Additional

Hi All,
Could I use print layout designer to generate report return in sales credit memo screen ? Actually we use a button (SDK addon) to print the report. Pls give advice. Tks
Rajh

the user want that return document can be printed although the user is being in the credit memo screen. Is it possible using PLD ? Or I need to make SDK custom ? Tks
Rajh

Similar Messages

  • Can't view data in IT302 - Additional Actions

    Hi Gurus,
    I cannot view any data in IT302 using Ad Hoc Query.
    Correct infoset was set up which include Additional actions infotype.
    IT302 was also properly set up in t77S0> ADMIN-EVSUP set to 1.
    And in T529A all Actions set to be updated in IT302.
    There are also Additional Action entries in table PA0302 but when I search it in Ad Hoc Query for a personnel number the fields (Action Type, Reason) turn up blank.
    Do I still have to make other configurations?
    Any ideas?
    Kindly help.
    Points will be given out
    Thanks,
    Olekan Babatonde

    I was in the need of getting the output based on Additional actions, and was able to figure out the way as how to do it., I am writing this here not that you would still in need but some one in future might come to this thread and get away with the answer.
    1. First we need to add Infotype 0302 to our infoset (Going toSQ02, Menu bar, Edit -> Change infotype selection.
    2. Once you have the infotype under the Data fields.
    3. Try adding each individual field under the field group/data fields by right clicking on the necessary infotype field and selecting Add field to Field group.
    4. Once you got all your IT0302 fields under field group/data fields right side of the window, save your infoset and run the  infoset query.
    5. Now you have the input fields and output fields to be selected from infoset query.
    6. Select input fields as Pernr, and action start date and end date from IT0000
    7. Select output fields from 0302 infotype fields, you may select all the necessary fields in the output, but the required one is "Counter Field"
    8. Once you have your hitlist from the ad hoc query, refresh the list from bottom of the screen and picks up all the ones who have the counter field as 1 - they are the ones, who has additional actions on specific date.
    Hope it helps to the viewers.
    Warm Regards!
    -Kanuku

  • Locked out of additional internal drives... Help please

    Any help would be more then welcomed as I did something stupid and need a bit of help to fix it please.
    Had an issue today on my Mac Pro (2.8, Quad 5.1). All was running fine until I went to update a piece of 3rd party software (Fetch). After the download I went to drag new version into my apps folder and was told I didn't have permission to instal the app.
    Now to be clear, I've had a bit of an issue with this before as I'm running 2 mac pros in different locations and drag and copy files and folders from here to there on a regular basis via FTP and external drives. I also have all 4 slots filled on both systems with various drives set up for a particular function along with a number of externals. I've set permissions on both systems and all drives to "read and write" for both my accounts to have full access and each time "apply to enclosed items" was selected.
    But for some reason, from time to time, I have to authorise the file transfer. Haven't figured out the reason but it's not a huge deal so have left it.
    Today was the first time I have had access denied for my home folder when working from same system. Not thinking and while on the phone to someone (this is where I did the stupid part), I opened the info on my boot (startup) drive and decided to add both of my user accounts and change permissions for each in addition to the system, admin and everyone that was already there. This was done while working from it directly and then set options to "apply to enclosed items". Yea, smart I know.
    About 20 minutes passed and then it told me that it didn't like any of my system extensions. I was forced to do a restart and got the spinning wheel for about 30 minutes. Had to do a force quit and open in single user. Applejack wouldn't help at all, nothing. Had to then open cd drive through terminal just to get systems disk inside.
    Restarted from systems disk and tried a simple disk utility repair. System restarted fine but I noticed that I was then locked out of all of my additional internal drives, iDisk included (padlock shown on all drive icons excluding my Boot/Startup drive). Tried opening info on the various drives with apple i option and "permissions denied" popped up each time.
    I then took the step to restore from time machine. Set my restore selection to about 2 hours before I became an idiot. After it was finished I restarted the system hoping that would clear up my mistake but same thing, still locked out of all of my drives aside from boot/startup drive.
    All user accounts that I have added to the boot drive are still showing, I have yet to try and remove them... Figured I would ask for help before I messed it up any further. Spoke to apple care and they have advised me to do what I have done so far.
    Aside from an erase and instal, what steps should I take from this point? Will removing the added accounts clear up the issue?
    Also, any idea as to why I was refused permissions to begin with...?
    Thanks in advance and sorry for the book, just wanted to be as clear as possible.

