Outbound delivery printout issue.

Hi all,
Onreleasing an outbound delivery, Output form should be sent to Print Queues, without
any manual intervention. it will Possible in system?
Regards
RK

Hi Ramesh,
if you want to use a Print Queue other then the ones displayed in your screen shot, then you can define one in the Workcenter 'Application and user management' -> view 'Print Queues'
There are two comprehensive Help Center articles on this topic, you might want to check out that.
- A good overview on the options in "Process-Integrated Printing"
- technical step-by-step prescription on the print queues in "Print Queues Quick Guide"
Best regards
Michael

Similar Messages

ERP-WM automatic Outbound Delivery Goods Issue upon TO Confirmation

Hello all,
We have the following scenario :
Stock Transfer Order -> Outbound Delivery -> Transfer Order -> Picking -> TO confirmation
When the TO is confirmed, we customized the system to post the Goods-Issue automatically.
Now, we would like to stop the Auto-GI on specific situations. To do that we would like to use BADI, UE or Enhancement-Point.
Since the Auto-GI is done in the background, we cannot make sure which enhancement to use - Breakpoints do not help (again, because it is done in the background).
My question - does anybody know which program is run in the background for the auto-GI ? OR, does anybody know which UE etc. can be used and may stop th auto-GI ?
Thanks,
Isaac

To my knowledge, there is no user exit or BADI for this purpose.
A proper solution depends on the way each transaction is executed and the criteria for allowing auto GI.
If the user is confirming the transfer order in transaction LT12 and provided he knows the GI should not happen then the indicator 3 can be selected for 'Adopt Pick. quantity'. This will override the movement type config and not post the GI for delivery.
On other hand if you are confirming TO via RF transactions or batch jobs then you insert the coding logic to set this indicator where required.
Hope this helps.

STSA - Outbound Delivery - ASN Issue

Hi,
Following is our process flow.
1. STSA ( Stock transport scheduling agreement )
2. Outbound delivery based on STSA
3. ASN from OBD (Step 2)
4. Inbound delivery created based on ASN from step 3.
Now, we see a problem during ASN Outbound. We see that E1EDL41 segment not getting filled up. Further analysis reveals that E1EDL41 is filled by VBKD table details. In case of STO, there will be no VBKD data as it is a MM document.
Please suggest if there are any OSS notes, config and finally if there are any exits through which E1EDL41 can be filled up in STO process.
Thanks & Regards,
C.L. Narasimhan "CLN"

Hello CLN
I am not a Techie, but let me try and help you.
Can you try setting E1EDL41-QUALI to '003' ( suggesting that there is no preceding sales document) and see? See OSS note
1161130 - DELVRY03 - Predecessor data looked for when not required.
Also if you are working in a Decentralized WMS scenario, you can take a look at a couple OSS notes:
795584 - No E1EDL41 and E1EDL43 in DESADV IDoc from decentralized WMS
1274050 - No E1EDL41/E1EDL43 in DESADV IDoc from decentralized WMS (2)
922776 - No E1EDL43 in the DESADV IDoc from decentralized WMS (STO)
Hope this helps. Let me know.
I am not a Techie.

Automatic goods issue for outbound delivery without picking/packing

Hi,
I have the following flow: sales order -> outbound delivery -> goods issue.
I would like to to be able to post an automatic goods issue on my delivery.
Could someone please let me me know how to perform the customizing for this or give me the reference of the appropriate post which answers this.
Thanks,

Hi,
Use t-code VL23
select varient SAP & STANDARD >>> Click on START IMMEDIATELY
or else
click on schedule >>> click on schedule periodically >>> select your option as Minute and maintain value 1 or ( 1 to 60 )
it means sytem will run this program after every one minute
Also You can able to create your own varients and speciefy criteris like form which sales orz, which delivery types etc.
Kapil

Exclusion MRP Outbound TF delivery goods issue

Dear guru ,
I have an outbound delivery goods issue with movement 313.
The MD04 evidence the outbound delivery as negative requirement.
But this a TF between the same plant.
How can i exclude this element in MD04 and MRP ?
Thanks.

