ADO Error: 0x00000001 Argument error. One of the column names specified is blank.

I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
Attachments:
AddNewMeasurer.vi ‏40 KB

tripped wrote:
I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
The query "appears" fine. Well, obviously it isnt' fine. The database is telling you that.
What is the SELECT query you are sending?

Similar Messages

HT203167 Due to system error, I couldnt backup one of the purchased game. Is it possible for me to get this app free of cost again?

Due to system error, I couldnt backup one of the purchased game. Is it possible to get this game free?

Download Past Purchases
http://support.apple.com/kb/HT2519

Error: You are not one of the possible agents of task 'WS99900032'

Hi frnds,
I have copied the std leave request workflow WS12300111 into WS99900032 and assigned in the SPRO setting. The approvers are determined using the workflow rule (PFAC) and its not determined from Org Management. But when i tried to apply leave, its throwing me the error You are not one of the possible agents of task 'WS99900032'.
Can anyone give me solution to solve it?
thanks,
Suganya.

You are not one of the possible agents of task 'WS99900032'
You need to refresh the organizational environment and then execute the workitem
1. First make the workflow tempalte as General task and then
Goto PFTC ---> enter the workflow tempalte number by selecting workflow template ---> open in display mode and on menu Addtional Data ---> agent assignment ---> Maintian ---> select General task
2. Goto SBWP -
> Seetings -
>workflow settings -
> refresh ornozational environment and then try to execute the workitem

When trying to import videos off of a CD I continually get error code -36 on one of the videos. How can I fix this?

When trying to import videos off of a CD I continually get error code -36 on one of the videos. How can I fix this?

Contact Apple and request a 10.4 or possibly a 10.5 distribution disk for this system, if you've not obtained that DVD disk from the seller.
Boot and use that distribution disk to wipe the hard disk via Disk Utility, and to then reinstall OS X.
Best to start with a fresh installation of OS X, as that'll provide the default environment and not something that's been customized and extended by the previous owner.
The last OS X version that was supported for most PowerMac G5 systems was 10.5.8, and that would be preferable — if your Mac supports that.
If you're not sure which Mac you have, then use the  > About This Mac from the menu and request more information on the system. You're looking for a model number listed there, and that'd be something like PowerMac7,3 or PowerMac11,2 for a ~2005-vintage PowerMac system. Whatever model number you have can then be used to determine the general specs for the configuration, and what the last version of OS X that was supported for the system.

Error: this type needs one of the following values('true','false')

I'm trying to use <c:if> in a jsp (in Workshop 8.1), as in:
               <c:if test="1 == 1">
          
          </c:if>
          But, I get the following message when I hover over the error indicator
          at the test:
          Error: this type needs one of the following values('true','false')
          It will actually work if I do:
               <c:if test="true">
          
          </c:if>
          but, of course, that's useless.
          Am I missing something here?

David Karr wrote:
          > The value of the "test" attribute needs to be an Expression Language expression. Try changing it to "${1 == 1}", and that should work.
          Actually, I had tried that, and it would have worked that way if I had
          the right taglib declaration -- I had accidentally left in the rt
          versions, so a <%= test %> type of expression worked.
          But, that's not the way I wanted to do it, so I put the non-rt versions
          in, along with tld and jar files that I had in some other directories,
          then it worked fine. In the process, when searching my hard drive for
          standard.jar, I noticed I had four or five different versions, each with
          a slightly different size. Of course, I had to tinker, and downloaded
          the zip from Apache, figuring it would be best to have a matched set of
          tlds and jars.
          And now I get an error that the matching class cannot be found:
          > ERROR: response.jsp:1: Package org.apache.taglibs.standard.tag.el.core contains no member type of this name.
          and
          > ERROR: response.jsp:14: The tag handler class was not found "org.apache.taglibs.standard.tag.el.core.IfTag".
          But, if I navigate the standard .jar that is in my WEB-INF/lib
          directory, lo and behold, there is the file IfTag.class in what appears
          to be the correct package.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is: Cannot send mail. The user name or password for iCloud is incorrect.

