Administrate remote java systems
Hi everybody,
I want to administrate several java systems in my central nwa. All installer templates have run successfully and the settings for sld seem to be okay. I made all necessary steps of "Monitoring Setup Guide für SAP NetWeaver 7.0 (2004s) SPS 13" But when i log on nwa i get these warnings:
- System Landscape Directory is not accessible.
- Local System Only can be administrate.
Any ideas what can be missing?
Regards, Mirko
Hi, Mirko.
1. Start the Visual Administrator, and log on as a J2EE Engine administrator.
2. In the navigation bar, choose Cluster -> Server -> Services -> SLD Data Supplier -> Runtime, and enter the connection data for the SLD on the HTTP Settings tab page.
3. Choose the CIM Client Generation Settings tab page, and activate the following entries in the list:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/sap.comtclmwebadminmainframe~wd.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/sap.comtclmwebadminsld~wd.jar
4. Ensure that the SLD connection data is entered on this tab page, and save your entries by choosing Save.
5. Activate the data transfer to the SLD.
Regards, Nick.
Similar Messages
-
SLD Communication between Remote ABAP & JAVA system through WebDispatcher
Hi All,
We are having the listed requirement at one of my Client.
We want to register Remote ABAP system into Remote SLD of JAVA system. Both SAP systems are located in different regions.The SLD is local to the remote JAVA system. The ultimate objective is to create JCO Destinations in Remote JAVA system using the Entries of its Local SLD and to run some WebDynpro Application to access Data from Remote ABAP system.
We have already setup the above mentioned same scenario between Remote ABAP Dev and Remote Poratl DEV systems with the help of their Direct Live IP communciation. The setup is working fine, as both systems are accessing each other using Direct Live IPs in both directions on ports 3200, 3300, 50000....
But in Portal PRD scenario, the Cleint's Enterprise Portal is accessed through SAP Webdispatcher. The User Access Request of PRD Portal is first captured at SAP Webdispatcher and then the requrest is redirected to the J2ee Application Servers based on Load balancing. So in this PRD scenario, how we can establish such SLD communication setup between Remote ABAP and JAVA systems in both directions via SAP WebDispatcher.
One of the option may be to use SAP Gateway of Portal Development, whcih is accessed through Live IP and register Remote ABAP system to Poral PRD system (by maintaining SLD entriy in SLDAPICUST T-code). I don't know weather such communication will work or not ..as it may require SLD Bridge configuration from Portal DEV to Portal PRD... may be... and may be to enable some portal communcaitons on Ports 3300, 50000 (Java Side), 3200, (ABAP side) ...
Or
at SAP Webdispather host (which is accessed first for Portal PRD requests..), the Standalone gateway needs to be setup to establish such SLD communication ?
I am confused abt the final setup of the above mentioned SLD setup. So requesting you to provide possible options/suggestions for the same.
Regards,
Bhavik G. ShroffHi,
I would suggest you to install standalone gateway between portal and your PRD system. Register portal host and gateway in the SLD and same enter in RZ70 on your PRD system. As a result both will be able to communicate with each other.
Thanks
Sunny -
Unable to create a jco destination using remote AS Java system on myjava sy
Dear SAP Gurus,
I had ce 7.1 and nw 2004s based AS java Systems.I want to create a jco destination in my CE 7.1 system using usermapping data of nw 2004s for jco communication.So i created a AS Java system of NW2004s in my CE 7.1 SLD .when i try to create a jco destination using the AS JAVA as Nw2004s system it is not creating .Please help me to solve this issue.
regards,
vanamaSanthosh.Hi vanamaSanthosh
try this
1. In your CE1 System where u define your JCO destination, Go to C:\WINDOWS\system32\drivers\etc
open hosts file and define the identity of AS System like <IP address> <name of the system>
for example 159.858.2.45 abcd
restart the server and then check.
Best Regards
Satish Kumar -
How to access JDBC Resource registered in Sun Java System App Server ?
I want to create a stand-alone JDBC application with Java SE using Swing technologies and JNDI technology. The purpose of using JNDI technology is to avoid change of Java Source Code every time I move the database to different location. This Java application will be used in a standalone PC installed with Windows XP Professional with no LAN / WAN connection. Of course, Internet connection is available with the PC.
I use JavaDB to store the data tables and the location of the database is D:\E-DRIVE\SAPDEV. Tomorrow, if I move this database to C:\SAPDEV or any network drive, I do not want to change the Java Source code. I want to use JNDI which, if I am not wrong, helps developers to avoid manual change of Java source code whenever the database location is changed. Changes have to be made only in the JNDI Name which contains all relevant information about the database in order to get connection no matter where the database SAPDEV is stored; it can be placed under D:\E-DRIVE directory or C:\ directory of the hard disk. To implement my intention, I started developing Java application as per the steps mentioned below:
Step 1:
To proceed, first, I sought the help of Sun Java System Application Server Admin Console. I created JNDI object for Connection Pool using the menu path Common Tasks->Resources->JDBC->Connection Pools.
