How to Disable client side validation for the message text input

Hi,
I have scenario where i need to by pass the client side validation for a message text input
Scenario is
I have a message text input field(say XYZ), i set the max length for the item as 20
Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
But when i try to submit the form ..my client side validation is firing..
The Error says the XYZ is too long
The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
Please help me in this regard.
Regards
Sandeep.

Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
Correct me if im wrong

Similar Messages

How to get client side validation for double range and double field in stru

Hi,
I have achieved client side validation by using <html:javascript formName=""/>
All fields shows client side validation but double field and double range field is not shows client side validation but shows server side validation.
I am using Liferay jboss server.
Please tell me a way to achieve client side validation for double field and double range.
Thanks & Regards,
Brijesh Baser

I see in the query component there is a QueryListener and a QueryOperationListener. Have you tried letting Jdeveloper create methods for these in some backing bean, and putting in some debug code to see when these methods run? I would think one of them could very well be used to validate the input, somehow; if the input were bad you could just raise an exception and pass your error message, I bet.
If not...
I am pretty sure that there is an appendix in the Fusion Developer's Guide for Forms developers turned to Java...you might look at what it says for post query. I know in the 10.1.3.0 equivalent documentation, they gave reference to a method in the ViewObject which fired for each record after a query was run. You could definitely intercept this query return from there. In fact doing something like this may be something like what Frank N. was intending when he mentioned ViewObjects "validation". Not sure though. I am still learning what new features there are in 11g adf/bc.
Good luck.

How U Perform Client Side Validations In Webdynpro?

Hi experts,
explain me abt How U Perform Client Side Validations In Webdynpro?
Thanks in advance
Sreenivas

Hi ,
As the javascripts used for client side validations are not supported in Webdynpro, All the validation written in a code take a complete cycle at runtime.
You need to write the validations in the corresponding eventhandler i.e. action.
Regards
Deepak

How to make client side validations using NWDS

Hi Frndz..
Am creating UIs using NWDS ,i made tthe validations @ servr side n i have 2 made this validations @ clinet side ,but am not aware how it is????
can anyone help me in this regard.
THANKS & REGARDS
Rajesh Kumar

chk it
/people/martin.kellermann2/blog/2006/12/17/client-side-input-validation-with-htmlb--the-basics
http://help.sap.com/saphelp_nw04/helpdata/en/43/067941a51a1a09e10000000a155106/frameset.htm
/people/kirupanand.venkatapathi2/blog/2005/12/18/client-side-validation-in-dynpage
http://help.sap.com/saphelp_nw04s/helpdata/en/8e/e3a942ad920c31e10000000a1550b0/frameset.htm
/thread/86123 [original link is broken]
https://media.sdn.sap.com/html/submitted_docs/dotnet/Programming%20with%20PDK%20for%20.NET/SAP%20NetWeaver%20.NET%20Controls/Event%20Handling/Client%20Side%20Event%20Handling.htm

How to set client side validations in ADF Forms

check for client side validations on submission of a form and display custom error messages.

Hi,
you really should take more time in phrasing out a question. I have no clue of what you are actually asking for. Note that ADF Faces performs client side validation e.g. for required fields. Just in case this was the question
Frank

How to display a Column Header for the characteristic Text column

Hi All
Our users want me to provide for a column header for the characteristic text.
Here is what I mean
I am reporting 0plant in the rows as key and Text. In the column on Plant Key the column header says Plant but there is no column header for the plant text.
Eq:
Plant                                                        Amount
IE00         Initiator Plant                               244
IE01         Initiator Plant NJ                          890
Our users in the plant text column want a dummy column header to be displayed. SInce they download the data from the BW report to Excel and use pivot reporting. How can I introduce a column header for the texts.
Thanks
Karen

Hi Karen,
I am not sure if this is possible, although Users can ask anything :).
In Planning we used to predefine cell headings via Macros and creating dummy cells in between. I am not sure if a similar scenario can work here.
By default this is not possible in Reports. In BEx workbooks, you could probably try with Macros.
Another easy option is to bring the data in the Cube as another field or create a nav. attribute in the master for text and use it as a nav. attr. in the Cube and put it in your Query row alongside.
-Aby

HT204053 how can i change my account for the messages app o my mac? I have my school email and I do not know how that got there i just want to use my apple or iCloud account.

im having trouble changing my account for the messages app on my mac. im not a mac wiz

From the menu bar, select
Messages ▹ Preferences ▹ Accounts
Sign out of the account. Add another one and sign in.

