ADDS Errors

I have recently rebuild one of RODC , its continuously trowing error like below. I suspect DNS but not sure. I cannot ping my DC by name from the RODC but connectivity is fine as I can ping with ip without any issues.
The errors:
An attempt by the local domain controller to automatically update information on one or more of the Computer object,
the Settings object, or the Server object failed.
The Knowledge Consistency Checker located a replication connection for the local read-only directory service and attempted to update it remotely on the following directory service instance. The operation failed. It will be retried.
please help.
Empower..Enlighten..Enrich.. SK

Hi,
Here is a blog written by Ace Fekay regarding how to remove an old DC then introduce a new one with the same IP address and name I suggest you refer to:
Remove an Old DC and Introduce a New DC with the Same Name and IP Address
http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How to add error message to return structure of calling BAPI from a BADI

i have a bapi where a badi is triggered.this badi method has just importing and changing parameters.is there any way with which i can add error message to the return structure of calling bapi.please reply at the earliest.High points can be expected.

thanks got it

SBO 2007a - oInventoryGenEntry .Add() Error -5002

We convert the com-DI to work with the new SBO 2007a after upgrading and this code only stop to
work and return -5002
m_InternalDocObj is of type SAPbobsCOM.BoObjectTypes.oInventoryGenEntry
:(here is the code...)
'region document -add data
MyBase.m_InternalDocObj.CardCode = ""
MyBase.m_InternalDocObj.DocTotal = 1
'Document_Lines is a child object of Documents object and represents the line entries of a
document in the Marketing Documents and Receipts module
'and the Inventory and Production module.
'Region(oInvGenEntry.Lines) - add data
MyBase.m_InternalDocObj.Lines.ItemCode = itemCode
MyBase.m_InternalDocObj.Lines.AccountCode = ""
MyBase.m_InternalDocObj.Lines.ItemDescription = ItemDescription
MyBase.m_InternalDocObj.Lines.WarehouseCode = WHcode '
MyBase.m_InternalDocObj.Lines.Currency = Currency
MyBase.m_InternalDocObj.Lines.Price = GRTotalPrice
MyBase.m_InternalDocObj.Lines.Quantity = SerialsQuantity
For i = 0 To SerialsQuantity - 1
ManufacturerSerialNumber = ManufacturerSerialNumber + i
MyBase.m_InternalDocObj.Lines.SerialNumbers.ManufacturerSerialNumber =
ManufacturerSerialNumber.ToString()
MyBase.m_InternalDocObj.Lines.SerialNumbers.InternalSerialNumber = ""
MyBase.m_InternalDocObj.Lines.SerialNumbers.BatchID = BatchID
MyBase.m_InternalDocObj.Lines.SerialNumbers.Notes =
ManufacturerSerialNumber.ToString()
MyBase.m_InternalDocObj.Lines.SerialNumbers.Location = ""
' The last Lines.SerialNumbers should not used Lines.SerialNumbers.Add()
If i = SerialsQuantity - 1 Then
Else : MyBase.m_InternalDocObj.Lines.SerialNumbers.Add()
End If
Next
m_iErr = MyBase.m_InternalDocObj.Add() - Error ocured here -5002
thanks in advance
yaniv

Hello,
So,
Please decide whihc serial number type you are using
Only the First Row of Serial Numbers collection is not necessary to use the Lines.SerialNumbers.Add()
So,
For i = 0 To SerialsQuantity - 1
' add a new lines to Serial numbers collection
if i > 0 then Lines.SerialNumbers.Add()
Lines.SerialNumbers.SetCurrentLine(i)
' Check the AdministrationSystem Init .. General SettingsInventory TAB for Unique Serial Number type...
ManufacturerSerialNumber = ManufacturerSerialNumber + i
MyBase.m_InternalDocObj.Lines.SerialNumbers.ManufacturerSerialNumber =
ManufacturerSerialNumber.ToString()
MyBase.m_InternalDocObj.Lines.SerialNumbers.InternalSerialNumber = ""
' Not Needed MyBase.m_InternalDocObj.Lines.SerialNumbers.BatchID = BatchID
MyBase.m_InternalDocObj.Lines.SerialNumbers.Notes =
ManufacturerSerialNumber.ToString()
MyBase.m_InternalDocObj.Lines.SerialNumbers.Location = ""
' The last Lines.SerialNumbers should not used
'not needed If i = SerialsQuantity - 1 Then
'Else : MyBase.m_InternalDocObj.Lines.SerialNumbers.Add()
'End If
Next
Regards
János

[svn:osmf:] 15426: Add error string for when PlayTrait. pause is invoked and canPause is false.