JNDI Name : ABAPRPY
Resource Type : javax.sql.DataSource
Datasource class : org.apache.derby.jdbc.ClientDataSource
Description : ABAP Program Repository
The Connection Pool creation has options for General, Advanced and Additional Settings tabs and I made all the settings relevant to the database I created in D:\E-DRIVE\SAPDEV.
To confirm whether the above settings are correct, I pressed the Ping push button which is available in the General tab of the connection pool creation screen. The system responded with the message Ping Succeeded.
Step 2:
I created a JDBC Resource using the menu path Common Tasks->Resources->JDBC->JDBC Resources.
JNDI Name : jdbc/SAPDEV
Pool Name : ABAPRPY
Description : Database Connection for SAPDEV database
Status : Enabled
I can see all the above settings recorded in the domain.xml which is placed in the folder
C:\Sun\AppServer\domains\domain1\config
Step 3:
I have made sure that Sun Java System Application Server is up and running in the background with JavaDB server. I created a Java Program making sure the following JAR files are included in the classpath:
appserv-admin.jar
appserv-ee.jar
appserv-rt.jar
javaee.jar
fscontext.jar
Plus, the lib directory of JDK 1.6 & C:\Sun\AppServer\domains\domain1\config
Source code of the program is as follows: I used NetBeans IDE to create my project file.
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.naming.*;
import javax.activation.DataSource;
public class JNDILookup {
public static void main(String[] args) {
try {
InitialContext initCtx = new InitialContext();
DataSource ds = (DataSource) initCtx.lookup("java:comp/env/jdbc/sapdev>");
} catch (NamingException ex) {
Logger.getLogger(JNDILookup.class.getName()).log(Level.SEVERE, null, ex);
When I attempted to compile the above program in NetBeans IDE ,no compilation error reported. But while executing the program, I got the following run-time error message:
SEVERE: null
javax.naming.NameNotFoundException: No object bound for java:comp/env/jdbc/sapdev> [Root exception is java.lang.NullPointerException]
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:224)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:396)
at javax.naming.InitialContext.lookup(InitialContext.java:392)
at SAPConnect.JNDILookup.main(JNDILookup.java:21)
Caused by: java.lang.NullPointerException
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:173)
... 3 more
Now, I want to come out of this situation; at the same time, I want to preserve the settings I have made in the Sun Java System Application Server Admin Console. That is, I want to programmatically access the data source using Connection Pool created in Sun Java System Application Server Admin Console.
I request dear forum members to provide me an appropriate solution.
Thanks and regards,
K. Rangarajan.jay44 wrote:
Bare in mind I am attempting the context.lookup() from inside the container (my code is in a session bean). I have accessed the server and have my bean "say hello" first to verify the bean works OK, then I call a method with this rather standard code:
String jndiDataSourceName ="Second_EJB_Module_DataBase";
Logger.getLogger(DynamicPU.class.getName()).log(Level.INFO,"Programatically acquiring JNDI DataDource: "+ jndiDataSourceName);
InitialContext ctx;
try {
ctx = new InitialContext();
ds =(DataSource)ctx.lookup("java:comp/env/jdbc/"+jndiDataSourceName);
} catch (NamingException ex) {
Logger.getLogger(DynamicPU.class.getName()).log(Level.SEVERE, null, ex);
return "Exception generated trying to preform JDBC DataSource lookup. \n"+ex.toString();
But when I run the code the server log shows the initial context is created Ok, but an exception is thrown becasue the resource name is not found:
(and i have tried vriations of ctx.lookup("jdbc/"+jndiDataSourceName) etc etc
You are fine here. It works in container because the InitialContext properties have been supplied already. That was the link I forwarded earlier. The InitialContext you create locally needs to locate the container JNDI. That is what the properties specify.
Where I am confused is where you indicate the stack below is from the server log. So, you initiate a standalone (java main method) application, create an InitialContext, and you see the results in your app server log?
LDR5010: All ejb(s) of [EJB_Module_1] loaded successfully!
Programatically acquiring JNDI DataDource: Second_EJB_Module_DataBase
The log message is null.
javax.naming.NameNotFoundException: Second_EJB_Module_DataBase not found
at com.sun.enterprise.naming.TransientContext.doLookup(TransientContext.java:216)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:188)
at com.sun.enterprise.naming.TransientContext.lookup(TransientContext.java:192)...
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
This is strange since I can see this resource (a JDBC connection named Second_EJB_Module_DataBase) is configured on the server from the server's admin console.
That is why you can obtain a lookup from within the container (app server).
For this lookup to work it may be that one must map the name inside an ejb-jar.xml deployed with the application, but I have also read some resources like jdbc connection should have a default name. Does anyone know if my lookup() should work without using an ejb-jar.xml mfile to explcitly map the reource for my application?