How to disable internal TNEF format for mail message?

for exchange 2007/2010
my configuration is as follows:
1. i've added a RoutingAgent, that catches every message that its subject contains
a specific word, then - re-routes it into a dummy domain (dummy.com for example).
2. i've added SendConnector that catches dummy.com in the address space, and
routes it to a smtp listener.
If i send mails from outlook client to another user in the domain, it seems
that outlook wraps the smtp request in TNEF format (where the body and attachments are replaced with winmail.dat file).
If i add a recipient which is outside of the exchange domain, the smtp request is sent well in a regular MIME format.
can i somehow change the internal handling to simple MIME format? i need to
relay it to an external IP...
i tried to disable it in "Remote transport" - didnt work, because i'm routing
those internal mails.
thanks!

Hi,
Please refer the following post about how to disable TNEF in exchange 2010 server:
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/8cb63cda-26df-42c8-8e85-e30fb7a5d41a
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Client side validations in web dynpro

Hi experts,
can anybody tell me How we perform client side validations in web dynpro ?
Thanks,
Prasad.

Hi Prasad,
Validations are generally required during some events or calls to a functions. So there are bascially two ways:
1) You do the validation is the onActionEvent of the UI element. However this is some time time is not a right approach (depends upon your scenario).
2) There is another method called wdDoBeforeAction(). Do all you validations for the actions in this method. read the java doc for the same functions, here:
   * Hook method called for additional validation of user input. <p>
   * @param validation Interface for reporting validation errors
You can catch the particualr action in this emthod and then can write you validation code before the action is called.
For gettiong the action use this code:
if(validation.getCurrentAction().equals(IPrivate<Your_View_Name>.WDActionEventHandler.<ACTION_NAME>)){
// write your validation code here.
I hope this will help you. Please revert back in case you have further issues.
Thanks and Regards,
Pravesh

Client side validations

HI,
How to perform client side validations?

Hi
Its an ADF BC Application.This Screen is used for both Creation and Updations.
I am having a Text Field(internally AJAX Completion field for auto suggest).
I want to perform client side validation for it. i.e., If the user is creating a new record it should not be empty.
First thing I have tried is making the propery 'required' to true. but this created a problem, because if the user is not creating any new record, but just modifying the existing records, then also I get the error message, which actualy should not trigger at all.
Secondly , I tried to use Validators using method validations.but did not succeed in it. Because , I am not getting how to keep validations for AJax text field( completionField)
please help.

Client-side validation

Hello,
I am trying to do client-side validation using the JSF.
I would like to know if it is possible, if JSF furnishes some help to do it...
If someone have some examples, it would be a great help.
Thanks,
Marie.

Thank you very much for the link.
I read the document but it did not completely solve my problem. Indeed, all the examples are about a client-side validation at the submit phase. And I am trying to do a client-side validation on the focus lost of each field.
I know that I can do it by adding the attribute focusLost on the field and by adding the javascript corresponding to the validation of this field. But I would to make this validation automatic, and for that, I suppose that I need to make generate the javascript by a component. This step gives me some problems.
Is it possible for a UIComponent to generate Javascript code that will be written at the end of the component?
Thanks for your help
Marie.

How can I change the disabled of a message text input base on a choice

how can I change the disabled of a message text input when a dropdown list value is changed? I declare the primaryclientaction but I don't know how to make the event automatically change the disabled of the message text input to true or false.
HELP!!!! IT'S URGENT....

Hi,
assuming you are using ADF Faces:
Put a submit(); in the on-change javascript event of the dropdown.
In the disabled property of the input text use some EL to reference the value of the dropdown eg disabled="{#{! bindings.Fruit.inputValue == 'BANANA'}"
Brenden

How to add new validation for the iProcurement web page?

