Adobe Forms F140_OPI_LIST_01 and F140_ACC_STAT_01

Hi,
in this case i have two questions.
1. I have the problem, that i don't know, how can i put both forms together in the customizing. If i used SAPScript the form F140_ACC_STAT_01 was the Open Item List and the Accounting State. But now with the new technologie Adobe this are two seperated forms.
Both forms are using the print programm RFKORD10_PDF, but i can only assign one form to the print programm in the customizing. If i want to do the same with the open item list, it isn't possible, because i have a same entry (for the accounting state) in the customizing.
2. I put in the customizing the entry for the balance confirmation. Print programm is SAPF130D_PDF and the form called F130_CONFIRM_01. But i only get as the print preview the SAPScript form. Have i to make same more settings to run the print with the pdf forms.
Thanks a lot for answering my two questions.
Greetings
René

Hi,
Thank you for your reply.
I tested and results is "No objects were found for the specified selection".
Can you explain me what is missing? And what are the steps that I need to do?
I'm just ABAP /4 programmer, But I'd like solve this for FI.
Best regards,
Ana

Similar Messages

HI Iam trying to get into my account in Adobe Form Central and when i click on sign in..not working

HI Iam trying to get into my account in Adobe Form Central and when i click on sign in...the screen shows " this page cannot be displayed" is there a problem with the site?

I just found that Amazon web services does have a network issue with one of their instances that is affecting some regions around the east coast, this could be affecting your ability to sign into FormsCentral. They will likely have that back up soon and assuming that could be the issue it should be fixed shortly.
Thanks,
Josh

I am trying to convert a PDF into a document that can be edited - it's a client feedback form. I am using Adobe forms Central and it's saying that it can't use my document.

I am trying to convert a PDF into a document that can be edited - it's a client feedback form. I am using Adobe forms Central and it's saying that it can't use my document.

Hi Michelle ,
We are extremely sorry that you have had a bad experience with Adobe .
As far as your issue is concerned ,Acrobat generally prompts for internet connection as it is required to activate the product before you could use it comfortably .Once the product is activated or licensed you would be able to use the software offline .
This could be the possible reason you are experiencing this .Please check if you have done so and still facing this .And if you have not ,you need to license/activate your product by typing in your credentials ,i.e Adobe ID and password .
You could also refer the following link to get updated about the activation of your product .
https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html#a ctivate-how-to
Regards
Sukrit Dhingra

I need to know if my membership(s) with Adobe Reader XI, Adobe Forms Central and Acrobat XI products are still active? If so; when does my membership(s) due to expire?

9 May 2014
Dear Tech or Customer Support:
I would like to know if my subscriptions memberships with Adobe Reader XI, Adobe Forms Central and Acrobat XI products are still active? If so; when does my subscriptions memberships due to expire?
Please reply back by email with full details as to my requests at your earliest availability to: [email protected]
Sincerely,
Gwendolyn C. Baxter

Hello,
I just solved this problem on my computer.
Windows 7 comes with only one "Voice" installed. "Microsoft Anna - English (United States)" I'm not sure what you get if your in another country.
You can test your "Voice/Voices" by running Microsoft Narrator. Click [Start] button and type "Narrator" in the [search programs and files] box. Press [Enter]. Your computer should begin talking. Click [Voice Settings] button to see a list of installed voices. Take note of the voices listed. "Mine has just the one."
Adobe Reader must have a voice selected that you have installed. To verify your settings Run Adobe Reader. From the top menu click [Edit] then click [Preferences] at the bottom of the list. In the Preferences window click [Reading] from the left hand list. Find "Read Out Loud Options" Un-check [Use default voice] Choose a voice from the drop down menu that you have verified is installed on your computer. Click [OK]
My Adobe Reader had 4 voices listed to choose from. I found this curious because I only have one voice.
Hope that helps.