Both EBJ's and data sources can be referenced via JNDI. It's a remote lookup (that is normally optimized if it is running in the same JVM). You should not have any dependencies on a JDBC data source being set-up on ejb-jar.xml. That file can of course impact your EJB's. However, data sources are normally set-up on a container-specific basis (e.g., you probably did it through a console, but there is a spec somewhere about how to set up a data source via a resource the app server looks for; it varies from app server to app server). However, once you have that container-specific data source set-up, JNDI operates vendor-neutral. You should be able to take the code above and move it to JBoss or Weblogic or Tomcat or whatever (this is an ideal, in practice, the vendors sometimes put a data source in a name you would not expect, but again, you can use their JMX console to see what the JNDI name is).
(As I stated above if I have to use a deployment discriptor to get at this JNDI datasource, then solution is not "programmatic" as newly configured datasources could not be accessed without redeploying the entire application).
As JSchell alluded to, you will always have at least something vendor-specific. JNDI itself (the code you wrote) is totally portable. However, you have to set the various JNDI environment properties to a given vendor's spec. Ideally, you should not need a vendor's actual InitialContext application, but it's a possibility. Once you can safely cast to Context, you should be vendor-neutral (if not, demand your money back).
So that is exactly where I am stuck, trying to get the lookup to work and wondering if it should work without and xml file mapping the resource for my app.
What we ended up doing for standalone was to provide our own JNDI. If you look at the open source project JOTM, there are examples on how to use that with XBean (if integrating with Spring, as we did), you can easily set up a data source that runs standalone exactly as you get in the container. Another benefit is you get full JTA/JTS support and the ability to run XA transactions. (This might all be alphabet soup, but the app server gives it to you, and this is the way we ended up doing the same: JNDI + JTA + JTS + XA). It ends up the same application code uses a "vanilla" InitialContext and all we have to do is write one or two xml files (one for our app server, a couple for JOTM), and our actual code works the same.
I still think you have a shot at getting to the container's JNDI, just not using their full-blown app server JAR.
I think there must be a simple way to do this with an ejb-jar.xml, I am no expert in JNDI, I could be missing something simple, I will keep at it and post an answer here if I come up with it.
Thanks, jayIt is simple to code. Getting it to integrate with your app server, yes, that can be challenging. But it has nothing to do with EJB's. Write a simple test. Using nothing but DataSource and InitialContext. Let us know where you get stuck.
- Saish -
Can't deploy my app on Sun Java System Application Server Platform Edition
Hi,
I am trying to deploy me app on the Sun's app server but I get the following error:
I am using Sun Java System Application Server Platform Edition 8.2
Invalid Deployment Descriptors in archive jag-ejb.jar in deployment descriptor file META-INF/ejb-jar.xml
Line 29 Column 15 -- The content of element type "session" must match
"(description?,display-name?,small-icon?,large-icon?,ejb-name,home?,remote?,local-home?,local?,ejb-class,session-type,transaction-type,env-entry*,ejb-ref*,ejb-local-ref*,security-role-ref*,security-identity?,resource-ref*,resource-env-ref*)". "It deploys on Orion 2.02
The ejb.xml file is as follows:
<enterprise-beans>
<session>
<display-name>Facade stateless session bean</display-name>
<ejb-name>ejb/PetardsFacade</ejb-name>
<home>com.jag.petardscmsbeans.interfaces.PetardsFacadeHome</home>
<remote>com.jag.petardscmsbeans.interfaces.PetardsFacade</remote>
<local-home>com.jag.businesslogic.interfaces.FacadeLocalHome</local-home
><local>com.jag.businesslogic.interfaces.FacadeLocal</local>
<ejb-class>com.jag.petardscmsbeans.ejb.PetardsFacadeEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/OracleDSRES</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
<env-entry>
<env-entry-name>DSName</env-entry-name>
<env-entry-type>java.lang.String</env-entry-type>
<env-entry-value>jdbc/OracleDSRES</env-entry-value>
</env-entry>
</session>
</enterprise-beans>also, in the error message what does ? and * signify?
ThanksThis is an element ordering issue. env-entry is before resource-ref in the schema so it must be declared in the same order.
--ken -
Sun Java System Application Server 9.1 errors
Hi
Please asiste me ,I am getting this errors from :
|WARNING|sun-appserver9.1|javax.enterprise.resource.resourceadapter|_ThreadID=29;_ThreadName=Timer-31;orcale_sage_live;Connection could not be allocated because: Io exception: Socket is not connected;Error while Resizing pool orcale_sage_live. Exception : Connection could not be allocated because: Io exception: Socket is not connected|#]Alos IO:Network adapter could not establish connection
Thanks,PAulramiro wrote:
Hi, im not able to deploy derby.war from derby 10.4.1.3, as indicated in the Derby Server and Administration Guide, using Sun Java System Application Server 9.1 Update 2.Best I can guess is that you are attempting to remotely install derby.
