Adjusting Database in Quality server

Hi All,
I have changed the datatype of an existing database from NUM4 to INT4 and adjusted the database utility before activating in a development server. When I moved the transport request to quality server, the transport request got terminated in quality server giving the return code 12. The error is:
Table conversion 06/01/2007 06:16:31 (12) Canceled
The database table contains data before this transport moved and I am not having authorization to adjust the database in quality server.
Please provide me any pointers for this problem.
Regards,
Lavanya.

Hi,
Actually the the transport got terminated during the adjusting phase which should not happen.
The steps 5 and 6 failed in the below mentioned steps:
   1 Initialization
   2 Dropping of indexes, renaming of original table
   3 No action
   4 Activation of transparent table
   5 Conversion of data to new table, deletion of renamed table
   6 Creation of sec. indexes
Regards,
Lavanya.

Similar Messages

Error while transporting the badi from dev to quality server

Dear Freinds
         Iam getting the error " Method Execution   21.11.2007 11:55:03    (8) Ended with errors "
        i expended the error (with return code as 8) and i found th below errors
Multiple active implementations for definition HRECM00_CALCBASE
Errors occurred during post-handling AFTER_IMP_SXCI for SXCI L
AFTER_IMP_SXCI belongs to package SECE   --- what does this mean??
The errors affect the following components:
    BC-DWB-CEX (Customer Enhancements)
What exactly this error iam not able to trace . Before releasing the object from the
development server i have see any error's are there the extended check hasnt given me any errors either.
The help for this error says that
"Procedure
Deactivate the implementations active for this BAdI definition one by one until not more collisions occur.
You should use transaction SE18 (Utilities -> Adjustment -> Multiple-use interfaces) to solve thes conflicts systematically."
i have did what sap has said ............. i can see that in the quality server a custom badi
of FI module has been in error. Will this be a reason for my badi ...which doesnt have any error..
any one have idea on this error pleae let me know.
regards
saymala r.

hi Raju,
i tried after giving full access but again same error:-
please see the error log below:-
Start of the after-import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR ( )
Member formula expanded for imported master data
Start of data checker messages for Appset PETFAS
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Possible Dead File/Dir:
Error occurs when checking member formula use on other dimensions
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
No access to environment 'PETFAS'
InfoObject catalog /CPMB/PETFAS_CHAR is not available in version A
BPF: Error reading master data
No access to environment 'PETFAS'
End of data checker messages for Appset PETFAS
End of after import methode UJT_TLOGO_AFTER_IMPORT (Aktivierungsmodus) - runtime: 00:00:
Starting after import method UJT_TLOGO_AFTER_IMPORT for object type(s) AAPS,AMBR in dele
End of after import methode UJT_TLOGO_AFTER_IMPORT (Löschmodus) - runtime: 00:00:00
Errors occurred during post-handling UJT_AFTER_IMPORT for AAPS L
UJT_AFTER_IMPORT belongs to package UJT
The errors affect the following components:
    EPM-BPC-NW-TRA (Transport)
any suggestion..
thanks,
Ambika

Error while starting Quality Server

Dear All,
I am getting the following error while starting the Quality server.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
hgazfsrv:azfadm 1> startsap
Checking AZF Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
open logfile '/usr/sap/tmp/dev_coll.tmp' failed... use stderri
19:04:58 06.04.2010 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
19:04:58 06.04.2010 ERROR: Make sure directory /usr/sap/tmp exists or specify D
IR_PERF
19:04:58 06.04.2010 ERROR: in profile and run saposcol pf=<profile>
saposcol already running
Running /usr/sap/AZF/SYS/exe/run/startdb
Trying to start AZF database ...
Log file: /home/azfadm/startdb.log
HQS database started
/usr/sap/AZF/SYS/exe/run/startdb completed successfully
Starting SAP Instance DVEBMGS07
Startup-Log is written to /home/azfadm/startsap_DVEBMGS07.log
Instance Service on host hgazfsrv started
Instance on host hgazfsrv started
hgazfsrv:azfadm 2> +
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Operating System: AIX:503
SAP: ECC6
DB: Oracle 10.2.0.2
The application is starting and working satisfactory, but is there any effect in any ways??
I have checked the file path /usr/sap/tmp/ , and the file is phycally existing, even if I restart the application I get the same error every time.
Any solution??
Thanks in advance.
Regards
Bhaskar.

