Adjustment panel and the Targeted Adjustment Tool

I have assigned the F3 key to toggle the display of the Adjustments panel. However, whenever I have an adjustment that includes the Targeted Adjustment Tool (such as curves) the F3 key activates the TAT rather than dismissing the Adjustment panel. I have to move to a non-TAT adjustment to allow F3 to dismiss the Adjustment panel. In fact, any Fn key will activate the TAT rather than it's assigned keyboard action. Is this normal behaviour? If so, it's most annoying.

No one else seeing this problem? It does not happen in CS4.
I'm guessing the "bug" appeared after I had set the Auto-Select Targeted Adjustment Tool. I have since removed the Auto-Select feature but now any Fn key will select the TAT rather than dismiss the Adjustment panel. You have to move to an adjustment without a TAT for the Fn key to dismiss the Adjustment panel. Definitely a workflow annoyance.

Similar Messages

I need help using the target path tool

Hi all,
I realise that I need to keep all my code on the main timeline, so now I need some serious help with targeting movieclips and buttons, when I use the target path tool (the little gun sight in the action script panel) it lets me navigate to the thing I want, but when I use it's suggestion it very often doesn't work, and I am left using trial and error to work it out. Ican get stuff to work, but I really have no idea why or how I am doing it, Sorry to be such a N00B, but I really think if I can work this out I am going to get somwhere.
Cheers
sub

subtlefly72 wrote:
Thanks kglad,
OK that is basically what I have been doing, but its been a bit hit and miss, but maybe now I see why, your last sentence
of course, all those objects have to exist at the time your code executes.
So if I am referencing something inside a mc and it doesnt exist on the first frame there will be an error?
exactly.
also what is the this. Object() and Object(parent) ??
Do I need to be using these?
not when using code on the main timeline. "this" refers to the current scope which for code on the main timeline, is the main timeline. the following are the same:
this.mc and mc
this.var1 and var1
And still I want to know why the target tool gives me a path that doesn't work?
i can't tell you much about the target tool. i've never used it. but i tried testing it just now and it seemed to work correctly to target a nested movieclip. again, you must sure that object exists when your code executes so if you target something on frame 2 (or greater) of a movieclip using code on frame 1 of the main timeline, the reference may be correct but the object won't exist when your code executes. there are a number of ways to handle that if it's your main problem.

Is there a way to remove the changes to the URL Bar, specifically the status information and the target URL?

To begin, I utterly despise the changes to the URL Bar and the removal of the Status bar. In order to stay with the latest version of Firefox I am attempting to recreate the look and feel as best I can.
I have already installed the Status-4-Evar extension. The only thing that remains is to remove the status information and the target URL from the bar.
Are there any settings in about:config that will allow me to make these changes?
EDIT: Status information can be removed by toggling. status4evar.statusInUrlBar. Still looking for a way to remove the target URL...

This code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line seems to remove the links that appear on hover.
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
.urlbar-textbox-container {color: inherit !important;}
.urlbar-textbox-container-children {opacity: 1 !important;}
.urlbar-over-link-box {opacity: 0 !important;}
</nowiki></pre>
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files

Where is the Components Panel and the Design Mode button in FlashBuilder 4.7 Premium?

I'm new to FlashBuilder. I've been using many years just Flash and now I'm switching to FlashBuilder. I've seen some tutorials, but the Interface in my copy of the program do not match the one in the tutorials. I could't find the componets Panel and the Design Mode button. Any ideea why?
My Laptop runs on Windows 7. FlashBuilder 4.7 Premium is via Creative Cloud:
SnapShot from Tutorials I've seen
SnapShot From my application
with yelow i've marked the place with the "Components View" and the "Design" mode button
whith that red line I've marked the place where the "Design" mode button is expected
I've notice the following menu:
Whe you click on Views: Window->Show Views->Other... an interactive dialog appears with the tree of views available. Above there is a textField where you can enter a filter. As you type the text, the tree updates accordingly, after each letter.
I've searched for the Components panel ... surprise!!!
nothing on filter
filtering for Outline View
filtering for Component View
the tree complete
the tree finds the Outline View
the tree is already empty
As you notice the list of views is empty even before I finish the spelling of the word "Component".
Is there something I should configure, or this feature is not available in this particular distribution ?

