Adobe Field is not set when an event is raised ( on press of button )

Hi Experts,
I need to set a flag ( FLAG1 ) when a button is pressed . This button raises an event EVENT1 in ABAP BE for triggering a roundtrip ) on Adobe Interactive Form.
I am using following script
data.#subform[0].Section3.ISR_FormEventButton::click: - (JavaScript, client) -
$record.FLAG1.value = "1";
xfa.record.CONTROL_PARAM.ISR_EVENT.value = "EVENT1";
ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
This does not seem to set the value.
Any Help will be appreciated.
Thanks and regards,
Amit.

seem you merged usage of formcalc and javascript although you specified your script as of type Javascript.
For example, the following reference syntax returns the value of the current object:
$ // FormCalc
this.rawValue // JavaScript
in the click event of button, type something like:
adobeFieldName.rawValue = "MyValue";
You can use below docs for scripting reference:
http://www.adobe.com/devnet/livecycle/articles/lc_designer_scripting_basics/lc_designer_scripting_basics.pdf
help.adobe.com/en_US/livecycle/es/FormCalc.pdf
regards,
BJagdishwar.

Similar Messages

Cannot add hub-managed content type with external list lookup columns to a list -- Error:Id field is not set on the external data field

This is a variation on the issue mentioned in this
post
We are using SP 2010 Content Hub to manage our content types. On the content hub we've created a couple of exteranl lists, and then created some site columns as lookups against these lists. We then added the columns to one of our content types
and set it to publish.
After the publishing job executed, I tried adding the content type (which now appears on the subscriber sites) to one of the document libraries on one of the subscriber sites. When I did that it threw the following error:
Microsoft.SharePoint.WebControls.BusinessDataListConfigurationException: Id field is not set on the external data field
at Microsoft.SharePoint.SPBusinessDataField.CreateIdField(SPAddFieldOptions op)
at Microsoft.SharePoint.SPBusinessDataField.OnAdded(SPAddFieldOptions op)
at Microsoft.SharePoint.SPFieldCollection.AddFieldAsXmlInternal(String schemaXml, Boolean addToDefaultView, SPAddFieldOptions op, Boolean isMigration, Boolean fResetCTCol)
at Microsoft.SharePoint.SPContentType.ProvisionFieldOnList(SPField field, Boolean bRecurAllowed)
at Microsoft.SharePoint.SPContentType.ProvisionFieldsOnList()
at Microsoft.SharePoint.SPContentType.DeriveContentType(SPContentTypeCollection cts, SPContentType& ctNew)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentTypeToList(SPContentType contentType)
at Microsoft.SharePoint.SPContentTypeCollection.AddContentType(SPContentType contentType, Boolean updateResourceFileProperty, Boolean checkName, Boolean setNextChildByte)
at Microsoft.SharePoint.SPContentTypeCollection.Add(SPContentType contentType)
at Microsoft.SharePoint.ApplicationPages.AddContentTypeToListPage.Update(Object o, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)   b55297ed-717f-466d-8bdc-297b20344d3f
I checked the external content type configuration and it did specify an "id column". Anyone know if what I am attempting to do is possible and if so, what special configurations are required?
Thanks

The issue is not External Content type or external list but the look up column.
It's not possible to publish a look up column via the Content Type Hub.
If you need to do this then an alternate way is to use a Managed Metadata column instead, otherwise you will have to implement this via a feature.
Varun Malhotra
=================
If my post solves your problem could you mark the post as Answered or Vote As Helpful if my post has been helpful for you.

Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

Problem Description
We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
Any input will be appreciated.
Thanks

OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
The information in this document applies to the following Enterprise Performance Management products:
    Calculation Manager
    Data Relationship Management (DRM)
    Enterprise Performance Management Architect (EPMA)
    EPM Workspace
    Essbase Administration Services (EAS)
    Financial Data Quality Management (FDM)
    Financial Management (HFM)
    Financial Reporting
    Foundation Services
    Interactive Reporting
    Planning
    Shared Services
    Web Analysis
Thanks!

The sort field is not used when ordering multiple cds in one alumn folder, how do I correct this?

