u try these
:Object failed to run due to an error while processing on the Job Server.
2 )Object failed to run due to an error
3 )Object failed to run due to an error while proc... | SCN

Adding additional tab in crm_order sales

hello experts,
kindly let me know how to add an additional tab & some custom fields to that tab
in crm_order sales using BADI.
plz do the need full..
bye--
Deepa

Hi,
Create a program with the screen type sub-screen in SE80 and design the layout for the custom fields.
Declare the custom fields in a Z**TOP include.
Under the PBO method declare the program name and screen number
Under PAI method declare the field to u2018Xu2019.
Under the line modify method declare a flag and set to u2018Xu2019 checking for material document number by which we can set the fields to be in display mode when we open MIGO for display of material document created after doing goods receipt.
Under the POST_DOCUMENT method write the code for appending the value to Z table along with the values of the line item (In this case production order number, material, u2026u2026.). For these values to be available here in this method use the memory concept u201CExport to memory idu201D in the method LINE_MODIFY.
In order to do any validations to the custom fields, go to transaction SE80 and mention the program Name created and in PROCESS ON VALUE_REQUEST create a module and provide the validations required for those custom Fields.
In order to make the fields to be in display mode during the display of material document, create a module under PBO and import the flag value and the production order number details in the method LINE_MODIFY and if that flag = u2018Xu2019, use
LOOP AT SCREEN.
IF SCREEN-NAME = 'ZZGBAGS'.
SCREEN-INPUT = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.Retrieve the values from the Z table matching the key field (production order number) and pass the value of the custom field on to the screen.

I am Not Getting a Additional Tab in ZMIGO in Display mode

Dear Gurus ,
                      I have Impelemented a Migo Badi and Created a Additional Tab in MIGO . The Additional Tab is getting Displayed in Create Mode but the same is not getting in Dispay Mode . Can Any Body help me for the same .
                                  I have Created two screen for the same .
0001 is for Created and 0002 is for Display mode . And in PBO i rave checked the condition for the same which i am pasing below for your refrence . Can any body please help me .
READ TABLE gt_scrn_active INTO ls_scrn_active
                            WITH KEY line_id = i_line_id .
CHECK ls_scrn_active-active EQ 'X'.
External subscreen:
The content of global field G_NO_INPUT (set in method MODE_SET) will
influence the number of external subsreen:
IF g_no_input IS INITIAL.
    e_cprog   = 'SAPLZCFG_JEWELLERY'.
    e_dynnr   = '0001'.                     "External fields: Input
    e_heading = 'Additional Unit'(004).
ELSE .
    e_cprog   = 'SAPLZCFG_JEWELLERY'.
    e_dynnr   = '0002'.                     "External fields: Input
    e_heading = 'Additional Unit'(004).
ENDIF .
Regards
S.B.Shankar

hi,
just i basice ? have you checked the status of BADI is it implemented.
Atul

Additional tab at header level in ME21N through BADI ME_GUI_PO_CUST

Hi,
I want to have additional tab at header level in ME21n through BADI ME_GUI_PO_CUST. But after all effort I am not getting display of tab. Let me explain what i did till now
1. Appended table EKKO with field
2. Create one function Group -under that
A. Created one Include u2013Paste the code given
DATA: call_subscreen   TYPE sy-dynnr,
      call_prog        TYPE sy-repid,
      call_view        TYPE REF TO cl_screen_view_mm,
      call_view_stack TYPE REF TO cl_screen_view_mm OCCURS 0,
      global_framework TYPE REF TO cl_framework_mm,
      global_help_view TYPE REF TO cl_screen_view_mm,
      global_help_prog TYPE sy-repid.
FORM SET_SUBSCREEN_AND_PROG *
--> DYNNR *
--> PROG *
--> VIEW *
--> TO *
--> CL_SCREEN_VIEW_MM *
FORM set_subscreen_and_prog USING dynnr TYPE sy-dynnr
prog TYPE sy-repid
view TYPE REF TO cl_screen_view_mm.
call_subscreen = dynnr.
call_prog = prog.
call_view = view.
ENDFORM. "set_subscreen_and_prog
B. Created one screen (9000)
3. Implemented BADI ME_GUI_PO_CUST and paste the code.
data: ls_subscribe like line of re_subscribers.
CHECK im_application = 'PO'.
CHECK im_element = 'HEADER'.
CLEAR re_subscribers[].
ls_subscribe-name = ' ZMMSCR1'.
ls_subscribe-dynpro = '9000'.
ls_subscribe-program = ' ZMMSCR1'.
ls_subscribe-struct_name = 'EKKO'.
ls_subscribe-label = text-001..
ls_subscribe-position = 15.
ls_subscribe-height = 7.
append ls_subscribe to re_subscribers.
Please help me what s going wrong .and what else I will do to get success.
Edited by: Vishal A Vijaywargia on Jul 29, 2009 2:24 AM

