Admin Console takes forever to save

Hi has anyone else had the issue of the admin console taking ages to save page or web apps etc, bloody annoying. Has only been happening for the last two weeks.
I get the following error
ERROR occured code: 0Message : Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 0

For the European data center in Dublin; I've noticed the 'spinning' processing logo a lot more in the admin area, also my SFTP seems to be a bit more 'hit-n-miss' in connecting and time to upload changes has increased.
I'm putting it down to Adobe doing 'background' things in preparation for final migration later this month.
I'm hoping that once the AWS servers are online that these kind of things will be lessened.
Regards
Mike

Similar Messages

All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

Ok so I'm a design student at a community college (about to graduate soon and will be continuing on getting my BFA) I have all of the creative cloud suite. I have Illustrator, Photoshop, Lightroom, InDesign, etc. Recently I started having problems with all of the programs. Whenever I work in the programs they would run extremely slow. Recently, I tried to save a .eps file that was only about 1.2 GB and it took me an hour to save, and this was when I was working off of my computer desktop. When I place the .eps file in Indesign, everything would go blank and it would freeze up. Also I had an error sign popping up from InDesign saying "out of memory". Im not sure if that is related to my computer's hard drive or indesign itself. I just started using creative suite so the creative suite is pretty new to me. Sometimes in Indesign when I do the Command+w to preview the whole project, it would be completely black and showing nothing and I would hit escape and the whole software screws up. Then I would do a force quit on the software and then Indesign would say there was a serious error and must shut down. That error message has been popping up several times now. I also talked to Apple support and they suggested me doing a Repair disk utility (which I am currently doing right now) and also recommended me contacting Adobe since they know their software. I checked software to see if there is any updates that is needed but everything is up to date. I'm not quite sure why its acting like this so I'm reaching out both to Apple and Adobe to see if both can help me solve the problem. If anybody had experienced this problem before and could help me troubleshoot this issue that would be great.

I installed the creative suite about a year ago, and this just started happening last weekend. I didn't think it would be a problem and that it would last for a day since I was working on InDesign all day and Illustrator and it usually goes away after I finish using the programs. But this has been occurring for about a week now and has not gone away. and yes the other programs are running slow. I was trying to resize some images for a client and Photoshop was acting extremely slow when I was trying to resize the image and also place an image into a 8x10 document in Photoshop. I'm not sure how to find my system specifications.
All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

Numbers and Pages takes forever to save(not responding)

I am having problems with Numbers, it keep presenting the spinning ball of Death to me when saving as does pages. This is also the case for my father..
I am running a Imac with OSX 10.7.2. the Imac is just over a year old, 27in 2.8ghz I5 with 12 gig ram... there should be no reason is take its time saving.. very frustrating..
Any help appreciated

I installed the creative suite about a year ago, and this just started happening last weekend. I didn't think it would be a problem and that it would last for a day since I was working on InDesign all day and Illustrator and it usually goes away after I finish using the programs. But this has been occurring for about a week now and has not gone away. and yes the other programs are running slow. I was trying to resize some images for a client and Photoshop was acting extremely slow when I was trying to resize the image and also place an image into a 8x10 document in Photoshop. I'm not sure how to find my system specifications.
All design programs running extremely slow and takes forever to save and sometimes shuts down randomly?

Why is Premier creating 500mb project files that take forever to save

I started a new project with Arri Amira footage, Premier Pro CC 2014 (not latest update) and it created a huge file of just under 500 mb. granted it has about 2000 clips and the LUT is being added automatically, and the footage is 4k 4444, but still i dont think the project should be so big, no?

I started a new project with Arri Amira footage, Premier Pro CC 2014 (not latest update) and it created a huge file of just under 500 mb. granted it has about 2000 clips and the LUT is being added automatically, and the footage is 4k 4444, but still i dont think the project should be so big, no?