That is a pretty specific question and I suspect there is a specific derb forum as well.
As a guess you probably failed to follow the docs on pre-reqs. -
How deploy the EJB in security on the Sun Java System Application Server 9?
I hava deploied a simple Hello EJB Object on PE 9(Sun Java System Application Server Platform Edition 9). I can use this EJB object without user name an password On any client. See the following code section:
public static void main(String[] args) {
try{
Properties props = System.getProperties();
props.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.enterprise.naming.SerialInitContextFactory");
props.put(Context.PROVIDER_URL,"iiop://localhost:3700");
Context ctx = new InitialContext(props);
Hello h = (Hello) ctx.lookup("ejb/test/Hello");
System.out.println(h.sayHello());
}catch(Exception e){
e.printStackTrace();
Please tell me how deploy the EJB in security on the Sun Java System Application Server 9? So that, The client must set the user name and password when lookup the ejb object. Like the following:
props.put(Context.SECURITY_PRINCIPAL,"admin")
props.put(Context.SECURITY_CREDENTIALS,"1234");Guys,
I too have the same issue. If anyone has an answer, please let me know.
Is this GlassFish problem? or Prgram issue?
Find below the source code
package TransactionSecurity.bean;
import javax.annotation.Resource;
import javax.annotation.security.DeclareRoles;
import javax.annotation.security.PermitAll;
import javax.annotation.security.RolesAllowed;
import javax.ejb.Remote;
import javax.ejb.SessionContext;
import javax.ejb.Stateless;
import javax.ejb.TransactionAttribute;
import javax.ejb.TransactionAttributeType;
@Stateless
@Remote(TSCalculator.class)
@DeclareRoles({"student", "teacher"})
public class TSCalculatorBean implements TSCalculator {
private @Resource SessionContext ctx;
@PermitAll
// @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
public int add(int x, int y) {
System.out.println("CalculatorBean.add Caller Principal:" + ctx.getCallerPrincipal().getName());
return x + y;
@RolesAllowed( { "student" })
public int subtract(int x, int y) {
System.out.println("CalculatorBean.subtract Caller Principal:" + ctx.getCallerPrincipal().getName());
System.out.println("CalculatorBean.subtract isCallerInRole:" + ctx.isCallerInRole("student"));
return x - y;
@RolesAllowed( { "teacher" })
public int divide(int x, int y) {
System.out.println("CalculatorBean.divide Caller Principal:" + ctx.getCallerPrincipal().getName());
System.out.println("CalculatorBean.divide isCallerInRole:" + ctx.isCallerInRole("teacher"));
return x / y;
package TransactionSecurity.bean;
import javax.ejb.Remote;
@Remote
public interface TSCalculator {
public int add(int x, int y);
public int subtract(int x, int y);
public int divide(int x, int y);
package TransactionSecurity.client;
import java.util.Properties;
import javax.ejb.EJBAccessException;
import javax.naming.Context;
import javax.naming.InitialContext;
import TransactionSecurity.bean.TSCalculator;
public class TSCalculatorClient {
public static void main(String[] args) throws Exception {
// Establish the proxy with an incorrect security identity
Properties env = new Properties();
env.setProperty(Context.SECURITY_PRINCIPAL, "kabir");
env.setProperty(Context.SECURITY_CREDENTIALS, "validpassword");
env.setProperty(Context.INITIAL_CONTEXT_FACTORY,"com.sun.appserv.naming.S1ASCtxFactory");
env.setProperty(Context.PROVIDER_URL,"iiop://127.0.0.1:3700");
env.setProperty("java.naming.factory.initial","com.sun.enterprise.naming.SerialInitContextFactory");
env.setProperty("java.naming.factory.url.pkgs","com.sun.enterprise.naming");
env.setProperty("java.naming.factory.state","com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl");
env.setProperty("org.omg.CORBA.ORBInitialHost", "127.0.0.1");
env.setProperty("org.omg.CORBA.ORBInitialPort", "3700");
InitialContext ctx = new InitialContext(env);
TSCalculator calculator = null;
try {
calculator = (TSCalculator) ctx.lookup(TSCalculator.class.getName());
} catch (Exception e) {
System.out.println ("Error in Lookup");
e.printStackTrace();
System.exit(1);
System.out.println("Kabir is a student.");
System.out.println("Kabir types in the wrong password");
try {
System.out.println("1 + 1 = " + calculator.add(1, 1));
} catch (EJBAccessException ex) {
System.out.println("Saw expected SecurityException: "
+ ex.getMessage());
System.out.println("Kabir types in correct password.");
System.out.println("Kabir does unchecked addition.");
// Re-establish the proxy with the correct security identity
env.setProperty(Context.SECURITY_CREDENTIALS, "validpassword");
ctx = new InitialContext(env);
calculator = (TSCalculator) ctx.lookup(TSCalculator.class.getName());
System.out.println("1 + 1 = " + calculator.add(1, 1));
System.out.println("Kabir is not a teacher so he cannot do division");
try {
calculator.divide(16, 4);
} catch (javax.ejb.EJBAccessException ex) {
System.out.println(ex.getMessage());
System.out.println("Students are allowed to do subtraction");
System.out.println("1 - 1 = " + calculator.subtract(1, 1));
}The user kabir is created in the server and this user belongs to the group student.
