AdHoc Query - possible to choose text and value for a field

Hi
One of our infosets is based on the LDB for travel (PTRVP).
For this infoset, PERNR is delivered from P0001.
However, this field does not deliver a text, so the user cannot choose "value and text" as they can for PERNR in the LDB PNPCE. The only difference seems to be that PNPCE fetches PERNR from P0000.
Can anyone tell me how to provide text options for the field?
I have tried the method described in IMG with no luck (probably doing something wrong).
Should mention that I am no expert programmer.
Thanks
Kirsten

The Text in PERNR is just the Employee Name (ename). The users can get that from IT0002 anyways. They can choose Last name, First name or ename.
Sanghamitra

Similar Messages

Pie chart with both text and value

Hi,
I want the pie chart to contain both the text and value how is this possible when I look at the optiond for chart I was able to select only one thing at a time both not both the things at a time ,please let me know how is this possible
Thanks
Priya

Hi Priya,
this should be possible. In the Chart Designer in the properties of the Categories you must edit the Format string to e.g. "$Label$br0.00" (show the label, make a line break, show the value with 2 decimals). For more info regarding the format string see note <a href="http://service.sap.com/sap/support/notes/1064448">1064448</a>.
Best regards
Matthias

Can we have the text and value displayed in the BI Graph ?

Dear Experts,
We are able to see the graph for a particular report in switching to Graphical Display
:I have selected Pie chart and the value and text is displayed on mouse over on each section.
Please let meknow if there ia an option to display the text and value along with the graph.
Regards
Manu

Manu Govind wrote:
Dear Experts,
>
> We are able to see the graph for a particular report in switching to Graphical Display
>
> :I have selected Pie chart and the value and text is displayed on mouse over on each section.
>
> Please let meknow if there ia an option to display the text and value along with the graph.
>
>
>
> Regards
> Manu
Dear Govind,
You can use BEx based WAD tool to acheive it. Edit the chart in the chart properties dialog, goto settings & edit the property. As you have requested you created 2 tabs, one for chart, another for data, and as and when you do changes in the Analysis grid, the chart values get adjusted.
P.S. Humbly a personal opinion; I do not recommend WAD; use XCELCIUS instead.
Best Regards, @{

Query to get parameter name and value after ran the conccurent program

Hi All,
Query to get the parameter name and value for completed concurrent program using the request id. can any one help me in this regard.
Thanks,
Red.

Red,
I have tried the same query and it works properly here.
I have submitted "Purge Signon Audit data" concurrent program with "Audit Date" parameter set to 01-06-2009, and here is the query output:
SQL> select request_id, phase_code, status_code,
argument_text, argument1
from fnd_concurrent_requests
where request_id = '739664';
REQUEST_ID P S ARGUMENT_TEXT ARGUMENT1
739664 C C 2009/06/01 00:00:00 2009/06/01 00:00:00Regards,
Hussein

How to display texts automatic. besides entered value for a field in Trans.

How to display texts automatically besides the entered value for a field in a standard transaction screen. For example you have a value table and a text table associated to it. Then on entering the value field and pressing enter the text associated should get displayed immediately besides the value. Like if you have 'LOC' as the value and 'Location' as the text associated to it, on entering this value 'LOC', you automatically get the text 'Location' printed besides it automatically in a transaction screen ?
Message was edited by: Sarika Kedia

Hi sarika,
Welcome to SDN.
1. first of all, such display of text,
   is not automatic.
   (it appears to be automatic)
2. At design time,
   a) take one extra field for text
     and mark it as OUTPUT ONLY
3. Then in PBO coding,
    call some module, and in that module
    write code
4. The code should be to
   select from TEXT Table
   into the work area.
EG. THE SCREEN TEXT FIELD NAME IS
T510A-FIELDNAME.
CLEAR t510a.
SELECT SINGLE * FROM t510a INTO t510a
WHERE trfar = FIELVALUE.
5. This will take care of
   displaying the text value of that field.
regards,
amit m.

How To Find Opening Stock And Value For a Material

Hi Experts,
How To Find Opening Stock And Value For a Material in Given Dates
Moderator Message: Search.
Edited by: kishan P on Sep 15, 2010 4:05 PM

Thanks For Answering.....
But I Need Any Function Module To Get Opening Stock And Value For Given Material With in Dates.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

System generated value for a field and incrementing (using module pool pro)

Hi,
I'm getting system generated value for a field and incrementing (i.e done by coding) when i'm saving the screen or transaction (which is created using module pool programming) while modifying, saving its working fine, but when i'm going out of the screen or exit n again i start the screen (with some ztransco) the value for the field again starting from 0 so i want to start from the same value for a field where we exit or got out from the screen n incremented respectively while saving the screen,
Thanks & Regards,
MS
Edited by: Rob Burbank on May 4, 2010 10:40 AM

Search the forum for number range objects.
Rob

Is there a mobile device for just text and games for a child?

is there a mobile device for just text and games for a child?

iPod touch? That's the only "iPod" that can play games (run apps). It connects to the Internet over WiFi (not mobile carrier). It's basically an iPhone without the phone parts. If you get a used one, earlier models cannot run all the software available to the latest model (include the latest version of iOS). That may be perfectly OK for a child, but you should look into and understand the imitations of older models, before getting one used or refurbished. Apple-certified refurb iPod touch is available here
http://store.apple.com/us/browse/home/specialdeals/ipod
(The current version of iPod touch is 5th gen.)