Hi,
I am very new to OA Framework. Can you experts give me some guidance on how to proceed with the following customization?
My requirement is in iprocurement when you open a new cart and check out on "ICX_POR_SHOPPING_CART" there is a Project Field and reference to Charge account. If the users go to charge account (ICX_POR_CHECKOUT_SUMMARY) and enter the segment values ( which includes project segment) and enters a value in project segment other than '000000' with out entering the Project Field on "ICX_POR_SHOPPING_CART" the page should give error.
Please give me some suggestions on how to proceed.
Thanks
Vish

I need the client side validation. By saying server side validation if you mean writing a triger on tables to validate then I am thinking to take that option as last resort.
Can you please tell me what is PPR ( Is it personalization?) stands for.? In my case the Charge Account is DFF.
Can you direct me to any documentation on how to add custom javascript to achieve my objective?.
Thanks for your Help.
Regards

How to 'client-side include for secondary menu on page'

Hi there.
The following page refers:
test page for early
draft
The linked page is in fact a DW CS3 tmp preview file, for
that reason the CSS has been pulled into the html file by DW, it
won't look that way in the eventual page file.
After lengthy battles with the Spry Horizontal menu, I
eventually resorted to Pop Menu Magic 2 (PPM2) to generate menus.
I'm very happy with the product (I'm not looking for PPM2 support,
but rather support pertaining to CSS-driven menu's in general
relating to caching). I started out with a single main navigation
menu, which was very comprehensive - but also very big (ito file
size). I was hoping to cache a part of the menu on the client-side
to reduce download times once the site visitor has downloaded the
first page in the site (where he enters the site is not
applicable). But that proved impossible (I think...).
I then followed some advice to break up my main navigation
menu, keep only the more important stuff in there and rather
distribute the lower levels of the main menu into their own
dedicated menus. From there the page linked above.
The main menu at the top is fine, no problem there. On the
left below the masthead I've created two menus, one above the other
(it displays as a single menu but the first menu ends above the
"Other tour lists" item). The first of these two menus contains the
bulk of the heavy navigation elements (±160kb of the total
page file size of 220kb). The div info that applies to this menu =
<div id="p7PMM_2" class="p7PMMv06">. I'd love to cache this
menu, either in full or the bulk thereof, on the client-side. That
is implement a client-side include. When a visitor first enters our
site the include file with the 160kb (secondary) menu gets
downloaded together with CSS stylesheets, etc. When the visitor
links through to a following page in our site, his machine
(client-side) dishes up the menu to that next page without having
to download it from our hosting server a second time.
Is this possible and how? Any and all suggestions will be
appreciated!
Our clients are mostly wealthy and thus probably (virtually)
all have high-speed broadband connections. I seriously doubt that
any of them are running dial-up connections. Thus this issue is not
going to sink our site. But I'd love to cut page file size if
possible.
Furthermore, I'm not too worried about the small portion of
visitors that may have their javascript disabled in their browsers.
The main navigation menu at the top of the page will still allow
them to navigate the site. Much the same goes for SEO.
I've tried one or two CSI javascripts and succeeded in
actually getting the relevant tags and contents inserted in the
html document, but the javascript would then 'break'. That is all
the coding and menu contents would be there, but the javascript
won't function (menu's won't pop / fly-out). I'm a little clueless
when it comes to Javascript, and many other things :-), but I
suspect that the Javascript in the include file does not get
called. If the Javascript is kept in the html file, the menu
content (elements) in the include file arrives in the html file
after the relevant script has been called and doesn't get
rendered??
Once again any help / suggestions will be appreciated!