    Force iPad into Recovery Mode. Follow step 1 to step 3 very closely.
    http://support.apple.com/kb/HT1808

  • Hi Guys,  I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out

    Hi Guys,
    I am using the full width video widget on a site. The widget was working perfectly however I have just added additional content to the site and re-uploaded and now the video is not working! Please help I have tried everything and am freaking out as this web-site has been payed for by my client.
    Alex

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Restriction of addition of Schedule lines to a sales order/scheduling agrmt

    Dear Gurus,
    I need to restrict addition of new schedule lines to a scheduling agreement till all the goods in the previous schedule line have been delivered.
    I tried applying a delivery block at the SL line level ( in the SL category). But to my surprise, the system allows the user to add SL lines to the scheduling agreement. after this the user is free to create deliveries even though the delivery block is still active on the SL line.
    I'll try explaining this on numbers:
    0n 30.01.2010 i created a SL line for say 100 qtys. The system automatically applies the SL block to this. This Delivery block is removed by the concerned authority.
    Now I create a delivery of say 99 QTY for this SL line. The scheduling agreemnt status is as follows:
    order qty is 100, *** rel qty is 100, open qty is 1 and confirmed qty is 100.
    Now suppose the user enters another Sl line for 100 qty's for which the delivery block is till active and not released.
    In this case the user can create delivery for upto 101 qty's. Ideally I want the system should allow the user to create a delivery for only 1 more Qty ( Delievery block for the new SL line is still not removed).
    How can we do this? Please help!
    Warm Regards
    Prashant Joshi.

    Hi,
    If u adding 100 more quantity in same schedule line then system will create delivery for 101 not for the 1
    becauze u adding qty in existing SL,
    If u want to deliver first 1 qty,then
    Add another schedule line of 100 & block it.
    Create delivery, now system will create delivery onely for qty 1, Not for 100 becauze it is blocked.
    If your Block is not working properly
    Then on initial screen of delivery creation put from to item Number as 10 in both and deliver it
    Kapil
    Edited by: Kapildev Farakte on Feb 3, 2010 5:11 PM
    Edited by: Kapildev Farakte on Feb 3, 2010 5:13 PM

  • Syndicating based on Addition of a Remote System Key

    Hi
    We have a distributed system syndication scenario where we need to syndicate a record automatically when a remote system key is added to an existing harmonized record in MDM. By adding the Remote System Key, it essentially means the remote system is 'subscribing' to the new harmonized record.
    Is there any way to fire off a syndication event when a new remote system key is added to a record? It seems that MDM currently only flags a record as ready to be syndicated when a value changes in one of the fields of that record - it doesn't seem to identify the addition of a new system key to the record as a change to the record.
    Thanks for your assistance in advance.

    Hi Ravi
    Thanks for the reply. The current view is that we were going to add it manually as a remote system key mapping, as the material record would already exist and would have been harmonized in mdm - so no need to add it through an import map. The scenario is that the master record already exists and another system wishes to also receive this record. Any thoughts on what options do we have if we go this approach?
    Also, is their anyway to indicate if a remote system key is added for a new system to an existing mdm material, to indicate when syndicating that the record being sent is a 'Create' record - and hence only to syndicate it to the new remote system added and not to the other systems which also have remote key's against that record?
    Thanks
    Costa

  • 5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America

    Step 5.
    5. We need additional time to process your transaction You should get an email from us by next business day. If you don't hear back from us, you can check your order status on your account page or call us at +1 800-585-0774. If you're not in North America, you can look up a local number here. For now, check out all the great free features of Creative Cloud! Get started with trials
    I keep getting this.
    The Bank and Paypal states that Adobe needs to process my transaction twice.
    I have no order number/ no status nor contact from Adobe. I called customer service and he transferred me to sales where the phone rang with no answer.

    Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) do I have to pre-order online or do I just have to show up at a Verizon store Sept 19th?

