Adobe form error ADS: #com.adobe.ProcessingError: Invalid usage right:
Hi Experts,
I 'm trying to create my first adobe form and when i have run this without passing the fillable value and english language is displays fine but i cannot enter the values at run time.Its a print format. but when i'm trying to pass the values during the run time as form is fillable and language is EN then i have catched this error.
ADS: #com.adobe.ProcessingError: Invalid usage right: E(200101).
Test for function group /1BCDWB/SM00000001
Function module /1BCDWB/SM00000001
Uppercase/Lowercase
Runtime: 5.793.933 Microseconds
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message:
ADS: #com.adobe.ProcessingError: Invalid usage right: E(200101)
Please suggest how to resolve this.
Regards.
Ruchi.
Hi Ruchi,
I think you are trying to pass some values to the form at runtime.
and then when you are tying to see the print preview you are getting
this error.
first thing that needs to be checked is the ADS (Adobe Document Server)
may be your ADS is down and/or misconfigured; refer to config guide on service.sap.com/adobe.
you can go to SM59 and see the configuration or look for a basis guy to do it for you...
and if it is still not solved can you elaborate what king of values are you passing to the Adobe Form.
regards
shaleen
Similar Messages
-
Dear All, We have configured ADS in DEV and QAS it is working fine. We have done the same configuration in PRD but it is giving the following error when we execute the program FP_CHECK_DESTINATION_SERVICE: SYSTEM ERROR: ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: XMLFM Exception during render: org.omg.CORBA.COMM_FAILURE(200,101). Exception of class CX_FP_RUNTIME_INTERNAL System Info : SAP ECC EHP6 SAP NW 7.31 Kindly suggest some solution. Regards, Mustafa
HI
Note 944221 - Troubleshooting if problems occur in forms processing
Note 717568 - FPRUNX001, 002 or 004 with output of PDF-based forms
Note "959462 - ISR/Adobe/Web Dynpro Java: Configuration problems"
Note 1288500 - HR-RU: ADS: XMLFM Exception-P(200101) message no.FPRUNX001
Note 1143442 - Shift report: Error "ADS: XMLFM Exception"
AND YOU CAN CHACK AGAINST FOLLOWING Problem:
1). Check the JCO RFC from Java to ABAP server.
2). Check the ADS connection in SM59.
Check the document more troubleshooting steps
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ec0508-9438-2c10-f393-a41fb255698d?QuickLink=index&overridelayout=true
http://forums.sdn.sap.com/thread.jspa?threadID=842415 -
Hi,
In our development system CD2(ECC backend system) when I am acessing t-code PHAP_CATALOG_PA->Category Group/Category/Template>Zero Harm>DRA JKSW2>Preview --->Print Layout giving below error.Here PD7( Dev portal ) is acting as frontend.
Error :
ADS: com.adobe.ProcessingException: Could not retrieve(200101)
Message no. FPRUNX001
Diagnosis
An error occurred when Adobe Document Services (ADS) was launched.
System Response
Error message
Procedure
When troubleshooting, follow the steps described in SAP Note 944221.
First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. From SAP NetWeaver Release 7.0, the program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
Please help in this case.
Regards
NileshHi,
Perform the ADS configuration check as specified in : http://help.sap.com/saphelp_nwmobile71/helpdata/en/43/f0638873b56bede10000000a11466f/frameset.htm
You need to check all the configuration steps to makesure everything is setup right. Also, try after restarting your Java engine where ADS is installed. Check your ADS RFC connection using SM59 tcode, and check whether ADSUSER and ADS_AGENT are not locked.
Try and let know.
Regards,
Shahid. -
Hi folks,
I created a new Adobe Interactive Form which is quite simple. There's just a header and the personal number of an employee to be printed. I binded a structure (contains 10 fields) to the context and de-activated all of the fields except the field personel_number (defined as CHAR8).
The form is ok when it's execuded by TA SFP.
Running the form via a print program it aborts with "ADS: com.adobe.ProcessingException: X Exception - P(200101)".
When I deactivate the personel_number in the context the form the error does not occur.
The ADS works well. FP_CHK_REPORT and FP_PDF_TEST_00 report no problems.
My problem is quite similar to [ADS: com.adobe.ProcessingException: com.adobe.Processin(200101); just the other way round.
Regards,
SteffenI fixed the problem on my own. There were probably 2 bugs:
1. I deleted the form, the interface and the ddic objects. Then I started from scratch that means creating again ddic objects and the interface. When I created the form I recognized the layout type "standard form". I'm quite sure that this option was not selectable on form I deleted.
2. It also could have been that the data structure of the context contained wrong data e.g. a numeric field contained non-numeric stuff (X'00')
Maybe these informations are helpful for somebody.