Dear ,
With MRP Type ND mrp don't consider all requirement.
I have mrp type PD and i don't understand why MD04 consider delivery goods issue with movement 313 only with negative requirement.
This is TF between the same plant.
Bye.

Smart form for outbound delivery

Hi Can anybody tell me which smart form is used for outbound delivery also. Can some one tell me what is the process of taking out printout put of outbound deelivery what is the T code for that.
Urgent help is required.
Thanks,
Lekhram

Hi Lekhan,
The answers given by the other two persons is right.
If you want to take a output for a single document you have to take it from delivery change mode initial screen. click on menu outbound delivery, next issue output to, a pop up appears. Here system will show you the condition types available( if assigned). select the condition type you require and you can print it or you can have a preview.
If you want to have output for several documents go to VL71 transaction code give the range of documents and have your output.
You have lot of options for having an output from delivery be clear what is your requirement.
If this message gives you the result don't forget to reward points.
Thanks
Venkat Cheeedalla

Substitution of order number in outbound delivery

Hi folks,
Ihave the following process: Purchase order for intercompany transfer of goods. After that from the SD is started the outbound delivery, goods issue and billing for the transfered goods. What i need for reporting in CO is an assignment to CO object for this movement. What I get is the default profit center of the moved material, inherited from the purchase order. Could I have a substitution or something, which van manage this
10x

Hi,
Good evening and greetings,
You can create a Substitution rule using GGB1 for changing the CO assignment for the same and process.
Please reward points if found useful.
Thanking you
With kindest regards
Ramesh Padmanabhan

Issue while creating Outbound Delivery using Standard BAPI

Hi all,
I am trying to create an outbound delivery for a Sales order using the Standard BAPI - BAPI_OUTB_DELIVERY_CREATE_SLS.
After giving the valid inputs for Sales order no and doc no, am getting an error as "No instance of object type OutboundDelivery has been created. External reference:" But when trying to create manually there is no problem. Please suggest what may be the issue and how to correct it?
Regards,
Vimala P

Hi Vimala,
I am trying to create outbound delivery using BAPI_OUTB_DELIVERY_CREATE_SLS & BAPI_DELIVERYPROCESSING_EXEC. But no success. Getting "No instance of object type outbound delivery has been created" in return.
1) Delivery Type
2) Delivery selection date
Needs to be passed in import parameters.
Could you please tell me what are all the parameters to be passed under tables tab in RV_DELIVERY_CREATE?
Thanks in Advance..
Regards,
Rajasekar .M

Post a good issue against an outbound delivery with movement type 601 K

Hello,
according to my business scenario I need to manage the stock of different vendors into the client's location (plant) at storage location level and I need to post the good issue against an outbound delivery to decrease the stock level.
Since the owner of the goods isn't my client the item is managed only at quantity level (not value) so I'm not interesed in the accounting document.
To do it I'm using the functionality related to the vendor consignment stock but I'm not able to post the good issue against an outbound delivery using the movemement type 601 and the special stock indicator equal to K.
In particular I've tried in two different ways:
- setup the consignment stock indicator (= K) into the sales item category, but when I post the goods issue the system is not able to find out the right vendor
- to create a stock determination rule instead of the setting previous described, but the system display an error message (Fld selectn for mvmt type 601 / acct L534200770 differs for Cost center (010) ) even if the accouting is not relevant in my scenario
Can you suggest me how the system has to be setup in order to cover my requirements?
Thanks in advance,
Alessandro

Hi,
Please clarrify which material type you are using in this scenario? I suggest you to use material type UNBW (no value updation will be there) and create a material master. Use special stock indicator K. Proceed with 601K to do GI. Hope it works. Thanking you.

Outbound delivery output not re-determined during goods issue?