    If I wanted to exchange my iPhone 5 for the new iPhone 6 (no additional cost after $199 gift card from selling iPhone 5) can I pre-order online now or do I just have to show up at a Verizon store Sept 19th?

        scodaddy, that is a wonderful question. We are super excited about the new iPhone. You can always pre-order your new iPhone online and then start the mail in rebate by following this link: http://bit.ly/GGnDDC Or you can always go into the store location and do it all in store on the 19th when the phone is launched. That would depend on if the store has them in stock when you go in. I hope that this was able to address your concern.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • Error While updating info in the People Form-Additional Personla Details

    Hi All,
    Iam getting an Error While updating information in the People Form,Additional Personla Details DFF.
    Error Like:
    APP-PER-289974:There has been an error Processing this person,The error encountered is 'ORA-20001:HZ_STNC_SQL_EXCEP:N,PROC.sync_Person,N,ERROR.ORA-25153:Temporary Tablespace is empty ,N,POO,1265890',which occured in procedure  per_htrca_merge_tca_person at step10.
    Please contact your support represntative.
    Thanks -
    Sowmya

    Thanks you,
    By this Note id:395136.1
    Iam unable to find this Set profile 'HZ: Generate Events for DQM Real-Time Synchronization' to No
    with this Note id:278422.1
    We are unable to find this proifle option : HZ: Data Sharing and Security Enabled profile
    we are using applications 11i.
    please help to find this Profile option.
    But with this note id:ID 395136.1
    This is Working.
    Query for HZ: DQM Synchronization Method profile. Set the value to Disable.
    But iam facing proble while uploding data to DFF ,Error--SQL exception occurred during PL/SQL upload.
    Thanks for the Support-
    Sowmya.
    Edited by: user13419037 on Aug 11, 2011 11:53 PM
    Edited by: user13419037 on Aug 12, 2011 12:03 AM
    Edited by: user13419037 on Aug 12, 2011 3:45 AM

  • A suggestion for a new itunes addition

    Hi all,
    This may sound overly simple, but when I thought why do we all love (or use) iTunes there are 2 major reasons. And then, over time they blend into 1.
    The first is our iPods (etc) require them.
    The second reason is it keeps our media organised.
    Over time it is this latter reason that we use more.
    So I was thinking, the ability to make folders/sub folders in the TV Shows, Podcasts, Movies (etc) area would be beneficial
    If we only think about the, say TV Shows column, just for an example. Have a folder say call it simpsons, and then the sub folders could be the episodes. Now thats a heck of a lot easier then several hundred episodes dumped into one folder in addition to anything else you already have. Right?
    It should be a pretty simple addition for apple to make too.
    Thanks for listening

    You can make enhance requests directly to Apple if you like. (We're a user to user troubleshooting forum, so there's no guarantee that anyone from Apple will see your post here.)
    Here's a link through to the iTunes application product feedback form:
    http://www.apple.com/feedback/itunesapp.html

