Adjustable footer in Adobe forms

Hi Gurus
Need your help in adobe forms. I am converting the sap-script debit note to adobe forms. my problem is after the line item display the subtotal total and signature should come after with the line items. what i did right now is that the subtotal, total and signature is stable in the footer area which is wrong. what i want is adjustable. like example if i have 2 line items the footer should be in the middle part then if example 10 items in footer in lower part. It depends on how many is the line items.
line 1
line 2
liine 3
                   Subtotal
                    total
                    Signature
line 1
line 2
line 3
                   Subtotal --> should be like this
                    total
                    Signature
thanks in advance,
Edited by: Etrafanob on Nov 11, 2009 10:52 PM

Hi Sandra,
sorry for that and the late reply. here is the feedback for the benefit of the other. I apply what the replies stated. and to make the footer adjustable it should be put in a WRAP SUBFORM by right clicking the nodes in heirarchy view then in the object pallete there is a option for FLOWED/POSTION then it works for FLOWED. thanks.
best regards to all.
Etrafanob.

Similar Messages

  • How to align footer in Adobe form

    Hi experts,
        I required your urgent help for my development. I made a adobe form for customer ledger. Form is divided in 3 parts as shown in below image:
    Header sub form will print on each page if form is more than one page. Then Body will grow to multiple page according data. Next is footer, it will print on last page (either last page is 1st or 4th page) positioned bottom. The problem is that in some situation. Like it prints Header, then prints body sub-form for open item. It grow according data. suppose that open item end on second page then footer should be placed on second page at bottom aligned. Footer sub-form is 2 inches( or 10-12 rows) in height. It should be checked that after end of body subform how much space is available. if there enough space for footer to be print then footer will print on same page other wise it will create one more page, at top of that page will print header sub-form and then at bottom aligned footer sub-form (there would be blank space between header and footer).
      How to do that. Your help would be appreciate.
    Please reply asap.
    Thanks and Regards
    Piyush Kumar

    Hello Experts,
    I am describing it little more.
    Table will auto increas row depending on data. We can not fix it's row. Second thing if table have only 2 records then footer will place just below table end. It will not align footer at bottom Margin.So there would be space between Footer and bottom margin.
          I have to do that it first get how much space is available after table (body subform), if there is 10-12 lines space available then it will print the footer. If there is no much space then it will create one more page and at that page header (sub-form) would be align at top margin and footer (subform) would be align at bottom margin. There would not be any blank table.
    condition:1
    Header Subform                                                                   |
                                                                                              |
    Table subform                                                                      |
                                                                                              |
    Footer at same page align bottom margin (if enough space)     |
    ===================================================
    Condition : 2
    Header Subform                                                                   |
                                                                                              |
    Table subform                                                                     |
                                                                                              |
    if no enough space for footer then  go to additional next page  |
    and create page like below:                                                 |
    ___________________________________________________|
    Header Subform                                          |
                                                                     |
    space                                                        |
    space                                                        |
                                                                     |
    Footer Subform (align at bottom margin)       |
    _____________________________________|
    Thanks
    Piyush

  • Header and Footer in not displaying correctly on each page in Adobe Forms

    Hi experts,
       I need your little help on Adobe Form.  I have develop a customer account statement and facing problem.
         In header and footer part I have to display customer address. It is ok if data is of one page. But when data is overflowing, customer address is showing only at first page in header, and not displaying address neither in header nor in footer(footer section will print on last page, it may be either first page or third page ) on other pages. (Address is table type data )
           Header and footer Section address has been designed on Master Page.
    Please help me to resolve these two problems as soon as possible.
    Regards
    Piyush

