ADF panel does not prompt for variable defined in ADF view object.

I have created an ADF Panel, which allows the user to run a few simple queries against an Oracle database done using ADF view objects and ADF view links and ADF application module.
One of these queries lookup detail information about a given database object (Table, view or whatever) from dba_objects. The SQL uses a parameter (:P_OBJ_NAME) that has a default value of “Departments”. If I run the ADF application module by itself outside of the ADF panel, all works fine, it prompts me to provide a value for the parameter :P_OBJ_NAME.
As I said the panel contains the different ADF view links including the one that should prompt the user to provide a value for :P_OBJ_NAME. When I run the panel it does not prompt me for :P_OBJ_NAME, it just uses the default defined value “departments”.
I hope I described my problem for every one to understand. The question obviously is how do I get the ADF panel to prompt the user to provide a value for parameter :P_OBJ_NAME, my expectation was that since the sql in the view object and the application module both are designed to prompt for a value for this parameter then the panel should do just that but it does not.
You expert input would be most appreciated.
Thanks.
Bobby A.
Edited by: Babak Akbari on Aug 13, 2009 8:34 AM
Edited by: Babak Akbari on Aug 13, 2009 11:12 AM

The prompting for a parameter is a feature we built into the ADF Tester - it is not a default behavior you get in your application when you just place a VO on your page.
To get something like this expend the operations node under the VO in the data control palette, and drag the "Execute with parameters" operation to your page to drop it as a parameter form.
This will provide your user a place to fill out the parameter and press a button to execute the query.

Similar Messages

OVM Server 2.1.2 does not prompt for Networking

OVM Server 2.1.2 does not prompt for a network setup (ie DHCP or static IPs).
- I tried re-installing this several times
This same machine works with native Enterprise Linux 5.2 x86-64 networking.
The motherboard has two onboard Realtek 8111C chips (10/100/1000 Mbit)
http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2842
Will setting up networking by hand work with OVM Server 2.1.2?

OK I finaly made my Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller to work.
First install an Ethernet card in your box that OVM supports. This to make the OVM installation run smoothly.
When OVM is up and running follow the steps in [Mini-HOWTO] RPMs needed to compile a kernel-module on / for VM Server to get a working environment to compile modules.
Now get the driver for the unsupported card from ftp://61.56.86.122/cn/nic/r8168-8.008.00.tar.bz2 .
Unpack the file by running;:
tar -jxvf r8168-8.008.00.tar.bz2
Now follow the steps in the included readme file to compile and install the driver.
After this I edited the file /etc/modules.conf and changed the line
alias eth0 xxx
to
alias eth0 r8168
I then turned of the machine and removed my temporary network card.
When booted I ran system-config-network to configure the network once more to the original values I entered when I installed.

Send to OneNote from Outlook does not prompt for location

Hello
Since the most recent update, the Send To OneNote feature in Outlook does not prompt for a location but seems to be defaulting to the same notebook each time - even if it is not the active notebook. I've tried repairing Office 365 but it did not work. Is
this a known issue?
Thank you
Simon

Hi,
Just checking in to see if the information was helpful. Please let us know if you would like further assistance.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Beware: icloud control panel DOES NOT WORK for icloud email

Opposing evidence is welcome. Please comment.
After dozens of hours, emails and chat sessions with both MS and Apple tech support (the latter escalated as high as it could go - "after this we have to refer you to engineering"), I was finally told by Apple Senior Advisor Ciara Ferguson that icloud control panel does not properly sync icloud mail with Outlook 365 (Outlook 2013). After several months of working on dual systems I discovered that many (but not all) changes to folder names and filing of emails in various folders made in Outlook were not reflected on icloud and vice versa. Ms. Ferguson has stated that icloud control panel "works better with calendar and contacts." Obviously, this non-committal statement is grossly insufficient. It either works or it doesn't. It doesn't.
Allegedly, icloud control panel does work to sync other email (the example of an outlook.com email address was given) into apple devices. This doesn't sound right to me either, since one can just add any POP or IMAP or Exchange account into a Mac device, so why would one need icloud control panel to interface?
I remain stymied as to the actual purpose of icloud control panel, despite asking exactly that question of Ms. Ferguson on several occasions. The Apple literature and its own setup screens suggest that it will sync email, contacts, calendar and notes with MS Outlook, but as to email, that is apparently untrue.

I don't think so. I'd like to sync photostream from two iPhones with distinct Apple IDs on our PCs and I don't see a way to do it. It synced my wife's iPhone while she was logged in to iCloud control panel but not mine until I logged in (and disconnected her photostream PC syncing).

Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre

Hi,
I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
setup did not prompt for any license key!
I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
Regards
Pierre
Is it a Chinese Editon preinstalled in HP notebook?
Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
http://whqlcn.wordpress.com

Report does not prompt for parameters when SeparatePages=False

Hi all. We are using CR2008 Basic w/SP1 along with VS2008. Within our application, reports pull up fine and prompt for parameters using the CrystalReportViewer against the web service. SeparatePages is set to True. We want to change SeparatePages to False, but when I do that any report that should prompt for parameters is not.
The reports were created in CR 8.5. We have upgraded them to CR2008 (open, refresh, save) which has greatly increased performance. With some further testing, I've discovered that if I take a report that doesn't currently have any parameters and add one via VS2008 report designer, it WILL prompt for the parameter when I run it in our application with SeparatePages=False.
So I'm leaning that the problem has to do with the reports originally being created in 8.5. I've tried modifying an existing report with parameters, deleting parameters and re-adding, but I still can't get these to prompt for parameters with SeparatePages=False.
Again, these same reports prompt for parms and work fine as long as SeparatePages=True. I'm hoping someone might be able to shed some light on this. There are over 400 reports so re-creating them from scratch under CR2008 will be a painful option
If I need to provide any additional information just let me know. Thank you!
Sheila

We are still working to resolve this issue. Testing has shown that for reports that don't return a lot of data, the prompt for parameters will display. But for larger reports, we just see the hour glass and the parameter prompt never displays. It's almost like the reports are trying to return the full dataset without any paramters being passed BEFORE it will prompt for parameters. This would explain why smaller reports will prompt and larger reports never will (?). Not sure that is what is happening. Again, with SeparatePages=True we are immediately given the parameter prompt. With SeparatePages=False we run into the issue of no prompts.
Here's the code behind if it help:
ReportDocument report = new ReportDocument();
try
    String rptFileName = @"App_Data\Reports\" + Request.QueryString.GetValues(0).GetValue(0).ToString();
    log.writeLog("Loading Report: " + rptFileName);
    String rptFile = Server.MapPath(rptFileName);
    report.Load(rptFile);
    report.Refresh();
    ConnectionInfo crConnectionInfo = new ConnectionInfo();
    log.writeDebugLog("ServerName : " + rProperties.ODBCSource);
    crConnectionInfo.ServerName = rProperties.ODBCSource;
    log.writeDebugLog("DatabaseName : " + rProperties.ODBCSource);
    crConnectionInfo.DatabaseName = rProperties.ODBCSource;
    log.writeDebugLog("UserID : " + rProperties.ODBCUser);
    crConnectionInfo.UserID = rProperties.ODBCUser;
    log.writeDebugLog("Password : " + rProperties.ODBCPassword);
    crConnectionInfo.Password = rProperties.ODBCPassword;
    foreach (CrystalDecisions.CrystalReports.Engine.Table table in report.Database.Tables)
        TableLogOnInfo crTableLogOnInfo = new TableLogOnInfo();
        crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
        table.ApplyLogOnInfo(crTableLogOnInfo);
catch (Exception err)
    log.writeLog("Error Loading Report: " + err.ToString());
    this.lblError.Text = err.ToString();
    this.ErrorTable.Visible = true;
    this.ReportTable.Visible = false;
    return;
CrystalReportViewer1.HasCrystalLogo = false;
CrystalReportViewer1.ReportSource = report; // _serverFileReport;

Adobe Creative Cloud Window Blank and Does not Prompt for Login?

I have three computers right now. One 2010 iMac, one 2012 Macbook Pro and a new 2014 Macbook pro. I have logged out and uninstalled creative cloud from the iMac. After buying the new MacBook Pro (2014) I have used the 2012 laptop to copy my entire user profile onto the newer laptop (including Adobe applications and creative cloud). However, when I try to open a Premiere project from the external drive I have been working off of, I get this message:
Adobe Application Manager is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Application manager from 'http://www.adobe.com/go/applicationmanager'.
When I go to that link, I get a prompt to download creative cloud (not application manager). I of course download Creative Cloud again and am given the steps to install but once the Creative Cloud installation progress bar finishes up and CC opens up, the window is blank and I am not asked to login or do anything. I cannot access any projects or login to my CC account on this new computer whatsoever.
I have deleted the opm.db file in the "OOBE" folder and I have restarted the application. I have uninstalled and reinstalled. I have restarted my computer. I have tried everything for the past few hours and have made absolutely no progress.
I am pretty stressed about this as the projects I have to work on are time sensitive. Any help would be greatly appreciated as customer chat support just left me on hold for close to an hour and I have not found a solution in the forums.
Thanks in advance.