Hi Uday,
19:04:58 06.04.2010 ERROR: cannot open log file /usr/sap/tmp/dev_coll.tmp
19:04:58 06.04.2010 ERROR: Make sure directory /usr/sap/tmp exists or specify D
IR_PERF
for resolving the above error , pls do the following
1. Login to OS with sidadm user
2. Stop saposcol ( saposcol -k )
3. now login on OS with root user
4. goto exe directory ( /sapmnt/<sid>/exe )
5. Run command chown root:sapsys saposcol
6. Run command chmod 4750 saposcol
7. Login with SIDADM and run command :- sapsocol -l
8. also check folder /usr/sap/tmp exists or not ., if folder already exists then rename file dev_coll.tmp
An if folder /usr/sap/tmp eixits and file is not present there then , simply stop and start SAP.
Now while starting SPA you should not get the error which you were getting previously.
Thanks
Anil

Re-transport the transport request in Quality server after System refresh

Hi
Users are moving the transport requests in NQA (quality server) using STMS tcode and Basis team is moving the trasnport requests using TP command in operating system level.
There are some transport requests that are released and are moved only to NQA server but not in Production server.
After the NQA refresh from Production server, we need to re-create the trasnport route for NQA server
in NQA using SE06 and STMS.
Now users want to re-transport the requests again in NQA server that was moved to NQA before the system copy but they are not able to make it. In the transport queue, users are able to see their transport requests but they are not able to re-transport.
When basis team try to move the same transport requests using TP command in operating system level, it failed with error:
- "Transport request is not in buffer".
- x2n0v2:nqaadm 14> transport250_NQAu126 908807
/usr/sap/trans/NDV/cofiles/K908807.NDV
is this the correct cofile ?y
cofile is K908807.NDV
source system is NDV
transport type is K
transport name is NDVK908807
Renamed to K908807.NDV.INTRANSIT on dbcindv
Datafile copied to dbcinqa
Cofile copied to dbcinqa
-rw-rw-r--   1 nqaadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NQA/data/R908807.NDV
-rw-rw-r--   1 ndvadm     sapsys       25606 Oct 29 11:13 /usr/sap/trans/NDV/data/R908807.NDV
-rw-rw-r--   1 nqaadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NQA/cofiles/K908807.NDV
-rw-rw-r--   1 ndvadm     sapsys         678 Dec 1 19:05 /usr/sap/trans/NDV/cofiles/K908807.NDV.INTRANSIT
Please compare the files before proceeding
Do you wish to continue the import?y
tp addtobuffer NDVK908807 NQA pf=TP_DOMAIN_NDV.PFL
This is tp version 305.13.25 (release 46D) for ANY database
Addtobuffer failed for NDVK908807.
Cofile not existent or corrupted (datafile exists).
If source system is available you may try to reconstruct
the cofile using the command "createinfo".
We used the following method to re-transport the requests to NQA server:
"STMS --> Request -->Delete (the request number)" method delete the transport request from transport queue and from the cofiles/data directory of the operating system and then " STMS --> extra-> other request-> add" allow us to put the transport request back to transport queue in NQA server. Once the transport requests are in queue, we can re-transport all of them one by one or in group.
Question: Is it the right way to re-transport the request in NQA (first delete if from transport queue and then add and then re-import in NQA server).
Id there is any other way to re-transport the requests, pls suggest us.
Thanks
Amar

No cross posting
Read the "Rules of Engagement"
Regards
Juan

Need client copy of production server in quality server

Hi,
I need the client copy of production server with application data in quality server. How i do this?
Main purpose is we have no data in quality server in testing purpose. if we configure the client of production server in Quality, we can test it by our requirement.
Regards
Somu