    I found this post which I hope helps:
    This can be done by bit of tweaking using JavaScript. 
    Actually the problem was, the header was printing continuously in subsequent pages and once the header data was over the rest of the pages contained blank header. But we need have to print same header for each group of items till that group of items finish in the specific page. And for new group of items different header will be filled and so on.
    So to overcome this issue, create the item table in such a way that the header data is also included in the item table for each group of items. In the layout, select your header field and the event READY LAYOUT and write the below JavaScript code. This event is called for each page for that header field, so you can directly map the item table value and put it in your header field.
    // Get the current page
    var currpage = xfa.layout.page(this);
    // variable to store number of fields in that page.
    var fields = 0;      
    // Get the number of fields
            fields = xfa.layout.pageContent(currpage-1, "field", 0);
    // Loop on each field on the page
            for ( i=0; i<= fields.length-1; i++ )
    // Check if the field is in the item table column (it will be actually header data column in your item table)
                if ( fields.item(i).name == "TL" ) 
    // Fetch that value and store in your header field.
                           this.rawValue = fields.item(i).rawValue;

  • How to make a condition check on footer text in adobe forms ?

    Hi all,
    I have a requirement where I need to change the existing footer text in the adobe form ( text is hardcoded in the layout ) .
    I need to put a condition where new text can be placed or the existing text . Is this possible in the layout only ?? Because the text is hardcoded . I dont want to do programming in the interface for such a small req . Its a urgent req . So please advise .
    Thanks
    Barun

    Hi Barun,
    Using Javascript in Adobe, we can hide the footer. Please find the document below.
    Using Java Script in SAP Adobe forms to dynamically select Logo / Image on the basis of a field value
    Regards
    Rajkumar Narasimman

  • Dynamically Adjusting the Font of Field based on length of vaule - Adobe forms

    Hello Experts,
      I have a requirement where in i need to adjust the font of the field dynamically based on the length of the value.
    There is a less space in the adobe form layout and if there is long length (Above 50 Char) value coming then it is showing in multiple lines overlapping on another field.
    I just want to dynamically pass the Font to field.
    BR,
    Nikhil Kulkarni

    Hello Sven,
      Thanks alot for your reply. My field name is AGR_NAME  , so i am writing the following logic and is not working. Please correct me where i am going wrong. Many thanks.
    agr_name   is my field name.
    data.#pageSet[0].Page1.AGR_NAME::ready:layout - (JavaScript, client)
    var len;
    len = agr_name.length;
    if (len < 3)
    this.font.size = "20"; 
    }else {
    this.font.size = "3";
    Do i need to change some thing in the above java script code which i have written in Layout:ready language : Java script Run at : Client.
    BR,
    Nikhil Kulkarni

  • Footer is override with page in  sap adobe form

    Hi
    My problem is whenever page is flowed  after then footer is override with page . i have created header and footer in master page .  then header and footer will automatically come in all report. but some report contain large description that time footer is override with page. 

    Hi Gupta,
    You can also refer the below links
    Adobe Forms: Fancy Footwork – Footer floating at the bottom of the page
    Displaying any object on the header/footer of a specific page in Adobe forms
    Hope this helps you.
    Regards,
    Rama

  • Why is the powered by Adobe Forms Central footer reappeared on our web forms?

    Our online registration forms now have the Adobe Forms Central advertising footer reappear. We paid the subscription to not have that. ideas on why they have now reappeared?

    These forms are not embedded correctly. I'm surprised they even work. You need to go to the distribute tab, click Embed button, copy the embed code provided and then paste that into your HTML. This FAQ explains in more detail and some of the issues you may encounter while embedding: http://forums.adobe.com/docs/DOC-1991
    Randy

  • Printing Footer Only on the last page of adobe Form

    Hi Experts ,
    I have a requirement of printing text only on the last page of the adoe Forms.
    I know how to do this in Smart Forms , but being a novice in adobe forms i am unable to get the exact place to puth these conditions.
    Please reply ASAP.
    Thanks

    Thanks .
    Problem Solved.
    Here is the Code snippet in Formcalc language that i used in the intialize event
    var curpage  = $layout.page ( ref ( $ ) )
    var totpages = $layout.pageCount()
    if ( curpage ne totpages ) then
    $.presence = "hidden"
    endif

  • All Records are not getting displayed in adobe form from table

    Hi All,
    I Want to display records from table  to Adobe Form Table .
    But While Displaying only some of the records are getting displayed How can i display all the records in next pages of adobe form.
    Its Urgent PLZ Reploy soon.
    Thanks & Regards
       Kiran

    dear friend,
    please check the adobe format, must be match to
    the data base format.
    pls go to the setting and adjust the data base table.
    if nothing is going click the radio button
    html format.
    that will work.
    rewards are expecting.
    vivek

  • How to change co-ordinates of an internal table in page 1 & 2 using offline adobe forms?

