Adjusting Transactions- trying to save changes getting error

I am trying to save changes to distribution segments on Transactions in the Receivables module (Transactions --> Transactions) and I am getting this error message:
FRM-40654 Record Cannot be Updated.
A search in Metalink said to check for trailing spaces. However, it says
Please find file afchrchk.sql under $FND_TOP/sql. Please run the
same and this will create a procedure: chk_trail_space. Now after successfully
running this , please execute the below commands and then this will diagnose
the problematic columns (trailing spaces) and then run subsequent update scripts
and check whether the issue is resolved or not.
But we do not find afchrchk.sql in $FND_TOP/sql.
What would be the problem?

what version of apps are you on? On 11.5.10 it is available under $FND_TOP/sql
REM +=======================================================================+
REM | Copyright (c) 1992 Oracle Corporation, Redwood Shores, CA, USA |
REM | All rights reserved. |
REM +=======================================================================+
REM | FILENAME
REM | afshrchk.sql
REM | USAGE
REM | sqlplus applsys/pwd @afchrchk <table> <column>
REM | where <table> and <column> are optional 'like'-style clauses
REM | DESCRIPTION
REM | Check requested table.columns for invalid trailing spaces and
REM | and control characters.
REM | These characters cause 'FRM-40654: Record has been updated.'
REM | errors when column is queried in a form.
REM +=======================================================================+
REM $Header: afchrchk.sql 115.9 2005/10/06 06:57:45 stadepal noship $
REM dbdrv: none
basically what afchrchk.sql does is to check for spaces on varchar2 columns for tables that you provide as an input and then trim those.
You can do the same by querying and updating ra_customer_trx, ra_customer_trx_lines and other related tables setting all varchar2 column values to trim(column_name)

Similar Messages

  • When trying to save photos get error (memory RAM, CS6)

    After working on the photo, if you try to keep getting the error
    could not save as ***.jpg because there is not enough memory ram. try saving without optimization or as baseline jpeg
    My notebook config:
    core i3 M380. 2.53 GHz
    memory 2gb
    hdd ~ 40gb free disk C.
    graphic integrated
    Adobe Photoshop CS 6 13.0.1.1
    Windows 7 32bit
    PS Preferences:
         Memory used
         Available RAM: 1531 Mb  
         Let Photoshop Use: 995 Mb (65%)
    Scratch Disks:
         C:\ 42.59 Gb Free Space
         D:\ 41.23 Gb Free Space

    You have the bare minimum RAM for the program to launch.  Running it well is a different matter.
    You don't have nearly enough available drive space on that C drive to accomodate both the swap files of the OS and a Photoshop scratch disk.  Your D drive is woefully short on space too.
    My system is bare bones minimal and I have a dedicated 250 GB hard drive as my primary Photoshop scratch drive.
    The error message you are getting means exactly what it says.

  • My ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw

    my ipad will not come on.  i tried to restore and get error message 1603, dont know how to take out itsw which it tells me to do.

    Error 1603
    Follow the steps listed below for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW  in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    The above is from the 2nd link below.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

    I got a vius and after removing Pro would not work, trying to reload and getting Error 1334, can someone advise me how to fix.

    I downloaded, ran and restarted, tried to install Pro got same error
    Thank You!
    Robert W. O'Rourke
    Tesla Systems, Inc.
    <phone # removed - kglad>

  • When trying to save interface ,gives error

    Hi ,
    When i am trying to save it gives error below.
    Interface has following errors.Interafce can't be generated or executed.
    Do you want o save anyway.
    Critical     Staging Area     The staging area of this interface is defined on the target but has a logical schema different from the target datastore.
    Redards,
    srini

    Hi,
    you are using different schema for your target tables. i mean you are creating target datastore different from where your sources located.
    suppose that you have staging and target schema. you have to create your tables in staging if sources are located at staging area.
    if you want to use target schema, you have to configure one more logical schema at topology tab.
    and select new logical schema when you are establishing your new interface at overview tab.
    i hope this helps.
    www.odilibrary.com
    Ugur MIHCI

  • Gallery app crashes when trying to save changes

    After cropping a photo in the gallery app, it crashes when trying to save the changes made to the photo. It does not happen when saving other changes.