Also, I have enabled the "Default Principal To Role Mapping"
BTW, I'm able to run other EJB3 examples [that does'nt involve any
security features] without any problems.
Below is the ERROR
Error in Lookupjavax.naming.NamingException: ejb ref resolution error for remote business interfaceTransactionSecurity.bean.TSCalculator [Root exception is java.rmi.AccessException: CORBA NO_PERMISSION 0 No; nested exception is:
org.omg.CORBA.NO_PERMISSION: ----------BEGIN server-side stack trace----------
org.omg.CORBA.NO_PERMISSION: vmcid: 0x0 minor code: 0 completed: No
at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.handle_null_service_context(SecServerRequestInterceptor.java:407)
at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.receive_request(SecServerRequestInterceptor.java:429)
at com.sun.corba.ee.impl.interceptors.InterceptorInvoker.invokeServerInterceptorIntermediatePoint(InterceptorInvoker.java:627)
at com.sun.corba.ee.impl.interceptors.PIHandlerImpl.invokeServerPIIntermediatePoint(PIHandlerImpl.java:530)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.getServantWithPI(CorbaServerRequestDispatcherImpl.java:406)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:224)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
----------END server-side stack trace---------- vmcid: 0x0 minor code: 0 completed: No]
at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:425)
at com.sun.ejb.containers.RemoteBusinessObjectFactory.getObjectInstance(RemoteBusinessObjectFactory.java:74)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:403)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at TransactionSecurity.client.TSCalculatorClient.main(TSCalculatorClient.java:35)
Caused by: java.rmi.AccessException: CORBA NO_PERMISSION 0 No; nested exception is:
org.omg.CORBA.NO_PERMISSION: ----------BEGIN server-side stack trace----------
org.omg.CORBA.NO_PERMISSION: vmcid: 0x0 minor code: 0 completed: No
at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.handle_null_service_context(SecServerRequestInterceptor.java:407)
at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.receive_request(SecServerRequestInterceptor.java:429)
at com.sun.corba.ee.impl.interceptors.InterceptorInvoker.invokeServerInterceptorIntermediatePoint(InterceptorInvoker.java:627)
at com.sun.corba.ee.impl.interceptors.PIHandlerImpl.invokeServerPIIntermediatePoint(PIHandlerImpl.java:530)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.getServantWithPI(CorbaServerRequestDispatcherImpl.java:406)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:224)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
----------END server-side stack trace---------- vmcid: 0x0 minor code: 0 completed: No
at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:277)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:205)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:152)
at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:225)
at com.sun.ejb.codegen._GenericEJBHome_Generated_DynamicStub.create(com/sun/ejb/codegen/_GenericEJBHome_Generated_DynamicStub.java)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:372)
... 5 more
Caused by: org.omg.CORBA.NO_PERMISSION: ----------BEGIN server-side stack trace----------
org.omg.CORBA.NO_PERMISSION: vmcid: 0x0 minor code: 0 completed: No
at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.handle_null_service_context(SecServerRequestInterceptor.java:407)
at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.receive_request(SecServerRequestInterceptor.java:429)
at com.sun.corba.ee.impl.interceptors.InterceptorInvoker.invokeServerInterceptorIntermediatePoint(InterceptorInvoker.java:627)
at com.sun.corba.ee.impl.interceptors.PIHandlerImpl.invokeServerPIIntermediatePoint(PIHandlerImpl.java:530)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.getServantWithPI(CorbaServerRequestDispatcherImpl.java:406)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:224)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
----------END server-side stack trace---------- vmcid: 0x0 minor code: 0 completed: No
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.MessageBase.getSystemException(MessageBase.java:913)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(ReplyMessage_1_2.java:131)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(CorbaMessageMediatorImpl.java:685)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(CorbaClientRequestDispatcherImpl.java:472)
at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:363)
at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:219)
at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:192)
... 13 moreAny help is appreciated.
Regards!
Nithi.
