JAVA_HOME not set when running a task via CRON

On my Solaris 11 server I have created an entry in the root user CRON tab to launch a groovy based application every weekend. The application runs fine under a non-root user. When run by CRON however, the following error message gets emited:
groovy: JAVA_HOME not set and cannot find javac to deduce location, please set JAVA_HOME
Which is weird, as I have the following lines at the end of my /etc/profile file:
JAVA_HOME=/usr/jdk/instances/jdk1.7.0
export JAVA_HOME
GROOVY_HOME=/usr/local/bin/groovy-2.1.3
export GROOVY_HOME
PATH=${PATH}:${GROOVY_HOME}/bin:${JAVA_HOME}/bin
export PATH
Please advice me where to look for the cause of this problem.
Thank you in advance,
Dusan

I have the following command
/usr/local/bin/groovy-2.1.3/bin/groovy /usr/local/bin/backup/prune_old_backups.groovy
How do I add the JAVA_HOME variable into it?
Thank you,
Dusan

Similar Messages

Spark Classes and Skins not being included when running FlexUnit task via Ant

I have a series of unit tests that run on a spark component. This spark component has a custom skin defined for it, and that is working beautifully.
Inside that component is a spark list... By default, after digging into the list code, spark lists should use a default skin called "BorderContainerSkin". When I run the application that uses this component directly (whether compiled via FlashBuilder or via Ant/Hudson), the component itself runs and looks exactly like I would expect. When I run my unit tests in the browser (via Run As Web Application command on my TestRunner), the unit tests all perform as expected.
However, when I run the FlexUnit tests via Ant (either through windows non-headless, or linux headless), an exception is thrown with the following error:
Error: Skin for FromToList132.FromToListSkin133.VGroup134.fromList cannot be found.
    at spark.components.supportClasses::SkinnableComponent/attachSkin()[E:\dev\4.x\frameworks\pr ojects\spark\src\spark\components\supportClasses\SkinnableComponent.as:632]
    at spark.components.supportClasses::SkinnableComponent/validateSkinChange()[E:\dev\4.x\frame works\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:405]
    at spark.components.supportClasses::SkinnableComponent/commitProperties()[E:\dev\4.x\framewo rks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:419]
    at spark.components.supportClasses::ListBase/commitProperties()[E:\dev\4.x\frameworks\projec ts\spark\src\spark\components\supportClasses\ListBase.as:785]
    at spark.components::List/commitProperties()[E:\dev\4.x\frameworks\projects\spark\src\spark\ components\List.as:907]
    at mx.core::UIComponent/validateProperties()[E:\dev\4.x\frameworks\projects\framework\src\mx \core\UIComponent.as:7933]
    at mx.managers::LayoutManager/validateProperties()[E:\dev\4.x\frameworks\projects\framework\ src\mx\managers\LayoutManager.as:572]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:730]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
(Note: fromList is the id of the spark list used in the FromToList component.)
The issue is that the "BorderContainerSkin" class isn't ever getting imported along the way. I did several things that worked to "fix" the problem, but they are all hacky and don't explain the root problem:
1- If I explicitly import that skin into my test file, then everything works great.
2- If I add the <includes> directive into my mxmlc task in the Ant file, and again specifically call out that skin class, then again it will work.
However, how would I know what skins from the spark library are going to get included and which aren't? How would I know that a default skin isn't included or where to find it or even what it is?
It seems like either I'm missing something in my Ant file or there is a serious bug here with the FlexUnit task. Can anyone shed light on if this is a known issue, any permanent fixes (that don't involve keeping track of a long list of strings of class references), or anything that I might be missing?
Thank you for any help!