Negative values for Custom field in SAP coding block !

Hi All,
Hope all of you are doing fine.
I need your valuable suggestion/possible workaround for the following requirement.
u2022 The project requires me to add a custom new field to SAP coding block, which can take negative numeric values.
u2022 The standard u201Caddition of custom fieldu201D configuration allows me to have the data type of the newly added custom field as either NUMC or CHAR. NUMC data type does not allow negative values. Standard configuration does not allow me to choose other data types (for custom field addition) like QUAN which can allow negative values (by checking the Sign at domain level in data type).
u2022 Moreover, once I have added the custom field, itu2019s not possible to change the data type of the newly added field (say from NUMC to QUAN).
I wanted to know if anyone of you have any project experience/knowledge about possible workaround, where we can add a custom field in SAP coding block, which can accept negative numeric values (through standard configuration or otherwise).

No experience on that, but I strongly advise you to not trying to do something else than what was designed by SAP. So, you can create a character type field, with for example a field exit (though this technology is obsolete, it's very useful in that case) to validate its content (and reformat it if needed).
Note that from a functional perspective, I think an amount is strange in the coding block, so maybe ask the functional people to know why they need it...

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

HOW TO SET A DEAFULT VALUE FOR A FIELD?

hi friends
i have doubt..how to set a default value for a field..say like in local printer field i always want lp01 to be displayed defaultly..when i click F1 in that field i get the parameter id ..i know there is something dealt with that parameter id..how can i set that default value ..in the case of the default printer value i made in own data settings as lp01 but how to do it normally for other field which has parameter id ??????
thanks and regards
prince

Hi Prince,
u can set the default value in abap as given below
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN SKIP 1.
PARAMETERS : S_BUKRS TYPE BSID-BUKRS OBLIGATORY DEFAULT '1000'.
PARAMETERS : S_BELNR TYPE BELNR_D OBLIGATORY DEFAULT '1600000070'.
PARAMETERS : S_GJAHR TYPE GJAHR OBLIGATORY DEFAULT '2008'.
PARAMETERS : ASON TYPE BUDAT OBLIGATORY DEFAULT SY-DATUM.
PARAMETERS : S_KUNNR TYPE KUNNR MODIF ID GP1.
PARAMETERS : S_LIFNR TYPE LIFNR MODIF ID GP2.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN : END OF BLOCK B1.
or
u can give the default value in INITIALIZATION also.
vlue = '1000'.

Find the key for join between table "crhd" and "equi" for use field "answt"

I make program for read data from table "crhd" for print about machine report
but I can not find the key for link join to table "equi" for print field "answt" (acquistion value)
please help me find the key field for join between table "crhd" and "equi" for use field "answt"
thank you very much...

This is how the Work Center is linked to a particular Equipment -
Functional - In IE03 ( view Equipments) You see the Work Center of a particular Equipment.
Technical - Go to view V_EQUI ( view of EQUI and EQUZ). Pass the Equipment number alongwith V_EQUI-PM_OBJTY = 'A' ( i,.e searching for the Object Type Work Center). In this way u ll get the V_EQUI-GEWRK - this is the Work Center ID.
You can pass this Work Center ID to CRHD. And you will get the Work Center text.
CRHD-OBJTY = 'A'
CRHD-OBJID = V_EQUI-GEWRK.
and u ll get the CRHD-ARBPL - this is the Work Center.
So u need to come backwards, alongwith ur CRHD-OBJTY and CRHD-OBJID , you pass the same to V_EQUI and u get the list of equipment numbers alongwith ur ANSWT(Acquisition value).
I guess it solves ur problem.

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

Default value for a field in Purchase order

I want that while creating purchase order system should suggest one value for the field ' prior vendor ' in retail tab. I don't want to use user exit. Can anybody help?

Hi,
if that button is clicked then give the values in the work area of table control and then append it to the table control
in pai of the screen.
if r_rad eq 'X'.
fs_tab = ur value.
append fs_tab to it_tab.
endif.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:39 PM

AdHoc Query - possible to choose text and value for a field

Similar Messages

Maybe you are looking for