Edited by: EJB3 on Aug 17, 2008 8:17 PM -
Schedule Backup in Web AS Java System
Hi
Can anybody tell me how to schedule DBA Activities (Like Database, Archive Log Backup) on SAP Java System as we do in ABAP System through T Code DB13 or DBACOCKPIT
Regards
Soumya DasguptaHi Warren
Thanks for your reply. I have followed that Notes. But I got stucked in the middle. Actually I am trying to connect our EP System (Which in a Java System only) to the ECC System (ABAP) for scheduling Backup Jobs and other DBA Activities through DBACOCKPIT. I am trying to add Remote System from the dbacockpit -> System Configuration -> Add Systems as follows
1. System : SID of the Remote System
2. Select Database Connection under the Remote System -> Create
3. Connection Name : Oracle
4. Database System : Oracle
5. User Name and Password : Oracle User Name and Password of Remote System
In DB Configuration Under Parameter I have given the TNS Name of of the Remote Database System.
Can you please validate the above details. Because after saving this enties I cannot run a successful test. Error : ORA-12154: TNS:could not resolve the connect identifier specified.
Pleaes help
Regards
Soumya Dasgupta -
BW 3.5 over ABAP+JAVA system homogeneus copy
Hello Gurus,
I making a BW homogeneus copy to other hardware (i want change the hardware).
I check the WAS Abap and WAS java homogeneus copy guide, but i am really confused.
I think follow this steps:
1.- Install central instance ABAP (only WAS ABAP)
2.- install DB instance ABAP
3.- restore de BD
4.- export JAVA ADD-in in source system
5.- import JAVA ADD-in in target system
6.- post processing
I dont know if after step 2 I must install the Java ADD-in in target system ( the BW system is over ABAP+JAVA system).
or the import java add-in install the java component?
Regards,
Ernesto.Hello Ernesto,
There are two ways to perform the system copy
1. Database Specific
2. Database independent
I beleive you are trying to do Database Independent system copy that is by creating export cd of source database and use them for system. For your environment which is WINDOWS + MSSQL on 6.40 SR1.
Please refer to documents
Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS ABAP 6.40 SR1
Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS Java 6.40 SR1
To answer your original question, You install the Java Add-In using the Java export on Target System. I have summarized the process flow below
From document "Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS Java 6.40 SR1
check section 4.2 Database-Independent System Copy (Jload Procedure)
Process Flow for the Source System (Java Add-in)
On Source System: Windows
1. You run SAPinst to perform the Java export [page 64].
We recommend that you perform the export as a test run before you perform a productive run. Deselect the option Stop J2EE cluster before export on the screen Java System > Database Export when running SAPinst for a test run.
2. You run SAPinst to perform the ABAP export as described in the documentation Homogeneous and Heterogeneous System Copy for SAP Systems based on Web AS ABAP 6.40 SR1.
3. If required, you can run the SAPinst GUI in standalone mode to perform a remote system copy [page 86].
On Target System: Windows
1. You perform the ABAP import as described in the documentation Homogeneous and Heterogeneous System Copy for SAP Systems based on Web AS ABAP 6.40 SR1.
3. For more information, see Running SAPinst on Windows [page 64].
4. Java import: You install the Java Add-In using the Java export.
You must check the documentation Installation Guide u2013 SAP NetWeaver u201904 SR1 Java on <your OS> : <your database>, Part II u2013 Installation and Post-Installation for details concerning the installation of your database that cannot be covered by this documentation.
a. Central System: You run SAPinst to install the target system and perform the import [page 64].
Hope this helped you let me know if you still have concerns.
Thank you,
Praveen -
Sun Java System Application Server 8.0
after succesfull installing of application server when i give URL in browser http://localhost:8080 its shows me blank screen in browser
but when i check in log i get this error message..
while runnig this server rest all server are stopped and i have assign port 8080 for this server only..
sun-appserver-pe8.0.0_01|org.apache.coyote.tomcat5.CoyoteAdapter|_ThreadID=11;|An exception or error occurred in the container during the request processing
java.lang.NoSuchMethodError: javax.servlet.http.HttpServletRequest.getLocalPort()I
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:138)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
at java.lang.Thread.run(Thread.java:534)Hi,
On a similar note, I am able to install Sun Java System Application Server 8 but I am getting following error while applying asadmin start-domain --verbose domain1 to start the default domain. I am pasting the relevant section of log file below. Can someone please help me correct the issue? Thanks-in-advance!