Hi,
i'm currently in the process of testing an SAP upgrade from 4.6B to ECC 6.0, and have encountered the following problem: one of our outbound delivery output types (LD00) is supposed to print out at goods issue (which happens in VT02N, by the shipment).
In 4.6B, the output determination procedure correctly triggers at goods issue, however, in 6.0, it doesn't. Re-opening the delivery in VT02n causes the LD00 to be determined after all, but by then it's too late.
Does anyone have the slightest idea why the output determination isn't re-evalutated at goods issue?
regards
Rob

Hi,
Perhaps you are using an own VOFM subroutine to do filters if the output works or no. You create this subroutine with tcode VOFM, and after some steps you create an include in a report of SAP (SAPL). You can check if you are setting a VOFM in SM34/VVC_T683_XX_E1 for the output scheme. Sometimes is necesary to run this report to create and activate the report sapl, if no, when the abap call the subrutine, SAP doesn't find (perform * if found)
For VOFM there is a good document in google, format PDF, search it with the string inside vofm ext:pdf.
I hope this helps you
Regards,
Eduardo

Idoc to post goods issue against an outbound delivery

We happened to simulate both the idocs 'WPUWBW01' and 'MBGMCR02' for posting goods issue for an outbound delivery but failed.
Request you people to help us on this. Is there another idoc that we have to use to post GI... if so please let us know... and if we are using the right one, guess we are not executing it in the right way... in such a case please guide us with the steps...
Thanks
Arun
We got hold of the Idoc type 'DELVRY03 PGI SHPCON' we are able to post the Idoc but we are able to do the packing only or we are able to change the deliveries but the PGI is not happening..
please help us on this.. is there some condig that updates the delivery with the PGi or is there something else do be done in the Idoc....
will provide additional details if required.
Thanks

Hi Arun,
There are no configuration settings in this. It is development that your abaper need to carry out.
Explain to him that this is the func module. And intrun it has to either trigger a BDC or BAPI for creating packing and PGI.
He should then do the recording of that and will assign the program pertaining to BDC with in the function module.
One more suggestion is to put the same query in ABAP section too. U will definitely get a positive response.
Hope this helps.
Kind Regards
Chakradhar

Goods issue to customer without sales order or Outbound delivery

Dear all gurus,
I have a case like that: Supposing we don't have neither Sales Order nor Outbound Delivery (because not implement SD, for eg).
Then, we stil want goods issue to customer. So can u advise me how to do: which Tcode, which movement type,...
Thanks,

Hi,
Create a cost center for customer and issue the goods with respect to this cost center in MB1A transaction using movement type 201.
Then all the issues will be tracked based on this cost center.
Regards,
Bharat

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Goods Issue for a Return Outbound Delivery for both Sales Returns

Hi gurus..
tell me the approch for the following development....
custom transaction to perform a Goods Issue for a Return Outbound Delivery for both Sales Returns and Consignment Returns (Pickups) process within a lean warehouse in SAP.
it is vry urgnt
thnks

I seem to have found the information I required here:
http://wiki.sdn.sap.com/wiki/display/Snippets/Simulating+the+Sales+Cycle+with+BAPI's
I'm going to keep this post active because I'd still like answers to my questions and any advice that you might be willing to share in regards to what I am trying to do.
Edited by: Mikael Nensén on May 18, 2011 3:52 PM

Automatic Goods Issue in Outbound delivery scenario with resp to Shipment

Hi,
Could you please explain me, how Automatic Goods Issue happens in Outbound delivery scenario process and in shipment process.
Is there any transaction for this?
Can we use VL23 for Automatic Goods Issue in Shipment process? or is it only for Outbound delivery scenario?
How we schedule a background job by using VL23- transaction, how we create variants on what selection criteria?
Could you please explain me in detail?
Thanks A lot.

Hi Anil,
VL23 is to schedule Out bound Goods issue.Check once T.code VL06O.
Thanks,
Sree.Manam

Outbound delivery printout issue.

Similar Messages

Maybe you are looking for