    Hello All,
    How to change co-ordinates of an internal table(main window data) from page 2 onwards in offline adobe forms. For e.g., I need to print my internal table around 3-4 lines along with header&footer(only 1st page)in page 1. From 2nd page onwards Internal table should print header and use remaining page til end.
    Thanks in advance for your help.
    Thank you,
    Janakiram.

    Issue resolved...need to use content area option to achieve the same.
    Thanks,
    Janakiram.

  • Multiple rows in a single table cell - Adobe forms

    Dear All
    I am developing an adobe form which conatins a table alongwith other screen/ form elements.
    This table is bound to a data node and contains only two columns. Number of rows will be determined at run time.
    Each cell of the table will contain three rows seperated by a space in between them. Please refer to the diagram below for more understanding.
    Yes
    ABC
    No
    PQR
    Not Known
    XYZ
    I have no idea how to achieve this.  Can anyone help?
    Regards
    Vineet Vikram

    Hi,
    Here are the steps how you can do it.
    1. Create a table.
    2. In the Library palette, click the Standard category and drag the Table object into a cell in the main table.
    Note: If you selected Donu2019t Show This Again in the Insert Table dialog box, when you select the Table object from the Library palette, LiveCycle Designer automatically inserts a table with the same number of columns and rows that you inserted the last time you used the Insert Table dialog box.
    3. In the Insert Table dialog box, enter the number of columns and rows. You can enter a maximum of 20 columns and 50 rows. You can add more columns and rows after the table is created by using the Insert commands on the Table menu.
    4. To add a header row, select Include Header Row In Table.
    5. To add a footer row, select the Include Footer Row In Table.
    6. Click OK.
    Regards
    Runal

  • How to avoid printing a balnk page at the end in the Adobe form output

    Hello Experts,
        Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
    I have a master page with header n footer and a body page seperate.
    For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
    "after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
    Can someone guide me as how to solve this problem.
    Any help is appreciated. Thanks in advance.
    Regards,
    Mahesh

    hey mahesh,
    this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to  initial or space).
    This can be handled by doing the following
    By knowing the number of line items by the following stmt.
    describe table itab lines v_lines.
    Now you have the value in v_lines.
    use a counter in ur form and keep it increasing it by 1  ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
    ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
    this should be along with the condition which u have already put, ie when ever line item no changes
    when both these conditions are satisfied , then only the new page will be triggered.
    Hope it helps,
    Reward if useful,
    Regards,
    KP.

  • Version Control for adobe forms

    Dear All,
    We have a situation where we already go live with version 0 of our adobe form. Now, we have an enhancement to the form i.e.: some new functionalities and new field. Previously we have tried to transport the new changes to the production without any version control and those processes that have been already started prior to the new changes encounter error when the user continues the process.
    I am wondering how do the version control works and any documentation on how to configure it?
    Thanks in advance
    Regards,
    Bryan