  • Impact of Addition of New Value Fields in the existing Op. Concern-COPA

    Hi All,
    Want to know the steps of adding new value fields in the existing operating concern in COPA?
    What is the overall impact of addition of New Value fields in the running Operating Concern?
    How do we test the addition of new value fields?
    Is the addition of New Value fields to the running Operating Concern advisable?
    Your support and advice is highly anticipated and appreciated.
    Thanks & Regards
    9819528669
    Ohter details are as follows...
    VALUE FIELDS : Defines the Structure of your Costs & Revenues. (Op. Concern 120 Value Fields) 
    1)     The client requires three new value fields to be created. Value fields for :
    -     Other Airport Charges - International
    -     Cargo Commission Cost
    -     Personal Cost (Direct)
    2)     What are the Steps involved in creation of new value fields? The steps are :
    1)     Before creating new value field we need to check whether we can use already existing UNUSED value fields (There are 62 value fields created for the op concern 1000, in production the value fields TBUL1-L7 i.e. to be used (I assume) screen shot1 provided. My predecessor has used value field VV291, VV292, VV380 original description being TBUL3, TBUL4, and TBUL1. I believe he has changed the description in development client and created a transport request ref screen shot 2)
    2)     You can create new value field thru T-Code KEA6 (4-5 characters beginning with VV) u2013 My predecessor has reused the value fields originally created he has not created new one I believe. please provide give your comments)
    3)     Specify whether this field is for Currency or Quantity (currency defined in attribute of op concern and quantity defined by its own field u2013 unit of measure) u2013 My predecessor has configured the three value fields as Currency.
    4)     Describe how the values in this field are aggregated over characteristics. (SUM, LAS, AVG) u2013 My predecessor has aggregated all the three value fields as SUM and they are in Active status.
    5)     After the value field is created you have to add the value field (active status only) to the operating concern by Editing the Data Structure. (I guess this is done in the next step)
    6)     Assign newly created Value fields to the Operating Concern u2013 T-Code KEA0 (In development client the value fields are assigned to the op concern 1000 refer screen shot 3. In the production client also those three value fields exist (does it mean they are assigned? your comments please.) As they have the original description TBUL3, TBUL4, and TBUL1 refer screen shot 4.
    7)     After the Data Structure is defined you need to activate them. (creates plan vs actual database) u2013 Go to the data structure tab and Choose Activate. The status in dev client is Active with correct description but in the production client it is Active with the OLD description. After addition of the value field you need to regenerate the operating concern. T-Code KEA0 u2013 right?
    8)     Condition Types are assigned to Value Fields? Donu2019t know u2013 T-Code KE45 (I think this is NOT required in our case u2013 Please give your comments)
    9)     Define and Assign Valuation Strategy u2013 Cost assigned to Value fields u2013 T-Code KE4U (I think this is also NOT required in our case)
    10)     Define PA Transfer Structure for Settlement u2013 T-Code KEI1 (This step is crucial u2013 I think I have to to include newly created value fields, but am not aware how to do it and what is the connectivity or what happens after this is done)
    Note: My predecessor has created a Transport Request No# KEDK902167 for the value fields created by him.
    3)     Whether my predecessor has performed all the steps for value field creation? How to test it and check that?
    4)     If yes then,  Do I need to perform additional configuration or can I proceed to transport it to Production?
    5)     What is COPA Allocation Structure & PA Transfer Structure? Where and Why It is used?
    6)     What are the different methods of cost and revenue allocations in SAP?
    7)     I have checked the status of the value fields across clients, It is as followsu2026
         Value Field     Value Field For     Description     Development      Quality     Production
    1     VV291     Other Airport Charges International     TBUL3     Exists      DNE     DNE
    2     VV292     Cargo Commission Cost     TBUL4     Exists      DNE     DNE
    3     VV380     Personal Cost u2013 Direct     TBUL1     Exists      DNE     DNE
    #DNE : Does Not Exist (assumed since the description given to value field is not the same as in development client.)

    HI sree,
    ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
    Thank You!
    Best Regards,
    pradheep.

  • Issue in Addition of  attribute column in VO

    Hi All,
    I have a custom VO in which dependent on custom EO which requires a extra attribute to be added. i added that attribute in both EO & VO. But changed the definition of page to add this extra field to accomdate the extra attribute, im getting below error, i have checked VOimpl and VOrowimpl both the addition of new attribute, need suggestion in this regard.
    java.lang.NullPointerException
         at oracle.jbo.server.ViewObjectImpl.getAttributeIndexOf(ViewObjectImpl.java:4166)
         at oracle.apps.fnd.framework.webui.OAMessageLovInputHelper.getMinCharsForLookAhead(OAMessageLovInputHelper.java:3944)
         at oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean.getMinCharsForLookAhead(OAMessageLovInputBean.java:1249)
         at oracle.apps.fnd.framework.webui.OAMessageLovInputHelper.addLookAheadData(OAMessageLovInputHelper.java:3206)
         at oracle.apps.fnd.framework.webui.OAMessageLovInputHelper.processRequestAfterController(OAMessageLovInputHelper.java:1106)

    Hi,
    Looks like your newly added attribute didn't take effect,
    Did you added a new column in the database?
    In EO how did you added the new attribute? using sync DB option?
    In the VO query did you added the new attribute as the last column?
    After adding the Attribute in the VO, did you checked the Attribute Mapping is showing correct mapping?
    Thanks,
    With regards,
    Kali.
    OSSi.