Thanks John,
I actually found a post after another hour or so looking that pointed out the same potential problem that you did, but thank you for your help anyways.
I actually found some steps that someone had posted from their conversation with customer service. I've pasted it below. Hopefully it will help another lost and weary traveler as much as it did me.
8. Re: No Apps in Apps Tab
StarJockey Apr 7, 2014 6:40 PM (in response to StarJockey)
This worked for me. Thank you, Adobe!
Step 1:
Open Finder application.Click on Go>Go to Folder.
Type /library and press return key.
Then navigate to Application support/Adobe folder.
Right click on Adobe folder and select 'Get info'.
Under Sharing and permissions, click on Lock icon and enter
Administrator user name and password.Click on symbol, select Admini
strators and click on Add, then give 'Read and Write' permissions to Administrators.
Click on symbol again, select current logged in user name and click
on Add, then give 'Read and Write' permissions to Administrators.
Give 'Read and Write' permissions to Everyone, System, Admin, users.
Then click on Gear icon and select the option 'Apply to Enclosed items'.
Step 2:
Open Finder application.Click on Go>Go to Folder.
Type ~/library and press return key.
Then navigate to Application support/Adobe folder.
Please give full permission as mentioned above.
Step 3:
Open Finder application.Click on Go>Go to Folder>>Type /library and
press return key>>navigate to Application support/Adobe folder folder.
Locate the folder named AAMupdater and rename it to AAMupdaterold and
OOBE to OOBEold.
Step 4:
Open Finder application.Click on Go>Go to Folder>>Type ~/library and
press return key>>navigate to Application support/Adobe folder folder.
Locate the folder named AAMupdater and rename it to AAMupdaterold and
OOBE to OOBEold.
Once you are done with the above steps, you can try launching the
Creative Cloud desktop application.
If you still face the same issue, please try the next steps.
(These steps were not necessary for me.)
Step 5:
Click on the below link to download the cleaner tool.
http://download.macromedia.com/pub/creativecloud/cleanertool/mac/AdobeCr
eativeCloudCleanerTool.dmg
Select the product as Creative Cloud and CS6, then select Creative Cloud
desktop/Adobe application manager and select clean.
Step 6:
Once you are done with the above steps, login to
https://creative.adobe.com/products/creative-cloud and try downloading
the Creative Cloud desktop application.

Gnome screen lock does not prompt for password

Whenever I lock my screen under gnome, I am never prompted for password when unlocking.
Does anyone know how to solve this issue?

Do you have fprintd installed? I ask because I found the following openSUSE bug report: http://lists.opensuse.org/opensuse-bugs … 01518.html

SSH - Failure to connect, does not prompt for password,

I have been using SSH on this iMac with 10.5.4 for over a year, upgraded to Leopard when it came out, never a problem with SSH, but now for no apparent reason, SSH fails when trying to connect through VPN into work.
I can still connect to other systems on the internet that are not through the VPN.
I don't suspect this to be a VPN issue because no other employees are having this problem with the VPN, using Mac, Windows or Linux. I can connect vi putty on my windows from the same network... below is my config.
Here is what I'm getting:
I connect as- ssh me@hostname and it returns "Permission denied (publickey)." It makes to attempt to prompt me for a password. I do not use a key on this system so it should prompt me for a password. I changed nothing on the system to cause ssh to break, But it's possible that a apple security update caused something to break.
I have added the following to my ~/.ssh/config file
PasswordAuthentication yes
My /etc/ssh_config file is as follows:
cat /etc/ssh_config
# $OpenBSD: ssh_config,v 1.22 2006/05/29 12:56:33 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# GSSAPIKeyExchange no
# GSSAPITrustDNS no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
# Protocol 2,1
# Cipher 3des
# Ciphers aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
PermitLocalCommand yes
My /etc/sshd_config is:
cat /etc/sshd_config
# $OpenBSD: sshd_config,v 1.72 2005/07/25 11:59:40 markus Exp $
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options change a
# default value.
#Port 22
#Protocol 2,1
Protocol 2
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/sshhostkey
# HostKeys for protocol version 2
#HostKey /etc/sshhost_rsakey
#HostKey /etc/sshhost_dsakey
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 768
# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTHPRIV
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
#PermitRootLogin yes
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile .ssh/authorized_keys
# For this to work you will also need host keys in /etc/sshknownhosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# SACL options
#SACLSupport yes
# Change to no to disable s/key passwords
#ChallengeResponseAuthentication yes
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange yes
# GSSAPI options
#GSSAPIAuthentication yes
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication mechanism.
# Depending on your PAM configuration, this may bypass the setting of
# PasswordAuthentication, PermitEmptyPasswords, and
# "PermitRootLogin without-password". If you just want the PAM account and
# session checks to run without PAM authentication, then enable this but set
# ChallengeResponseAuthentication=no
#UsePAM yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
# no default banner path
#Banner /some/path
# override default of no subsystems
Subsystem sftp /usr/libexec/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server

