Adobe Cap 5.5 on Moodle - Rapitvity and video files not working

Has anyone found a solution to this problem? Thanks, Sandra

In the dialog inside Captivate where you set up the path to find the video file. By default, Captivate sets an absolute link, however, this path will be invalid if your video will be moved to another system (e.g. the LMS). You have to alter the default path to make it a relative path. The usual method is to copy the video file into the same publish folder as the Captivate SWF. (By default, Captivate doesn't move your video file for you at publish time.) If your FLV or F4V file is sitting in the same folder as your SWF, then you can just use the filename of the video file as your relative path when setting up the link in the dialog.
I also recommend you ONLY use lowercase filenames at all times for Captivate projects, including the published file and folders, and that you NEVER have spaces in files or folder names. These precautions will eliminate many baffling link failures when projects are moved from a Windows development environment to another webserver environment.

Similar Messages

After downloading iOs 7 to my iPad 2 Skype application mic and video is not working? any advice?

I downloaded iOs 7 to my iPad 2 and updated Skype app. After this,m microphone and video are not working. My called party is not able hear me nor see me. Any guidance from the Community?
g.k.fromind

After updating IOS many people have the same problem that the mic no longer works and Apple say it is a hardware problem. Rubbish! Plug in an apple earphone and then try it. (Apple earphones have 4 sections on the jack plug, must be this type.) Mic works fine so obviously it is a problem in the new IOS and this is a way around it!
Hope this helps other people,
Chris.

Some programs and video files dont work.

Some programs and video files dont work, get a crash report everytime I close, even after an uninstall everything and re install.
So I try playing some videos and it gives me an error, which I can watch on Chrome. Soundcloud doesnt seem to work, again works on chrome, and before I could watch WebM's but now it says not supported MME. Also everytime I close I get a crash reporter. I tried uninstalling and reinstalling but nothing seems to work. I just happened recently. Also cant play soundcloud. Tried everything, feeling like going to chrome where things work and support is actual support

Protected mode works on some systems and not others. Since two of your four crash reports were related to Flash, I thought it was worth a try, but it's up to you whether you want to try it.
I'm not sure whether the issue with WebM video is a setting issue or a program files issue or a system issue.
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
Don't delete anything here. Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, choose a name like TESTING, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Any better results with WebM video or shutdown?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.
'''Clean Reinstall'''
A regular reinstall may leave some stray files in your programs folder. This method is a bit cleaner.
(1) If needed, download a fresh installer for Firefox 30 from https://www.mozilla.org/firefox/all/ to a convenient location. (Scroll down to your preferred language.)
(2) Exit out of Firefox.
(3) Rename the folder
C:\Program Files (x86)\Mozilla Firefox
to
C:\Program Files (x86)\OldFirefox
(4) Run the installer you downloaded in #1. It should automatically connect to your existing settings.
Does Firefox behave more normally?
Note: Some plugins may exist only in that OldFirefox folder. If something essential is missing, look in these folders:
* C:\Program Files (x86)\OldFirefox\Plugins
* C:\Program Files (x86)\OldFirefox\browser\plugins

BBM Voice and Video calls not working

Hi!
I'm using BB Z3 OS: 10.3.1 and my friend using BB Z3 OS: 10.2.1, we both are using BBM over wifi and our BBM is upto-date but when i'm dailing call, "Connecting to BBM video service, please wait and try again" error apears, why we unable to make voice or video calls? any one tell me?

The last I read, BBM voice and video is not available in Pakistan.
I believe it is in UAE.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Transitions and dragging files not working in Final Cut Express 4