Saving Data back to DB Takes Forever

Hi,
I've created a multithreaded application which reads in data from a Database A (on Sybase Server), performs number crunching on the data, and saves the data to Database B (on SQL Server). I'm using JTDS for the sql server and JConnect (Sybase Drivers) for the Sybase server. The problem is it takes forever to save the data. I think it's getting blocked somewhere but can't seem to figure out where. Here's is a stack dump of the thread which is saving the data:
Thread [Thread-9] (Suspended)
     SocketInputStream.socketRead0(FileDescriptor, byte[], int, int, int) line: not available [native method]
     SocketInputStream.read(byte[], int, int) line: not available
     DataInputStream.readFully(byte[], int, int) line: not available
     DataInputStream.readFully(byte[]) line: not available
     SharedSocket.readPacket(byte[]) line: 841
     SharedSocket.getNetPacket(int, byte[]) line: 722
     ResponseStream.getPacket() line: 466
     ResponseStream.read() line: 103
     ResponseStream.peek() line: 88
     TdsCore.wait(int) line: 3928
     TdsCore.executeSQL(String, String, ParamInfo[], boolean, int, int, int, boolean) line: 1045
     MSCursorResultSet.cursorCreate(String, String, ParamInfo[]) line: 536
     MSCursorResultSet.<init>(JtdsStatement, String, String, ParamInfo[], int, int) line: 154
     JtdsPreparedStatement(JtdsStatement).executeSQLQuery(String, String, ParamInfo[], boolean) line: 424
     JtdsPreparedStatement.executeQuery() line: 777
     CachedRowSetWriter.deleteOriginalRow(CachedRowSet, CachedRowSetImpl) line: not available
     CachedRowSetWriter.writeData(RowSetInternal) line: not available
     CachedRowSetImpl.acceptChanges() line: not available
     CachedRowSetImpl.acceptChanges(Connection) line: not available
     SaveData.saveToDB(PTConnection, CachedRowSet, String) line: 36
     Data_3G(Module).run() line: 61
     worker.run() line: 21
and here is a stack dump of a thread which is waiting on the save data (all other threads -- 10 threads in total -- are at this point:
Thread [Thread-1] (Suspended)
     SaveData.saveToDB(PTConnection, CachedRowSet, String) line: 29
     CDMAVoice(Module).run() line: 61
     worker.run() line: 21
Thanks for the help!

Off hand, I doubt anyone knows a solution to this unique problem, not without actually looking at your code and how your doing threading (but you never know). Why do you need a multithreaded application? Why not one thread, open the first datasource, read in a pile of data into memory (not just one record), close the first datasource , process it, , open the other database and write it out. close that dataSource. Loop until all data is transfered. If all works ok, see if you can change the code to keep both datasources open at the same time before closing them.
I assume your using connection pooling throughout.
Again, off hand, I dont see a multithread application really speeding up the application much, my guess is that the bulk of the waiting is read/writing to the database and not processing. This is just a guess.

HI, I just got a Macbook Pro. It's great but my mail doesn't work at all. It will come up correctly, but take forever to download messages, then won't delete them, then won't save them to folders. Then when I go to quit mail it's like it gets stuck.

HI, I just got a Macbook Pro. It's great but my mail doesn't work at all. It will come up correctly, but take forever to download messages, then won't delete them, then won't save them to folders. Then when I go to quit mail it's like it gets stuck between quitting and not. I have to force quit, then restart my computer if I want to pull up my mail again. How can I fix this?

If you just got your new MBP you have phone support from Apple (which is quite good) call them. 800-692-7753 tell the automated answerer "mail technical support" you'll have human quite quickly. Hope this helps.

Safari 5.1 in Lion takes forever to launch in admin account

Hi,
Safari 5.1 in Lion takes forever to launch in admin account: It launches after 29-30 bounces of the icon in the Dock.
For comparison, in another (guest) user account. Safari launches with just 1 bounce of the icon in the Dock. Any help?

I am having the same problem. Did anyone find any solution?