I found the answer myself. Looks like this new version does not support these features anymore: http://www.adobe.com/ro/products/flash-builder/buying-guide.html.
Strange...
The question rising here is what happens with this feature?
Will be available with a future update?
Will no longer be availalble in FlashBuilder, but in another Adobe Project?
Will never be available?
I belive this features are not important for advanced users... but I'm just learning this. I'm used to work in Flash. I write ActionScript, but I'm not familliar with the objects availlable in Flex, so the Component Panel and Design Mode is quite handy on this stage.
Plus, there is a real concern about the future of this technology, now beeing available HTML5. So, there is a question of oportunity investing time in learning things no longer supported. The most frustrating thing is not having an answer to this question. Even a "No" is better than "We don't know yet" <- the answer I received from online support.

SAP System copy without shutting down the source and the target system

Hi,
We need to need to System refresh without shutting down both the source and the target system, i read the docs from SAP looks like we need to shutdown the source system during export and import phase, is there any way to do the system refresh without shutting down the system.
Sathish

Hi,
Think a little bit about what is a database and you'll get the answer that what you "need to need" is impossible.
Of course it is possible to keep the source running (hopefully, because ususally it is the production system !) by using an online backup, but you need to stop the target system because you will restore a backup on it.
If you use the export/import way, you have to stop both source and target system.
Regards,
Olivier

Firefox often hags with an error message somethng like_Script not complete or still running._I cannot uninstall Firefox with the uninstall program routine inthe control panel and the Mozilla uninstall helper.exe will not run either. How do I uninstall Fi

Firefox hangs with an error message something like - Script not complete or still running.
I cannot uninstall Firefox with the uninstall program routine in the Control Panel and the Mozilla uninstall helper.exe program will not run either. How do I completely uninstall Firefox so I can make a clean reload?
== This happened ==
Every time Firefox opened
== Not sure but I think it was after the update

Thanks for the reply.
I am very new to these forums (or is it fora?).
I didn't know there was a Tomcat forum.
How to I find it.
Ta much & best regards,
Pete

Hi, i'm a new member of this community. I've recently learn about flashback malware and other threats to Mac devices. I've installed the new Mac OS X update for Lion 10.7, and the flashback removal tool. what about the update for Flash Player?

Hi,
i'm a new member of this community. I've recently learn about flashback malware and other threats to Mac devices. I've installed the new Mac OS X update for Lion 10.7, and the flashback removal tool. What about the update for Flash Player? Should i install it? Otherwise, should i permanently remove this app?
I realy need some advice.
Thank's to all.

Be sure to install the latest version of Safari (version 5.1.7) which is available via Software Update (in the Apple menu) if you have not already installed it. This update will automatically disable older versions of Flash when new versions are available, and will instruct you on how to install the latest version on your system. This should help keep your system safe from any vulnerabilities in Flash.
Note that this is only useful if you use Safari, though other browsers have their own update mechanisms you should research and enable or configure to your liking.

Difference between the planned cost and the target cost

Hello guys,
I am really confused between the planned cost and the target cost.As Per the sap help target cost is cost required to produce certain quantity of material.And planned cost even carry the same definition.
So is there any difference between these two cost.Are they same?

Jitendra,
Genarally in CO we will define Target cost is getting calculated in the Production order based on the "Standard Cost Estimate" after GR. Planned costs are calculated based on the current costs.
Example:
Assumption: Assembly Material A with Standard Price, Component B and Component C is maintained with Moving average
Material A Cost 1EA = (component B = $10 + Component cost C = $20+ Activity Price $1) = $31, this is the standard cost estimate for the material.
Now I create a production order on 15th of the month, and the Moving average price for component is now $20 due to subsequent GR with higher price. Now the planned cost for the order would be (20201)=$41, whereas the Target cost would be still $31.
Hope I was able to clarify,
Regards,
Prasobh

In PSE9 is there a way to enlarge the levels adjustment panel and effects panel for viewing?

In PSE9 is there a way to enlarge the levels adjustment panel for viewing? The histogram is so small.
I know we can use the arrow keys to change the settings for the histogram, but it is just the overall view of it I would like to see bigger.
I think with PSE8 the effects panel could be dragged out of the panel bin and made longer AND wider, but in PSE9 it can only be made longer when dragged outside the panel bin.
And I think the whole panel bin could be dragged wider or narrower.

not really apart from changing the resolution, but theres a a couple of things you can do
you can change the "minimum font size" in Safari (and other apps) in the General tab - this will enlarge any fonts to the minimum size you specify if they are under that size
the features in the accessiblilty section of system preferences might be worth a look as well
the pinch zoom feature is also useful
unfortunately there isn't a 1-button setting somewhere that can do this, because apps, documents, web pages, images etc all work independently from each other, they use different font types, different zoom levels, etc. You can't just enlarge them all in sync without content getting jumbled up/distorted. if enlarge an app/page/document and get it looking good, on the next one you would probably need to zoom in at a different level for it to look right