Also I forgot to mention, I have nulled out the known_hosts file to eliminate any conflicts there, I have verified .ssh is 700 and files config and known_hosts are 600
output using ssh -v
debug1: Reading configuration data /Users/<me>/.ssh/config
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to pshx4105a [216.255.177.213] port 22.
debug1: Connection established.
debug1: identity file /Users/<me>/.ssh/identity type -1
debug1: identity file /Users/<me>/.ssh/id_rsa type -1
debug1: identity file /Users/<me>/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.5p1 FreeBSD-20061110
debug1: match: OpenSSH_4.5p1 FreeBSD-20061110 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.7
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host 'pshx4105a' is known and matches the DSA host key.
debug1: Found key in /Users/<me>/.ssh/known_hosts:3
debug1: sshdssverify: signature correct
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug1: SSH2MSG_SERVICEACCEPT received
debug1: Authentications that can continue: publickey
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/<me>/.ssh/identity
debug1: Trying private key: /Users/<me>/.ssh/id_rsa
debug1: Trying private key: /Users/<me>/.ssh/id_dsa
debug1: No more authentication methods to try.

After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it. Maybe client integration or authentication settings? I have looked at it in wireshark
and have not seen anything glaring.
Steps to reproduce the (working) behavior:
Set up a document library in SharePoint 2010.
Under versioning settings, make the following changes:
Set Require Content Approval for submitted Items to Yes
Select Create Major and Minor (draft) versions
Set require checkout to Yes
Create an out of the box “approval” workflow with the following settings:
Start this workflow to approve publishing a major version of an item.
I then create a new document. Save it. check it in. it is now version 0.1.
I then open it again. check it out. Make a change. Close and save it.
Check it in.
Publish major version:
At this point a screen is presented to me to enter workflow parameters. This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
This is what I need help with. It should come up in 2010. To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port. I did this for 2010 and it did not work.
Any help or ideas is very appreciated. Thanks very much in advance.

Hi Chris,
According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
Thanks
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Infoview not prompting for parameters

Hi all,
quite basic question but I have spent hours on this now so decided to ask.
I have a Crystal report based on BW query which has date range as mandatory variable.
How do I control whether the Crystal report promts for that variable or not when opening. When I open the Crystal Report from INfoview it does not prompt for this parameter, although it did so previously.
Is the setting with the paramter in the CR or with report options?
thanks

Hi,
can you please check if the option Save data with the report is selected? You will find this under the File menu in the CR designer. If the option is selected then the report will not try to fetch data from the database when opened and therefore will not prompt you for the date variable. In this case you will have to refresh the report explicitely in the InfoView
Regards,
Stratos

System copy in EP does not ask for Traget Database

Hi,We want to migrate our Enterprise Portal Oracle Database to DB2.
While taking a system copy ,it does not prompt for Traget system atall.
We have successfully migrated ECC and BI Databases where it asked target DB but here it does not prompt,what could be the issue?
Several versions of SWPM are tried but not able to identify the issue.
Has anyone faced such error?
Please advice..

Hi,
For Java system copy, an export of the system has to be created. Are you able to create the export via the Installation Master or SWPM? Please also mention the Netweaver version of the Enterprise Portal.
Regards,
Srikishan

HT1595 Will not prompt for new password, if invalid password was entered

Will not prompt for a new password after an invalid password was entered

I am installing a Apple TV, when I select my router from the list it prompted me for the password. I entered an old password in error, so it would not connect. Now when I reselect my router it does not prompt for a new password, it uses the old incorrect one and does not connect. I need to be able to re-enter the correct one.

I can no longer see my attached mail as word, excel or PowerPoint for it does not prompt me to download

IPad Air 2
version 8.3
i can no longer see my attached mail as word, excel or PowerPoint for it does not prompt me to download

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

ADF panel does not prompt for variable defined in ADF view object.

Similar Messages

Maybe you are looking for