Guessing the ant tasks aren't forcing the include of the spark skins libraries... which is a little silly. I would assume the compiler would take care of this but it is something we can investigate...
Not 100% sure as to why, but this is what it sounds like.
Mike

SAP Gateway- environmental variables not loaded when running brconnect

Hello
i have installed the Sap gateway on MSCS
and the RFC check in sm59 is successful,
However when i run a job in db13 it fails with "brconnect is not recognized as ......... "
<sid>adm has all environmental variables set correctly
SAPService<SID> has them too
when i run brconnect on OS level it works fine with <sid>adm and SAPService<SID>
however if create a brconnect.cmd file where i specify the command as
SET ORACLE_SID= ....
SET SAPDATA_HOME=....
C:\windows\sapcluster\brconnect.exe ...........
and run it in sm69 it works fine
Any ideas how to solve this, seems the variables are not taken when running sapxpg
, i don't want to edit the SDBAC for every command
P.S
set from sm69 returns only the system wide variables, however i have the two systems on this host, and can not make the environmental variables for ORACLE_SID and SAPDATA_HOME system wide as this will cause problem with the other sap system
Edited by: Yavor Markov on Apr 12, 2010 6:07 PM

Hi Markov,
Can you tell us with which user id you have installed SAP as well as check the sap services are running with which user id, if it is not <sid>adm then you have to check the environment variables of that user.
Also you can try adding c:\windows\sapcluster in PATH environment variable.
Regards,
Kishore Soma

Unable to start java tools - Error : Environment variable JAVA_HOME not set

hi all,
I am not able to start the java tool - Visual Admin, Configtool, etc in the solaris Bash shell.
I was given authorizations on solaris and i'm able to view the logs and browse in solaris boxes,
But, when i try to start Visual Admin, it says" ERROR environment variable JAVA_HOME not set "
Since,my colleagues are using this tool for years, how come the environment variable is not set only for my user profile ?
Is it like the environment variable has to set seperately for every user profile ?
Do i need to set it initially for my profile eventhough it is working for others ?
i am confused..please help.
Addy

Nicholls, Thanks for your quick reply.
Ofcourse, I use my login ID to use java tools and they use their's obviously.I don't use <SID>adm.
We WRQ reflection for X-Windows and Putty for Command line Solaris Access.
When i try to use VA through the X-Window tool WRQ reflection, I am not able to start the tool.
My doubt here is, Do we need to setup the environment variable for every new user initially for the first time ? ( I am a new user for this environment )
Supposing if i need to setup the environment variable, do i need to set it up for the all the Solaris Boxes i use ?
I am able to browse through the files.when i try to start the VA by giving ./go i am not able to start it up.
Appreciate your time and valuable replies.
Addy

Getting error "Object variable or with block variable not set" when trying to open a FR report in studio

Problem Description
We are on FR 11.1.2.2.305 installed on AIX. a user is getting this error: "Object variable or with block variable not set" when trying to open a FR report from FR studio client installed on windows xp . Initialy, we thought it may be a FR client installion issue. We uninstalled and cleaned up registry and did a fresh installation of the client but the issue still persists. The FR server and the client are on the same version.
The user is a LDAP user who is facing the issue. We have confirmed with other users and they dont have any issue accessing FR report from their own client but when they try to connect from the users machine who is having issues, the others users also see the above error. All the users are ldap users and all belong to same shared services groups so the provisiong is the same.
Any input will be appreciated.
Thanks

OK, in this case of one single computer, please make sure that settings as per below KB document as in place and then validate the issue:
Internet Explorer (IE7, IE8, IE9 and IE10) Recommended Settings for Oracle Hyperion Products (Doc ID 820892.1)
The information in this document applies to the following Enterprise Performance Management products:
    Calculation Manager
    Data Relationship Management (DRM)
    Enterprise Performance Management Architect (EPMA)
    EPM Workspace
    Essbase Administration Services (EAS)
    Financial Data Quality Management (FDM)
    Financial Management (HFM)
    Financial Reporting
    Foundation Services
    Interactive Reporting
    Planning
    Shared Services
    Web Analysis
Thanks!

How do I enlarge the "presenter notes" window when running my presentation on an external display?