Try this
Preparatory steps in source SAP system
1 Take the trace of control file in the source system using the following command at SQL prompt as below:
SQL>alter database backup controlfile to trace;
The trace file can be found in the location <drive>\Oracle\<SID>\saptrace\usertrace.
2. Open the file with notepad and save a copy as controlsrc.txt
3. Stop the SAP
4 Shutdown the database from SQL prompt.
5. Take backup of database files.
6. Start SAP
Steps in the Target system
7. Install SAP system with <TGTSID>
8. Stop the SAP.
9. Shutdown the database from SQL prompt.
10. Take the backup of database files.
11. Edit controlfilesrc.txt with regard to the locations of datafiles of source system to be placed in target system taking in to account the space available in different drives and save as control.sql. Also SET DATABASE u201C<TGTSID>u201D RESETLOGS.
12. Replace the database files with source systems database files conforming to the control.sql
13. Start the database in nomount state from SQL prompt as below.
SQL>startup nomount
14. Run the control.sql script as follows:
SQL>@@<location of directory>\control.sql.
Once the script runs successfully, the database will be in mount state
15. Open the database with resetlogs option as follow:
SQL>alter database open resetlogs;
16. Create OPS$ users of source system conforming to target system conventions in database.
17 Set the environment variable dbs_ora_schema to SAP<SRCSID> as the owner of the database objects will still be as SAP<SRCSID>..
18. Start SAP.
Lalit Kumar

Quality server creshed

hi
my Quality server has been creshed , i have only online backup 17.08.2009 , i have a archive backup till date , can i retore the all database , if yes ,please advise , how can i restore the data .
venkat

Hi
Its very simple if your database is Oracle. Just use BRTOOLS from OS command prompt.
BRTOOLS will do everything for you.
Just follow the link
http://help.sap.com/saphelp_nw70/helpdata/en/65/96f1e4a6974512962197918624e1c5/frameset.htm
Edited by: Anindya Bose on Aug 7, 2009 5:23 PM

Quality Server

1. Dvelopment
2. Quality
3. Production
What if i'll skip quality server???

>
Amit Gujargoud wrote:
> SAP is R/3 structure.
>
> but if you skip QAT than no effect on you landsacp but SAP prefer and suggest to have and maintain R/3.
>
> Amit.
The '3' in R/3 actually stands for the Presentation-Application-Database Servers not for the Development-Quality-Productive Servers.
>
Sandeep Bhamare wrote:
I wanna know how much it'll affect if i skip quality server....
> i want specific answer...
The development will be more difficult, and there will be more surprises in the Productive server!
I hope the answer is specific enough

Problem with Cisco Bars after Database Republish ("Could not find Cisco Unified database on this server")

OS Version: 2000.4.3a
OS Service Release: 2000.4.5bSR21
OS Upgrade: 2000.4.5a
Bars Version: 4.0.15000
CUCM Version: 4.2(3)sr4b
During the upgrade process of our CUCM 4.2(3) to version CUCM 4.2(3)sr4b the database replication between our 2 servers (1x pub, 1x sub) failed. After fixing this via dbhelper tool (everthing´s green and smiling again) service seemed to be ok.
But now Cisco Bars does not work anymore. The backup process of the publisher fails with "Error=[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL-Server connection." So it looks like some kind of database setting for bars is misconfigured after the republishing process.
Yesterday I tried to reinstall BARS (now in the newest version 4.0.150000), but the same error message occured. Now I get the message "Could not find Cisco Unified database on this server" when I try to configure the Backup source within BARS.
Curiously the backup of our second CCM (sub) works as expected (but without CDR and TFTP Data). The "BackAdmin" User exists and is not locked (and wasn´t changed manually at all).
I am runnig out of ideas... :-(
Any hint or idea on how to fix this is kindly appreciated
best regards
Michael

