Adjustment Layer is slowing my film down, help?

I've put an adjustment layer over most of my film but now it is incredibly choppy whenever motion is involved. Any way to change this? Does it have something to do with the original layer settings?

Hi Jim, sorry for the late reply. All I applied to the layer were color corrections. I adjusted 3 or so colors so that the film might have a 70s tv feel. I've recently decided to scrap that idea as going through each clip and fixing the colors individually isn't worth it.

Similar Messages

  • I have upgraded to OS X 10.9.2 (13C64), its lagging, i can print anymore, slows my mac down, help me please

    i have Upgraded to OSX 10.9.2 (13C64) , now my Mac is SLOW, sometimes it takes sometimes to porcess my simple clicks and i cant print ..help me please

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Photoshop crashes when I use adjustment layer HUE

    Every time I use adjustment layer for HUE/Saturation. I put the eye dropper on a specific color and move it right or left and it crashes. Wants me to reopen and try again

    I have a cloud account with Adobe 214.2.1
    Mac ver 10.10 Yosemite
    Adjustment layer Hue/Saturation open Holding down command key to use Hue slider. When I release it crashes
    Thank you for taking the time
    Izzy

  • Problem: curve adjustment layer in cs4

    Ive upgraded to CS4 and I have found that the curves Adjustment layer runs slow and sticky and Its difficult to make fine adjustments. (the regular curves window works fine but you cant save it as an adjustment layer) I am running 10.5.6 on a 2x3 GHz Dual-core intel with 9gb of ram, a scratch disk of raid 0 with 500gb of freespace. This should not be a problem for my machine. is there a setting I am missing or is CS4 no good?

    I understand your annoyance about this. I didn't say it doesn't work, it does.
    "fine, critical moves that are intuitive and subtle" that's the problem with the new adjustments panel, it is more difficult to make these fine adjustments, still possible just less responsive. You can still bring up the old dialog.
    Did you do a search to find my explanation of how to use CS3 to create Actions that will bring up the modal dialog? I'm not going to take the time to explain it again, if you haven't done this. There is also a Configurator panel that John Knack posted has two buttons 'create new curve' and 'edit existing curve'. Configurator is a new app that Adobe have introduced. Read all the discussions so far on the forum.

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Can't click drop-down lists in curves adjustment layer

    Odd behavior in released x64 version of CS6 for Windows: on my laptop (ASUS G73S with 1.5 gb nVidia GeForce video), when I crop an image, the drop-down menus in a curves adjustment layer become unclickable. But I can still access the RGB channels using the Alt + 3, 4 and 5 shortcuts. This behavior doesn't occur on my workstation, and if I don't crop the image, the drop-down menus work fine. I have the crop tool set to delete pixels. Also, if I apply curves directly (not with an adjustment layer), the dialog box works OK. And the other adjustment layers seem to be working, too. It's only the curves layer that's doing this.
    Any ideas what this could be? I'm wondering if I should report it as a bug.

    I've noticed that a few times on windows 8 32 bit, photoshop cs6 32 bit with 4gb of ram, a nVidia 8400 gs graphics card and open gl seems to work fine.
    I guess that's probably some kind of glitch.
    One way to get back the dropdown is to click on the Curves Display Options in the flyout menu and then just click OK in the dialog.
    Added: It doesn't seem to happen if the crop tool is set to Classic Mode.
    Message was edited by: R_Kelly