We purchased a new iPad2 and registered it using a 'new' iCloud email/ID. We are unable to send email from the iPad and iPhone. The error is:>> Cannot send mail. The user name or password for iCloud is incorrect.

About ~20 hours later, this ended up solving itself. We can send email using the '.icloud' email from both the iPad and iPhone. Advise would be 'wait' before you start seeking alteranatives like yahoo, hotmail, etc. This definitely is a convenient way to keep all your 'cloud' information in a centralized place, including the common email...

Retrieve as many duplicate records as a value stored in one of the columns

Hi,
I have a peculiar requirement where I want multiple copies of rows the count of which is determined by one of the column values:
create table test (id number, value number, data varchar2(100));
insert into test values (1,5,'one');
insert into test values (2,2,'two);
insert into test values (3,3,'three');
insert into test values (4,4,'four');
insert into test values (5,5,'five');
select * from test where id=3;
I get:
id,value,data
3,3,three
I want:
id,value,data
3,3,three_1
3,3,three_2
3,3,three_3
i.e. Althought there is ONLY ONE row for the id=3, but as the column value=3, i want 3 rows from this table (all identical) except the last column to which I append a running sequential number.
How to do that?
Thanks.

You have still pipelined function :
SQL> create or replace type TypeTest as object (id number, value number, data varchar2(100));
2 /
Type created.
SQL>
SQL> create or replace type ListTest as table of TypeTest;
2 /
Type created.
SQL>
SQL> create or replace function TblTest(p_id number default null)
2 return ListTest
3 pipelined
4 is
5 begin
6      for x in (select id, value, data from test where id = nvl(p_id,id)) loop
7          for i in 1.. x.value loop
8              pipe row (TypeTest(x.id, x.value, x.data||'_'||to_char(i)));
9          end loop;
10      end loop;
11      return;
12 end;
13 /
Function created.
SQL> show err
No errors.
SQL>
SQL> select * from table(TblTest(3));
        ID      VALUE DATA
         3          3 three_1
         3          3 three_2
         3          3 three_3
SQL> select * from table(TblTest);
        ID      VALUE DATA
         1          5 one_1
         1          5 one_2
         1          5 one_3
         1          5 one_4
         1          5 one_5
         2          2 two_1
         2          2 two_2
         3          3 three_1
         3          3 three_2
         3          3 three_3
         4          4 four_1
         4          4 four_2
         4          4 four_3
         4          4 four_4
         5          5 five_1
         5          5 five_2
         5          5 five_3
         5          5 five_4
         5          5 five_5
19 rows selected.
SQL> Nicolas.

How to give more relevance to one of the column in multicolumn datastore

Hi Gurus,
While using multicolumn datastore needed to give more importance to one of the column than the other one. How can we achieve the same ?
SQL> create table test_sh4 (text1 clob,text2 clob);
Table created.
SQL> alter table test_sh4 add (text3 clob);
Table altered.
SQL> begin
2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
3 ctx_ddl.set_attribute
4 ('nd_mcd',
5 'columns',
6 'replace (text1, '' '', '''') nd, text1 text1,replace (text1, '' '', '''') nd, text1 text1');
7 ctx_ddl.set_attribute ('nd_mcd', 'delimiter', 'newline');
8 ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
9 ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+');
10 end;
11 /
PL/SQL procedure successfully completed.
SQL> create index IX_test_sh4 on test_sh4 (text3)
indextype is ctxsys.context
parameters
('datastore nd_mcd
lexer test_lex1')
/ 2 3 4 5 6
Index created.Here while querying how can I give more relevance to text1 column than text2 column ?