Regards,
Steffen -
ADS: com.adobe.ProcessingException: Error exporting Data into PDF
Hi Experts,
when trying to upload a PDF file to my WD4A application and extract the data I am getting this ADS Error:
ADS: com.adobe.ProcessingException: Error exporting Data into PDF - PDF Exception: Invalid object for the XFA entry in the forms dictionary.(200201).
The error only appears when I`m trying to upload a PDF file that has been created after an Java Script Update of the Adobe Form Builder. My actual version is 710.20070621204053.403203.403203 - ContainerFoundation_JS.
All PDF files created before this update can be uploaded without problems. Am I missing something to be updated?!
Thanx & best regards,
OliverDear Oliver,
I am facing this problem, can you recall how did you resolve this, please ? Thank you.
Regards
Kir chern -
ADS: com.adobe.ProcessingException: PDF is not interactive
Hi All,
I have a ECC 6.0 ABAP SP12Stack installation and a seperate NW04s SP13 Portal installation. I have done all the configuration steps of ADS integration on those 2 systems.
I developed a WebDynpro application and used the interactive form object referring to a simple Adobe form created with transaction SFP. As I test the Webdynpro ABAP application I get the following error "ADS: com.adobe.ProcessingException: PDF is not interactive. Data can only be imported into interactive forms.(201501)" in UPDATE_PDF method of class CL_WD_ADOBE_SERVICES. Do you have any idea for the reason of this error?
Best Regards,Hi.
Can it be applied to AS Java version too? Our system was updated from SPS12 to SPS16, and the following problem comes up:
com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException: Processing exception during a "MergeData" operation.
Request start time: Wed Oct 08 16:49:20 BRT 2008 com.adobe.ProcessingException: PDF is not interactive. Data can only be
imported into interactive forms. Exception Stack Trace: com.adobe.ProcessingException: PDF is not interactive. Data can only be
imported into interactive forms. at com.adobe.ads.remote.EJB_PDFAgent.importFormData(Unknown Source) at
com.adobe.ads.operation.MergeData.execute(Unknown Source) at com.adobe.ads.operation.ADSOperation.doWork(Unknown
Source) at com.adobe.ads.request.Request.processOperations(Unknown Source) at com.adobe.ads.request.Request.process
(Unknown Source) at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source) at
com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source) at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120) at
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at
java.lang.reflect.Method.invoke(Method.java:324) at
com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126) at
com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157) at
com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79) at
com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92) at
SoapServlet.doPost(SoapServlet.java:51) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet
(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at
com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process
(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run
(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.doSoapCall(PDFObject.java:400)
at com.sap.tc.webdynpro.pdfobject.core.PDFObject.inputPDF(PDFObject.java:4003)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInputPDFHandler.handle(PDFDocumentInputPDFHandler.java:139)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:100)
The Interactive Form was working well before the update. As soon as we set our patched Web Dynpro development environment to use an ADS not yet patched, it works perfectly.
Regards,
Douglas Frankenberger -
Hi All,
While i'm trying to activate FORM (Interactive Form in Transaction SFP), i'm getting error -
ADS: com.adobe.ProcessingException: Class not found exception while loading class SAPForm, classpath: /usr/sap/AHS/DVEBMGS00/exe/jstart7 1.jar/usr/sap/AHS/DVEBMGS00/exe.
Could anyone let me know the way to resolve this issue.
Thanks and Regards,
SunilMany Thanks for the reply-It's working now
I added the MySQL connector in the following manner
1)Open the Tom Cat server console by Selecting 'Servers' in Package Explorer
2)Right Click 'Tomcat v5.5 at localhost.server'
3)Select 'Open Launch Configuration' under 'General Information'
4)Select the 'Classpath' tab in the Edit configuration window that opens
5)Select 'Add External Jars' and add the required connector -
ADS: COM.adobe processing exception could not retrieve a password
Hi,
I am getting the error while clicking onto the print preview option at VF03. I am not able to get any output after that. Please help to resove this issue. The print preview report is in Adobe format.
ADS.com:Adobe processing Exception could not retrieve a password for credentials:reader rights(200,101)
regards
rajHi,
That error message would sure to seem to point that the credentials are not accessible to the user that ADS webservice call is being made by,
Check for user credential
Check for below url as well
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/e8cc48abee49f082dfbd5b45d98dd4/content.htm
Hope it helps.
Cheers
Deepanshu -
ADS: com.adobe.ProcessingException: Unable to load or c(200101)
Hi,
We configured ADS and it was working fine.