  • Additional Files in Sender File Adapter

    Hi
    I have to collect 2 files (IN.txt, IS.txt) and attach 2 files as an attachment to mail.
    So I opted Additional Files in Sender File Adapter
    Source Directory = D:\usr\sap\pitest\LoadTest\Output\Invoice
    File Name = IN.TXT
    Additional Files
    File List <IS.TXT>
    <IS.TXT>.namePart               ".TXT"=".TXT"
    <IS.TXT>.optional                  NO
    <IS.TXT>.type                       TXT
    But I am able to Pick only one file (IN.TXT) from the Source Directory.
    IS.TXT file is not at all picking.
    Please give me your suggestion.

    I reply just want to close this issue.
    if file Name = Item.TXT and additional file name is ItemText.csv then configuration as following.
    File List <Item.TXT>
    <IS.TXT>.namePart               ".TXT"="Text.csv"
    <IS.TXT>.optional                  NO
    <IS.TXT>.type                       TXT
    for namePart parameter, we should give the str which need to be replaced. for your example, we could give as <IS.TXT>.namePart               "IS.TXT"="IN.TXT"
    replace all the file name.

  • Additional field in adhoc query

    Hi all, I need to be able to report on the IT105 subtype 0001 system ID for employees who are withdrawn from the company, however, when someone leaves their IT105 record is delimited so adhoc query will not output anything.  Has anyone coded an additional field that will look at the latest record regardless of the date?
    If you have, please can you share the code with me!?
    Many thanks!

    Hi Tanya ,
    Please find the code below. It is designed for additional structure z105_last which is bassed on P0105 type.
    data l_it_p0105 type standard table of p0105.
    clear: l_it_p0105, z105_last.
    call function 'HR_READ_SUBTYPE'
      exporting
        tclas                 = 'A'
        pernr                 = peras-pernr
        infty                 = '0105'
        subty                 = '0001'   
        begda                 = '18000101'
        endda                 = pn-endda
      tables
        infty_tab             = l_it_p0105
      exceptions
        others                = 1.
    if sy-subrc = 0.
      describe table l_it_p0105.
      read table l_it_p0105 into z105_last index sy-tfill.
    endif.
    Regards,
    Sergey

  • To populate Segment data to Order item level in additional tab B

    Hi Experts,
    I am working on Inbound interface using IDoc (ORDERS05); during Idoc process IDOC_ORDERS_INPUT; i have to take segment value and need to populate at order items level; in custom field  (in additional tab B).
    For that i am using FM (Customer exits) :
      Step 1-  EXIT_SAPLVEDA_001 (Getting segment value and passing to XVBAP-Zfield).
      Step 2- EXIT_SAPLVEDA_002 (Passing Value to respective screen using BDCDATA table).
    Due to unable to find where i have to set flag and how ?;                                                                                To avoid multiple record to append ; BDCDATA Table with same screen.
    As mention in this link for Header level additional tab B : http://www.sapfans.com/forums/viewtopic.php?f=21&t=62945#p1025880.
    They are using my_flag to avoid ,issue as i mention in above step.
    Step 3 - At last they are deleting my_flag in FM : EXIT_SAPLVEDA_003. (find in above link)
    Thanks in Advance
    Regards
    Vinay

    you need to use a flag of type vbap-posnr .
    and your check statement will become
    check my_flag NE XVBAP-POSNR. (or the ZZXVBAP-POSNR).
    and setting the flag
    my_flag = XVBAP-POSNR.
    so for same posnr it wont repeat the append.. hope this can help

  • Can't see the ESS Additional Personal Data link within Personal Information

    Hi All,
    For some reasons, I can not see the Additional Personal Data link within the ESS Personal Information iView. I have checked the Homepage framework and the existence of the iView in the PCD and everything appears to be fine.
    Do I need to assign any additional infotype to my id or give myself specific authorisations to see this link?
    I would really appreciate if you could provide an answer to my query.
    Thanks,
    Vibhu

    Hi,
    I think mostly you have maintained the data in PA30 Transaction and had data in Info type 0105.
    After this try to check with your EA-HR patch and SAP HR patch in the services. If  both are not maintained at the same patch levels such type of problems will occur.
    Regards,
    kishore.

Maybe you are looking for