ADOBE form interactive and non-interactive... (HR)

Hi,
I'm trying to get in touch with SAP web applications (webdynpro, adobe form, bsp...).
I have the following requirement:
I have to provide a page within the sap enterprise portal to allow the employee to track his presence. In this page the employee has to check a presence/absence flag and in another page he can justify his absence with some reason.
I didn't find a standard functionality to meet this requirement, so I think a new form has to be created.
As additional requirement this form as to be stored as PDF document and it is not needed to store the information contained in the form in the sap backend system. The information contained in the form has to be stored in a non-sap system, so this information should be available as flat file to be imported in the non-sap system.
I'd like to understand the possible scenarios from a technical point of view to create the required functionalities.
ADOBE Interactive Form.
This is a webdynpro (java or abap) that contains the adobe component. The fields of the adobe component are linked to the sap backend system and are editable. The adobe component reads some data from sap bakend system and stores the values filled by the employee via the adobe component in the backend system.
ADOBE non-interactive Form
A webdynpro (java or abap) or a BSP has to be built to create some values, then once the user save/submit the information a PDF document is created with the information created in the previous page.
What is the difference between ADOBE (non-interactive) Form and ADOBE Interactive Form? The difference is that the first one is not editable? There is a big difference in terms of complexity develop an interactive or a non-interactive adobe form?
BSP that generates the PDF as output?
Could you please provide some input/defintion/sample to clarify this topic?
Thanks in advance
MP

Reader credential rights missing. Now it works.

Adobe Forms: date and number display format

Hello all,
I am new to Adobe Form, and I am quite unimpressed with how difficult it is to do the most simple things.
I have managed one way or another to solve all my problems until now, but this one got me stuck.
I have date and number fields in my form, and here is what I want to do but cannot (beware, it is impressive): I need these fields to be displayed using the defaults date and number settings of the SAP user who is generating the form.
Anyone has an idea of how that can be achieved?
Thank you.
Moderator message: please post again in the dedicated forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on Feb 24, 2011 1:53 PM

Hi Thomas,
For these kind of issues you will get many answers if you search the forum.
If your requirement is to display the current date in the form, just drag and drop the "Current date" UI element from the Library palette -> Custom.
If it is to get the date from SAP and display, pass date to the context node and just drag and drop the field into the form from the data view.
Check the following wiki by Chintan. It explains some common scenarios in javascript.
[JavaScript Part 1|http://wiki.sdn.sap.com/wiki/display/ABAP/JavaScriptforCommonScenarios-PartI]
[JavaScript Part 2|http://wiki.sdn.sap.com/wiki/display/ABAP/JavaScriptforCommonScenarios-PartII]
Use an 'if' condition, check the value and based on the value you can make the field hide/visible in the form.
Hope this will help.
Thanks & Regards,
Sanoosh

Urgent : Regarding Adobe Forms ,Scripts and Smartforms

<i>
Hi Floks
Any body having Adobe Printing Forms ,Scripts and Smartforms documents Links can you send me to me . Its will be help full to me
thanks
suresh</i>

Hi Suresh,
SCRIPTS
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVSCRPROG/BCSRVSCRPROG.pdf
http://www.thespot4sap.com/articles/SAPscript_Introduction.asp
http://www.onestopsap.com/sap-miscellanous/sap-script/
http://sap.niraj.tripod.com/id19.html
http://help.sap.com/saphelp_45b/helpdata/en/65/897415dc4ad111950d0060b03c6b76/content.htm
http://www.thespot4sap.com/Articles/SAPscript_commands.asp
Smartforms
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm

Adobe forms - Email and fax

Hi,
Does anyone have any idea about how a adobe form(tcode-SFP) can be sent through email and fax?
I have created an interest form and have to send it accross to the customer maintained in the customer master when i run transaction code FINT.
Help will be highly appreciated.
Regards,
Rasika
Moderator Message: There is a seperate forum for Adobe Interactive Forms. Please post your question there.
Edited by: kishan P on Nov 2, 2010 11:26 AM

Hi,
Thanks for reply
The link u mentioned utilises Objects.. but can we send internet mail using this?
As we cannot change RECIPIENT TYPE in this case in the object.
I used this format in the program but the attachment is going to EXpress inbox. and goes to my SAP Inbox instead of Email .
So what changes we need to do for this.
Alternatively, can we use FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' for this purpose?
Edited by: Rohit Pareek on Feb 3, 2009 3:36 PM

Adobe Forms ( Lifecycle and cloud Ver) Versus IBM Forms ( FEB and Lotus Forms)

Can sombody please educate in the advantages offered by Adobe Forms versus IBM Forms? can sombody specifically speak about the following TCO, Usabilty, Security, digital Signatures etc.?