Now it is giving me an error "ADS: com.adobe.ProcessingException: Unable to load or c(200101) "
when i execute FP_TEST_00 program where as it is giving me the version info when i execute FP_PDF_TEST_00.
All the settings are in place but it is giving me this error and am unable to get any solution for this.
Please guide me with a solution.
With Regards,
Pradeep.BDear Nelis,
We saw the ADS trace file and we found that Operation properties file was missing.
As we have moved to the new server, we copied the properties finle in the new server and the problem is solved.
Thanks for your valuable suggestions.
With Regards,
Pradeep.B -
Anyone every run into this error after saving a PO?
Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
The full message is:
System ID.... PR3
Client....... 100
User......... ELBURGD
Transaction.. ME21N
Update key... 4EC42600E07900E1E10080000A14402B
Generated.... 17.11.2011, 06:09:20
Completed.... 17.11.2011, 06:09:24
Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
Using SM13 it says:
Function Module: RV_MESSAGE_UPDATE
Status: Update was Terminated
Class: FPRUNX Number: 001
FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
This happens seemingly randomly in production after the user saves a PO. They'll create a PO, save it, get the PO number , start a new PO and a message box pops up saying:
Express document 'Update was terminated' received from author 'xxxx xxxxx'
If the user goes back to the PO to look it up, the PO does not exist. If the user creates a new PO (or recreates the one that failed to commit to the database), it'll save with no trouble... same print settings, same everything. This leads me to believe the problem isn't with the PO form but with the ADS. The PO form is custom and works without error in dev and QA. I do believe the users are setting the message options to Print Immediately.
I am unable to recreate the problem in dev or QA, and it appears randomly in production. I've run the ADS test programs in production and they come back without errors.
Has anyone run into this before? Are there some settings on the ADS that might need to be adjusted? I don't think this is form related since we're able to recreate the same PO and save without error immediately afterwards, but could this be a form problem?
I am open to any and all experiences you've encounted, and any suggestions you may have.
Jeff KulbethRecently I had the same error with Adobe Form. In my case there were a few problems regarding data binding and data format. In a Form there was unresolved data binding warning and data format mismatch with one field - Form interface contained variable of type decimal and in the Form content that variable was bound to the field of type numeric with data format integer. Adobe Form with such kind of issues can be activated without errors but during Form call you get error FPRUNX001
So my advice would be to consider things like:
Resolve data binding warnings. Its in the Report palette witch by default is located in the bottom left corner of the vertical palettes bar.
Check that Form interface data types match with Form content fields data formats in data binding sub-menu.
Also in your Form calling application you can trace ADS by using these function modules:
FP_GET_LAST_ADS_ERRSTR - provides texts about the cause of the error
FP_GET_LAST_ADS_TRACE - provides a trace of the Adobe document services -
ADS: com.adobe.ProcessingException
Hi Experts,
When I am trying to convert pdf document to XML through ADS, I am getting below error message.
"ADS: com.adobe.ProcessingException: Error exporting Data into PDF - PDF Exception: Invalid object for the XFA entry in the forms dictionary."
I've searched forums, but I cannot find any exact answer to this issue.
Can anybody help ?
===
DATA: l_fp TYPE REF TO if_fp,
l_pdfobj TYPE REF TO if_fp_pdf_object,
l_pdf TYPE xstring,
l_data TYPE xstring,
l_fpex TYPE REF TO cx_fp_runtime.
Get FP reference.
l_fp = cl_fp=>get_reference( ).
TRY.
Create PDF Object.
l_pdfobj = l_fp->create_pdf_object( connection = 'ADS' ).
Set document.
l_pdfobj->set_document( pdfdata = l_pdf ).
Tell PDF object to extract data.
l_pdfobj->set_task_extractdata( ).
Execute, call ADS.
l_pdfobj->execute( ).
Get the result.
l_pdfobj->get_data( IMPORTING formdata = l_data ).
CATCH cx_fp_runtime_internal
cx_fp_runtime_system
cx_fp_runtime_usage INTO l_fpex.
PERFORM error USING l_fpex.
ENDTRY.
Thanks in Advance
RaghuHi Raghu,
I could see in that PDF Exception: Invalid object for the XFA entry in the forms dictionary that the issue could be with the data entered in the form which cannot be mapped correctly to SAP data types. See Otto's better answer in that thread.
Best regards,
sandra -
Adobe form error while calling through SE80
Hi All,
We have done the ADS configuration in our server and it is running fine but when calling the adobe form through SE80 (Web Dynpro) its giving the following error-:
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_WD_GENERAL', was not caught and
therefore caused a runtime error.
The reason for the exception is:
WebDynpro Exception: ADS: com.adobe.ProcessingException: Could not retrieve a
password for credential: ReaderRights(200.101).