Mike,
I don't have anything definitive here but I am wondering if there is a discrepency between the database names. In SQL Enterprise Manager, you can go to the Publisher and see what the current database name is. It will be the one being replicated and will take the form of CCM0300 or CCM0301 or CCM0302. You should see more than one. Anyway, take note of the name.
Then on the Publisher launch regedit and go to HKLM\Software\Cisco Systems, Inc.\DBL\
Look at the values for DBConnection0 and DBConnection1.
It will be something like DSN=CiscoCallManager;Server=;DATABASE=;Trusted_Connection=yes
Does the in the DSN match what you expect?
Also, going to back to SQL Enterprise Manager, check out the permissions on the database (Right Click->Properties, go to Permissions tab).
Another thing to check if you think it is permissions related is the AdminUtility.exe (c:\program files\cisco\bin\). This can be used to resync system account passwords.
TBH, I am just shooting in the dark here but these are things I would check.
Regards,
Bill

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

Development and Quality server using different screen color setting

Hi,
I want to differentiate the Development and Quality server using different screen colors,
How can I set different color logon screen for the different kinds of servers.
Thank You.
Best Regards,
M.Thirumoorthi
[email protected]

Hi Thiru moothi,
Please check these links :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/modifyingtheLogon+Page&
Custom Password Change Page
Custom Portal Logon Page
Reward points if handy!
Cheers,
Sandeep
Edited by: Sandeep Tudumu on Mar 26, 2008 7:41 PM

The security database on the server does not have a computer account for this workstation trust relationship

When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>

Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

Can we use different Databases (Oracle & SQL Server) in one report?

Post Author: venki5star
CA Forum: .NET
Hi there.
Can we use different databases (Oracle & SQL Server) in a same report?
If possible how?
Another question,
Can we change the Provider Name at runtime of the given report. If so the above question is useless...
Thanks in Advance.

I tried this using Oracle Provider for OLEDB (the one that supplied by Oracle Client) and Crystal Reports 9. you can drag the column into designer but the image does not appear in preview.
I guess it's because CR does not recognized it as image, and there are no information that the blob data is an image at all.

How Can I Copy an database from one server to another ?

Hi All,
I need to copy an existing database from one server to another server. I want to maintain all the settings from the source database.
I´m not used to Oracle database and i´d be glad for any help.
How can I do this ? Do I need to backup and restore in the other server ? Do I need to copy files from one server to another ?
Any help will be really appreciated.
Carlos.

I think a simpler approach, other than using RMAN, is to do a database export from the source and then import them into the target database. But you will need to do some ground work on the target, i.e, create database, tablespaces, and schemas (with their name the same as those in the source database.)

Difference between database features - SQL Server 2008 R2 navtive vs SQL Server 2012 with SQL Server 2008 compatibility set?

I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?

Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Problem with restore database in sql server 2008

hi,,,when i want to restore database from a .bak file i see this error
TITLE: Microsoft SQL Server Management Studio
Restore failed for Server 'ALI-PC'. (Microsoft.SqlServer.SmoExtended)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1447.4+((KJ_RTM).100213-0103+)&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476
ADDITIONAL INFORMATION:
System.Data.SqlClient.SqlError: The database was backed up on a server running version 10.50.4000. That version is incompatible with this server, which is running version 10.00.1600. Either restore the database on a server that supports the backup, or use a
backup that is compatible with this server. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.50.1447.4+((KJ_RTM).100213-0103+)&LinkId=20476
BUTTONS:
OK
i checked overwrite the existing database(WUTH REPLACE) in option,but i cant restore again,,,please help me

Hi,
You need to install SQL Server 2008 R2 Service Pack 2
Download
http://www.microsoft.com/en-us/download/details.aspx?id=11093, you are currently running the RTM and the backup was from Version 10.50.4000 and your attempting to restore to version 10.00.1600.
To find your current SQL Version open a New Query and paste the following then execute
SELECT @@VERSION AS 'SQL Server Version
Reference:
http://sqlserverbuilds.blogspot.com/
http://support.microsoft.com/kb/321185
http://technet.microsoft.com/en-us/library/ms177512.aspx
Cheers,
-Ivan

Adjusting Database in Quality server

Similar Messages

Maybe you are looking for