[#|2009-09-16T23:44:36.203-0700|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|Service [email protected] cannot be started! : com.sun.appserv.server.ServerLifecycleException: Cannot bind to URL [rmi://Ashesh.gateway.2wire.net:8686/management/rmi-jmx-connector]: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: Ashesh.gateway.2wire.net; nested exception is:
java.net.ConnectException: Connection refused: no further information]|#]
[#|2009-09-16T23:44:36.203-0700|SEVERE|sun-appserver-pe8.2|javax.enterprise.system.core|_ThreadID=10;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: Cannot bind to URL [rmi://Ashesh.gateway.2wire.net:8686/management/rmi-jmx-connector]: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: Ashesh.gateway.2wire.net; nested exception is:
java.net.ConnectException: Connection refused: no further information]
at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onStartup(JmxConnectorLifecycle.java:104)
at com.sun.enterprise.server.ApplicationServer.onStartup(ApplicationServer.java:300)
at com.sun.enterprise.server.PEMain.run(PEMain.java:294)
at com.sun.enterprise.server.PEMain.main(PEMain.java:220)
Caused by: java.io.IOException: Cannot bind to URL [rmi://Ashesh.gateway.2wire.net:8686/management/rmi-jmx-connector]: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: Ashesh.gateway.2wire.net; nested exception is:
java.net.ConnectException: Connection refused: no further information]
at javax.management.remote.rmi.RMIConnectorServer.newIOException(RMIConnectorServer.java:814)
at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:431)
at com.sun.enterprise.admin.jmx.remote.server.JmxConnectorServerDriver.startConnectorServer(JmxConnectorServerDriver.java:177)
at com.sun.enterprise.admin.server.core.JmxConnectorLifecycle.onStartup(JmxConnectorLifecycle.java:95)
... 3 more
Caused by: javax.naming.ServiceUnavailableException [Root exception is java.rmi.ConnectException: Connection refused to host: Ashesh.gateway.2wire.net; nested exception is:
java.net.ConnectException: Connection refused: no further information]
at com.sun.jndi.rmi.registry.RegistryContext.bind(RegistryContext.java:122)
at com.sun.jndi.toolkit.url.GenericURLContext.bind(GenericURLContext.java:208)
at javax.naming.InitialContext.bind(InitialContext.java:359)
at javax.management.remote.rmi.RMIConnectorServer.bind(RMIConnectorServer.java:635)
at javax.management.remote.rmi.RMIConnectorServer.start(RMIConnectorServer.java:427)
... 5 more -
ColdFusion compatibility with Sun Java System Application Server
Background: A vendor that is doing a project for our
department told us that ColdFusion MX 6.1 is not compatible with
Sun Java System Application Server Enterprise Edition 8.1 and
beyond. Since we are migrating our server environment to this
release of Sun Java System Application Server Enterprise Edition,
we face a difficult situation in that our ColdFusion applications
will no longer run. Thus, we would like Adobe to answer a couple
questions which will help us determine what course of action we
ought to take.
Q: Will applications we developed using ColdFusion MX 6.1 run
on Sun Java System Application Server Enterprise Edition 8.1? Below
is a detailed description of the Sun Java System Application Server
Enterprise Edition we intend to migrate to.
Q: Is Adobe aware of any compatibility issues with this
configuration?
Q: What is Adobe's support commitment regarding future
releases of ColdFusion MX and Sun Java System Application Server
Enterprise Edition? Does Adobe intend to continue support this
environment?
Configuration: Sun Java System Application Server Enterprise
Edition 8.1_02 (build b24-p11)
Below is the specification levels for the 8.1 server
(J2EE1.4), note it can use J2SE 1.4.2_06 or 5.0 as the JAVA
runtime.
J2EE 1.4 compatible
Components: J2SE 1.4.2_06 or J2SE 5.0
Application and Application Client
Enterprise JavaBeans (EJB) 2.1
Java Servlet 2.4
JavaServer Pages(JSP) 2.0
J2EE Connector Architecture 1.5
JMX 1.2
JMS 1.1
Java Naming and Directory Interface (JNDI) 1.2
and Java Transaction API (JTA) 1.0
Web Services:Java Web Services Developer Pack 1.5
Java APIs for XML Registries (JAXR) 1.0
Java API for XML-based Remote Procedure Calls (JAX-RPC) 1.1
SOAP With Attachments API for Java (SAAJ) 1.2
WS-I Basic Profile 1.0
Other:J2EE Deployment 1.1
J2EE Management 1.0
Java API for XML Processing (JAXP) 1.2
JavaMail 1.3
Java Authentication and Authorization Service (JAAS) 1.0
Java Authorization Contract for Containers (JACC) 1.0First of all, is there a reason why you are using jRockit?
Since the issue appeared after upgrading the windows, the issue would potentially be in the interaction between JVM and OS.
Also, there were some issues related to memory leak that were fixed in AS 8.2.
May be you should try with a Sun JVM and AS 8.2. -
Hello Everybody!
I had been assigned a project on Remote Monitoring System. In this I have to develop a Software in which I can put my software on the server and can put a check on the client side. As well I can communicate with the client by normal messages and by voice messaging. The administrator could be able to have a total control on the client. My project guide had sugested to go for VC++. But I want to ahead with Java.
So if anybody can help me out how to proceed in Java.Lots of ways to proceed.
One of the easier ways would be to write two programs (client and server) that use sockets to communicate.
I'd write it something like this:
Server listens for UDP (Datagram) packets on port X.
Client sends a packet to server port X, and listens on port Y using ServerSocket.
Server receives packet and connects to client port Y using Socket.
They exchange information.
Once the server knows who the client is (from the UDP packet), you can arrange any other streams you want, including streaming voice data and text messages.