Revision: 15426
Revision: 15426
Author:   [email protected]
Date:     2010-04-14 13:22:45 -0700 (Wed, 14 Apr 2010)
Log Message:
Add error string for when PlayTrait.pause is invoked and canPause is false.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/traits/PlayTrait.as
    osmf/trunk/framework/OSMF/org/osmf/utils/OSMFStrings.as

Problem Resolved!
          I found out that I had 'http' instead of 'httpd' in the statement where I
          registered my servlet, SqlServlet.
          Now, I am having difficulty with hot deployment. The server is returning
          error 404.

Chart of Account Add Error-

Hi Everyone,
I try add account, but SAP return message error: "This entry already exists in the following tables..... OACT"
This account not exist,
I see Thread Hi,Error when adding chart of account This entry already exists in the foll,
but don´t function for me
Someone have Idea?
Very thanks

Hi,
Since above query returns value, you need to contact SAP support. Refer SAP note:
1907602 - Error on trying to add a new G/L Account in Chart of Accounts window.
Thanks & Regards,
Nagarajan

How to add errors/alerts to ignore list?

Hi,
I want to add some errors and alerts to ignore list.
How to do that?
Thanks
Vijay
Edited by: cherukuri on May 29, 2011 2:49 PM

Handle:      cherukuri
Status Level:      Newbie
Registered:      Nov 15, 2010
Total Posts:      30
Total Questions:      24 (12 unresolved)
so many questions & so few answers.
I want to add some errors and alerts to ignore list.
How to do that?exactly to which ignore list do you refer?
post SQL & results so we can see what you do & how Oracle responds.

Add error message to application log from BADI

Hi All,
I am working on a BADI......
As the txn is already adding its messges in log thru BAL_LOG_CREATE, BAL_LOG_MSG_ADD...etc......
after that my badi comes into picture.....and it displays the message in POPUP
Now i want to add my error message form BADI to this already created log .....
Kindly suggest...
Note..I tried to use BAL_LOG_MSG_ADD it got add but the display is in full screen...not in POPUP....
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXCEPTIONS
    PROFILE_INCONSISTENT = 1
    INTERNAL_ERROR       = 2
    NO_DATA_AVAILABLE    = 3
    NO_AUTHORITY         = 4
    OTHERS               = 5.
Thanks
RK
Edited by: Rahul Keshav on Sep 8, 2010 12:50 AM
Edited by: Rahul Keshav on Sep 8, 2010 12:51 AM

The scenario is.....
we are in an appraisal form thru txn phap_admin...
now for goal weightage.....there is a std check ...for entered value.....check value for multiple of 5.....
if we enter weightage as 4 ...system will make it 5 and a std POPUP will display stating that the value 4 has been changed....
this is a std log....
now i have to implement a badi HRHAP00_VAL_DET......for calculating the total weightage.....
I have to throw an error if the total weightage is less then 100%....
i cant use message type 'E'...in Badi...
so i want to add my error message in the std log...so that both message comes in one log/popup only.....
If you goto se80...and for function group HRHAP_UI_DOCUMENT....
you can seen the subroutine...
form f3100_popup_value_log_create
here the std messages are adding to the log.....
simillary i want to add my message too ..inside the badi....in the same log....
thnx
RK
Edited by: Rahul Keshav on Sep 8, 2010 10:20 PM

How to Add error message for component from the baking bean

I am in the situation, I need to add the h:message message component for each component at the time I am looking for an easy process something like I have to add the error message at the bean side, here I am using component binding approach but I am not able to add child for input Text components at the bean side, actually my final target is to add the message for each component when ever they get error and I have to change the style also.....
So please anybody help me......

Thanks for the response but one more thing right now I can't add message tag for each component so that I can add message from the baking bean as per ur solution I tried like this
FacesMessage msg = new FacesMessage("Testing is going");
msg.setSeverity(FacesMessage.SEVERITY_ERROR);
FacesContext.getCurrentInstance().addMessage(tf_ADD1.getId(), msg);
it is working but it is showing on the top of the for even no problem but I need to change the component color based on the message but I am not able to achieve that so how can I do that from backing bean now I can't add tags for each component.
So please show me a way.

