Adhoc query for Off cycle Payments(infotype 0267)

Dear All,
I have a rquirement to create a query for off cycle payments infotype(0267).
It should show the payment done for each wage type.
Can we pick the data from PC_payresult from table RT - Results Table.
If yes, please let me know the process and if not, is there any other way to get the splits of offcycle payment.
Regards,
Prasad.

Hi All,
Do any one know how to create this query?
Do we have any standard reports regarding the splits of offcycle payment infotype(0267)..
Regards,
Prasad.

Similar Messages

ABAP programing for off-cycle payment for bonus

Hi Guru's
I have to develop a ABAP program for Off-cycle payment bonus,
I am new, any one can help me in this.

Hai,
Please refer to the given below link:
back payment for off-cycle bonus

Income Tax in Off cycle payments

Hi Folks,
Please provide u r inputs for the following conditions
1.I don't want Income tax deduction for Off cycle payments, if i comment INBTD function and run the Off cycle payment, will the off cycle amount will be considered for Taxation in the subsequent month Regular Payroll.
2. Is it possible to make custom IT deduction in Off cycle payments, i.e the actual IT deduction for Bonus is Rs.1000, but i want to overwrite it by 1500 rsthru INVT rule. Is it possible -how?
3.Is it possible to make deductions in offcycel, if so how?
Regards,
Sekar

1.I don't want Income tax deduction for Off cycle payments, if i comment INBTD function and run the Off cycle payment, will the off cycle amount will be considered for Taxation in the subsequent month Regular Payroll.
If you comment taxation of off-cylce in standard SAP schema for the country, then you have to manually add this WT for taxation during regular processing.
2. Is it possible to make custom IT deduction in Off cycle payments, i.e the actual IT deduction for Bonus is Rs.1000, but i want to overwrite it by 1500 rsthru INVT rule. Is it possible -how?
Of course it is possible, but not recommended (as to change any standard IT/SI logic). You have to disable standard taxation and add deduction as you wish in payroll schema for off-cycle.
3.Is it possible to make deductions in offcycel, if so how?
Yes it is possible to add deduction in the schema for off-cycle.

Default payment method issue in Additional Off-Cycle Payments

Hello everyone,
I have an issue with Additional Off-Cycle Payments and running this in payroll driver.
I have maintained V_T52OCB or "Define default values for payment methods" in IMG as Check (C) but when I run payroll for this employee I see that payroll driver is considering Infotype 0009 which is a direct deposit but when I run the same employee in OFF-CYCLE Workbench I see that the run is defaulted to Check and is not considering Infotype 0009 which is correct.
What I don't understand is the same record when processed through regular payroll driver (RPCALC) is considering Infotype 0009 but Off-cycle is considering default payment method for Off-Cycle defined in IMG.
Has anyone seen this kind of issue?
Thanks,
Hemanth.

Hello Hemanth,
The value you maintain in V_T52OCB is only for defaulting the Payment type in Offcycle Workbench Screen for the Reason you have choosen for the offcycle, it doesn't mean it would be run only by that payment type and you can overrite in offcycle workbench itself by choosing the other payment type.
For Offcycle run it always with the value entered in IT 0009, For off-cycle, if there is a valid record with subtype 5/6, it will be used otherwise subtype 0/1 will be used if payment method selected is according to IT.
If payment method is not according to IT a new record will be created in IT 0009 for the exact date.
For Manual check, the check number can be entered in Offcycle workbench.
I hope it clarified your doubt.
With Regards,
S.Karthik

Off cycle payment is not getting updated in RT

Hi Folks,
we have an issue with off cycle payment, when we run LTA Payment to the employee, we are creating LTA wage type and amount in IT0267. As we run off cycle payroll, off cycle payrol is run with out the amount. It is not picking the amount and not showing the amount in the RT. Moreover when create LTA in IT0267 it is showing "I" IN DIRECT VALUATION. amount is not at all getting picked in RT. Please share ur inputs on this. It is happening for few empployees under one payroll area.
Thanks and regards,
Samba.