Portal admin console

We have a problem when we open the portal admin console, we have only one domain, but with many roles, around 11. When we try to open the domain it takes forever, about 10 to 15 minutes before we get all the roles and the others variable/configuration. Why is that????

We have potentially around 1000 user and yes we do have external mapping enable, is the indexing on the directory involve in this type of transaction.
Thank you for the update

It takes forever to print anything...

This just started a little while ago. We have two G4s on a network. Both running 10.3.9. One prints just fine. The other takes forever to print anything. We noticed this printing InDesign docs. So I ran a test using TextEdit. I typed a single word and hit print. It took nearly a minute to print one word.
We have an HP Laserjet 1320N on the network.
Anybody have any idea what could be causing this? Surely it must be a System issue.
Thanks
Joe G.

Hi Joe,
So it gets caught up on the second occasion, suggesting that the OS is not getting the 'all clear' from the printer after the first job. Incidentally, while it is taking forever to print is the (Console.app) system.log writing lots of error messages whilst this is occurring? Please do not post the log, just say if there is log activity occurring.
You could try two things;
1. delete again this file.
~/Library/Preferences/com.apple.print.PrinterProxy.HPLaserjet.plist
then run Repair Permissions from Disk utilities (found in Utilities)
and then in an Administative account open Terminal (found in Utilities) and copy and paste into terminal the command
sudo periodic daily weekly monthly
type in the admin password, (it will type invisibly).
press return and wait, it could take a minute to complete.
and see if that fixes things.
2. If not, then I suggest do a Repair Disk.
To do this: Insert the Install Disk 1 into the drive and then select Restart, then hold down the C key until you hear the chime.
This will take you to the installation software, but you do not want to install.
Select your language, then go up to the top menu bar to First Aid and navigate to the Disk Utilities application.
Select the start up drive, then you click on Repair Disk .
If it finds errors, repeat the process until it reports no errors.
Then run Repair Permissions.
After these repairs, quit the application, and restart normally.
good luck with those procedures.
regards roam

System host name is not recognized in weblogic admin console.

I have a windows 2008 r2 server 64bit on which I installed weblogic 10.3.3, IDM 11g and IAM 11g
Computer name XYZ_123
Full computer name XYZ_123.us.oracle.com
I tried to create a new domain with the IDM config file in oracle_home\bin
I am having issue opening the admin console when I use both
http:\\conputername:7001\console
http:\\Fullcomputername:7001\console
Its loading the login page, but when i provide the credentials, it just stays on the same page.
but works fine when i specify
http:\\localhost:7001\console
I have mapped my computer name in the hosts file too.

Hi,
You can achieve your requirement using the following steps
=======
Option-1
=======
1. Start you weblogic server.
2. Open the console using http://localhost:7001/console
3. Go to the path: Servers -> AdminServer -> Configuration [tab] -> General [sub-tab]
4. In "Listen Address:" give your machine name like
Listen Address: conputername
5. Save the changes and restart the server.
=======
Option-2
=======
1. You can also change it directly from the "config.xml" Path: BEA_HOME/user_projects/domains/Domain_7001/config
2. Search for "<name>AdminServer</name>" in "config.xml"
3. In "listen-address" element (which might be empty at this time) give your machine name like (First take a back-up of config.xml)
<server>
<name>AdminServer</name>
<listen-port>7001</listen-port>
<listen-address>conputername</listen-address>
</server>
4. Save the changes and start the server.
Now you can access the console using (http://conputername:7001/console)
NOTE: "conputername" should be given in your etc/hosts file OR your IP address should be mapped with the "conputername" which your machine name.
Regards,
Ravish Mody
http://middlewaremagic.com/weblogic/
Come, Join Us and Experience The Magic…

Hi Team Admin console not connecting

Hi Team,
I am using sccm2007 sp2 in one of the primary. I am unable to connect admin console getting attached error. Actually one of my team met did the repository rename.. Is it cause issue? if yes. how can i back the track