    Hi Brian,
    Here is some information that I found in the IMG on Create ISR Scenario...
    Create ISR Scenario
    Use
    In this IMG activity, you create an ISR scenario that has a one-to-one relationship with a form scenario. To be able to use a form scenario in a process, one ISR scenario must exist for each form scenario. The ISR scenario and the form scenario must be linked with each other. You make this setting in Customizing for HR Administrative Services in the IMG activity Link ISR Scenario with Form Scenario.
    In the form scenario, you define primarily the basic set of form fields and their processing through the backend services. In the ISR scenario, you specify the definition of the user interface. You also specify which form is used for the display and how the layout of this interactive form is designed. You use interactive forms based on Adobe software to create and process the forms.
    ISR scenarios and form scenarios are version dependent. The version numbers of the ISR scenario are assigned automatically. Note that a form scenario must have exactly the same version as the linked ISR scenario. For this reason, you should always create a new version in the ISR scenario first and then use the same version number when you create a version in the form scenario manually.
    Note
    If an ISR scenario or form scenario (with an existing version) has already been used in a productive process, you should not change the configuration. If you want to make changes to a process or an ISR scenario or form scenario, you should always create a new version, and only ever use that new version in the future. In this way, processes that have been started can be concluded with the old version and new processes can be started simultaneously with the new version.
    This is from the Create Form Scenario documentation...
    Create version
    Form scenarios are version dependent, which means that there is at least one version of each form scenario. Versions are linked with processes. Since processes can vary, you must also be able to adjust the associated scenarios. To be able to provide different forms for process variants, you create versions.
    You can still process and change an existing version at a later point in time. Once a version has been used to execute a process, you should not make any more changes to this version; instead, you should create a new version.
    The form scenario and the (linked) ISR scenario are both version dependent. They must always have exactly the same version numbers. Note that the version number of the ISR scenario is generated and cannot be entered manually. When you create a new version in the form scenario, you therefore have to use the version number generated in the ISR scenario.
    If you have already made extensive Customizing settings for the form scenario and want to create a new version based on the settings, you should use the IMG activity Manage Form Scenario.
    Hope this helps...
    Cheers,
    Kevin

  • Reducing the Text height in Adobe Forms

    I have a text field which I have included for the long text of me22n transaction in the context node of Adobe forms. In the form I want to adjust the maximum height of the text field using java script or any other way, as in I do not want to print the text if it exists for more than 3 lines?

    You need to implement a "flowed" design. the concept of flowed means that your field/subform/form expands as your data grows.
    To do this, inserrt a subform and mark it as flowed (Top to Bottom), then drop in a text box and bind it to your input field.
    In your text box's properties, make sure you allow Multiple Lines, and in your Layout pallette make sure Expand to Fit checkboxes are checked.
    your field will grow or shrink depending on your input data.
    EDIT: if you want to hide your field, you need to use formcalc or javascript. you need to check some value (whatever that is, is up to you) then hide your field.
    if (BUSINESS_UNIT eq "G/A" ) then
      COMM_DLY_COSTS.presence  = "hidden"
    endif
    Edited by: Robert Phelan on Aug 25, 2011 5:25 PM
    Edited by: Robert Phelan on Aug 25, 2011 5:27 PM

  • Print adobe Form in CRM

    Hello,
    i´m new with ADOBE Forms in SAP CRM.
    I created a ADOBE Form to printout the CRM 7.0 service order.
    But i do not know how to trigger the printout.
    In the post processing framework i found under external communication PDF-Form. Here i need a implementation of BADI DOC_PERSONALIZE_BCS.
    Is this the right point to trigger the printout of ADOBE pdf in CRM?
    Or ist there a better solution?
    If yes, could somebody provide a working example for this BADI implementation which i can adjust for my needs please.
    Thank you
    Best regards
    Manfred

    Hi Manfred,
    Is this resolved. I also have similar issue, how did you solve this.

Maybe you are looking for

  • My macbook pro is not charging - any help please!?

    My macbook pro is not charging - any help please!? <Edited by Host>

  • Key generation using DBMS_CRYPTO

    Hi, I have a question about DBMS_CRYPTO pacakge , which can be used for encrypting sensitive data. When we use this package, is it a must that we have to supply the encryption key or is it that the package can itself generate the key? I read in the d

  • Lauching Workbooks without Analyzer BI 7.0

    Guys,     Any ideas/suggestions on Lauching Workbooks without installing Analyzer in local machine. Thanks.

  • Internet crashes

    i was wondering if anyone else is having a problem with the iphone crashing their WI-FI when they connect to it at home. when i connect my phone it crashes the entire internet for almost everthing except the phone itself. is there any setting that i

  • Cisco 871W eZVPN is unable to connect Cisco PIX vpn server

    crypto ipsec client ezvpn TEST connect auto group Cisco key cisco123 mode client peer 172.1.1.1 xauth userid mode interfactive interface FastEthernet4 ip address 10.1.1.1 255.255.255.0 ip access-group 101 in ip nat outside crypto ipsec client ezvpn T