Adf changes Warning
I Have a showDetailItem, and inside a adfRegion, i want to warning to thw user if there are changes in the VO, for example the user delete without commit, i tried the UncommitedDataWarning and it works only when a i change the task flow in the region, BUT WHEN I HIT EN THE CLOSE BUTTON of the ShowDetailItem nothing happend and the task flow close witouth warning the user.
I also tried finalizer on the taskFlow but its work when the taskflow CLOSE, i need to warning to the user with the task flow open.
I also trien the listener of the ShowDetailItem, but i can´t stop the close action of the component.
Hi,
does the task flows share the data control with its parent ? If so then you are still on the same page and no warning would be needed (from a farmework perspective). If the task flow does share the DC then you can use
ControllerContext.getInstance().getCurrentRootViewPort().isDataDirty() in a managed bean upon closing (use a component listener)
Frank
Similar Messages
-
Update (0 new / 0 changed) Warning received Message Missing Update Finished
The FULL load is running for long time and after some time it fails with processing Overdue. ( It is loading directly into datatargets no PSA as this is Daily FULL load to cube, deleting the previous request) The job overview is successfully finished in source system.
While load running in details tab under processing..
1)Data Package 6 ( 7407 Records ) : Missing messages -->
2)Update ( 0 new / 0 changed ) : Warning received
3)Message Missing: Update Finished for Cube
4)Processing end : Missing messages .
When clicked on helpnode on each step:-
1)Data Package
A data packet is either sent with transfer method IDoc or PSA to BI. You have the option here of viewing the data received and of editing it where necessary, of posting the data packet in simulation, and of canceling in simulation, and, if it has not yet been posted successfully, of starting the update manually.
2)Update
See also Data packet processing steps
By this the persistent saving of data is understood in its final target object
3)Processing Message
see also Data Packet Processing Steps
Single message from the processing of a data packet. Some messages contain references to application logs or other requests. The monitor then allows corresponding jumps.
4)Processing End
see also Data packet processing steps
If the processing of a data packet has been finished then any error messages for each process in the step up until this point are delivered to the monitor and to the called program (in the case of transferring by IDoc thus to the IDoc management). If no errors arose then a success message is logged per process.
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.Hi
Try to transport the request again and check...
Perform the consistency test with 'RSRV'...
Check notes in this link if they could help u....UNCAUGHT_EXCEPTION
Regards
Gaurav -
Change warning to error message in Confirmation (CN25)
Hi All,
Please advice how to change warning message to error message . I have network activity and fill the work value = 30 HA. but it seems that users can still posting the confirmation more than the value inputted.
100% of planned time already recorded - please check
Message no. RU254
Application Area : RU , Message 254 , program SAPLSHL2
Cheers,
Nies.Hi,
Try out, in the below mentioned path.
SPRO>Production Planning for Process Industries>Process Order> System Modifications>Define System Message attributes.
Select System Messages--> Click on New Entries and mention your message number with application area.Maintain the message as error.
Just check whether you are able to make it an error.
But when I tried your scenario I got a different Message number BU011. -
Analogue of the adf.error.warn
Hi All,
Is there any analogue of the adf.error.warn, that used in groovy expression, but for calling from java validation method of EO, and with an opportunity to set custom message text(not message id)?
Thanks!I have solved my issue.
If you are interested, below the method in which a warning generated when checking the value of the field.
public boolean validateSal(oracle.jbo.domain.Number sal) {
if (sal.compareTo(10000) == 1){
AttrValException ex = new AttrValException( AttrValException.TYP_ENTITY_OBJECT
,"Salary is too big!!"
,null
,getDefinitionObject().getFullName()
,"Sal"
ex.setSeverity(JboException.SEVERITY_WARNING);
this.getDBTransaction().getRootApplicationModule().addWarning(ex);
return true;
} -
Is it possible to change warning "& is marked for deletion" to a hard error
As part of our periodic update of our bank directory in transaction BAUP, Bank Keys which are no longer valid are marked for deletion. We are not at the point where we are archiving records yet, so the actual deletion has not occurred in our system.
When an HR user updates a person's bank information (transaction PA20 or PA30, InfoType 09), if they enter one of these bank keys, they are given a warning that the bank key is marked for deletion. However, this is not a hard stop, only a warning message. As a result, they are able to save the record with an invalid bank key. The details indicate that this is message class F4, message 230. However, it appears from the IMG that it may be message 210. I have tried working with each of them.