Previously i able to connect the sccm primary console. now i am not. I checked permission vise everything good..
So that i capture my adminui.log ..
one of my team met done the repository rename in primary server. My question that's y i am not able to connect the sccm server. when i tried to connect in WMI root\sms_sitecode getting error.. can you understand now? or not
There is no getting back the WMI namespace if it was renamed or delete. It is not supported to do this without contact CSS directly for support.
You have two options, Attempt to clean up the mess of renaming the WMI. This might take a while due to the complexity of WMI and the unknowns of what was exactly done.
Call CSS and tell them what exact you have done and get them to work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

HT4623 updated "successfully" to iOS7 on my 4S but now it takes FOREVER to recognize each keystroke - even to type in passcode. also takes forever to type a single key in text. HELP.

updated "successfully" to iOS7 on my 4S but now it takes FOREVER to recognize each keystroke - even to type in passcode. also takes forever to type a single key in text. HELP.

Adjusting the date or time didn't do anything for me either. I'm guessing my two options are to either do the full restore from scratch and not apply any backup ... Or possibly wait for an iOS update that might resolve this issue.
I'm not that much of an avid twitter user that I need it implemented natively in all my devices - so for now I'll probably value all my game save data, internal settings in apps e.t.c. over that functionality (or over the amount of work it would be to get me back to where I am now after a full wipe). I'll see what happens after the next iOS delta update. I'll reevaluate the full wipe after that if the issue hasn't been resolved

Admin console crashes when creating a new program

Recently, .NET 4.5 and Windows 8.1 ADK was installed to update the KMS Host on our server that is shared with the ConfigMgr Primary Site server. Since then, the Admin Console has been crashing every time I try to create a new program on any package
in SCCM (both newly created or existing packages).
smsAdminUILog:
[3][7/07/2014 11:55:07 AM] :Help topic not found in 'HelpTopicLinks.xml' for topic ID: '7e96e251-ed74-4905-87c0-77d082a5fa4d'
[3][7/07/2014 11:56:10 AM] :Property: 'ProgramName'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_Properties()
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object PackageID=XXX00219";
ErrorCode = 2151811598;
File = "c:\\qfe\\nts_sms_fre\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1151;
Operation = "GetObject";
ParameterInfo = "SMS_Program.PackageID=\"XXX00219\",ProgramName=\"Test\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
Event Log:
An error occured in ConfigMgr. The ConfigMgr console will continue to function, however you should save your work and restart the console. After restarting the console, verify that your last configurations have been applied.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.File.Move(String sourceFileName, String destFileName)
at Microsoft.ConfigurationManagement.AdminConsole.SmsTraceListener.SmsTextWriterTraceListener.WriteStringToLog(String message)
at Microsoft.ConfigurationManagement.AdminConsole.SmsTraceListener.SmsTextWriterTraceListener.WriteSmsLogEntry(String source, TraceEventType eventType, TraceEventCache eventCache, Int32 id, String traceMessage)
at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String message)
at Microsoft.ConfigurationManagement.AdminConsole.ExceptionUtilities.TraceException(Exception ex, TraceEventType traceEventType, Int32 eventId, String message)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)
at Microsoft.ConfigurationManagement.AdminConsole.Program.GeneralPageControl.VerifyProgramName()
at Microsoft.ConfigurationManagement.AdminConsole.Program.GeneralWizardPage.get_CanDeactivate()
at Microsoft.ConfigurationManagement.AdminConsole.WizardFramework.WizardForm.OnNext()
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
I tried removing .NET 4.5 and re-installing .NET 4.0, but still crashing.

Hi Tim,
I’m experiencing the same issue, but for me it still crashes as guest. I’m hoping someone will have a suggestion. I’m very new to the flash world (in fact I’m taking a class now and wasn’t able to do my homework), so if you get any responses or discover any useful information please let me know.
Thanks,
Naomi

Painfully slow access to admin console (how can I fix it?)