Dear PAUL....Thanks alot for the directions you gave me, i'm really learning alot from the posts of you an STEFAN CAMERON, and as you said that many databases have a built in web services, i found some .wsdl files within the oracle database directories and i will read how to use or how to build new one.
And about the intermeadiary process solution and as i said before that i'm totally new to livecycle designer, do you mean to build two forms one connected to the database and act as a middlware and the other is connected to database through the first? forgive me for this question ,i'm new to this.
And away from data connectivity issue i posted 2 discussions at "LiveCycle Designer ES" that confused me , i'm sure it can be achieved by designer but i don't no how ,one on dealing with dropdown lists & the other on pdf's security and saving . I really appreciate if you and the others can help me with when you have enough time.
Thanks alot PAUL
Mustafa

Printed Adobe Form - pagination and data content problem

I have been making changes to HR Appraisal Forms and all goes well except when I want to paginate a section.
The text is in a value string.
I define a flowed subform with direction Top to Bottom. binding None
Subform Pagination Place > Following Previous    After > Continue Filling Parent If Dataset Paginated > Goto content area (there is only one content arrea defined in this form
Allow Page breaks within content.
I have a table object within the Subform. Place > Following Previous    After > Continue Filling Parent If Dataset
The table has a Header row Place > Top of Next Page (this works fine) checked Include Header Row Initial Page and Subsequent Page
the Table row (body) Pagination Place > Following Previous    After > Continue Filling Parent If Dataset
When I test with more data than fits on page I get overflow and pagination with the Header on both pages.
The bad the data that overflows to the new page is the same from the start of the first page, it repeats. aso the second page has the content the length of what the overflow data would have been.
How do I get the data NOT to repeat from the beginning on the second page?   This should have been easy but I have tried almost everything to correct the problem EXCEPT define all the objects as subforms and use Acessibility to make them work as table or row. Please remember that I am NOT trying to make an interactive form and just want printed overflow.

Hi,
It allows the save as from a process point of view there speaks nothing against having long notes. And in the smartform print and in any other online UI in PM (R/3, BSP, WD) the notes are displayed correctly.
The PDF is just another UI component, and the only one with the issue. To be honest, I think the SAP note is a rubbish answer, and an easy way out. Yes, in general it is better to have short notes on element level and longer pieces of text in an attachment.
But logically speaking, the PDF thing is just plainly a bug.
But we can talk short or long about it, in the end SAP is the one with the final answer
Regards and Groetjes,
Maurice Hagen

ADOBE Forms Central - add and remove rows (PDF Form)

Hello, I am currently evaluating ‘ADOBE Forms Central' to set up a form with editable fields. I have set up a test form in ADOBE Forms Central and was unable to insert an option to add and remove rows similar to the print screen attached. Is this possible to do using ADOBE Forms Central or should I be using
a different ADOBE application? Thank you, Liz

A dynamic XFA PDF form can do this. You can create such forms with LiveCycle Designer, which was included with the Windows version of Acrobat Pro prior to version 11. It is now a separate product.
XFA forms can't be used with FormsCentral, however, only Acroforms can.

Populate Default Dynamic Filename In Adobe Form (On Click of Save in Menu) - SAP

Hi,
We have a scenario in which we want to populate the file name dynamically in Adobe form integrated in SAP Webdynpro.
Scenario -
A adobe form has been intergrated in the SAP webydnpro application which opens the form in Web Browser (IE).
There is a save button which is part of standard adobe form menu and on click of that save button (circled - 1 in image ) the name of the form ( i.e techincal name of adobe form created in SAP {ZTESTSS} ( circled - 2 in image ) appears.
We want to change the default name to (employee_date_time ) on click of save.
We have found a approch by using the folder level javascripts (http://forums.adobe.com/message/2266799#2266799%232266799).
In case we use folder level scripts "where should we write the JavaScript code in the Adobe Form to trrigger the this script on click of Save Button (in the menu)?"
Also is there any other apporch which does not require folder level javascript as its a security issue also we need to maintain in all the user systems.
Please let me know the approch to address the issue.
Thanks .
Tausif

