Adobe Encoder and Premiere Issues

Hi,
i have edited a 25min clip on following settings
25fps
720 by 576
192kbps sound MPEG2
CBR 6
the problem i am having with this is once the rendering has finished and i wish to export it and do so via adobe encoder. there is where my problem begins. when i try to encode a 25min clip it says it will take 2+ hours to encode a 25min clip! why is this the case? all my fles and in the same project folder as the project even then it says it will take 2hours to encode a 25min clip on MEPG2 format.
please help.

A fast computer is fast, a slow computer is... well... slow
Since you provide ZERO computer information, I will GUESS your computer is slow
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link
Read Harm on drive setup http://forums.adobe.com/thread/662972?tstart=0
- click the embedded picture in Harm's message to enlarge to reading size
- you need AT LEAST 2 drives for video editing, 3 is better
- some HD formats work better with (require) RAID
Read Hunt on Partitions http://forums.adobe.com/thread/650708?tstart=0
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0

Similar Messages

  • Adobe Photoshop and Premiere Elements 10

    I purchased Adobe Photoshop and Premiere Elements 10, but the DVD will not load.  Help!

    It is possible the disc is defective.  Can you read the contents of the disc?  If you are unable to find a file that resembles an executable for the type of system you own, then you should contact support to confirm that your discs are faulty and they can probably point you in the right direction for obtaining new discs. 
    Here are some links to help make contact if you find the need to:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/
    Aside from that...
    You should be able to download the software as trials via the links below and use the serial number from the discs to activate.
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.

  • I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.

    I accidentally purchased Adobe Photoshop and Premiere Elements for Windows, but I need it for Mac. Please advise.

    Return, cancel, or exchange an Adobe order

  • Redownloading adobe photoshop and premiere 11

    how do I download Adobe photoshop and premiere  11?  Accidently deleted during a recovery on my new windows 8 computer.  Live parttime in mx.  Left disk there and am the US for 3 weeks

    if you follow all 7 steps you can dl a premiere trial here:  http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l and ps cs6 trial here: http://prodesigntools.com/adobe-cs6-direct-download-links.html
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.  the most common error involves failing to meticulously follow steps 1,2 and/or 3.

  • Continuing font encoding and tag issues with snow leopard and CS4oI

    I am looking for help with a font handling issue with snow leopard and cs4 Indesign. Despite numerous calls and hours on the phone neither Apple nor Adobe has been helpful. I have had this issue open with Adobe since oct 5 but they remain totally unresponsive to date. I need to be able to use Type 1 fonts and do the following , export a pdf from Indesign with the following attributes: 1) xml tags for stories and objects. 2) have the fonts encoded as ansi and embedded.
    Some additional information  - exporting to ps is not an option as it destroys the xml tags. and doesn't guarantee that the fonts won't become CID or some other odd encoding.
    As it stands now,
    Leopard (10.5.8) and CS3 creates ansi encoded fonts with xml tags.
    Leopard (10.5.8) and CS4 creates ansi encoded fonts with xml tags.
    Snow leopard and CS3 creates ansi encoded fonts and xml tags
    Snow leopard and CS4 creates custom subsetted fonts and some xml tags.
    If any one has any advice on how to force specific font encodings from CS4 pdf exports so that i can preserve the tags and get the correct fonts I would be grateful.

    The font encoding is not a function of the OS version, but rather of how a font is internally encoded and the content you are representing with the font.
    If you are seeing a difference between MacOS 10.5 and 10.6 with the same Adobe software, it probably has something to do with use of a system font that is somehow different from one version of the OS to another. InDesign does not use any of the OS' font handling software.
    Assuming that the fonts are embedded, subset or not, what is your issue with whether a font is ANSI-encoded, custom-encoded, or CID-encoded? It should make no difference for purposes of workflow beyond InDesign for software that adheres to the PDF specification (including all versions of PDF from 1.3 and up to 1.7 plus ISO 32000-1 PDF and all versions of PDF/X and PDF/A).
    Neither InDesign or any other Adobe application provides user choices for the encoding since it shouldn't make a difference. The encodings chosen by Adobe's core technology components are for a combination of optimization and to support proper text search, copy, etc.
              - Dov

  • Is there a manual available for Adobe Photoshop and Premiere Elements 11

    Hi all, would like to know if there was a manual available for download for Photoshop 11 and premiere Elements 11? Having a hard time working through the individual topics on the Adfobe web page. Thank you -

    Here are direct links to the pdf versions of the photoshop elements user guides:
    http://forums.adobe.com/thread/992825?tstart=0
    premire elements 11 pdf:
    http://helpx.adobe.com/pdf/premiere-elements_reference.pdf

  • Instillation of adobe photoshop and premiere elements 10

    I just purchased the combined package of adobe photoshop and adobe premiere elements 10 and installed it on my laptop.  I have windows 7 and a 64 bit processor on my laptop.  By mistake I started in installitaion with disc 1 which is for windows, instewad of disk 2 which is for windows 7 and a 64 bit processor.  When I insert disc 2, it says it will uninstall adobe.  My question is if I start with disc 2 and unstall what is already on there, will I lose all of the photos I have stored, or will it simply unstall the windows version which was wrong for the laprop, reinstall the correct verson for windows 7, and keep all of the photos? Help and thanks. 

    Hi there,
    of course only the program files will be deinstalled.
    Your photos will stay in place and are ready to be used as soon you installed the correct version.
    Regards
    Michael

  • Adobe story and premiere pro CS6

    There apparently is an incompatiblity between Abobe Story Plus and Premiere Pro.  How do I "number the scenes" in PP6? In the project window, there is no "number."  Nor in Adobe story, there is no "number" either. I've looked all the way through both. Help!