Although this topic has been gathering dust in these archives for a while, my problem differs in that there's plenty of room either side of the edit point. So no need for "handles" either side.
Today I installed Final Cut Express 4 on my swanky new MacBook Pro which I am stroking as I write. Ooh, baby, brushed aluminium ...
First, in the Browser, I've set up a "bin" but I am unable to drag any of the four short clips that I've imported from my Nokia 5800 phone. Yet it has worked perfectly in iMovie (the good one, the one with the Timeline).
Why, when I click on a clip, can I not grab it in order to drag it to the bin?
Neither will it let me drag any of the transition icons into place as is done in the tutorial. But when I click on the edit, it drops a brown vertical that looks like it could be the transition icon (I want the cross dissolve at about 2 seconds). I tried several transitions but nothing seems to be showing up in the preview canvas.
How do I drag the transition icon into place?
Once success, though. I used the razor blade to get rid of a few frames, then shift and delete so the whole thing lifts out with the audio — that worked properly. But the edit is a straight cut, no dissolve.
There was a red line that told me something needed rendering, so I rendered "both". Sequence, render all, "both". But when I click on the edit I get another red horizontal render line above it. That's happened several times.
A window with browser and canvas appeared, reading Trim Edit, (left viewer side) Outgoing clip (vid name) 00:00:40:19 and 00:00:41:18, then (right canvas side) Incoming clip 00:01:10:24 and 00:00:50:15. There's also a button reading Track VI but I have no idea what that is. I've tried sliding things but I can't get timings that look like a second to the left of the edit point, and a second to the right, meaning they overlap by two seconds.
The window had three sets of controls, one under the viewer "Outgoing Clip", a second under the right hand canvas "Incoming Clip". The middle one plays the canvas screen as Previewing Edit. Again, we get to the transition and it's a basic cut.
Help! What's going wrong?

"imported from my Nokia 5800 phone."
This material will not work with FCE. It needs to be converted to a format that is compatible with FCE. You can probably use MPEG Streamclip to do this.
Transitions: http://www.fcpbook.com/Effects1.html
Please confirm that you have handles available on your media to create the overlap for the transition.
Rendering: Your material is not compatible with FCE.

Screen Sharing, audio, and video chat not working with certain people

My ichat application will suddenly stop working after just a few seconds of starting wither screen sharing, video chat, or audio chat. I get the error message "No data has been received for the last 10 seconds." How do i go about fixing this?

Hi,
This message can be caused two ways.
1) a loss of Internet Connection through a Physical means.
(turning Off Airport card, Pulling out Ethernet Cable, modem or router failure, loss of service from ISP)
2) A router or modem Software intervention.
This most commonly happens in Video chats. The device has a feature called DOS (Denial of Service) which with modern Internet Speeds and Video Streams gets to the threshold where it cuts in. It requires that you turn the feature Off as there is not adjustment in the threshold at which it works.
A similar feature with a similar result is SPI (Stateful Packet Inspection).
Having said that, it very unusual to have it effect Audio only chat or Screen Sharing.
This means the issue could be at the Buddies end.
NOTES:
iChat creates Logs of Connection Failures of which there are about 5 types, caused by various issues in the connection Process.
The 10 Sec Error message covers those things where the connect End but iChat did not receive a "BYE" message (a controlled End to the Chat) or get a failure of another sort.
Basically you were connected properly (even if you did not hear or see the Buddy) and so other event cut the connection that was not iChat related.
Can you do Video chats with any of the 6 names in Table 1 ?
http://www.ralphjohns.co.uk/ContactTesters.html
Some of those will respond to Audio Only invites.
(I just tested 4 of them and three play music and one the Audio form the Jonathon Ive Video)
Do any of those work ?
That will exclude a Modem or Router Issue with DOS or SPI on the remote end.
9:29 PM Wednesday; June 9, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Message was edited by: Ralph Johns (UK)
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Screen Share, Audio Chat and Video Chat not working

Hey everyone.
I recently started having issues with using some of the iChat protocols over AIM with a friend of mine.
I can send IMs and files perfectly, but I can't get Audio Chat, Video Chat or even Screen Sharing (both ways) to work. After a while I get: "Failed to start Screen Sharing because: Screen Sharing could not be established." I also get the exact same message when trying to Audio chat or Video chat.
If anyone knows the answer to this problem please help us...
Thanks in advance
DJ Schep

Is this with a Speedtouch ?
Is this you http://discussions.apple.com/thread.jspa?threadID=1668357 ?
11:48 PM Monday; August 18, 2008

IChat - audio and video chats not working to the UK

I'm trying to do an audio and/or video chat with my Mum who lives in the UK. We're both using the same version if iChat A/V (3.1.5)
However, we've been unable to succesfully connect. Whether she invites me to a chat or I her, we both get a message saying the other person failed to respond, even though we're both accepting the invitation.
I have no problem audio/video chatting to anyone else and it also work with my Mum through Skype or Yahoo Messenger.
Any ideas?