Need help - Deleted domain and can't re-add - Error domain already exists - Site down

In trying to reconfigure our domain setup, I removed the main domain name in an attempt to re-add it so that it does not point to an external DNS server.
I deleted the domain and now when I try to re-add it, I get the following error:
Domain already exists. Please delete all records associated with this domain before re-adding it.
I have no way to submit a ticket when I go to help and support and our site is now down from the main page. I need help ASAP.
I was able to submit a case when I switched browsers (Chrome apparently does not display the search bar/case submission). The case is
OBNW5020171
The domain I am trying to re-add is surfaid.org

Hi,
I just wanted to followup to see how this case is progressing. This is
very URGENT as our main URL is down and we are in the final stages of a
major campaign where participants have been instructed to go to our website
to sign up which could result in a loss of a lot of donations.
Any priority this can be given would be very much appreciated.
Thank you!
Emily Taylor
On Wed, Jan 9, 2013 at 11:25 AM, Sidney Mitchell

Disk add error on OVM

Oracle VM server release 2.1.2
Linux
Hi There,
I'm getting an error when I want to add a disk on OVM. There are all ready 16 disks (a-p), but gets error on 17th (p)
Error: ('cd81da11-4f92-0eeb-b6b2-d2f27521246f', 'VM_metrics')
Here is the config file :
name = "***o2db01"
memory = "8192"
disk = [ 'phy:/dev/mapper/mpath17,xvda,w',
'phy:/dev/mapper/mpath0,xvdb,w',
'phy:/dev/mapper/mpath1,xvdc,w',
'phy:/dev/mapper/mpath10,xvdd,w',
'phy:/dev/mapper/mpath11,xvde,w',
'phy:/dev/mapper/mpath12,xvdf,w',
'phy:/dev/mapper/mpath13,xvdg,w',
'phy:/dev/mapper/mpath14,xvdh,w',
'phy:/dev/mapper/mpath4,xvdi,w',
'phy:/dev/mapper/mpath5,xvdj,w',
'phy:/dev/mapper/mpath6,xvdk,w',
'phy:/dev/mapper/mpath7,xvdl,w',
'phy:/dev/mapper/mpath8,xvdm,w',
'phy:/dev/mapper/mpath9,xvdn,w',
'phy:/dev/mapper/mpath15,xvdo,w',
'phy:/dev/mapper/mpath19,xvdp,w',
'phy:/dev/mapper/mpath21,xvdq,w',
Is there a limit on the amount of disks that can be added?

Hi,
yes in OVM 2.1.2 there was a bug, allowing only 16 xvd* devices.
Workaround is to use /dev/sd* as device.
Better it would be to upgrade to OVM 2.2 where this is solved.
(Or even 3.0, but this is a major task).
Regards
Sebastian

Is it possible to add error message in me21n ?

i post this question before , but didn't
get any answer .
i add subscreen to me21n by (MM06E005).
now i want to add message to inforce the user to fill
the field in the tab .
i tried to do so in the exit but its just lock the
customer data tab .
i tried exit EXIT_SAPMM06E_012 .
the problem's are :
1) is possible ?
2) if yes than where ? (EXIT_SAPMM06E_012 ? )
3) if yes how can i solve the problem that in the edit
( in the save process ) the user don't get the customer data tab of my ( go back to the last tab he was ) ?

Hi,
Yes..The macro is available in the top include of the user exit..
You can use it as I mentioned above..
I took the example from a standard program..The l_illegal_char is a field..
Try this example..
mmpur_message 'E' '00' '208' 'Custom field not populated' '' '' ''.
Thanks,
Naren

Add error description from sxmb_moni in alerts in 7.1

Hi Gurus,
My requirement is to add short description from sxmb_moni i.e. from ABAP stack in alert.
I already have check many blogs and marketplace but could not find this.
As per the link Creating Alert Categories - Process Integration Monitoring - SAP Library we can extract this info from adapter engine using SXMS_TO_ADAPTER_ERRTXT but how to achieve this for I.E.
Please let me know if this is possible in any other way around.
Hope my requirement is clear, i just want the description from moni for the failed message in my alerts.
Thanks and Regards
Jitender Gusain

Hi Jitender
We can use following container variables to populate the text inside the alert message
These are more than enough for debugging the message in MONI.
However if you want to add the payload information in the alert message, then u need to use the function module SALERT_CREATE
You can call this function module inside message mapping using RFC look up or via UDF.

