Additionals Articles in Outbound Delivery.

Hi Experts,
I am very new in SAP Retail and I need your help for creating an end to end scenario for additionals articles.
So here is an overview that so far I've done. Please let me know if you think that it might be a missing configuration or functional step to complete it.
1. I created an additional article B and I assigned it to a main article A.
2. I configured the procedure for additionals for Sales Order and Delivery. (Event: 1.create, Delivery type and Document Category: Standard ones, Follow-up action: 1. Generate an additionals IDOC immediately.)
3. Then I created a sales order with article A. In the item line you can see an additionals indicator flagged (this means that additionals exist for the sales order document item). Also double click in the line it shows the additionals. So far so good.
4. Then I created an Outbound delivery in reference to this sales order but so far I haven't found a way to make the additionals appear in the delivery document or generate an IDOC after saving.
I'll give a good score for a good answer so please HELP!!
Regards,
Adriana

Thanks Rajesh for quick reply.
I did the same earlier but if delivery block is available in ECC and material is stage on hold area. and now after some time i need to dispatch same delivery, but now i am not able to remove delivery block from ECC, Beacouse Vl02N does not work after delivery distributed in EWM so how can i do PGI for the same .

Similar Messages

Outbound Delivery Document Flow (One-Step procedure) Goods Receipt

I am trying to extract the Goods Receipt status of Outbound Deliveries which are posted using One-Step procedure. I can do this one delivery at a time using VL03N.
Some sites (plants) are configured with One-Step procedure and others are configured as Two-Step procedure.
Document flow of an Outbound Delivery is extracted from table VBFA.
For the two-step delivery process (Movement type 641) the Goods Receipt is recorded in table VBFA (Subs.doc.categ. / VBTYP_N = 'i'). Therefore, I can easily extract the goods receipts for these deliveries.
However, for the one-step procedure (Movement type 647) the Goods Receipt does not appear to be recorded in table VBFA. Does anyone know which table the Goods Receipt is stored for one-step procedure?
Using transaction VL03N we can view the document flow. It appears that for One-Step procedure the Goods Receipt is held at item level. By highlighting a delivery line in VL03N and viewing the document flow we can see the goods receipt for One-Step deliveries (therefore, the data must be held somewhere).
I understand that by using One-step procedure the goods receipt is posted automatically, so we can assume that there should never be outstanding Goods Receipts for One-Step sites. However, I have been tasked with the job of reconciling all deliveries for the past 12 months. I need to prove that a goods receipt has been posted for every single delivery.
Any advice is much appreciated.

Thankyou for the advice. I will proceed with your recommendation.
However, the query is inefficient since the link between LIKP and MKPF does not use the primary key (Article Doc. / MBLNR). We have almost 7 million records in MKPF table.
Is there any intermediate tables I can include between LIKP and MKPF so that only primary keys are used for the joins?

Goods Movement and Updation of outbound delivery.

Hi,
I am using BAPI_GOODSMVT_CREATE to do a transfer posting with movement type 411K.After doing the posting I am updating the outbound delivery for the PO using BDC recording.
The problem is that after doing the transfer posting when I try to update the outbound delivery with picked quantity and picked date it is giving an error that "Article (the article number) is blocked".Due to this the outbound delivery is not getting updated.
Could you please help me to understand why I'm getting the error and how to eliminate it? Need your help urgently.
Thanks,
Sandeep.

Hello Shashank,
Thanks for your reply.
Please let me know do these bapis mentioned by you fulfill my requirement.
Any sample code u have to use this bapis.
Regards,
Tarun

Qty miss in outbound delivery

Dear Experts,
in some when we create outbound delivery with reference purchase order by T-Code VL10D, few article qty miss in outbound delivery why this happening has coming pls give the solution ....
and that will allow manually qty fill after extend the the date in outbound delivery
Best Regards
jagdish

Dear Jagdish ,
I believe system is not able to confirm quantity at order on said date , hence you will have to extend date for stock to be available ( availability check confirms quantity to sales order )
Kindly check stock requirement list MD04 and analyze whether materials is available for despatch on said date.
Try same and let me know results.
Thanks
Jinoy

Trigger TPSDLS01 IDoc to external TPS when outbound delivery is deleted

Hi,
We are currently trying to find a solution how to trigger a TPSDLS01 IDoc to external TPS when the outbound delivery is deleted.
In the following SAP article: Logical Communication Processes Between the SAP System and the T - Supply Chain Planning Interfaces (LO-SCI) - SAP Libra… it is said that "...If a delivery is deleted in the SAP system, this deletion command is transferred automatically to all transportation planning systems...". and we're trying to understand how it actually should be configured?
Any advice would be much appreciated.
Thanks!

Hi,
I know this is quite old now....but, did you ever find an answer to this problem?
SR

Outbound delivery printout issue.

