Additional validation for the Start investigation in investigation tab

Hi all ,
In health safety->overview -> incidents .
I want to add additional validation for the start investigation based on the custom field values .
so that the values in the custom field are not entered it should not allow the user to proceed for the investigation .
In this case i have displayed an error message and return statement In needs_confirmation_method  method but still unable to stop the process . Please suggest any other method .
Thanks ,
Venkat Ratnam Naidu

You can use these solutions:
1) use the fields control (CMOD), insert a new rule that if the field is empty action is disabled.
2) insert a custom validation before the action
3) modify feederclass to on/off the action

Similar Messages

  • Additional validation for one of the fields in down payment request

    Hi All ,
      I have a requirement for doing some additional validation for one of the fields in down payment request
    (F-47) .
    I need to validate a field u2018Assignmentu2019 in the down payment request .
    Here, assignment field is mandatory and user has to enter a valid contract number. Then we have to  validate the contract number entered against the tracking number field (BEDNR) in EKPO table corresponding to the vendor.
    If the contract number entered is incorrect, then system displays a message with the valid contract number. The user can modify the assignment field with this contract number. Once the field is modified, system once again validates whether the contract number entered is valid.
    Can you please provide me your valuable inputs how to achieve this.
    Regards,
    Tripti.

    Hi Vishal ,
      Thanks for your reply. I tried searching for  them but couldn't find any.
    Regards,
    Tripti.

  • Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hello! Tried unsuccessfully to restore my MBP, running the Mac OSX Lion, to factory settings. I keep getting the "can't download additional components for the Mac OSX Lion" error when reinstalling the OSX Lion. Any tips on how to resolve this problem?

    Hi
    Given that your answer to 1. is 'pre-installed' and 3. is 'No', I think the only thing to do is to take it to an Apple store (ideally the one you bought it from) and have them reinstall it for you.
    The intended solution in cases like yours is that you should be able to reboot and install even a wiped disk by using Apple's servers over the internet (you do this by restarting with 'command-r' and choosing 'reinstall Lion'). However if this isn't working for you then you need to get the store to do it. Don't let them fob you off with 'go home and try again'. Have them do it in the shop (you're still covered by Applecare warranty so it should cost you nothing save the inconvenience of the trip and possibly leaving the machine there while they fix it).
    A reinstall should leave all your own personal data and programs in place.
    Note for future: when you get it fixed, first thing to do is buy a cheap external drive and start keeping a backup (either Time Machine or clone with Carbon Copy Cloner).
    Message was edited by: softwater

  • Position 1000001 not available for the start date of the infotype record

    Dear Experts/Gurus,
    I am getting the following error message "Position 1000001 not available for the start date of the infotype record" while trying to upload employees HR Master data in PA40.
    I know the reason why because the position is created on 01.05.2009 & employee DOJ is 01.02.2006 both are mismatch & the position date has to be changed earlier date than DOJ but i don't know how to do.
    Please let me know how to sort out this issue asap.
    Rgds,
    Vikrant

    Dear Friend,
    Use  PP02, select the position no, select infotype 1000 (Object), select planning status & validity(date) and then use the copy function to change the start date.
    Regards,
    Aks

  • When trying to update my Apps I am being advised my account is not valid for the UK, I must switch to the Ireland store. How do I do this?

    When trying to update or purchase Apps I am being advised my account is not valid for the UK Store and I must switch to the IReland store. How do I do this?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • ITunes / AppStore problem: I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    I live in Colombia, my apple ID and iTunes account are set in Colombia, but each time I try to register my Colombian credit card it tells me my credit card is not valid for the store. How can I fix this?

    credit card it tells me my credit card is not valid for the store.
    Hi Don ...
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    The iTunes and Mac App Store are one in the same.
    And check out this support article here   >  iTunes Store: My credit card's security code or zip code does not match my bank's records

  • HT1311 I have done all of the above but when I try to update my Apps it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

    I have done all of the above but when I try to update my Apps on my iphone it still says that my ID is not valid for the US store and I must switch to the UK? My settings already say I am with the UK? What do I do?

    ok well like lllaass said, most apps require 4.3 or later iOS software. chances are since the apps worked before, the apps themselves got updated and will no longer work with your software version.

  • How to Disable client side validation for the message text input

    Hi,
    I have scenario where i need to by pass the client side validation for a message text input
    Scenario is
    I have a message text input field(say XYZ), i set the max length for the item as 20
    Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
    But when i try to submit the form ..my client side validation is firing..
    The Error says the XYZ is too long
    The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
    I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
    Please help me in this regard.
    Regards
    Sandeep.

    Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
    Correct me if im wrong

  • How to create a validation for the project coding mask

    Hi,
    Would just like to ask how to create a validation for the project coding mask wherein the WBS elements hierarchy will be checked against the template saved. For example,
    project coding mask is XXXX-XXXXX-XX-X-X-X-00-X
    mother WBS should be XXXX-XXXXX-X and lower level WBS would be XXXX-XXXXX-XX.
    The validation should not allow a mother WBS to be XXXX-XXXXX-XX.
    How can we go about this?

    Hi Jacquiline Bersamin,
    You can use validation with the combination of the level and the coding mask.
    In the validation:
    Pre requisite: WBS level = 1
    Validation: Prps-posid = prps-posid :1-12:
    Message : Error
    If required you can give the parameters for your detail error message.
    Please let me know if this does not work.
    Thanks
    Regards
    Srinivasan Desingh

  • XML Parser Message: Element series is not valid for the content model

    Hello,
    I work with FrameMaker 8 and DITA.
    I change the element prodinfo in the topic.edd from:
    General rule: (prodname), (vrmlist), (brand | series | platform | prognum | featnum | component)*
    to:
    General rule: (brand | series | platform | component)*
    When I import the element definition to the template everything is okay.
    When I insert the elements metadata, prodinfo, brand, series, platform and component into a topic I get the XML Parser Message that the element brand is not valid for the content model (prodname,vrmlist, ((brand|series|platform|prognum|featnum|component))*).
    When I delete the element brand in the topic I get the XML Parser Message that the element series is not valid for the content model (prodname,vrmlist, ((brand|series|platform|prognum|featnum|component))*).
    I change the element prodinfo in the topic.edd to:
    General rule: (brand)?, (series)?, (platform)?, (component)?
    ...and get the same Parser Message.
    I do not understand that. Is not it allowed to change the EDD this way without changing the DTD?
    With kind regards
    Nina

    Hi Nina...<br /><br />In general, the EDD and DTD need to sync up. You can remove elements from an EDD element definition's general rule, as long as the resulting elements are still valid to the DTD. But if changing a general rule creates an invalid structure, you'll need to also change the DTD to allow the revised structure.<br /><br />With DITA, it is common to remove inline elements from block-level elements. For example, you might want to remove the <msgblock>, <msgnum>, and <msgph> elements from the general rule of the <p> element .. this can be done easily in the EDD and the resulting structure remains valid with the DTD.<br /><br />However, what you're doing leaves the <brand> element as a child of <prodinfo> .. which is invalid. You'll get these errors when saving a file, since this is when the file is validated against the DTD.<br /><br />I do not recommend modifying the structure in such a way that requires you to modify the DTD. If you really need to do this, then you should consider making a specialization to support your revised model.<br /><br />I hope this helps.<br /><br />Cheers and Happy New Year!<br /><br />...scott

  • FPM: Tooltip for the start button

    Hi FPM experts,
    I have one question/requirement concerning the start button within the FPM GAFfloorplan. I would like to add a tooltip to that button. I know that this button is part of the FPM and can not be influenced during design time.
    Nevertheless I hoped to be able to influence the button during runtime, namely by using the interface  IF_FPM_CNR_GAF and the method DEFINE_BUTTON. According to the Developers Guide for FPM Release 701 this should work for standard buttons. However I did not succeed in using this method.
    When taking a closer look at the signature I also became aware that there is one parameter missing in the signature of the interface that is described within the Developers Guide (IV_SCREEN): To the best of my knowledge this parameter is not available in 7.01/7.1 systems.
    Any help on that topic is appreciated!
    Thanks
    Christian

    Hi,
    Is this your previous thread?
    http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/how-to-display-tooltip-for-the-start-menu-items/c93e5457-0ac6-4bbd-8a54-ffacbeadf34f
    I have checked with some Windows 7 machines in workgroup, and they are all no infotips from the start menu items, this might by design.
    Besides, please take a look at the below links:
    Start Menu
    Best regards
    Michael
    Michael Shao
    TechNet Community Support

  • Every time I've tried to download application always showing that my account not valid for the uk store.You have to switch to the emirate store.How to do it?

    Every time I've tried to download application always showing that my account not valid for the uk store.You have to switch to the emirate store.How to do it?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you will be located.
    8. Tap "Done".