In the latest version of Keynote, the "Presenter Notes" window is a small horizontal field at the bottom of the presenter's computer screen. Only 3-4 lines of text can be seen. This means that when you have a few paragrahs of notes, you have to scroll through them as you are presenting. This is very cumbersome. In the previous version of Keynote you could change the relative size of the slides versus the "presenter's notes" boxes when running a presentation on an external display, but in the new version, I can't find a way of enlarging the "presenter's notes" field.
Also, in the new version, the preview slide doesn't show the initial text on the next slide if that text emerges as a "dissolve in" build when you advance forward through your slides. I always have the initial text on my slides automatically "dissolve in" after each slide transtion. But in the new version of Keynote, when in presenter mode, I can't see any of the text on the "next slide." This makes it difficult to anticipate what slide comes next . . . without going to the Navigator. Does any one have a solution for this?
Thank you.

I figured it out with the help of a post from a few days ago. Although posted for a different problem, I followed these steps from Cornelia-I and it worked like a charm:
You can change the link of LR to the images from the network drive to your local drive, best done on parent folder level: right-click the highest folder in library left panel, and choose update storage location. In the opening dialog window point it to your internal folder.

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Multitouch on track pad not working when running Windows 8 in boot camp

Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

very very few gestures are supported in windows
https://discussions.apple.com/message/24548533#24548533
if it's a limitation from ms you need to contact them
if it's a limitation from apples drivers you can use feedback channel
http://www.apple.com/feedback/

SyncToy 2.1 Can't Find NAS Folder When Run From Task Scheduler

I'm using SyncToy 2.1 to keep two WIN7 computers and a Synology DS414j NAS drive in sync. I have several folder pairs configured, some between the two PC's and three between one PC and the NAS drive. I have a task set up for automatic syncing. The problem
is SyncToy can't find the destination folders on the NAS drive if it's run from Task Scheduler. If I run SyncToy manually, everything works fine. I've even tried opening the command prompt and running the exact same program Task Scheduler is running (SyncToyCmd.exe
-R), and it works perfectly. But when Task Scheduler runs the task, it fails to find the NAS folders with the following error message:
SYNC: 08/21/2014 14:12:26:140: *** Failed to execute folder pair Downloads to NAS. Could not locate folder \\DISKSTATION\Downloads\.
I've been looking for days for a solution and have not found anyone with this problem. Any ideas?

Hi Texxxas,
Apparently the problem is not with SyncToy, it is with Task Scheduler. If you have had Task Scheduler work for you in the past, then I don't have an answer for that. I have never been able to get Task Scheduler to work correctly with SyncToy and a NAS drive.
I have found that for some reason it works with USB external HDD's but will not work with a network connected hard drive. The same bug exists in Win8.1 as well. However, I have since found a third party task scheduler that works perfectly with SyncToy and
my NAS drive. It is called System Scheduler by Splinterware. The free version only works when you are logged in but they have a paid version that runs as a service and will execute without being logged in. This has solved my problem.

Error when run Process Chain via BPC NW

Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
Adriano

Hi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano

I am getting a framing error when running a VI via RS-232. Any thoughts?

I have a Keithley 2700 multi meter and am trying to get its IDN. I am getting error number 800, on the multimeter, back when running the VI

A framing error indicates that you don't have the same serial parameters set the same on the pc and on the instrument. Double check baud rate, parity, data bits, and flow control and make sure they match.

Under regular user account Firefox closes its windown right after opening it, but this does not occur when run from administrator account.

I don't have the problem on Vista or XP. I have no problems when I am logged on as administrator. When logged on as a regular user some or all of the Firefox windows will open and then immediately close. It does not help to run as administrator or set other compatability options. I also see this on Thunderbird. I have not seen this problem on any of my other software.

I don't have the problem on Vista or XP. I have no problems when I am logged on as administrator. When logged on as a regular user some or all of the Firefox windows will open and then immediately close. It does not help to run as administrator or set other compatability options. I also see this on Thunderbird. I have not seen this problem on any of my other software.