Look at the java.net classes for a starting point. -
In ABAP+Java system installation
Hi,
I installed ABAP+Java system On that i installed XI 3.0 SR1.I after applying the J2EERTOS11_0-20000118.SAR patch on J2EE engine.This patch consist of lot of bugs.I just stopped the installation of patch.After again when i log on to J2EE engine with port 50000.Its showing no page dispaly on localhost.I checked the J2EE instance.J2EE instance running properly.Even i can't log in to SDM and J2EE administartor.
Before patching I can able to log in.But now its loging failing.
May be the error is at 50000 port.I installed everything on one Central instance.
Need urgent reply.Hello,
i think that you want to patch your j2ee-server. Therefore you have to download four parts for PATCH SP11.
Support Packages and Patches > SAP NetWeaver > SAP NETWEAVER SAP NETWEAVER 04 > Java Server:
J2EERT11_0-10001982.SAR (Part 4/4)
SAPINST10_0-20000118.SAR
J2EERTOS11_0-20000118.SAR
CTRL<database>11_0-20000118.sar
You have to download all these files and extract then in one folder - there you have to use the sapinst and install the patch.
I hope i understood your requirement the right way.
Regards,
Andr'e -
Adding a JDBC driver in Sun Java System Web Server 7
I'm trying to configure JDBC database connection pooling for a Microsoft SQL Server 2005 Express Edition though the Sun Java System Web Server 7 administration console. I don't want to use the MSSQL JDBC driver that comes bundled with the SJSWS 7. So I've downloaded the lastest MSSQL JDBC driver from the Microsoft website and put in the "lib" subdirectory of the SJSWS installation directory. So when I go to add a new JDBC resource through the administration console, the newly added MSSQL database driver doesn't appear in the "Driver Vendor" drop-down box.
How do I add the downloaded JDBC driver to the server so that it appears in the "Driver Vendor" drop-down under "Create JDBC resource".Check this documentation from MS on using the JDBC driver with DataSource
http://msdn2.microsoft.com/en-us/library/ms379052.aspx
SJS Web Server 7.0 should work with any driver that has support for javax.sql.DataSource. The great majority of drivers do.
So instead of using the driver name, use the DataSource class name:
com.microsoft.sqlserver.jdbc.SQLServerDataSource
The properties to add should be:
user=username
password=password
servername=sql_server_hostname
portnumber=sql_server_port
databasename=databasename
In general, all the setters required to get the datasource configured can be set as properties. -
Sun Java System Web Server 7.0 available
I am delighted to announce that Sun Java System Web Server 7.0 is now available for download, purchase, deployment, and more.
This release builds on the highly scalable and stable heritage of Web Server. It features an entirely re-designed Administration interface designed around clusters, easy access to frequently performed tasks, simplification of frequently performed tasks., and a fully scriptable command line interface featuring functional parity with the browser-based interface.
In addition to the administration changes this release features:
o Full 64-bit support for Solaris SPARC and Solaris AMD64 platforms
o Regular expression pattern matching for URL re-writing and mass hosting
o If/Then/Else constructs within request processing
o Advanced sed based input and output filters
o Dynamic loading of Certificate Revocation Lists (CRLs) without requiring daemon restart
o Elliptic Curve Cryptography (ECC)
o Built in request mapping for protection against abnormal load patterns and Denial of Service protection
o WebDAV ACL support
o Out-of-box Java support for Servlets 2.4, JSP 2.0, JSF 1.1, JSTL 1.1, JWSDP 2.0 based web services
o Java session failover and recovery within a cluster of peers
o Integrated HTTP reverse proxy User-Agent
o Bundled FastCGI client for use with third party scripting environments such as Perl, PHP, Ruby on Rails, etc
o Enhancement of perfdump, stats-xml, and SNMP as well as more ability to monitor the Java container and the ACL system
o Much more
The software can be downloaded from:
http://www.sun.com/download/products.xml?id=45ad781d
The documentation is available at:
http://docs.sun.com/app/docs/coll/1308.3If 7.0 was released, how come http://www.sun.com/webserver still only talks about 6.1?
Maybe you are looking for
-
thank you
-
1st crack of the whip - back for more later
well, that was harder than i had expected! i've not come here to flame so don't flame me - i just wanted to share my first arch experience. The install was easy – i still use Vector Linux – and the install is very similar. I chose the 2.6 kernel an
-
Hi All, i am facing problem with incoming mail, some time outside mail bouncing back with following error Eg: [email protected] SMTP error from remote mail server after initial connection: host mail.example.com [ 3.3.3.3 ( static ip)]: 554 No SMT
-
How do i open an Appleworks file now that I am running Mavericks and Pages?
How do I open an Appleworks file now that I am running Mavericks and Pages?
-
Create Smart Albums with Applescript
Hi I'm looking for a way to create smart albums with Applescript. So far I was able to create simple albums. Does anybody now if this is possible? Best wishes kik