Hi FootsyStuey,
Welcome to the Apple Discussions
Can you tell us what you have done to set iChat up ?
System Preferences > Quicktime > Streaming seting to 1.5Mbps/T1/LAN ?
Mac Firewall ? see here http://www.ralphjohnsuk.dsl.pipex.com/page4.html
The ports in the modem ? See here http://www.ralphjohnsuk.dsl.pipex.com/page3.html
11:00 PM Tuesday; December 12, 2006

Audio and Video Chat not working?

I know that several other people have asked this question but I still can't fix my problem with iChat. I've successfully had a video chat before but tonight, when I attempted to video chat with a friend I recieved the message, "[my name] didn't respond" multiple times. I'm not sure what's going on since I've been able to video and audio chat before. Any suggestions?

I'm having the exact same problem. Not a week ago, I was able to successfully connect to any computer on our home network (7 other machines), a friend in Massachusetts, and another, in Lousiana. After a router swap (same make and model, Linksys WRT54GX4) I recieve the '(I) did not respond' message. I have tried everything imaginable, DMZ on, DMZ off, route forwarding for every concievable combination, firewalls for my friends and I off, still no dice. They've tried downgrading to AIM 5.9 from Triton, but it still flatly refuses to work. It's a bit annoying, since my girlfriend lives 300 miles away, and my brother is in China..it'd be nice to talk to one of them every so often.
Ah, yes, just to throw a further wrench into the mix, I can connect to all three Apple test accounts with no problem, but any other test account gives me the connection problem

HT4972 Since I updated to new operating system iOS 7 for iPad my skype app has problem with microphone setting and video is not working? How can this be fixed?

How can I get Skype microphone settings to work with new iOS 7? Also the video no longer works,...any suggestions?

Only for the sound:
settings > privacy > sound

Effects and key-frames not working on some clips Premiere CC 2014

Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
MSI GT60 Laptop:
Intel Core i7 4800MQ (2.70GHz)
16GB Memory 1TB HDD 128GB SSD
NVIDIA GeForce GTX 880M 8GB
2880 x 1620 16:9 3K Display
Windows 8.1 64-Bit

Here is the exact screenshot. Now I'm also trying other effects as stated in my original post. But this effect is just an example. Is there really something that I'm doing wrong here? Or am I forgetting something? Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
I wish that I could post a video, but I don't know how.
Please let me know what I need to do to make this work properly.
TEX

Online audio and video files are not working

i got a plugin for shockwave flash(adobe flash player) i thought it is the latest version so i downloaded it and installed it. Before installing the new flash player i was able hear song online and can watch videos but now both audio and videos are not working.

thanx for your advise but i got to hav one more problem and that is...i have downloaded the new version setup of firefox but after extracting it stops working and the installation process ends automatically...so please help.
the file that i downloaded had the "Firefox Setup Stub 23.0.1"

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC, I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING

BE NICE TO BE ABLE TO BURN BLUE-RAY DISC,
I TRIED AT LEAST 3 BURNERS APPROVED BY ADOBE WEBSITE AND IT'S NOT WORKING...

Maybe the problem is caused by a stuck CAPS LOCK key? 8/

I have installed adobe flash player on my computer and this is not working please help

I have installed adobe flash player on my computer and this is not working please help

What is your operating system & version?
What is your web browser?
What means "not working"; what do you see instead of the expected Flash content?

I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase

I moved from the UK to Sweden. My trial expired in the UK but I was not able to purchase CC in Sweden for some reason. I was told to create a new account in Sweden with a new Adobe ID. When I did, the trial downloads did not work and I could not purchase the CC at discount price.

Moving this discussion to the Adobe Creative Cloud forum.
Kriskristferson if you are facing difficulties with your order then please contact our support team directly at Contact Customer Care.

Adobe Cap 5.5 on Moodle - Rapitvity and video files not working

Similar Messages

Maybe you are looking for