  • How can I stop Layer Comps slowing down Photoshop

    Hi all,
    This topic has been discussed in other threads, but always without resolution. So as I have just encountered this problem today, I thought I would post the issue again to hopefully capture fresh attention.
    I just moved back over from Fireworks to Photoshop, mainly to make use of Layer Comps for displaying multiple states of my UI design. Everything was going swimmingly, but when I reached about 40 layer comps, Photoshop suddenly slowed, or at least the use of the Photoshop file with multiple layer comps slowed. If I try and drag objects/layers, they move painfully slow, making it unusable. If I remove all of the layer comps, everything speeds up again.
    I thought there might be a memory issue (as in I had run out!), but if I open two versions of the same file, one with the layer comps, one without, the one without works fine, but the one with the layer comps is slow. If it were a memory issue, surely both files open at the same time would be slow, as would the rest of Photoshop?
    I'm not sure how many layers I have, but the file is about 20mb in size, so not huge.
    I find layer comps extremely useful for UI design and certainly expected to make use of more than 40. Does anyone know of any fix or anyway of making this work? I wonder if the next CC version of Photoshop will have improved it.
    Thanks for any advice you might have.
    Alex

    Yes, I can't help but feel it is some kind of bug. If it were my PC running out of memory, then I would imagine both open photoshop files would run slowly, rather than just the one with the layer comps (while the other open file runs perfectly).

  • I have used Garage band to slow a tune down so I can learn to play by ear on my Violin and I'd like help remembering how I did this  Thanks!

    I have used Garage band to slow a tune down so I can learn to play by ear on my Violin and I'd like help remembering how I did this  Thanks!

    laurelfromvictoria wrote:
    slow a tune down
    http://www.bulletsandbones.com/GB/GBFAQ.html#changeimportedtempo
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Aftereffects CS4 Crashes when I try to resize an efffect on an Adjustment layer, Help!

    Anyone have the program crash when you try to resize an adjustment layer after you apply an Effect. The one I used was CC Rain and it resizes 1 few cm and Crashes. If you have had this please let me know what you did ti fix it. My CS3 works like a champ, Cs4 Is hangin then crashing.

    Hers is the intial message
    After Effects error: AE_OpenGL: A texture in this compositin is too small to render. Switching to Adaptive resolution mode. Click OK
    Then I get
    After Effects error: crash occurred while invoking render plugin "AE_OpenGl". Click ok
    Then is says
    After Effects cant continue: sorry, After Effects has crashed se adobe.com/support/products/aftreffects.html for known issues. if you still cant resolve, please contact Adobe Technical Support (2)
    (0::42)
    Then is givs me a chance to save the project then it goes in to
    Microsoft Visual C++ Runtime Library
    Runtiem Error!
    Program c:\Program Fi....
    This application has requested the Runtime to terminate in an unusual way. Please contact the application support team for more information. Click ok
    Then you have to run thru all the same errors again but get ine differnt
    Microsoft Visual C++ Runtime Library
    Run timer Erroe!
    Program:? C:\Program Fi...
    R6025
    -pure virtual function call,
    click ok

  • Keychain pops up every 30 seconds for all different kinds of apps, and is really slowing my work down.. I am getting really annoyed i have to keep putting in my password. Please help

    Keychain pops up every 30 seconds for all different kinds of apps, and is really slowing my work down.. I am getting really annoyed i have to keep putting in my password. Please help

    Have you run Keychain First Aid. Utilities> Keychain Access. From the menu bar click on Keychain Access> First aid

  • Apply adjustment layer to different layer?

    Warning: I know just enough to be dangerous. And barely enough to explain myself. I've just managed to create exactly the effect I want, but...
    I have a layer (HEADER) to which I applied adjustment layers (curves and levels) using "Use Previous Layer to Create Clipping Mask". So now, above my HEADER layer, I have the adjustment layers (with linked masks) with the little black right-angle arrow pointing down to my HEADER layer.
    Is it possible to copy these adjustment layers and apply them to a second layer (e.g. FOOTER)?