Hi,
you can't change the behavior of the save button in the browser nor in Reader/Acrobat.
You can add a custom button within your form which calls a custom script from a folder level script using the browserForDoc method.
The browseForDoc methos is the only one whcih can change the name in the saveAs dialog.
Here's an example., you can run from Acrobat console.
You need to combine it with the solution from the other thread to make it work with your form.
http://forums.adobe.com/message/2266799#2266799%232266799
var oRetn = app.browseForDoc({
    bSave: true,
    cFilenameInit: "MyForm.pdf",
    cFSInit: "",
if (typeof oRetn !== "undefined") {
    this.saveAs({
        cFS: oRetn.cFS,
        cPath: oRetn.cPath,
        bPromptToOverwrite: false

How to Fill value in Input fields before displaying ADOBE FORM

Hi to all,
Please can anyone tell me how to fill the entry in ADOBE FORM before displaying?
I have written a program to generate ADOBE FORM, but I need while displaying ADOBE FROM some input field should already be filled by value and can not be changed.
Please can anyone tell me how to do that in program?
Below is the program.
DATA: fm_name           TYPE rs38l_fnam,
        fp_docparams      TYPE sfpdocparams,
        fp_outputparams   TYPE sfpoutputparams.
Parameters: p_pdf_form_name type fname.
fp_docparams-langu   = 'E'.
fp_docparams-country = 'IN'.
fp_outputparams-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = fp_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name     = p_pdf_form_name
    IMPORTING
      e_funcname = fm_name.
E_INTERFACE_TYPE           = E_INTERFACE_TYPE
CALL FUNCTION fm_name
    EXPORTING
      /1bcdwb/docparams        = fp_docparams
IMPORTING
    /1BCDWB/FORMOUTPUT       = fp_outputparams
    EXCEPTIONS
      usage_error           = 1
      system_error          = 2
      internal_error           = 3.
CALL FUNCTION 'FP_JOB_CLOSE'
   IMPORTING
    E_RESULT             =
    EXCEPTIONS
      usage_error           = 1
      system_error          = 2
      internal_error        = 3
      OTHERS               = 4.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Jul 25, 2011 2:57 PM

Hello,
you need to provide the information via the interface, which you create for the Adobe form.
And then pass this values via the following function module inside your generation report.
CALL FUNCTION fm_name
check standard report : FP_EXAMPLE_01 as an example!

Adobe form in Web Dynpro Submit Button Problem

Hi all,
I've created an Adobe form as a UI element in Web Dynpro as a development component. In this Adobe form, I've included a "Submit to SAP" button from the Web Dynpro Library.
My whole purpose is to expose this DC as a callable object into Guided Procedures and then run this process, so that the Adobe form(embedded in Web Dynpro) can be seen and allows the user to enter information online into the form or download(maintain offline) and click on the submit button. After clicking of the button, I need the control to return to the GP framework to trigger to the next action. I have configured the button in the Adobe form as a submit format -> XML data and with submit to URL "%com.sap.caf.gp.if.PostProcessorUrl%". I did this because I want it to return the control to GP framework. However, there is also another option of the event submit button in the Web Dynpro UI Adobe element -> event-> onSubmit.... i created an action onsubmit which has the code wdThis.wdGetBformController().complete();
When I run the GP process, the adobe form appears and when i click submit button, nothing happens... Does anybody know the solution?? Thanks!

Hello,
Can somebody tell me if i really need to put this code
"%com.sap.caf.gp.if.PostProcessorUrl%"
in the submit button. If so, do i need to configure somewhere what the PostProcessorUrl is? If so, can somebody tell me where i need to do this?
Thx in advance.
Kind regards,
Maarten.

Adobe form called from WDA - Translation Problem

Hi,
I have maintained French translation for the Adobe form using GOTO->Translation inSFP transaction.
when i check in the developement system it is working fine.I have captured the translations in transport request using program
RS_LXE_RECORD_TORDER and moved it to testing system.
The changes are available in SFP but not visible when we execute the WDA HRASR00_PROCESS_EXECUTE as it is called from this application.
Please let me know how to resolve this issue.
Thanks
Martina

Hi ,
As the form is related to ISR scenario in customizing client , I saved the adobe form there and transported customising request which resolved my issue.

Adobe Forms F140_OPI_LIST_01 and F140_ACC_STAT_01

Similar Messages

Maybe you are looking for