Hi All,
Problem has been resolved, it seems, P0267 does not read if an amount is being populated through Indirect valuation. For LTA there was indirect valuation, in table t539j. Now when we go to IT0267 to create LTA the amount is being populated automatically.
Now to rectify the issue, we have entered the same amount manually in the IT0267and saved the record. then LTA is not getting saved with Indirect valuation symbol. that is how the issue has been resolved. Now the RT is reading the amount.
Thanks and regards,
Samba.

Adhoc query for Training & Event mgmt

Hi,
Can anybody guide me for design the adhoc query for training & event management. I needto extract data upto attende level from a particular infoset.
Thanks
Dadarao.

Hi,
I have got a query in AD-HOC query.
After creating the Adhoc query using the join table functionality the resulting adhoc query does not results any out put.
What I have done is :
1.Created a user group through SQ03
2.Attched user to My user group
3.Created an infoset using join table functionality(SQ02).
4.Saved and generated the infoset
5.Added the user group to the infoset and than run the ADHOC query.
The table I have used to join is all PA table (For test pupose)
Though the purpose of the custom infoset is to join PA,OM and E rec infotypes, for testing purpose I have joined only PA infotypes.
Result:The adhoc query does not gives any out put instead it says no data could be read.
Could you please tell what else I need to do so that the custom infosets gives an out put.
Will greatly appreciate your help.
Thanks and best regards
Rajeev

Adhoc query for IT0041

I was told that it is possible to create a separate 'Date for Date Type' for each 'Date Type' in the selection criteria of an adhoc query for IT0041. Can somebody help me with this please?

Hi Sven
Thanks.
I created it with PCH , but very few fields are visible for IT1001
Hence if I want to find chief of Org unit A, then I cannot find it as 'Relationship type/relationship' field of IT1001 is missing here.
Basically I need all the fields which are displayed in IT1001 as shown below:
Need your help to find the way out. Thanks
KP

Adhoc query for HR.

Good Morning
I am creating a adhoc query for HR.
I create an Infoset in the T.Code SQ02, I am using the database PNP , add code abap for get data of other table in the field additional ZKTEXT in the the code section record processing.
In the moment of Generate the infoset, the system display the following message of warning
Additional Fields
**No code exists for additional field ZKTEXT,
However the adhoc query work fine and get the data of the field ZKTEXT.
1. The question is, There is some form in where the system no display this message of warning in the moment of generate the infoset?
2. In this moment the field ZKTEXT is as a field of output in the Adhoc Query , But There is some form in where el field ZKTEXT. is as field of selection. ?
Regards.
sanew2

*$HR$ [COMMON].
*$HR$ PERSON_ONLY_ONCE = 'X'
Regards

Adhoc Query for Qualifications.

Hi Guys.
Can some body help me creating an Adhoc Query for the active employees whose Qualifications along with there Name reflects, can somebody guide me in this regard.
Regards,
Venkat.

Hi Venky,
You can pull the qualification details using SAP quick viewer (Tcode SQVI) and using logical database PNP
-> Go to Tcode SQVI
-> give Query name and Create
-> In the data source field, select Logical database
-> In logical database give PNP or PNPCE
-> Then in basis mode u can find IT 0024 in Planning data header
-> and then select the list fields u need and the additional selection criteria also
-> Then execute the query.
With smile,
Venkatesh kumar

Adhoc query for OM infotypes

Hi Experts,
We have an adhoc query based on PNP logical database. But client wants to access OM infotypes data using that query. Can you guide me how we can do that?
Thanks and Regards,
Ashish.

If you are looking to add few fields, you can create custom fields in function group and write code for them . You can create the custom fields by following steps.
Go to t-code SQ02
Give your infoset name go to change ->
Click on "EXTRAS"
Click "Paper u201CCreate " Pop-up will appear
-Choose "Additional field" name as Zamnt1
Give long text & header
Like reference as u201Cpa0008-BET02u201D
Code in screen u201Csave it"
Go back to fields group and assign additional fields to your Fields group.
Donu2019t forget to generate. You can create as many as fields this way.
FYI https://forums.sdn.sap.com/click.jspa?searchID=14569976&messageID=5750674
http://jelajahsap.files.wordpress.com/2008/01/abap-query.pdf
Thanks,
Khan

Income tax on off-cycle payment

hi all,
I m new to HCM , i have a query that if i want to calculate the income tax on the off-cycle (bonus) payment for that perticular one month not for the avg. of year , then what should be the changes i need to do and where..?? bcoz now its giving me the income tax for the whole year not for that perticular payment..
thanks in advance..