Hi,
I'm using using Sun Java System Web Server Version 7.0U4 B12/02/2008 02:17 running on CentOS (Redhat EL) release 4.4.
The problem is that using the Admin Console (on port 8989) is painfully slow. It takes minutes for each page to load, but they do usually load.
Any ideas on how to fix that?
There are some other things going on that might be related and helpful to know:
I get certificate errors when I access the Admin Console (e..g, IE complains about a mismatched address). I've tried following the directions to install the certificate in IE7 and FF3, but neither has stopped bothering me about the certificate error.
I have the server behind a firewall which allows all outgoing traffic and select incoming ports to the server. The firewall also maps a public IP address to the server's local IP address (e..g, 10.10.10.8).
If I access the Admin Console locally via the LAN address (https://10.10.10.8:8989) it is no longer slow, but I get booted back to the login screen very frequently (e.g, every minute or two of casual browsing through the console), and I still get the certificate error
We haven't given the server a name, but access it by IP address, and the virtual server configuration in the Admin Console is name "localhost.localdomain"
Any help and suggestions would be greatly appreciated!! I've tried searching for solutions several times, but haven't succeeded.
Thanks,
Tim

Thanks for the thoughts
sriram.natarajan wrote:
The problem is that using the Admin Console (on port 8989) is painfully slow. It takes minutes for each page to load, but they do usually load.
Any ideas on how to fix that?
sounds more like some network issues. are you running your browser on your centos 4.4 as well ? also, did you try to connect using your IP - some thing like https://<ip>:8989 ?
No, we're not running the browser on centos 4.4. We're runing browsers on laptops, connecting both offsite via public IP address and in the office via both the public IP address and the LAN ip address.
Yes, we're using the ip address as you demonstrated. This machine does not have a domain name attached, so we only connect via ip addresses (mapped public or LAN)
>>
I get certificate errors when I access the Admin Console (e..g, IE complains about a mismatched address). I've tried following the directions to install the certificate in IE7 and FF3, but neither has stopped bothering me about the certificate error.it is not a certificate error. web server 7 admin server uses a self signed certificate . this is necessary step. however, IE reports a warning when it sees a self signed certificate. it wants you to know that it does not understand who sent this certificate. you need to create an exception - saying that you know what you are doing then there won't be any certificate error ..Okay, I'll look for how to do that, but so far I've only found instructions for how to install the certificate in the browsers, and unfortunately, that hasn't made a difference.
>>
I have the server behind a firewall which allows all outgoing traffic and select incoming ports to the server. The firewall also maps a public IP address to the server's local IP address (e..g, 10.10.10.8).
sounds like some network misconfiguration - outside the scope of this forum.I cannot rule that out, but other servers/websites seem to work fine with this same setup. Although, only this server is using https
>
If I access the Admin Console locally via the LAN address (https://10.10.10.8:8989) it is no longer slow, but I get booted back to the login screen very frequently (e.g, every minute or two of casual browsing through the console), and I still get the certificate error
if you want to increase this time out, you could do so by manually editing <install-root>/lib/webapps/admingui/WEB-INF/web.xml and change the value for session-timeout to say 600 (for 10 minutes).. . pl . note that this is not a supported way and you could potentially leave others to use your session if you are careless. but, if you know what you are doing .Thanks I did that. It surprises me that the default timeout appears to be 1 minute.

Quicktime videos take forever to load on my system

Is it me alone, or does anyone have the same problem? I have a excellent system, and nothing takes forever to load on it, only Quicktime videos. The only reason why I use quicktime on my XP machine is to watch the videos that are downloaded from my Kodak camera memory card since the camera saves its video files as quicktime videos, but it takes forever for the video files to load after I have downloaded them and saved them into a folder on my system. When I want to go back and view the videos, the folder freezes until all the videos, even if it is only one video in the folder loads. Why is that? Other video files load immediatley from avi,wmv,to divx,etc.
Does anybody have a solution?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Admin Console takes forever to save

Similar Messages

Maybe you are looking for