    Shoot, I knew someone would hone in on those names. This is an image originally created by a design agency. "Header" and "Footer" refer to "swooshes" across the top and bottom of the image. So ignore the meaning of the names...
    And I'm sure I'm overlooking something really simple... OK, I have the HEADER layer at the top of my layer stack. Above it are the Curves and Levels adjustment layers (actually there is a Brightness/Contrast adjustment layer also), with the little black arrows pointing down indicating that the adjustment layer is applied ONLY to the Header layer. (At least I think that's what those black arrows mean.) Cool.
    Then there are about five more layers of other stuff. The adjustment layers don't affect them. Cool.
    Then there is the Footer layer. There are several more layers below the Footer layer. I would like to take all three of those aforementioned adjustment layers and apply them to the Footer layer also. So I duplicate, for starters, the Curves layer. "Curves copy" appears above the original, with it's little black down-arrow. But when I drag it to be above the FOOTER layer, it loses its little black arrow and is now applied not only to the FOOTER layer but also to all layers below it. Not cool.
    Does that help? Thanks for taking me on...

  • Unsharp Mask on Adjustment Layer crushing whites during fade?

    I'm using Premiere CS6 with video footage from a Canon T2i. However, the issue appears regardless of the video source.
    When I apply a Film Dissolve to a clip in the timeline, then add an Adjustment Layer with an Unsharp Mask on a track above the clip, the whites in the clip appear to become crushed over the length of the transition, while still fading to black. This does NOT happen if I use a Sharpen filter instead of an Unshark Mask, and if I apply the Unsharp Mask to the clip directly instead of using an Adjustment Layer. Fading with another clip looks normal as well, the whites only get crushed when fading to black.
    If the problem had to do with the Film Dissolve processing in a linear color space, then I would expect similar results with the Sharpen filter. Likewise, if the problem had to do with the Unshark Mask, then I would expect to see the same thing when it is applied to the clip directly.
    Any ideas? I appriciate the help!

    Looks like a bug. Thanks. I'll escalate it.
    Workaround looks good, so thanks for that too! Nice find.
    PS:
    LensFusion wrote: If the problem had to do with the Film Dissolve processing in a linear color space, then I would expect similar results with the Sharpen filter. Likewise, if the problem had to do with the Unshark Mask, then I would expect to see the same thing when it is applied to the clip directly.
    I think it has to do with blend modes, but can't say for sure.

  • Exclude Track(s) from Adjustment Layer

    Hi everybody,
    I use Premiere Elements for many years and am now testing Premiere Pro in order to make the descision wether to change to pro or not.
    So I trying out several things and have mor than one question
    1.: I'm wondering if there's a method to bind an adjustment layer to specific tracks and not too ALL track below it.
    Problem: Using green screen footage and make the keying in the adjustment layer (because the footage changes with each project, but the keying settings are always the same - so an adjustment layer is great to keep the settings) means that the effects of the adjustment layer go down even to the track with the background footage that I want to insert. So I'm looking for a method to let the adjustment layer know an which track(s) it has to work on ... and to which it shouldn't.
    Is this possible? and how?
    2.: In Premiere Elements I loved the easy way to insert a fade-in or fade-out to video and audio tracks witch just a right click onto the clip in the Timeline and then choose "Add Transition" with the options "Audio fade-in", "Audio fade-out", "Video fade-in", "Video fade-out" that added the preset length for transitions to the clip. Tool me about a second.
    In Premiere Pro I don't find this feature in the right click options list. So, do I really have to add each fade-in and fade-out manually by using the effects options and setting the keyframes manually to 0 and 100? Seems odd that Pro is less clever than Elements ...
    Or how do I do that in Pro?
    3.: In the "Export Media" window I have trouble with the setting of what will be rendered, meaning that litte dropdown list with "all" or "workspace" - I hope you know what I mean?
    Problem: This settings always jumps back to "workspace", even if I used "all" last time. And "all" is the way I'm rendering my projects in 99%. So I'm wondering where I can change the preset of this option to "all".
    Thanks for your help in advance!
    Kind regards,
    Lutz

