Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

Similar Messages

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Setting default value for form field assoc with a table column

On a "Create Record" situation I was trying to set the default values of some form fields using a page level "Process". These form fields have Source Type = Database Column. It wasn't working, I could only set non-db assoc form field values no matter when the "Process" was set to exec. From some other posts it seems that this is by design, ie. not being able to programatically set the initial values of form fields that are sourced to db columns. I was hoping to have just one "Process" that would exec to set these initial values in one place rather than scattered about for each field that needed a default value. These particular default values come from ref tables and may be different for each user.
So, it looks like I have to use a "Default Value" plsql chunk for each field on the form itself or else set their value on the calling form's Redirect in the "Set these Items" area.
Is this correct?

You could define a database function which accepts the name of the item and the user ID of the user running the application. Based on the item name and the user ID have the function return the appropriate initial value. Invoke this function in a "Default Value" PL/SQL block.
Does that help in centralizing your initial values? You could have one function per page or one function per application. I would do one function per application.

Setting Default values in the Field

Hi all,
In Purchase order document i want to display 99999 number in the quantity field as soon as i purchase order document is opened.
can you please guide me how to do this through stored procedures...?
Regards,
Chetan

Hi Chetan,
You can create Formatted Search. Simply use this query,
SELECT 99999 as Quantity
and assign the query to the Formatted Search.
Hope it helps.
Cheers,
Marini

Setting default values for item in opportunity mgmt(crmd_bus2000111)

Hi All,
I need to set default values for the field Fiscal Quarter in item level using BADI CRM_CUSTOMER_I_BADI .This Field is created using EEW. The default value is like if the date is nov-2007 the value for this fiscal period is FQ4-2007 .
Any clue would be great help..

Why don't you try setting the default value in the List next to the Matrix - item 107
Item 107 is a matrix (a transposed one), I have no idea what list you mean... I am using item 107, not 112. Item 112 is used only to detect a click on the "Add Record" button, which is the last row of the matrix 112.
I don't see the gender column in the grid and I'm also unsure of the id you have for it "12" - are you sure it's correct ( i usually use Item("columnName") )?
Sorry for the confusion. "12" is the name of the standard column "Password" which we have renamed to store the gender.
Anton

How to set a default value for particular field in SRM PO Portal

Dear Gurus,
Im desparetly need a help in web dynpro on how to set a default value for a field(flag) in PO header tab in portal.
My requirement is whenever the user press the edit button in PO screen,automatically a flag field should be set as abap_false.
I dont think this will handle in check badi or change badi. i tried this part in onbuttonpressed overwriteexit in CNR_VIEW views,i can get the function EDIT in debugging mode,but dont know how to proceed further.....
Many of them suggested to go with get attribute and set attribute for changing any particular field in web dynpro,but im not very familiar in using those get and set attributes.I request you people can give me sample code on how to identify my target field in the node and set the values while pressing EDIT Button.
Thanks in advance...
Regards,
Sathish

Dear Laurent,
Thanks for your response,
But i searched in enhancement spot of WD_BADI, but couldnt get the exact way to change the coding,
My real requirement is, that particular flag should be enable and disable dynamically by checking a condition in my header values.So in that case i dont know how to proceed further to handle in the PO screen.
Kinly guide me how to get the particular node of field in the Purchase order screen.
Thanks you in advance,
Sorry for the inconvenience if any
Regards,
sathish

URM How to set default value in the "New Check-in" - "Folder" field

Hello everyone,
I'm trying to find out how to set the default value for the "folder" field in a check-in profile created using the Configuration Manager. If I browse to the folder in the "Browse Content -> Folders" menu and check-in a file inside the folder, it will fill this field automatically. I need to replicate this behavior using the "New Check-in" drop-down menu and selecting a profile, in other words, associate a Folder with a check-in profile.
I know it was possible to do so in previous versions using the folders_g component, but I'm unable to figure out how to accomplish it with the new FrameworkFolders component.
Any help is greatly appreciated.
Thank you.

Hello,
It is working fine try this.
PARAMETERS :
y_p_list TYPE char32 AS LISTBOX VISIBLE LENGTH 22
                              MODIF ID rsg. .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR y_p_list.
MOVE: text-200 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-203 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-210 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-211 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-204 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-205 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-206 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-207 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-208 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'FIELD'
      dynpprog        = sy-repid
      stepl           = 1
      value           = ' '
      value_org       = 'S'
      display         = ' '
    TABLES
      value_tab       = y_i_listbox[]
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
REFRESH y_i_listbox.

Badi for setting default values in the transaction in APO.

BADI NAME: SMOD_APOCF005 which is used for setting default values in the transaction.
I have implemented the BADI using the below code but that BADI is not triggering. Please can you provide any solution for resolving this.
As per my requirement I am trying to set default values for these three fields RRP_TYPE, WHATBOM, CONVH.
DATA: LS_MATLOC LIKE LINE OF IT_MATLOC.
LOOP AT IT_MATLOC INTO LS_MATLOC.
LS_MATLOC-RRP_TYPE = '4'.
LS_MATLOC-WHATBOM = '5'.
LS_MATLOC-CONVH = '999'.
MODIFY TABLE IT_MATLOC FROM LS_MATLOC TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.
DATA: LS_MATLOCX LIKE LINE OF IT_MATLOCX.
LOOP AT IT_MATLOCX INTO LS_MATLOCX.
LS_MATLOCX-RRP_TYPE = 'X'.
LS_MATLOCX-WHATBOM = 'X'.
LS_MATLOCX-CONVH = 'X'.
MODIFY TABLE IT_MATLOCX FROM LS_MATLOCX TRANSPORTING RRP_TYPE WHATBOM CONVH.
ENDLOOP.

The BADI name: SMOD_APOCF005 .
T.code at APO : /sapapo/mat1
Once we enter in that T.Code with some Product and Location data.
There under PP/DS tab.
Under Planning Procedure there is a field PP Plng Procedure which I want to set as 4
And under Order Creation there is Plan Explosion which needs to be set as 5
And Under Horizons there is PP/DS Horizon which needs to be set as 999.
BADi is implemented and active.
And once the data is CIF from ECC to APO
These default values are not set in the T code in APO and the BADi is not triggering.

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to set the default values of the field of the context.

Hi Experts ,
I want to set the default value of the field of the context.
Where and how this declaration should be done.
Thanks in Advance.

In the context tab of the view. Select the attribute for which you want to set the default value.it will show the properties at the bottom. set the Default value property to the value which you want to set as the default value.
Regards
Naresh

Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

Urgent -Need to Add new values for the LOV field in forms

HI,
I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
Please Can some one help me in doing this?
Thanks
Suresh P

Go to Navigator and edit the LOV or create a new one.
hope that helps!

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

How to set default value to input field

Hi Experts,
I need to set default value to one input field for the transaction crmd_order as a screen variant. Guide me in doing that.
Regards,
Harish

Using the transaction SHD0, you can define the screen variant. While defining the sceen variant, you are allowed to define the default values.
Using screen variant, for the main transactoin, you can also define the transaction variant and you can use this as an independent transaction.

Need to set default values for the fields plant and location in ME21N

Similar Messages

Maybe you are looking for