Every time that you post code, whatever you are using eliminates all formatting and changes any multiple spaces to single spaces, so it makes it hard to tell what your code really is. Within the function, you need to remove the special characters and double spaces before you use the string for anything else. In the first part of your output string, you were only putting a % in front of the first word and after the last word. I fixed it so that it puts % before and after every word. I also added some code to return a score of 100 when an exact match is found in any column. You can use the function in a select from dual to see what it is returning. Please see the demonstration below. I will provide a copy of the function in a separate post that you can copy and paste. You may want to adjust the values that you multiply by. The values of 10 and 5 and .5 and .1 were just examples.
SCOTT@orcl_11gR2> create table test_sh (text1 clob,text2 clob);
Table created.
SCOTT@orcl_11gR2> alter table test_sh add (text3 clob);
Table altered.
SCOTT@orcl_11gR2> insert all
2 into test_sh (text1, text2, text3)
3    values ('staple card', 'word2', 'word3')
4 into test_sh (text1, text2, text3)
5    values ('word4', 'staple card', 'word5')
6 into test_sh (text1, text2, text3)
7    values ('staplecard', 'word2', 'word3')
8 into test_sh (text1, text2, text3)
9    values ('word4', 'staplecard', 'word5')
10 into test_sh (text1, text2, text3) values
11    ('Weber Genesis S-310 Gas Grill',
12      'Weber Genesis S-310 Gas Grill',
13      'Weber Genesis S-310 Gas Grill')
14 select * from dual
15 /
5 rows created.
SCOTT@orcl_11gR2> begin
2    ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
3    ctx_ddl.set_attribute
4       ('nd_mcd',
5        'columns',
6        'replace (text1, '' '', '''') nd1,
7         text1 text1,
8         replace (text2, '' '', '''') nd2,
9         text2 text2');
10    ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
11    ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+');
12    ctx_ddl.create_section_group ('test_sg', 'basic_section_group');
13    ctx_ddl.add_field_section ('test_sg', 'text1', 'text1', true);
14    ctx_ddl.add_field_section ('test_sg', 'nd1', 'nd1', true);
15    ctx_ddl.add_field_section ('test_sg', 'text2', 'text2', true);
16    ctx_ddl.add_field_section ('test_sg', 'nd2', 'nd2', true);
17 end;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index IX_test_sh on test_sh (text3)
2 indextype is ctxsys.context
3 parameters
4    ('datastore     nd_mcd
5       lexer          test_lex1
6       section group     test_sg')
7 /
Index created.
SCOTT@orcl_11gR2> create or replace function text_format
2    (p_string in varchar2)
3    return         varchar2
4 as
5    v_string     varchar2 (32767);
6    v_string_out varchar2 (32767);
7    v_string_in1 varchar2 (32767);
8    v_string_in2 varchar2 (32767);
9    V_TOKEN         VARCHAR2 (32767);
10 BEGIN
11    -- remove special characters and double spaces before using in anything else:
12    v_string := trim (translate (p_string, '/\|-_+&', '      '));
13    v_string := replace (v_string, '''', '');
14    while instr (v_string, ' ') > 0 loop
15       v_string := replace (v_string, ' ', ' ');
16    end loop;
17    -- fixed 2 lines below:
18    v_string_out := '(%' || replace (v_string, ' ', '% %') || '%) ' || ',';
19    v_string_out := v_string_out || '(' || v_string || ')' || ',';
20    -- first search string with spaces:
21    v_string_in1 := v_string || ' ';
22    -- second search string without spaces:
23    v_string_in2 := replace (v_string_in1, ' ', '') || ' ';
24    if v_string_in2 = v_string_in1 then
25       v_string_in2 := null;
26    end if;
27    -- format search string one token at a time:
28    while v_string_in1 is not null loop
29       v_token := substr (v_string_in1, 1, instr (v_string_in1, ' ') - 1);
30       v_string_out := v_string_out
31       || '('
32       || '?' || v_token || ' or '
33       || '!' || v_token || ' or '
34       || '$' || v_token
35       || '),';
36       v_string_in1 := substr (v_string_in1, instr (v_string_in1, ' ') + 1);
37    end loop;
38    while v_string_in2 is not null loop
39       v_token := substr (v_string_in2, 1, instr (v_string_in2, ' ') - 1);
40       v_string_out := v_string_out
41       || '('
42       || '%' || v_token || '% or '
43       || '?' || v_token || ' or '
44       || '!' || v_token || ' or '
45       || '$' || v_token
46       || '),';
47       v_string_in2 := substr (v_string_in2, instr (v_string_in2, ' ') + 1);
48    end loop;
49    -- return formatted string (added score of 100 for exact match in any column:
50    return
51       '(' || v_string            || ') * 10 * 10 or
52        (' || rtrim (v_string_out, ',') || ' within text1) * 10 or
53        (' || rtrim (v_string_out, ',') || ' within nd1) * 5 or
54        (' || rtrim (v_string_out, ',') || ' within text2) * .5 or
55        (' || rtrim (v_string_out, ',') || ' within nd2) * .1';
56 end text_format;
57 /
Function created.
SCOTT@orcl_11gR2> show errors
No errors.
SCOTT@orcl_11gR2> select text_format ('STAPLE CARD') from dual
2 /
TEXT_FORMAT('STAPLECARD')
(STAPLE CARD) * 10 * 10 or
     ((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin text1) * 10 or
     ((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin nd1) * 5 or
     ((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin text2) * .5 or
     ((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin nd2) * .1
1 row selected.
SCOTT@orcl_11gR2> column text1 format a11
SCOTT@orcl_11gR2> column text2 format a11
SCOTT@orcl_11gR2> column text3 format a11
SCOTT@orcl_11gR2> SELECT SCORE(1), t.* FROM test_sh t
2 WHERE CONTAINS (text3, text_format ('STAPLE CARD'), 1) > 0
3 ORDER BY 1 DESC
4 /
SCORE(1) TEXT1       TEXT2       TEXT3
       100 staple card word2       word3
       100 word4       staple card word5
       100 staplecard word2       word3
        10 word4       staplecard word5
4 rows selected.