I have attempted to change the message to a hard error in message control, but have not been able to do so. I receive an error telling me that "Message 230 (or 210) is not allowed". I have tried several application areas, including FV, Electronic Banking Messages.
Is there any way in configuration to change this to a hard error? If so, please supply details, including application area.
Also, are there risks of disruption of standard business processes if we do change this to a hard error? I know that this same message is issued for other master data elements which are marked for deletion such as GL accounts or Customer records,
Thank you.
I have searched forums with terms "marked for deletion" and "warning" but have not found an answer. I have also searched various outside expert forums on this topic. Everything I have seen seems to assume that this message will be a warning only.
Aoife B.
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PMIf particular message is not allowed in OBA5, then it is not configurable message. Neverthless if you like to change this message, you need to configure this in OBMSG first
-
Change warning msg to error msg.
well in material master i am getting a warning message Message no. MM071 i am change into error message.
regard
nabil
Edited by: sayednabil on Jun 18, 2010 8:14 AM>
sayednabil wrote:
> in sm30 when we enter the table V_160M, application area MM is not visible.so how to enter the message mm071.
>
> regard
> nabil
Go to SM30...enter the table V_160M...select Enter Condition....in the pop up don't maintain Control version,Application area,Message,Message Category and select the enter icon...further go for new entries as 00,MM,071,E...
Regards,
Indranil -
JDeveloper ADF Change title validation error messages
Im using JDeveloper 12c with ADF and i was wondering how can i change those titles.
What titles are you talking about and what do you want to change?
Timo -
User exit for change warning message to Error message in va01
hi,
I want to change a warning message to as a Error Message in VA01 t-code,
how can i proceed for this. where i need to change
( without changing standard code)
thanks in advance.*& Report ZUSEREXIT *
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
Change Warning to Error MSG in Sales Order for a KMAT
I'm using variant configuration with a business conector (WEB-->SAP) to create a Sales Order.
How can I change the message that appears when a material doesn´t can be adopted in the bill of materials because of the Distribution Channel status from warning to error? (Functional Area V2, N° Message: 003).
Or an alternative is about doing something that makes unable to save the Sales Order when a material can't be added (from the characteristics) because of the status.V2003 message is a hardcoded information message, not even a warning, just information with a recommendation in its long text, this message cannot be turned into an error message without modification.
-
Can we change warning message appearing in contract to error message
Hai Guys,
One of our clients' requirement is to make the warning message which appear as "Date 31.07.2011 is in the past
Message no. V1437" while giving a past date in valid from field of contract creation (VA41). I would like to know if there is any standard setting for this.
Thanks in advance
Sidhu
Edited by: Gino12 on Aug 2, 2011 4:51 PM
Edited by: Sidhu12 on Aug 2, 2011 4:51 PMHi,
Since this message begins with 'V1..', there is no standard way to change it. The only way to do so is:
Go to SE91
u2022 input V1 in Message Class
u2022 input 437 in Number and execute.
u2022 select the message number and click on "Where-Used List"
u2022 Only select 'programs'
u2022 Open the program
u2022 You can see the codings written for the error message as W437 which may be changed to E437.
This is not recommended by SAP -
Change warning message to info message
Hi experts,
How to change message no. VL248 from warning type to info type? It seems this message no. is NOT in OVM1.
Pls advise. Thx.Hi
When the warning message is thrown pls double click that message then you will get the message no like message class V1 no 023 like that
Note down that
In t code OVAH you can convert from warning to error of message classes V4 (all SD that is sales related messages)
In t code OVM1 you can convert from warning to error of message classes VL (all SD that is distribution related messages)
But your message class and message no should lie in the lists of messages given in these t codes
The messages in these t codes SAP has given for us for customizing that is mainly V4 and VL
Any thing other than these message classes like V1 etc has to done thro development only
This has to be done thro development only not possible thro customization
Go to SE91
1.Input the message class V1/VL
2..Input the message no say 061 in no and execute
3.select the message no and click on where used list (ctrlshiftF3)
4.select the box programming and deselect all others
5. Then a list of programs where this error message is used will appear
6.Double click description on the right side of your screen
7.Here you can see the codings written for this message 061 which can be changed to warning to error
Note
The best way to do it is with ABAPer only
Not recommended to change the standard settings
Regards
Raja -
MobileMe Address Book Sync - data change warning
I have used MobileMe for years and have always had the sync settings on automatic. Tonight I received the pop-up warning that over 5% of my address book information would be changed with the sync. In viewing the details, it appears that all the address book data labeled "child" on my hard drive is being changed to "brother/sister" from MobileMe.