Noise reduction - RAW fine tuning and the Noise Reduction tool

Hi,
1- If I get it right, Aperture's RAW fine tuning "Automatic noise compensation" (translated from French) option uses the camera's information to adjust the noise. Is that correct?
2- The Noise Reduction tool is there to provide additional noise reduction, but this makes you lose some details. Is that correct?
3- How do you use them? I often find the Noise Reduction tool a bit overkill, but that's me.
4- This one is just out of curiosity. How does A3 compare to LR3 beta for you in that regard? In my testing, LR3 did a slightly better job (but A3 totally beats the crap out of LR2 for noise). BUT I have an old D50, and newer cameras handle noise better (especially Nikon), so does it really make a difference for a 2008 or newer camera?
Thanks!
Manu

Manusnake wrote:
pilotguy74 wrote:
I don't even have this option/checkbox in my Raw Fine Tuning brick.
I wonder if it's due to the type of files (Canon 7D). Do you still have those 7D files I sent you? Does the checkbox appear in Raw Fine Tuning for you with them?
I noticed this option in the manual the other day, but forgot about it until now.
True, it doesn't have the checkbox with the 7D files. However, it as a slider "noise suppression" (again translated) in the RAW fine tuning options (and still has the Noise suppression brick).
If you don't have this one too, have you reprocessed your images with Aperture 3? Since it has a new raw engine, it may be the cause of it.
I find it strange that Apple didn't tout the new RAW engine on Aperture 3 new feature, it clearly is an improvement over Digital Camera RAW 2, especially in noise suppression.
I agree the built-in noise suppression is much better than A2, but IMHO it pales in comparison with the Noise Ninja plugin from Picturecode. The key is that you calibrate a profile for Noise Ninja by shooting a color chart full screen on your computer at varying iso settings with each of your cameras. You then feed the images back in to Aperture, and tell Noise Ninja to create a noise profile for each setting. The results are amazingly good.
Now with a lot of new cameras, noise processing is getting less important because the high iso performance is so good....but this is what makes Noise Ninja special...even when the noise adjustment is subtle, because it is working from a profile created with your camera, at the iso the shot was made at, its effects are seamless. They just announced a 64 bit plugin for Aperture 3, so no bouncing into 32 like other plugins at the moment...
Sincerely,
K.J. Doyle

How do reduce the space between the front panel and the display area

I am trying to reduce the space between the front panel and display area but i am not able to reduce the space

A picture would be very helpful in demonstrating what you are having trouble with.
Lacking that, I will guess.
VI Properties >>> Windows Size
lets you define the minimum size of a FP window.
Well that's my guess!
Did I win?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

I have Camera Raw 8.7.1 and I don't have camera raw filter and the radial filter tool

I have Camera Raw 8.7.1 and I don't have camera raw filter or the radial filter tool. Reading on line says it should be available? I am confused... why do I not have these tools?

Because you’re using CS6 not CC.

Gradients and the eye dropper tool

When you're editing a gradient within the shape (as opposed to in the Gradients palette), is there any way to use the eye dropper tool to sample an existing color? In-shape gradient editing (or whatever Adobe calls it) is useless without the eye dropper.

Hi, I came looking for an answer to this very question... but now I have figured out a way to do what you want to do.
1. Select the object you want to make into a gradient and make it so... it'll be the dreaded white to black
2. Select the colour that has the fil that you want to use for one end of the gradient
3. Now Select the gradient and notice that the fill you previously selected is in the "last color" box in the color tab group.
4. Now drag the color from the "last color" box to the gradient color box
5. repeat as necessary... click color, then gradient, then drag the previous colour to the gradient color box.
Hope this helps :-)

How can I remove Navigation Panel and "The section which says Please fill the data"

Hi all,
I need to remove navigation panel on the left side and also
the section which is below toolbar and above actual pdf starts which says " you can fill out the following form and save the data.
Regards
Vas

Not Possible

Remove navigation panel and the section says " you can fill out the following form"

Hi all,
I need to remove navigation panel on the left side and also
the section which is below toolbar and above actual pdf starts which says " you can fill out the following form and save the data.
Can I hide or remove them using JavaScript? How?
Regards
Vas

Not Possible

Adjustment panel and the Targeted Adjustment Tool

Similar Messages

Maybe you are looking for