Error in nested group function used with column name.

Hi Team,
If i used nested group function with column name its not working. Could you please any one suggest me.
How to use it.
Regards,
Venkat.
Please find Spool ........
SQL> select user_name,max(max(CNT)) from (select USER_NAME,count(*) CNT from v$open_cursor group by USER_NAME)
2 group by user_name,CNT;
select user_name,max(max(CNT)) from (select USER_NAME,count(*) CNT from v$open_cursor group by USER_NAME)
ERROR at line 1:
ORA-00937: not a single-group group function
SQL> select max(max(CNT)) from(select USER_NAME,count(*) CNT from v$open_cursor group by USER_NAME)
2 group by user_name;
MAX(MAX(CNT))
605

Venkat wrote:
Hi Sayan
Its giving output like below, but not given maximum CNT.
SQL> select user_name,max(CNT)from (select USER_NAME,count(*) CNT from v$open_cursor group by USER_NAME)
2 group by user_name;
USER_NAME MAX(CNT)
BANES_LERG 6
VENE_USER 8
USER3 339
DBUS 106
VEL_USER 37
SYS 597
6 rows selected.Check it - Re: Error in nested group function used with column name.
and previous post

Have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer.

I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

How to store data file name in one of the columns of staging table

My requirement is to load data from .dat file to oracle staging table. I have done following steps:
1. Created control file and stored in bin directory.
2. Created data file and stored in bin directory.
3. Registered a concurrent program with execution method as SQL*Loader.
4. Added the concurrent program to request group.
I am passing the file name as a parameter to concurrent program. When I am running the program, the data is getting loaded to the staging table correctly.
Now I want to store the filename (which is passed as a parameter) in one of the columns of staging table. I tried different ways found through Google, but none of them worked. I am using the below control file:
OPTIONS (SKIP = 1)
LOAD DATA
INFILE '&1'
APPEND INTO TABLE XXCISCO_SO_INTF_STG_TB
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
COUNTRY_NAME
,COUNTRY_CODE
,ORDER_CATEGORY
,ORDER_NUMBER
,RECORD_ID "XXCISCO_SO_INTF_STG_TB_S.NEXTVAL"
,FILE_NAME CONSTANT "&1"
,REQUEST_ID "fnd_global.conc_request_id"
,LAST_UPDATED_BY "FND_GLOBAL.USER_ID"
,LAST_UPDATE_DATE SYSDATE
,CREATED_BY "FND_GLOBAL.USER_ID"
,CREATION_DATE SYSDATE
,INTERFACE_STATUS CONSTANT "N"
,RECORD_STATUS CONSTANT "N"
I want to store file name in the column FILE_NAME stated above. I tried with and without constant using "$1", "&1", ":$1", ":&1", &1, $1..... but none of them worked. Please suggest me the solution for this.
Thanks,
Abhay