> But that proved impossible (I
> think...).
Even without doing anything on your part, the images, the
CSS, and the
javascript is already cached client-side. You cannot cache
any of the
structural code client-side.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"afrilux" <[email protected]> wrote in
message
news:[email protected]...
> Hi there.
>
> The following page refers:
http://www.afrilux.co.za/test/1/dev2.htm
>
> The linked page is in fact a DW CS3 tmp preview file,
for that reason the
> CSS
> has been pulled into the html file by DW, it won't look
that way in the
> eventual page file.
>
> After lengthy battles with the Spry Horizontal menu, I
eventually resorted
> to
> Pop Menu Magic 2 (PPM2) to generate menus. I'm very
happy with the product
> (I'm
> not looking for PPM2 support, but rather support
pertaining to CSS-driven
> menu's in general relating to caching). I started out
with a single main
> navigation menu, which was very comprehensive - but also
very big (ito
> file
> size). I was hoping to cache a part of the menu on the
client-side to
> reduce
> download times once the site visitor has downloaded the
first page in the
> site
> (where he enters the site is not applicable). But that
proved impossible
> (I
> think...).
>
> I then followed some advice to break up my main
navigation menu, keep only
> the
> more important stuff in there and rather distribute the
lower levels of
> the
> main menu into their own dedicated menus. From there the
page linked
> above.
>
> The main menu at the top is fine, no problem there. On
the left below the
> masthead I've created two menus, one above the other (it
displays as a
> single
> menu but the first menu ends above the "Other tour
lists" item). The first
> of
> these two menus contains the bulk of the heavy
navigation elements (?160kb
> of
> the total page file size of 220kb). The div info that
applies to this menu
> =
> <div id="p7PMM_2" class="p7PMMv06">. I'd love to
cache this menu, either
> in
> full or the bulk thereof, on the client-side. That is
implement a
> client-side
> include. When a visitor first enters our site the
include file with the
> 160kb
> (secondary) menu gets downloaded together with CSS
stylesheets, etc. When
> the
> visitor links through to a following page in our site,
his machine
> (client-side) dishes up the menu to that next page
without having to
> download
> it from our hosting server a second time.
>
> Is this possible and how? Any and all suggestions will
be appreciated!
>
> Our clients are mostly wealthy and thus probably
(virtually) all have
> high-speed broadband connections. I seriously doubt that
any of them are
> running dial-up connections. Thus this issue is not
going to sink our
> site. But
> I'd love to cut page file size if possible.
>
> Furthermore, I'm not too worried about the small portion
of visitors that
> may
> have their javascript disabled in their browsers. The
main navigation menu
> at
> the top of the page will still allow them to navigate
the site. Much the
> same
> goes for SEO.
>
> I've tried one or two CSI javascripts and succeeded in
actually getting
> the
> relevant tags and contents inserted in the html
document, but the
> javascript
> would then 'break'. That is all the coding and menu
contents would be
> there,
> but the javascript won't function (menu's won't pop /
fly-out). I'm a
> little
> clueless when it comes to Javascript, and many other
things :-), but I
> suspect
> that the Javascript in the include file does not get
called. If the
> Javascript
> is kept in the html file, the menu content (elements) in
the include file
> arrives in the html file after the relevant script has
been called and
> doesn't
> get rendered??
>
> Once again any help / suggestions will be appreciated!
>
>

ADF validator or JavaScript for client side validation ?

using JDev and ADF 11g
Problem description : To apply validations such as date range check, pattern matching, maxlength etc.. on ADF Faces Components.
Solution 1: Use ADF validator such as Reg Expr validator, Max Length validator
Souliton 2: Write Javascript code for validating the component's value at cleint side.
When using ADF Validator for such type of validation checking, a request is send to the server for processing (additional overhead) . However we can do such validations with javaScript functions without the need to interact with the server. So, what benefit does ADF Validator serves when one needs to implement such validations ?
Please share your views...

H,
afaik, client side validation in ADF Faces suppresses server round trips if a validation error is detected on the client. Only if no problem is found, the server side validation is challenged upon submit (so no extra round trip for validation). Shay is absolutely correct. JavaScript is a convenience but never a solution.
Here's how to create a custom validator with a client and server side implementation : http://download.oracle.com/docs/cd/E15523_01/web.1111/b31973/af_validate.htm#BABEIIDD
Frank

How to Disable client side validation for the message text input

Similar Messages

Maybe you are looking for