It is using the track number and not the sort order field. The reason I have multiple cds in one alumn is because they are books on cd.

Sorry for the typo my "b" key was not working correctly.
The sort field is not used when ordering multiple cds in one albumn folder, how do I correct this? It is using the track number and not the sort order field. The reason I have multiple cds in one albumn is because they are books on cd.

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

Trigger Process chain at set time or when an event is raised.

Hi All,
I have a requirement where a process chain should get scheduled at fix time, say at 1:00 AM. Also, it should get scheduled when an event is raised by one BSP application. So, its like Set time OR Event should trigger the chain. Can you please guide, how can i implement this without using a special SM37 job?
Thanks and Regards,
Harpal

Hi Gohil,
The steps to create an event is as follows:
1. Create the event with SM62.
2. In the process chain, maintain your Start process. In the change selections screen, choose the button 'After event'. On the bottom, select your event. Click also on 'Periodic job'.
3. Activate and schedule your process chain. It will then be visible in SM37, waiting for the event.
4. Then you may raise this event from any ABAP program with function module BP_EVENT_RAISE. Each time you raise the event the process chain will start. You can raise the event also manually with SM64.
If you want to fix a time i.e., at 1:00 A.M, you need to got RSPC tcode --> click on the chain --> right click on Start variant --> Click on maintain variant --> Change selections --> Click on Date/Time --> Give the date and time.
If you want to ru7n your chain daily or weekly like periodically, check Periodic Job and click on "Period Values" and select accordingly. Now save everything and click on start variant and activate and schedule your chain.
Also check below thread for more info on Event:
Triggering a Process Chain From R/3 pgm
Regards,
KK.

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. Now the cursor moves but cannot select anything. Suggestions?

I have a 27" desktop mac running with OSX 10.6.8. The bluetooth keyboard started not typing when some of the keys are pressed. Plugged in a wired keyboard, started doing the same thing. When opening up a browser or application, the cursor moves but cannot select anything. Suggestions?

Maybe something in these Apple support articles will help.
Keyboard Doesn’t Work
Keyboard Keys Do Not Respond
Keyboard/Mouse – Troubleshooting Wireless

My new mac mini with Maverick does not go to deep sleep even if i press power button or Apple-Sleep mode.

Hi.
I have my new mac mini with Maverick that does not go to deep sleep even if i press power button or menu Apple-Sleep mode. He goes only to something like stand-by (power lid is on; after i turn off and then turn on the power he does not wake up just starting). I tried "sudo pmset -a hibernatemode X", tried mode 0,1,3, and even 25. nothing helps. he goes to deep sleep (when all data on HDD) only first time after i change hibernatemode couple times and force it to sleep. Today i even tried to force it to sleep (menu Apple-Sleep mode) and NOT turn off the power for whole night, in the morning he is in this "stand-by" mode anyway.
Could anyone help me please? i need it sleep but don't want to keep my power on for whole night.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Adobe Reader will not set as default application for .pdf in windows 8.1 pro x64

When I install adobe reader the icon/app changes from windows reader to Pick an app, I choose change and select adobe reader, the icons on my desktop flicker but nothing actually changes.Control Panel\All Control Panel Items\Default Programs\Set Default Programs\Set Program Associations, Select adobe reader, Choose defaults for this program, PDF is unticked so I tick it and choose save, go back in and it is unticked again??? Right click on a pdf file, choose open with, choose default program, use this app for all .pdf files is ticked, select adobe...Still nothing changes, stays on pick an app. I uninstall adobe reader then the pdf icon changes to and default opens with windows reader again. Reinstall adobe reader and back to the same thing. ???? I am a power user, build configure computers and subsequent software, started with DOS 6.0, learned unix/linux/networking concepts/networking security/server versions of windows/active directory. The only solution I could think of was to hack the registry which I looked for but could not find. I am running 8.1 pro x64, I just discovered that windows reader (which I cant uninstall) has the same problem when adobe reader is installed. Windows will not allow either one to be set as default while they co-exist.