Hi all,
Onreleasing an outbound delivery, Output form should be sent to Print Queues, without
any manual intervention. it will Possible in system?
Regards
RK

Hi Ramesh,
if you want to use a Print Queue other then the ones displayed in your screen shot, then you can define one in the Workcenter 'Application and user management' -> view 'Print Queues'
There are two comprehensive Help Center articles on this topic, you might want to check out that.
- A good overview on the options in "Process-Integrated Printing"
- technical step-by-step prescription on the print queues in "Print Queues Quick Guide"
Best regards
Michael

Updating delivery quantity in outbound delivery.

Hi,
I have to update the delivery quantity field of an outbound delivery from the quantity that is coming in through an idoc.Is there any BAPI to do the the updation? Also please explain the parameters which need to be passed in the BAPI.
I tried using a BDC recording but it gave an error that the article is locked.
Its urgently required.
Thanks,
Sandeep.

Hi,
Here are the some useful links.
BAPI to create delivery
Delivery
BAPI Outbound delivery
Please go through them
Regards,
Rama.Pammi

Outbound delivery Foreign Trade data Missing Country of origin of Material

Hello,
I am creating an outbound delivery but I need to make the Country of origin field automatically filled in the Foreign trade tab of the item level.
There is already an entry of country of origin in MM03 material master in the foreign trade export tab.
Does anyone knows how to make the Country of origin field automatically filled in the Foreign trade tab everytime I create an outbound delivery?
Thanks for you help.

Hi,
I have maintained in said customization node & its working fine for us. Please check the SHip to party & Shipping point country,
both should not be same.
Fore more info, find the below Wiki article.
[http://wiki.sdn.sap.com/wiki/display/ERPLO/CustomizingForeignTradeMasterData]
Regards,
Reazuddin MD

Good receipt with reference to outbound delivery document

Hello Gurus,
Could someone please help with the following scenario?
Article 1234 has base unit of measure pc, altenative measure box, 1 box = 12 PC
In the purchase order (stock transfer order from one site to another site) 4 box of article 1234 is ordered. Outbound delivery created with reference to the above purchase order (stock transfer order) has quantity of 4 boxes (this is copied from PO). And then an transfer order is created with reference to the above outbound delivery and quantity requested is 4 boxes (copied from outbound delivery), but in the transfer order confirmation the confirmed quantity is 14 pcs (this is now confirmed with base unit of measure). And now if we check the outbound delivery doc, the confirm quantity is 14 pcs (1,167 box )
But when creating good receipt with reference to the outbound delivery document, the quantity confirmed is now 14.004 pcs (this is calculated with unit of measure conversion table, i guess). But actually good receipt quantity should be 14 pcs instead of 14,004 Pcs!
What can we do in order to have 14 pc in good receipt?
Thanks in advance for your great help.
Br, Ailleen

Hi,
Thanks a lot for both of your answers. But if is there a way to receive 14 pcs instead of 14.004 pc although the system did the right calculation according to the conversion rules!
But in this case the supplying plant has issued 14 pcs but receiving plant has received 14,004 pcs and now there is discrepancy! Is there some enhancement or user exit could fix the situation or do I have to change the coding in order to solve this problem!
Thanks again for you helpful advice!
Br, Ailleen

How to compare delivery date in schedule lines and PGI in outbound delivery

Hi,
I want to create a report to monitor and compare different dates in sales and delivery process.
One of my key figure is the comparison between date confirmed to the customer, that I can find in the schedule line of the sales order, and the actual goods issue date from the outbound delivery.
But I can't succeed in making the link between delivery and schedule lines, means between LIKP and VBEP.
Would you have any idea?
Thank you.

It seems there's no exact (table) connection / link between delivery item and schedule line item.
Those who were searching for this thing (link / connection between delivery item and schedule line) were recommended to use FM "RV_SCHEDULE_CHECK_DELIVERIES".
This FM calculates the delivered quantity for each schedule line, so it makes link between the delivery item and schedule lines - however if you check the code it's quite sophisticated...
(if you put a breakpoint in the FM and display a SO in VA03, you can check how the parameters have to be populated with data).
Schedule Line and Delivery Link
Edited by: Csaba Szommer on Aug 5, 2011 12:03 AM

Need BAPI for MIGO to create a Goods Receipt against PO &Outbound Delivery

Hi Friends,
GRNs (Good receipt notifications) created in DHL (Non SAP system) will need to be communicated to SAP.
I need to post goods receipt using input data in MIGO. Is there any BAPI that i can use.The requirement is like below:
PO number field in output file is checked against entries in EKKO-EBELN, if a match is found the GR is posted against a Purchase Order otherwise LIKP-VBELN is checked and if a match is found GR is posted against an Outbound Delivery.
          If PO Number = EKKO-EBELN    GR against Purchase Order
                        = LIKP-VBELN      GR against Outbound Delivery
Based on the above condition I need to create a Goods Receipt.
Could you please tell me the GM code, movement types and the required fields to be passed for the BAPI?
The fields available are with us are...
Header text. - Bill of Lading- Posting Date-Quantity- UOM--- Vendor Batch / Batch / Serial No --- PO Number or Delivery Number SLED
Are these fields sufficient for doing MIGO with the BAPI or do we require more fields???
Please provide sample code if possible.
Waiting for replies,
Thanks and Regards,
Sudha