Hi Prosengit,
I am not aure about u r BADI,
BUt last week i have custom tab in the PO header data using this enahncement 'MM06E005'.
IN thi senhancement u have thrre screen exits.In this enhancement
SAPMM06E        0111 CUSTSCR1 SAPLXM06        0111 Subscreen: PO item
u can add subscreen and u can add u r own fields here .
and u can write u r code in 'EXIT_SAPMM06E_006'.
if u want to change the title of the program.
Go to program SAPLXM06 then go to text element give text symbol no as '111' and u can change the title of u r tab.
I hope this solves u r problem.

When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded.

When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded. I tried everything from reseting Firefox ,completely new installation of firefox to about.config and nothing worked it's been two days now since the problem started and i am pretty frustrated and desperate as i try to fix the issue so please help me with some solutions????
Big thanks in advance

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved

Adding field in Additional Tab page in CRMD_order

hi all,
i want to add a field in the additional tab page in crmd_order Tcode,
i did it by modifing the screen the strucutures are filled ex CRMT_SALES_BADI,
CRMT_SALES_COM
in the CRMC_MAP Tcode i have seen the field is added .
wat are the further steps do i need to do to get saved and poped in the field value when reterive.
regards

As standard the field is set to 1 decimal place.
You cannot change this value without modifying your system (not recommended)
I think you can enter more decimal places in the confirmation documents e.g. IW41
PeteA

Modify Sales order Item additional tab B

I need to modify Sales order item additional tab B ...by removing the exisitng fields and should add some new fields ....which is ok. But does it have any impact becoz the same screen fields coulbe used in any of the other transaction .......i just wanted to know if we remove the fields from sale orde item additional tab B and some new details will have some impact

Hi,
Before making any modifications check "Where-used". If it is in some other program other than the VA01/02/03, then better consult your lead before modifying.
If you do not find, go ahead and make the changes confidently.
Regards,
Subramanian

Custom fields to Additional tab B in VA01/VA02

Hi ,
We have requirement where we need to add custom fields to the Additional tab B at item level in VA01 t-code.
My doubt is to do this do we need access key? is it not possible with out access key i mean any other way to do so.
If we add those fields in VBAP table will that automatically available in t-code, hope no............
Please let me know the process to add the custom fields ..........
Regards,
Madhavi

Hi
See these notes
SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B'
SAP Note 209278 - Display of customer-specific fields in sales doc
SAP Note 386694 - Additional data not displayed in screen 8459 and 8309
SAP Note 420546 - Additional data B and transaction variants in sales order
and related notes.
And yes, you need to register it in SCCR.
I hope this helps you
Regards
Eduardo

Need to modify Sales order Item additional tab B

Hello all,
I need to modify Sales order item additional tab B ...by removing the exisitng fields and should add some new fields ....does it have any impact on this screen could be used in any of the other transaction .......i just wanted if we remove the fields and some new details will have some impact
Regards,
KK

Additional data B is used to add your own fields also known as custom fields in sales order.
Custom fields can be added to tables VBAK & VBAP (depending on header or item). Similarly you can remove fields if you don't require it anymore.
In short, your requirement can be met but you have to take help of ABAP consultant since it requires maintenance of user exits and modification of screens.

Additional Tab B in Sale Order VA01, Va02, VA03

Hi
I want to add some new fields in the (ADDITIONAL TAB B) Header.
The screen no is SAPMV45A-8309.
Now if i want to add the the field do i need to take key and do it.
If not then how can i add the new 'Z' fields in the this screen.

U can do it using Tcode: SHD0.
Pl. Search for similar threads

Additional tab to add in MIGO

Similar Messages

Maybe you are looking for