When I searched I came to know that we need to install a PKCS #12 file.
Correct me if I m wrong.
In Directory path I:\usr\sap\XIT\SYS\global\AdobeDocumentServices\TrustManagerService\trust
Certificates,Credentials and CRls directories are empty.
Pls suggest
Regards,
PrashantPlease check the following link for step by step configuration of credentials :
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03414f8-d4ce-2a10-d4b6-ab201b329d98]
and the below link for temporary license :
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70aa75cc-6ac3-2910-c78c-ade192ec861e]
Thanks
Naresh -
ADS: com.adobe.ProcessingException: XMLFM Exception in ABAP Webdynpro
Hi All,
When I test the ABAP Webdynpro with Adobe form embeded in it. I get very unreliable results. When trying to bring up the forms, sometimes, it comes up the 2nd attempt, sometimes after several attempts.
And the error message is :
ADS: com.adobe.ProcessingException: XMLFM Exception - PDF render operation exception, reason code: 20484 : Font Helvetica_Normal_Normal could not be found(200,101)
I have checked several notes: 944221, 717568 etc........but no use.
I also have checked the test programes in SA38, user account, sicf services and destinations. It seems everything is ok except the program FP_CHECK_DESTINATION_SERVICE in SA38. The test result is the same as the unreliable result of the ABAP webdynpro app.
Any usefull hints to solve this problem..thanks in advanceHello,
the message tells you about one (of possible many) problem. You must maintain your fonts to fix the message. Or there is a single option (I use this when I am in a hurry and don´t have access to the customers basis) - change the fonts: Use for example Myriad Pro, that always worked for me.
Use this help: http://help.sap.com/saphelp_nwmobile71/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
or wander around for other useful hints and tips.
Regards, Otto -
Hi everyone,
When trying to print a customer specific sales invoice form, the
following message appears in the log of execution:
"ADS: com.adobe.ProcessingException: com.adobe.ads.excep(200101)"
The message number is "FPRUNX001".
The detail message says to execute the steps of note 944221 but no
improvements after performing these steps.
What is the reason for this message and how can it be solved?
I saw some older threads in the forum talking about this issue but no answers have been given. So I hope that someone knows this one.
Best regards,
SylvainHi everyone,
Thank you for all your answers. We were able to find the problem. It was due to a field that was defined larger than permitted on the second page of the form. It was defined larger than the sub form and the page width.
The error was not really related to the ADS definition itself and therefore the message text was not relevant in this context.
By the way program FP_TEST_00 was not dumping because of a standard syntax or form error but because some parameters have to be initialized to be able to call the form. If you run the program you will see that no form parameters can be entered. You always pass some parameters (Structures, Tables, Fields, etc.) to a form to run it correctly. Considering this fact, I do not understand how can this program be run?
Best regards,
Sylvain -
ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
Hi,
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message:
ADS: com.adobe.ProcessingException: XMLFM Exception - P(200101)
I am getting the above error while executing adobe forms function module.
Any ideas.
Regards,
Thiyaguthe J2EE User Management Engine has a configuration for setting an expiry date for passwords. Because of this setting, you can get an error after the password expires. (see documentation at http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/16c43bdd3da244a1d3372a77b5f83f/frameset.htm) This could be a reason here.
Try this:
Check the user ADSUser in the Visual Admin: -> Server -> Service -> Security provider -> UserManagement tab
-> ADSUser
Enter a password again and check 'No password change is required'.
Maybe you are looking for
-
I tried to add this in the topic already open but it kept sending me through the unending rabbit holes! My question is: How do I figure out what release I was on, get rid of this one and got back to a functional firefox that moves in realtime. I alre
-
Problem in assets at the time of upload
Hi All I have a problem. In the month of Feb. 2009 we went for upload of assets from our previous company code to new company code.. All the assets were uploaded through FB01( manually). The asset report got tallied with the GL balances in March 200
-
Error installing ODB+OBIEE in one machine and OWB in another one
Hello, I have two machines with Oracle Linux 5: Machine 1 --> Oracle Linux 5 (64 bits) + Oracle DB 11g R2 + OBI 11g R1 Machine 2 --> Oracle Linux 5 (32 bits) + I would like to have here OWB 11g To install OWB in the machine 2 to have access to ODB in
-
Adding People to an Organization
In the address book I can create a new "Organization". However, when I click the "People" tab (while creating or editing the organization) I see no way to add people/contacts to the organization.
-
HT4623 how to sunchronize outlook contacts
Hi , I have been trying to update contacts by syncronizing my i phone with Microsoft Outlook in my laptop ,dirst time when i connected my iphone with my laptop and opened itunes it did transfer open up an option of email account and contact sync but