After an extended session with chat only to be told that since Adobe Reader was free they could not help me :-(... I figured it out myself.
I opened a administrator: command prompt window and typed "regedit" Through extensive searching and stumbled on this key located at... HKEY_USERS\S-1-5-21-2274202122-2588692262-2244265822-1001_Classes\.pdf\OpenWithProgids The S-1-5-21...1001... is my current logged on user, your value may differ slightly. Typically the builtin disabled administrator account is 1000 and when you install windows and create a user account "John Doe" it will have administrator priveleges and be auto numbered 1001, every user account created therafter will increase by 1 ie...1002, 1003, 1004 etc. even if you remove (delete) an account and re-create it you wont get the same number, the system will use the next number in sequence. The old one will have been trashed never to be used again. Again here is the key...
HKEY_USERS\S-1-5-21-2274202122-2588692262-2244265822-1001_Classes\.pdf\OpenWithProgids I deleted this key under (default) on the right side...
Name                                                                       Type                                           Data
(Default)                                                                   REG_SZ                                    (value not set)
AppX86746z2101ayy2ygv3g96e4eqdf8r99j            REG_NONE                              (zero-length binary value) ---- This is the key to delete!!!
Personally I selected computer on the left side and the went to file/export then chose a file name [01 29 2014 regbackup.reg] and location. Then I selected "OpenWithProgids" and did the same thing,[pdf.reg] this saves a backup of the entire regestry and the key you are about to delete as a safety net. When you are done all you have to do is go to a pdf file, right click and choose open with...Adobe Reader - the box always use this app should already be checked.
I did this and it works yet because improper regestry modification can crash your system I am compelled to warn... Use at your own risk. If you are uncomfortable modifying your registry I would suggest consulting with someone qualified and has resources to do offline registry modifications/restorations which makes it VERY important to do the computer export registry backup.

Error: object variable or with block variable not set when creating journal

Hello
When I try to create a new journal, I get an error "object variable or with block variable not set"
This is happening with some computers but not all of them, the same user can create a journal in some computers.
I tried uninstalling and reinstalling BPC office client but that did not work.
Do you have any other ideas ?
Thank you in advance.

Hi,
You have to check first if you are able to access the reporting service frm that speific client machine typing:
http://<reporting server name>/reports. If all is woking well , you have to check also the number of default sheets for an empty excel sheet (should be 3) - I ma not sure what version are you using.
If still not work, please let me know when exactly the error appear, when you try to open the template (clicking on journal option) or after when you fill the report, save it, so on.
Best regards,
Mihaela

Structure field Umskd not found when access team calendar view in MSS.

Hello.
I am keep getting the following error message in my portal when access team calendar view in MSS portal. I am running EP 7.0 with ERP2005 as my back-end system:
com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(FcSelectionList.SelectList.Output.Ex_Request_List): structure field Umskd not found
    at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
    at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
Since I am new to MSS portal, I don't know what infor I am missing. Please advice.
Best regards,
Phuong.

Hi Vinod Patil,
I just get the problem solved. I may show you the way and hope it help.
First you should apply the SAP note 1058240 (I am in EA-HR 600 level 27 but we still need to apply) into R/3 server. This note is asking you to patch a .SAR (I have no idea on this file) and you may ask your basis to import it. Make should it is imported and the restart the portal server.
This is what we do to solve the problem. Thanks.
Regards,
WaiWeng

JAVA_HOME not set when running a task via CRON

On my Solaris 11 server I have created an entry in the root user CRON tab to launch a groovy based application every weekend. The application runs fine under a non-root user. When run by CRON however, the following error message gets emited:
groovy: JAVA_HOME not set and cannot find javac to deduce location, please set JAVA_HOME
Which is weird, as I have the following lines at the end of my /etc/profile file:
JAVA_HOME=/usr/jdk/instances/jdk1.7.0
export JAVA_HOME
GROOVY_HOME=/usr/local/bin/groovy-2.1.3
export GROOVY_HOME
PATH=${PATH}:${GROOVY_HOME}/bin:${JAVA_HOME}/bin
export PATH
Please advice me where to look for the cause of this problem.
Thank you in advance,
Dusan

I have the following command
/usr/local/bin/groovy-2.1.3/bin/groovy /usr/local/bin/backup/prune_old_backups.groovy
How do I add the JAVA_HOME variable into it?
Thank you,
Dusan