Did Apple change something on their end with the fields in address book? or is this some conflict on my end?
Thanks in advance for any help/insight.I just developed this issue out of the blue. Some contacts duplicate, some don't. 2-6 copies of the ones that do duplicate. Strange.
-
Hi ,
There is fnd application table and the table populates the master record on a search. On clicking on delete, I have to raise the warning if there exists some condition on the detail of that master and user have to take the decision accordingly. I have used the applcore exception and set the type to be warning. It displays the warning, but it doesn't provide any option for the user to take the action, it just comes with the 'ok' button and more over , even though ok is clicked and set on save, the record is not getting deleted and the same warning keeps repeating. This is equivalent to raising exception.
Am I missing anything ? It will be great if anyone can throw some light on this.
Thanks & Regards,
priya.RSince the outside world is not exposed to fnd application table and applcore you should try posting this on the ADF Frontend forum.
As an alternative what you can do is to have a custom popup with an output text and a Ok button tied to a backingBean ActionListener which calls Save ... that will do the job easily :) -
KNotePrefCmdBoss and direct model change warning
Here is what I am doing to set some of the note settings...
InterfacePtr<ICommand> notePrefCmd(CmdUtils::CreateCommand(kNotePrefCmdBoss));
InterfacePtr<INotePrefCmdData> notePrefData(notePrefCmd, IID_INOTEPREFCMDDATA);
notePrefCmd->SetItemList(UIDList(::GetUIDRef(GetExecutionContextSession())));
notePrefData->Set(UIDRef::gNull, colorIndex, showTips, spellCheckNote, findReplaceNote, displayChoice, noteColorChoice);
notePrefCmd->SetUndoability(ICommand::kAutoUndo);
CmdUtils::ProcessCommand(notePrefCmd);
When I do this I get an assert warning that I'm making a direct model change. Why?Here is what I am doing to set some of the note settings...
InterfacePtr<ICommand> notePrefCmd(CmdUtils::CreateCommand(kNotePrefCmdBoss));
InterfacePtr<INotePrefCmdData> notePrefData(notePrefCmd, IID_INOTEPREFCMDDATA);
notePrefCmd->SetItemList(UIDList(::GetUIDRef(GetExecutionContextSession())));
notePrefData->Set(UIDRef::gNull, colorIndex, showTips, spellCheckNote, findReplaceNote, displayChoice, noteColorChoice);
notePrefCmd->SetUndoability(ICommand::kAutoUndo);
CmdUtils::ProcessCommand(notePrefCmd);
When I do this I get an assert warning that I'm making a direct model change. Why? -
Change of Warning Message to Error Message
Hi
I need to change warning message RP900 to an error message. could anyone tell me how to change the same.
thanks
SGHi Sri,
Yes it's a table which will be executed from the T-code: SM30.
Regards
Sheetal
Maybe you are looking for
-
I have FF5 on a portable device (a USB drive). I set up a sync account from that and have the code. I want to sync the FF on the USB with FF on the my various desktops, starting with my WIN 7 home desktop. On home DT, went to Options, Set up Sync, cl
-
Upgrade from ERP 6.0 with AFS 6.0 to ERP EHP4 - AFS 6.4
Dear all, I've upgraded our Solution Manager to latest maintenance (all latest release/all latest Sp/all Oss notes) I 'm unable to have a queue with EHP4 - Afs 6.4 from Solution Manager If I define a system as SAP ERP 6 with Afs, the sol. man. give m
-
[nVidia Series] P4N Diamond - RAID 5 plus two SATA DVD-RW setup
Can someone help with a good bios config to give RAID 5 across 3x 200GB and 2x Plextor SATA DVD-RW. I'm guessing the HDD's should be on SATA 1-3 and the DVD's on SATA 5-6, not too sure what to enable/disable in the bios. I have configured the HDD's a
-
Is anyone having problems with the "home" button not responding after upgrading to 5.1.1?
-
Hi I don't undestand completly the function of work management. I read de manual iut221 but the idea of the module isn't clear. Somebody help me to understand this module, with information of othe material. Thanks Horace Moderator note: OP notified o