    Subbi - It is still not working. Let me start from the beginning.
    I have uploaded .m2t files in PP6.
    I start Story, hit New,  then hit Create.
    Then I hit Production>Manage Scene Numbers. Then a new window pops up. I click OK.
    Still in Story, in hit File>ExportAs>Adobe Export Interchange Format (.astx)
    Then I hit SAVE.
    Tab over to PP6.
    In PROJECT, find the Scene column. Set it to 1. Left click out.
    In PROJECT, with the clip selected, right click, scroll down to ATTACH SCRIPT FILE and click.
    A new box comes up. Select the .astx file, and click OK.
    It works up to here.
    In the Metadata Panel, I don't find the "Embedded Script Metadata," or the Metadata Display. One problem may be part of the old post was referring to PP5.5. I am using PP6.
    Help again!

  • Why is the upgrade for Adobe Photoshop and Premiere elements more expensive than just buying them?

    I currently have Photoshop and Premiere Elements 12 installed on my mac and when I go to upgrade to 13 the price increases from just buying the two because of the sale. Can I just buy them for the cheaper price and uninstall the current version? ..or do I have to upgrade and pay more money?

    I don't want to have several full versions! I wanted just to upgrade it.
    Whether you buy one "full" version and upgrade it several times or buy several "full" versions, after installation, the end result on your hard drive is exactly the same.
    The only difference between upgrade and "full" is the price you pay at the time of upgrading.
    If the "full" version happens to be cheaper than the upgrade then buy the "full" version. Nothing lost. Nothing gained.
    A "full" version actually makes your life easier since you only need to enter one serial number if you ever need to re-install. With an upgrade, you have to enter the upgrade serial number plus the earlier version qualifying serial number - people often lose the previous version serial number.

  • Cannot install Adobe Photoshop and Premiere Elements 10

              I am trying to load a new purchase of Adobe Photoshop Elements 10 and Adobe Premiere elements 10 on a new computer  operating with Windows 7 32 bit operating system.  The computer does not recognize the Instalation Disk and trouble shooting Microsoft says Disk burned with unknown Format.  The same disk will read on an old Windows XP computer.  This is a first time trying to load software.  Any help with this problem???

    If you are having a problem getting the disc to work, you can download the trial versions of the software from the page linked below and then use your current serial number to activate them.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    Photoshop/Premiere Elements 10:
    http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

  • How do I install Adobe Photoshop and Premiere Elements 11 on my laptop if it has no CD port?

    I have already bought both Adobe Premiere Elements 11 and Adobe Photoshop Elements 11. I want to install them on my laptop but my laptop doesn't have a CD drive. How can I install them??

    Downoad the trial version and activate it with your serial number.
    Mylenium

  • I will pay for help, Media Encoder and Premiere Pro C4 won't work together

    I know someone has two easy answers...help, help.
    Big Problem one, exporting from Premiere C4, forced into using Media Encoder, which sit there and won't encode from the project/timeline.
    The project is even small, 7 minutes, and I just want to me a AVI file and maybe Flash and Media Player.  Is that too much to ask.
    Then the versioncue.dll, decide to not let me right click in explorer and other links, get a windows error, and again, stuck with nothing.
    Please, I will send someone a gift card if they can help me, really. $25-$50...depending on if you have the solutions.
    [email protected]
    828-778-4854

    Stan, that's correct, however, it's a new computer now.  And yes, I want to
    export to avi from the premiere time line.
    One thing that is weird, I can add to Media Encoder only finished encoded
    files, say to send to a client in a media player
    or flash format, and all works well.  It's only the Premiere C4 project
    export????
    Thanks for any help you may be able to give me.
    Ernie Sigmon

  • SpeedGrade and Premiere issues

    Hi!
    I have a terrible Problem - I use the CC and therefore the dynamic link between those programs and everything works just fine until the point I want to render my graded project.
    SpeeGrade tells me to go back to Premiere to render it - but when the Project is back in there all of my colorcorrections are just lost - as if the hours of work didnt happen.
    I dont know if I am doing something very very wrong - HELP!

    Okay so I screenshot my whole process just to make it clear I got everything right
    1st
    my project in premiere -> file -> direct link to adobe speedgrade
    2nd
    this screen pops up and I click 'yes'
    3rd
    the project is loading in SG
    4th
    I choose my sequence and open it
    5th
    have my graded project in there
    6th
    I click the 'direct link to adobe premiere pro' button in the top left corner / or on the render tab in the top right corner - shows the same pop up window as shown - I choose 'yes'
    7th
    and whoop whoop we're back in premiere with no changes
    so now that it is clear how my workflow is - which does not differ from the one shown above as I understand
    I am left with the question how I actually apply then the changes in SG to the project
    simply by pressing enter with the grading layer selected?
    I only used one primary layer and one HDR layer max. - I dont even know if they have to be applied =/

  • Adobe Photoshop and Premiere Elements 11 installation problem

    I've just bought this program, and am trying to install it on my computer for the first time, but am getting an error when I try to play the Autorun.
    Then when I click "OK", I get an unreponsive screen:
    Any idea what I could be doing wrong?

    Lets give some time for the DVD to load and then click on open folder and run the setup.exe.
    Alternatively, you can try running that application from the desktop. http://helpx.adobe.com/creative-suite/kb/install-creative-suite-5-cs5.html

  • Adobe download and install issue

    I was able to download and install Flash without any issues.  When I try to download and install Reader I lose connection, then tries to reconnect then tells me to cancel.  This happens on XI, X and others versions.  I am using windows 7 professional. How can I get Reader to download and install?

    Initialize > download > open > run > downloading >
    then every time Lost Connection at 50%, reconnecting, cancel...
    When I check downloaded files it is there, but when I try to run it as administrator or otherwise it says not a win32 program.
    Thanks

Maybe you are looking for