How can I add error handling facilities to this code?

Hi everyone, i have this code that needs some error handling facilities (messages that warn user the data inputted is not valid that prvent crashing) added to it. I have no idea on how to do it and i accept any ideas. I'll post the code in two sections as it doesnt fit. The code works by recieveing inputs for student grades and calculating the total and the average. That works fine, but i need to include an error handling facility that doesnt allow the user to input letters, special characters or numbers outside the range 1-10. Can anyone help?

Code Part 1:
import java.text.DecimalFormat;
import javax.swing.JOptionPane;
import javax.swing.*;
import java.util.*;
//Defines the counter for the student count and uses a usage method to
public class EdronProject {
private              int           studentCount;
private static final String        USAGE = "Usage: java EdronProject <student count>";
private              List<Student> list;
//Set up the counter fo the number of students and the list in which
//each student's information is saved once processed
public EdronProject(int count) {
    studentCount = count;
    list = new ArrayList<Student>();
//Checks the number or arguments, and it executes the rest of the code
//if there is 1 argument or more (the number of arguments = the number
//of students being processed)
public static void main( String args[] ) throws NumberFormatException {
   int count = 0;
   switch (args.length) {
     case 1: count = Integer.parseInt(args[0]); break;
     default: System.out.println(USAGE); System.exit(0);
//Defines method for processing and printing students within the
//EdronProject class
    EdronProject edp = new EdronProject(count);
    edp.processStudents();
    edp.printStudents();
class Student {
//Define integer values for the 5 subject's grades, the gradeCounter (used
//in the processing stage) and the student name string
      private int
                gradeCounter,
                grade1,
                grade2,
                grade3,
                grade4,
                grade5;
     private double total;
     private String studentName;
//Use setter getter methods for the student name to be retrieved
    public void setStudentName(String name) {
       studentName = name;
    public String getStudentName() {
      return( studentName );
//Use setter getter methods for the grades inputted to be retrieved
//by the processing stage
    public void setGrade(int gradeNo, int grade) throws IllegalArgumentException {
      switch( gradeNo) {
        case 1 : grade1 = grade; break;
        case 2 : grade2 = grade; break;
        case 3 : grade3 = grade; break;
        case 4 : grade4 = grade; break;
        case 5 : grade5 = grade; break;
        default: throw new IllegalArgumentException("ERROR: Bad grade number passed!");
//Increase grade counter for it to register the number of grades inputted
//by user
      gradeCounter++;
    public int getGrade(int gradeNo) throws IllegalArgumentException {
      int grade = 0;
      switch( gradeNo) {
        case 1 : grade = grade1; break;
        case 2 : grade = grade2; break;
        case 3 : grade = grade3; break;
        case 4 : grade = grade4; break;
        case 5 : grade = grade5; break;
        default: throw new IllegalArgumentException("ERROR: Bad grade number passed!");
//Return grade values for them to be used by the processing stage
      return( grade );
    }

Music - "Unable to Add" Error - NOKIA C7 (ANNA)

Thru the New Nokia Suite - 3.2.100 I'm unable to add music from my PC to the suite. The older version had no issues like this one. Music could be added to the suite and then saved to the phone. This one is not allowing to do so.

if you just want to add music file, you don't have to use Nokia suite at all. after conecting the USB cable (or bluetooth connection), to select the "mass storage" mode in the phone side, then, PC will regard your phone as one removable disk, just copy your favorite file to your C7, it's very easy!
Good luck!
if this answer is helpful for solving your issue, pls press the white star, thanks!

Excel Add Error Botton |Aktualiesieren| appears 6 Times

Hello again,
I installed the Excel Add in from Oracle BI EE 10.1.3.2.1.
After a restart I was able to use the Excel AddIn.
Except: The Botton <|Aktualisieren|> appears 6 Times.
Ist it possible to configure this with Excel 2002?
Regards,
Stefan

Hello again,
I installed the Excel Add in from Oracle BI EE 10.1.3.2.1.
After a restart I was able to use the Excel AddIn.
Except: The Botton <|Aktualisieren|> appears 6 Times.
Ist it possible to configure this with Excel 2002?
Regards,
Stefan

ADDS Errors

Similar Messages

Maybe you are looking for