Sqlora11.dll not found when running Pro*C application on 11g server

Hello,
Here is my environment:
Workstation: Windows XP (32bit) with Oracle Client 11g 32bit
Server: Windows 2003 server 64bit with Oracle 11g 64bit
I have a Pro*C program that I have been able to pre-compiled, compiled and linked on my workstation using Mingw/gcc compiler and standard include files (sdtio.h...) from MS Visual C++ 2005 Express Edition.
Precompilation: E:\app\oracle\product\11.1.0\client_1\BIN\proc.exe iname=Fill_Translated.pc oname=Fill_Translated.c userid=xxx/yyy@my11gDB code=ansi_c parse=full mode=oracle dynamic=oracle lines=yes sqlcheck=semantics errors=yes sys_include="C:\Program Files\Microsoft Visual Studio 8\VC\include" include=("E:\app\oracle\product\11.1.0\client_1\precomp\public","E:\app\oracle\product\11.1.0\client_1\oci\include")
Compilation: c:\mingw\bin\gcc.exe -c Fill_Translated.c -o Fill_Translated.o -Wall -I E:\app\oracle\product\11.1.0\client_1\precomp\public -I E:\app\oracle\product\11.1.0\client_1\oci\include
Link: c:\mingw\bin\gcc.exe -o Fill_Translated.exe Fill_Translated.o -L E:\app\oracle\product\11.1.0\client_1\precomp\LIB\ -lorasql11
The result is an executable file that gets connected to an 11g database hosted on a w2003 64-bit server, opens a table with blob fields and expands the blob content into a target table (one blob source record generates thousands of target records). Everything works fine when running from my workstation.
For some reasons, this executable file must run on the O11g server itself. So I copied and pasted the executable file on the server and tried to run it. I thought it would work...
But I get the following error message in a popup window: This application has failed to start because orasql11.dll was not found. Re-installing the application may fix this problem.
At this point, I do not know anymore what to do to solve this problem !
Does it come from the fact that the complete build have been done on a Windows 32bit platform and the server is a 64-bit platform ?
Do I have to install a O11g 64bit client on my server to make it work ?
Do I have to rebuild everything from the server, meaning that I must install a kind of development environment on my server (Mingw/gcc and so on) ?
Is there something to change in the registry of the server or in the path environment variable so that this dll is found ?
Any others ideas ??
Thank you for your answers.

Actually, I do not have any O11g client installed on my Oracle server. But the DLL exists in my $ORACLE_HOME/lib on my server, more precisely in E:\app\dev_ora\product\11.1.0\db_1\BIN.
As I built my executable file on a win32 platform with O11g client 32bit installed, I was wondering if the same executable file copied onto the server was not trying to find the relevant 32 bit library on my win64 platform, which of course does not exists as I have only a 64bit version of this library !! Would-it be the cause of the problem ?
Does an O11g 32bit client installation on my Oracle 11g 64bit server would solve the problem ? Any inconvenient to have on the same server both an O11g 64bit server and an O11g 32bit client if it appears to be the solution ?

Web dynpro application not available when running iview wizard

When I run the iview wizard to create a web dynpro iview I find the folder local/<MyProjectName.
But when opening myProjectName folder the Application is missing, so I cannot create the iview.
When running the web dynpro Content Administrator I find the application in the ProjectName folder, but when I try to run it I get the exception:
com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyTestApplication' in repository.
What could be the issue?
B.r
Olof

Hi Siva,
I tried this but it still doesn't work for me:
I get this error
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Cannot open repository for application 'MyApplication'.
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:316)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.checkAuthentication(ClientUserFactory.java:244)
     at com.sap.tc.webdynpro.services.sal.um.api.WDClientUser.checkAuthentication(WDClientUser.java:217)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.checkAuthentication(RequestManager.java:626)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:144)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.tc.webdynpro.repository.utils.RepositoryException: Did not find application 'MyApplication' in repository.
     at com.sap.tc.webdynpro.serverimpl.core.repository.AbstractServerRepository.getApplicationInternal(AbstractServerRepository.java:167)
     at com.sap.tc.webdynpro.serverimpl.wdc.um.ClientUserFactory.isAuthenticationRequired(ClientUserFactory.java:307)
     ... 22 more
Edited by: Olof Trönnberg on Aug 20, 2009 12:42 PM

JAVA_HOME not set when running a task via CRON

Similar Messages

Maybe you are looking for