  • Error in CNS0 :Sales unit is not valid for the item

    Dear Team ,
    we are using assembly process ,after creation of project from sales order ,requirments are pass to production planning (PP), Asign the bom to activites then we are going to delivery through project (cns0) at the time system shows error" sales unit is not valid for the item" we check the options in material master .please  help me on this issue.
    Thanks &Regards
    R.B.RAO

    Have a look at the following note:-
    Note 140551 - VL384 Stock transport order and batch selection
    G. Lakshmipathi

  • HT1725 Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions.

    Why does the download start again for the start. I only hve access to a 3G wifi connection so one tv episode had cost me about $10 I'm download costs because of several interruptions. Is there a way to change that?

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Channel or repeated capability name specified is not valid for the instrument

    I am using the two SCXI-1193 rf switch configured as a Quad 8x1 Mux and I'm using NISE v2.0.1.  I have created a hardwire that connects from ch0 of rfSwitch_1 to com0 of rfSwitch_2.  So, for example, when I go to create a route from rfSwitch_1 com0 to ch3 of rfSwitch_2, I get the following error:
    "Channel or repeated capability name specified is not valid for the instrument."
    Why am I getting this error message.  It seems to me that since there is a hardwire created between the two rfSwitches there shouldn't be any problems connecting a path from rfSwitch1 to rfSwitch2 between the two quad mux's.
    I am using the two SCXI-1193 rf switch configured as a Quad 8x1 Mux and I'm using NISE v2.0.1.  I have created a hardwire that connects from ch0 of rfSwitch_1 to com0 of rfSwitch_2.  So, for example, when I go to create a route from rfSwitch_1 com0 to ch3 of rfSwitch_2, I get the following error:
    "Channel or repeated capability name specified is not valid for the instrument."
    Why am I getting this error message.  It seems to me that since there is a hardwire created between the two rfSwitches there shouldn't be any problems connecting a path from rfSwitch1 to rfSwitch2 between the two quad mux's.

    I am convinced that the IVI configuration is corrupted which prevent you from using the SCXI-1193. If you do not have any hardware you would have had to simulate both SCXI-1193. The fact that you are seing all the channels in NICE virtual device but are getting error when trying to use them tells me that somthing changed in the IV configuration and that you are not using the initial topology used to read all the available channels for the 1193.  
    If you do not have any hardware connected to your computer then you need to follow the procedure below to ensure that the SCXI-1193 will work as expected.
    First create (2) SCXI-1193 simulated in MAX:
    1) Right-click Devices and Interfaces and select Create New.
    2) A dialog box prompts you to select a device to add. Select NI-DAQmx Simulated Device and click Finish.
    3) In the Choose Device dialog box, select Switch>>NI PCI-4021 (the switch controller is not important but you need one to be able to si mulate a chassis).
    4) Create a SCXI-1000 Simulated device using the step 1) to 3)
    5) Select the device created in 3) as the communicator
    6) When the chassi dialog appear, select SCXI-1193 in slot 3 and 4
    7) In the chassis Tab select 3: SCXI-1193 as the Communicating SCXI Module Slot. By default the SCXI-1193 are configured as Quad 8x1
    Now you can create a NISE virtual device just like if you had (2)  SCXI-1193 connected to your computer. Note that logical names and driver sessions have been created for both SCXI-1193 (need to close MAX and reopen) with correct entries. If you follow this procedure you will not encounter any more issue working with simulated hardware.
    Guy Ferraro
    Switch Product Support Engineer
    NI - USA

Maybe you are looking for

  • Error importing text file into SQL Server when last column is null

    Hello all. Happy holidays! I'm trying to import a text file into a SQL Server table, and I get the error below when it gets to a row (row 264) that has null in the last column. I'm guessing the null jumbles up the delimiters somehow. The nulls are no

  • Brush size visualization

    Hi all, I don't know if this is new in CC or if there is a setting somewhere ( I am coming from cs3 to cc). How would one get the colored (red) brush sizing when alt-right clicking to change the brush size? Mine just shows the black ellipse outline,

  • Logging on to Facebook

    All of a sudden (have had my new iMac since December) I keep getting this alert when I try to log on to FB more than once or switch back and forth between accounts: Too many redirects occurred trying to open "http://www.facebook.com/". This might occ

  • Blue Print

    Hello Experts, Appreciate if some one helps me with a detailed documentation for configuring US Tax procedure.. (both with / without jurisdiction) Thanks

  • Expanding/Shrinking film rolls

    I'm working on backing up my iPhoto Library. I'm wanting to select groups of film rolls until the disk is shown to be full. I have 12,000 photos at present and all the film rolls are currently expanded. I've been going along and clicking on the down