    Thanks @Ann Bens for your reply!
    1.: "save settings as preset" sounds great, in that case I guess I really wouldn't need any adjustment layer (which keys at least in my case great). And please keep in mind that I do not user 1 key only, but a combination of at least 3: can I define this combination as a preset, too? How? I just found a righ-click on the effect and then "save preset", I guess that's what you mean - but I couldn not make it work for a group of effects (keys) ...
    2.: Right! And I found out how to change the default transition and the shortkey for bringing it to the clip, works great
    3.: That's odd ... at least for the way I'm working. Is there no way to set the Export Tool to "all" as a new default? Because I need the Work Area Bar in the Timeline, too, but when rendering, I need all in 99% ... but am afraid I could forget to change the setting from WAB to "all". I didn't expect a professional and long developed software not to have settings for such an important option! Is there really now way?
    Kind regards,
    Lutz

  • Adjustment layer blur from AE to PP using dynamic link

    Hi there. I'm having trouble with a project I bring into PP from AE via dynamic link.
    Here's the problem. On my AE project, I have an adjustment layer with lens blur added to it. I also have a track matte assigned to that adjustment layer, because I have a specific shape in which I want the blur to be applied. Works fine in AE.
    However, when I bring the project into PP, the adjustment layer's blur is not applied to anything in PP. It does show up as a blur on animations I created in AE, but is not applied to any footage dropped under it in PP.
    Is this normal, or is there a workaround? At this point there it seems there is no benefit in using dynamic link over exporting the project as a clip with an alpha channel.
    If it helps to understand, the project is a lower third animation. The goal is to not only have it a little transparent but also slightly blur whatever footage is behind it, only in the area of the lower third.
    Any help is much appreciated!

    The export settings in PrPro should be ok, since they are the same ones I use for every other project. I did notice that the Max Render Quality checkbox was unchecked though. I just don't know why with the preview settings at max it still looks blurry. I have noticed that if I close down the project and reopen it, the problem might go away.
    I have tried exporting in AME, but sometimes the encoder just freezes up and won't render it. Again, another random issue. Not sure why that happens. (Though I recently learned about how to clean the cache and haven't tried exporting the project since then.
    I don't know if this will help or not, but what I do is align the footage up in PrPro and then use AE to import the footage. After getting everything the way it should, I use Dynamic Link in PrPro and pull in the AE file.
    I would assemble everything in AE, but the source material is P2 footage and AE doesn't have a viewer to differenate between all the clips.
    And to make sure for all clarity purposes, I can not reppplicate this problem. It seems to come and go as it wants, almost as if my machine is haunted.

  • Adjustment Layer bugs

    Hello,
    I have a few problems using adjustment layers:
    1. If footage beneath adjustment layer is scaled down, the effect of adjustment layer is also scaled down (see example)
    (Sequence is PAL Widescreen, Footage - XDCAM EX 1080i scaled to 55%)
    And it doesn't matter if I use 'sequence sized' or 'footage sized' Adjustment Layer.
    The effect is always the same.
    But if I stack two adjustment layers - effect of second one affects the whole frame.
    Problem no. 2
    I use "Levels" and "Gaussian or Fast Blur" on adjustment layer.
    But if "Levels" are turned on, it cancels the effect of Blur.
    Thanks in advance,
    Tomas M.
    P.S. Mercury Playback Engine Hardware accelerated (GeForce 570GTX)

    OK Jim, I'll try to express myself more clearly (although Averdahl and TomZid2012 understood me)
    Sequence is PAL widescreen.
    Footage on [Video 1] is XDCAM EX 1080i. It is scaled to 55% to fit PAL.
    If I add AL to [Video 2] with any effect (CC, Blur, Levels, it realy doesn't matter), then the footage is affected only
    in smaller region (see my attachment - it shows the effect of Fast Color Corrector, cranked up).
    But if I scale AL just a bit - then everything works fine and the whole frame is affected by AL.
    The same thing happens even with stills (if they are scale down).
    Averdahl says that it's already filled as bug. And you should be able to reproduce it from my previous (or this) post.
    But if it helps - I can send you small project with footage.
    Regarding blur - I know how "Repeat edge pixels" functions. And I know how to troubleshoot such things.
    I'm not a novice. I've tried all possible combinations of blurs+levels.
    But as I said - it happens randomly, so at the moment I can't reproduce this situation.

Maybe you are looking for