The Tax caluculation will taken care by the Funtion INBTD Kindly Check that one
and The tax is caluculated on the total gross payment includeing bonus amount
For information
Go to PE01 Give IN00 Schema in that go to INN1 Sub Schema in that Select INBTD press F1 you will get informatiion on the bonus
and tax code we assign in the table V_T7INT9
try to give bonus for one period execute the pay roll and run the regualr pay roll for the next month and try to check the income tax caluculation along with the Gross Salary in Form 16

Query for A/R payment details

I would like to query the business one database for all of the payment details (what invoice(s)...) were paid on a specific check. It would sound something like this:
I can't seem to find the tables involved.
select (all detail records where payment applied) where check number = 'X'
I can find the check number and amount, but can not find how it is linked to invoices and/or credit memos.
Thanks in advance, Sam

The tables that may want to query are ORCT, RCT1 and RCT2.
See the SQL example below
SELECT T1.[DocNum] AS 'Payment Number', T1.[DocDate] AS 'Payment Date',
T0.[CheckNum] AS 'Check Number', T0.[CheckSum] AS 'Check Amount',
T0.[BankCode] AS 'Account No.', T3.[DocNum] AS 'Invoice No', T2.[SumApplied] AS 'Paid to Invoice'
FROM [dbo].[RCT1] T0 INNER JOIN [dbo].[ORCT] T1 ON T1.[DocNum] = T0.DocNum
INNER JOIN [dbo].[RCT2] T2 ON T2.[DocNum] = T1.DocNum
INNER JOIN [dbo].[OINV] T3 ON T3.DocEntry = T2.DocEntry
Suda

Query for what incoming payments are linked to a/r downpayment invoices

Dear all,
Please advice on what query will give me the incoming payments linked to A/R Downpayment invoices in SAP business one 2005 pl 50
Kind Regards,
Monil

Thanks Gordon,
Please advice on which tables do I refer to?
Monil

Query for checking overdue payments and trigger approval process

Hi All
I need a query to be executed when a user is tries to add a AR Delivery Document for a customer with invoices that have overdue DocDueDates.
Regards
Bongani

You probably want to check overdue dates against closed and canceled items, too:
(This allows a zero dollar document to go through, for repairs or replacements)
SELECT DISTINCT 'TRUE' FROM DBO.OINV T0
WHERE T0.[DocStatus] = N'O' AND T0.[CANCELED] = N'N' AND ($[$22.0.Number]) > 0
AND T0.CardCode = ($[$4.0.0]) AND T0.[DocDueDate] < GETDATE()

OFF Cycle Payroll (0267 Infotype)

Dear Experts
How to run off cycle payroll for group of employees
if i run off cycle using standard code PC00_M99_CALC for KSA , System not not processing the 0267 which trigger processing error Determine recurring payments/deductions for period from 1432/12/21 to 1432/12/21
Note : maintained infotype 0267 properlly which is available in p0267
Kindly advice me how to run offcycle for all employee at a time
Thanks
Thiu

Hi,
For Off cycle payroll required
1. Payroll area should be in Exit mode of Last pay period.( If you are running no of payroll areas check with all payroll areas and select all payroll areas in selction mode)
1. Payroll reason (in IT0267 should be maintained)
2. Payroll type, Payroll Identifier (based on business process) Date of off cycle run.
When your excute the payroll it will take all the employees in particular date only.
Note: If you are the End user feel free contact the payroll consultant or Refer the End user document.

Adhoc query for Off cycle Payments(infotype 0267)

Similar Messages

Maybe you are looking for