    It's an Alcatel One Touch Fire on 1.0.1. But interestingly enough the problem is no longer occurring. I'm still not sure about what caused it. So... I suppose I can mark my question as answered. Thanks for replying.

  • While trying to update, I get error message 3259.

    While trying to update, I am getting error message 3259.  I think is a connectivity issue but I have connected using Airport and also tried hardwiring it and no luck.  This is a Nano 6th Gen.  Any suggestions?

    dragonflylover wrote:
    While trying to update, I am getting error message 3259.  I think is a connectivity issue but I have connected using Airport and also tried hardwiring it and no luck.  This is a Nano 6th Gen.  Any suggestions?
    You make no mention of connecting directly to your computer.  Was this done?
    How are you hardwiring an iPod Nano?

  • Trying to update iTunes, get error message "The older version of Bonjour cannot be removed" How do I remove it?

    Trying to update iTunes on Windows XP, get error message "The older version of Bonjour cannot be removed." I have removed several copies of the file Bonjour in a couple of different folders but the error message persists. What am I missing??

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • I have CC since 12/13, Last month my desktop photoshop App only opens to allow me a 30 day trial period, as if I wasn't a member. Tried re-downloading ,but gett error 50

    I've been with CC since 12/13. Downloaded LR and PS(64bit) and worked fine. Last month, when trying to open PS on desktop, it only allows me a 30 day trial (even though I'm paying monthly fee). When I try to download PS again I get error code 50. Any help please.

    sign out and then back in to your cc app.
    if that fails, follow solution 2 here, CC desktop lists applications as "Up to Date" when not installed

  • TS3694 have no service on phone, trying to reset phone, getting error code 3

    been having no service, tried to reboot,
    getting error code 3 on computer

    Hey hunbu!
    You may want to try the more general steps for resolving a restore issue found in the following article:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • Win 7 Clean install Firefox 7.0 install ok, but when trying to start Firefix, get error- "XULRunner "Couldn't load XRE functions.""

    Tried turning off antivirus/antispyware - nstill get error msg.
    Also have Thunderbird installed.

    When you say "clean install", do you mean that you also manually erased the C:\program files\mozilla firefox folder before installing, to remove any remaining files from a previous install?
    If so, it seems there is a problem with your profile. Have a look at https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting, and perhaps more specifically https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile and follow the instructions there for how to test if the problem goes away with a new profile.
    Just post back here if you have questions.

  • When trying to print I get error code 30892 and authentication required how do I fix this?

    I am new to my Mac and am having trouble printing.  I keep getting error code -30892 and authentication required and it can't print.  I have sharing features open on both my PC and my Mac.  Any suggestions?

    Doesn't sound like any error number I'm familiar with. What's your set-up? Are you using a print server?

  • Error when trying to save changes to excel workbook in LabVIEW 5.1

    After making changes to an existing excel workbook I try to use the workbook invoke close and I receive error "Error 1004 occurred at Exception occured in Microsoft Excel, Close method of Workbook class failed". How can I save the changes to workbook without receiving this error.

    Be sure you close all references before closing the workbook, except workbook and application, and check where the error is born wiring the error cluster. Sometimes errors are carried from a earlier step, avoiding correct execution.
    Hope this helps

  • I have 12 brand new installs of 27" I-Macs, all running Adobe CC. I have several users trying to make simple saves and getting Error -108 Out of Memory errors.

    The Mac OS is 10.9.5.
    I've already gone into plug ins and Scratch disk preferences and changed the secondary  location to the user's hard drive, but this does not solve the problem.
    I cannot change the "primary " from Startup, but I did change the secondary to the user's ID instead of None.
    These are all brand new Macs in use no more than two weeks.

    Windows 7 includes DirectX 11 in its baseline and it is not necessary to install another version of it.  Your problems may be caused by the installation of the version of DirectX you installed.  Uninstall the one you installed and see if you
    still have the errors.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • I plugged my usb into a macbook air and opened a word document. when i tryed to save it an error box popped up saying word had encountered an error but when i tryed to click on the X it just kept popping up how do i get out of it?

    Please Help I don't know what to do and the laptop isn't mine

    If you don't need the changes saved then you can force quit the word app.  On the menubar, cick the  > Force quit > select word.

Maybe you are looking for