JDOM "IllegalStateException: Root element not set" when reading file

Hello, I am relatively new to XML. I am trying to read an xml document to parse some information out of it. I basically have a large amount of data I want to load into my program. I could program it all in as static arrays, but I thought xml would be easier, and make changes easier.
I am trying to use JDOM, and have the project set up. My problem is when I read the document, it always gives a root element not set exception. Here is my xml file:
<?xml version="1.0" encoding="UTF-8"?>
<root>
    Contents
</root>Very basic, I'm using this to get things started. Here is my code for reading it:
        SAXBuilder sb = new SAXBuilder();
        Document d = new Document();
        try {
            sb.build(new File("test1.xml"));
        catch (JDOMException jdome) {
            System.err.println(jdome);
        catch (IOException ioe) {
            System.err.println(ioe);
        d.getContent();Whenever I try to do anything with the contents of the Document, like d.getContent(), it always throws a java.lang.IllegalStateException: Root element not set. It reads the file successfully (as far as I can tell), but it's like the xml file is empty. I can't find anything on the web about this problem, and every tutorial says to do exactly what I've done, but never mention any possible problem. It can find the file, and I can write to an xml file as in other tutorials, but reading one in is a problem.
I chose JDOM because it seemed simplest for just reading in a large amount of data and parsing it out into variables. This is a very simple project, so I don't want to spend a lot of time writing xml parsing code, I'm only using xml because it will probably be easier than hard coding the data. Would a different xml api be easier to use for my purposes?
Message was edited by:
hunter9000

You must always give the browser an either an absolute URL from the top of
          the web server (not the
          web application) or a relative path from the current page.
          Sam
          "Vijay Kumar" <[email protected]> wrote in message
          news:[email protected]..
          > Hi
          >
          > I get the 'getResource is called when document root is not set.' error
          > when I access any files in the webapp with their absolute path.
          >
          > Environment: WIN/NT SP3, WL5.1 SP5 as the webserver and app server.
          >
          > My webapp located in d:\temp is deployed as foo
          > weblogic.httpd.webApp.foo=d:/temp
          >
          > For example:
          > I can access a file in d:\temp\secured\home.html using
          > test
          >
          > However if with in an html I try to access the file using the abs path
          > from doc root
          > test I get an error
          >
          > and I guess the default servlet looks for the servlet-context named
          > 'secured'
          >
          > Can someone tell me if I can set the documentRoot in the web.xml or
          > weblogic.xml
          > file OR if there is any other way to access to the file using the abs path
          > of /secured/test/test.html
          >
          >
          > Thanks in advance
          >
          > Vijay
          >
          >
          >
          >

Adobe Elements 9 not responding when saving changes

Adobe Elements 9 says not responding when I save image changes. I does eventually save the image changes but takes awhile. Is this normal? My computer is rinning Windows 7 and I have 8GB of ram so I don't think that ram memory is the problem. Thanks

In other versions of photoshop elements, you don't get the not responding
thing at the top of the screen when saving png files, but it still takes a noticeable
amount of time to save png's in other versions of photoshop elements and the full
photoshop version.
I haven't been able to find it yet, but there is a post somewhere in the photoshop forums
where an adobe photoshop engineer explained why png's take longer to save than most
other file formats, but ssprengel said something about the compression of png's which
sounds like the gist of the post.
There have been more than a few complaints about the not responding messages in pse 9
on windows machines for various operations, but as far as saving images, the not responding
message doesn't seem to hinder saving files, but it is very annoying.
You might try posting here where several adobe employees answer questions:
http://feedback.photoshop.com/photoshop_family/topics
MTSTUNER

Adobe Illustrator will not launch when Flash is running

A few of our users have reported that once Flash is running Adobe Illustrator will not launch. We are moving from Windows XP SP2 to Windows XP SP3. The version of both Illustrator and Flash is CS2 (will be upgraded later to CS3).
This used to work on SP2 - anyone can give some hints on this?

Nobody ever solved this

Adobe Field is not set when an event is raised ( on press of button )

Similar Messages

Maybe you are looking for