Hi Friends,
GRNs (Good receipt notifications) created in DHL (Non SAP system) will need to be communicated to SAP.
I need to post goods receipt using input data in MIGO. Is there any BAPI that i can use.The requirement is like below:
PO number field in output file is checked against entries in EKKO-EBELN, if a match is found the GR is posted against a Purchase Order otherwise LIKP-VBELN is checked and if a match is found GR is posted against an Outbound Delivery.
          If PO Number = EKKO-EBELN    GR against Purchase Order
                        = LIKP-VBELN      GR against Outbound Delivery
Based on the above condition I need to create a Goods Receipt.
Could you please tell me the GM code, movement types and the required fields to be passed for the BAPI?
The fields available are with us are...
Header text. - Bill of Lading- Posting Date-Quantity- UOM--- Vendor Batch / Batch / Serial No --- PO Number or Delivery Number SLED
Are these fields sufficient for doing MIGO with the BAPI or do we require more fields???
Please provide sample code if possible.
Waiting for replies,
Thanks and Regards,
Sudha

Goods Receive for Outbound Delivery Without Reference using MIGO

Dear Colleague ...
We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
(1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
(2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
(3) The first 2 (two) cases work just find with MIGO. We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
(4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5". We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
(5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
Appreciate for any thoughts or input on the above. Many thanks,
Alvon Sibarani

use transaction mb0a it will work for the scenario.

Stoarage location is not being reflected in the outbound delivery

Hi
I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery . Since this storage location is WM managed hence the WM status shows that the transfer order is not required .
When i tried to put manually the storage location the system throws an error that this storage location in not maintained in plant R001 .
Althoght the stoack has been there in the stoarage location with resepct to plant ans also the matrerial master is also been extended for this storage laocation and all the respective views such as WM and Sales hasbeen maintianed .
Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
Thnaks and Regards
RAJ K

Hi,
did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
stor.conditions (table TVKOL)?
Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
Regards,
Ely

Output types are not getting displayed in Outbound Delivery in Display mode

Hello,
The actual requirement is that output types should get attched to the outbound delivery when we do GI(Good Issue) on the outbound delivery.
So, I have created an outbound delivery and did GI on it through IDoc. But, I can not see output types on the delivery (To see output types, go to Extra -> Output -> Header in VL03N) in the display mode. However, I can see in change mode (VL02N).
Could you please suggest the solution for this?

Hi sreeram,
go to crm -> transactions -> basic settings -> define transaction types
copy default email cx03 and create new zemail.
assign that zemail to bus2000126 business activity.select the business activity and click on customizing header.assign the category email. click on channel. maintain the channels 1)GUI crm webclient UI, 2)ICW Interaction center webclient.
save the changes.
go to crm -> transactions -> basic settings -> settings for activities -> maintain categories, goals, priorities -> click on assign categories to transaction types.
assign the category email(which you have assigned above) to the transaction type zemail.
even check maintain categories as well
click on maintain categories -> check 401 email assigned to class G email.
Regards
Krishna

Problem with IDoc for an outbound delivery

Dear All,
I am facing a problem with the IDoc defined for an outbound delivery.
Scenario:
Implementation of a small enhancement for an IDoc (DESADV, DELVRY01) created for an outbound delivery (in VL02N).
What I did:
I implemented the EXIT_SAPLV56K_002 exit in the V56K0001 enhancement, activated in SMOD, assigned V56K0001 component in CMOD and acivated it. Then I put a breakpoint on the ZXTRKU02 include. For me everything in SMOD and CMOD looks OK.
I have also created a partner profile, port, outbound message config. (message DESADV, basic type DELVRY01, application V2, output message type LAVA, process code DELV. function module used for this process code is IDOC_OUTPUT_DELVRY).
What I can do:
I can issue an IDoc message, it looks ok and contains the standard data.
Problem:
It seems that the enhancement does not work. Finally I put there only one line of code to avoid a program bug and just to check . The system does not stop at the breakpoint (set on the ZXTRKU02 include in the EXIT_SAPLV56K_002 exit).
Am I using the proper exit? I appreciate any suggestions.
Thanks,
Grzegorz Skorus

Hello Grzegorz
Not an expert on this, but noone is responding so I thought let me try and help you. You seem to be doing the right things as mentioned in OSS note 1498409.
Firstly since this can be called form Shipment Idoc also, you may need to make a differentiation by the interface parameter 'MESSAGE_TYPE' or segment name. See the attached OSS note, though it belongs to older releases, it may help you.
Also help says 'The callup of this function module is programmed for each enhancement of the internal table for the IDoc (in other words, when you add an extra segment'. So may be you need to add an extra segment/field to make it work.
Futher the user exits are replaced by BADIs. May be you should use exit_badi_v56k.
Hope this helps and others will pitch in.
1498409 - Valuation Type unavailable when creating deliveries using IDOC
631913 - Exit after formatting delivery IDoc type DELVRY

Additionals Articles in Outbound Delivery.

Similar Messages

Maybe you are looking for