Pl post details of OS, database and EBS versions. There is no easy way to achieve this.
Pl see previous threads on this topic
SQL*Loader to insert data file name during load
Sql Loader with new column
HTH
Srini

How to make one of the columns in my tabular an text item with popup lov

Hello,
I want to manually make one of the columns say for the deptno in my tabular form as on text item popup lov using apex_item package
and whenever user clicks on the text item popup lov, it should open up an dept table report and from which he/she needs to select
the deptno and this deptno should be returned into the text item popup lov column.
like for example: say if i have an emp table tabular form with all the columns and deptno column as an popup lov and when user clicks on this column
it should open up an new sql report(similar to popup lov window), the select statement for this would be
select deptno,dname,loc from dept order by 1;
And from this popup lov report whenever an user selects a particular deptno, the same deptno should be returned to my text item popup column in emp tabular form.
something like this
select
"EMPNO",
"EMPNO" EMPNO_DISPLAY,
"ENAME",
"JOB",
"MGR",
"HIREDATE",
"SAL",
"COMM",
APEX_ITEM.TEXT(3,deptno,20,50,'readonly=true') || '<img height="16" align="middle" width="16" style="vertical-align: middle;" alt="Popup Lov" src="/i/lov_16x16.gif"/>' deptno
from "#OWNER#"."EMP"
like i made my column as an text item lov and now I want to write an onclick event for the text item lov so that an popup window is displayed which is a sql report of the table dept (select deptno,dname,loc from dept order by 1;) and in this report i want to make deptno as an link so that when ever an user clicks on it
-- this value should be returned to my text item popup lov column deptno in the emp tabular form.
can anyone help me out with this issue.
thanks,

Hi,
Refer to the link for the detailed information on ALV Grid.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Hope it helps.
Regards,
Rajesh Kumar
Edited by: Rajesh Kumar on May 25, 2009 9:13 AM

Push button in one of the columns of Table Control

Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. S

Hai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj

I wish to modify the name of one of the field name in the sales order.

HELLO GURRRUS,
i wish to modify teh name of one of the field name in the sales ordder.
what is the procdure,path and steps involved in that.it would be of great help of me if u take some time and suggest me.
bye take care hav a happy and peaceful life

Hi Sameer,
If you want to change the name or description of the field in the Sales order,
you have to use the userexit MV45AFZZ and use the Form USEREXIT_FIELD_MODIFICATION.
Get the help of the ABAPer and decide where do you want to make the change in the Header or the Line items. Accordingly give the requirements to the ABAPer.
He will do it.
Thanks
Augustine Ponraj

My avast! antivirus software is identifying two Trojan viruses on my MacBookPro (Max OSX 10.7.5) that seem to be related to my Outlook for Mac. An example of one of the file names is: /.MobileBackups/Computer/2014-06-22-151618/Volume/Us

My avast! antivirus software is identifying two Trojan viruses on my MacBookPro (Max OSX 10.7.5) that seem to be related to my Outlook for Mac.
An example of one of the file names is: /.MobileBackups/Computer/2014-06-22-151618/Volume/Users/stevekreitner/Documents /Microsoft User Data/Office 2011 Identities/Main Identity [Backed up 2014-06-22 12.48.35]/Data Records/Message Attachments/0T/0B/0M/9K/x26_9605.olk14MsgAttach
Any suggestions on how to locate and remove these virsues?

Actually, you can delete the entire Main Identity folder for Outlook that has a backup date in brackets [xxx] as part of its name since that was created when you used the Microsoft Database Utility to rebuild your email database. The folder that is only named Main Identity is the one in use. The other is now nothing.
That should be true but sometimes users are in the wrong Identity. Outlook 'forgets' what is supposed to be the main default Identity and opens in the wrong one. You need to check the database file in the Identity to see date modified to know for sure.
Typically, after rebuilding you delete the rebuild after a bit when you are satisfied with the rebuild. There should only be one Identity in the Identities folder. However, most users don't understand what to do with the copy that is made and never deletes anything.

ADO Error: 0x00000001 Argument error. One of the column names specified is blank.

Similar Messages

Maybe you are looking for