Adobe Forms Response Table View

Can you format table so the data default view is at top of cell?

Thanks for the clarification.
If you apply the style change after selecting the entire column, as shown below, the style is applied to the column and is inherited by new rows.
Regards,
Brian

Similar Messages

ADOBE Form Using Table with dynamic number of rows

Hi All
First some information about our infrastructure:
- AdobeDesigner 7.1 in the Developerstudio
- SAP-Portal 7.0 SP15
I have a View with tabstrips and behind the tabs i have defined an event. On one Tab I included a ADOBE-Form with Table. The Data for the PDF sould only filled in the context for the Form when i jump to this Tab. I created the Form by using this documentation [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0859ad1-53aa-2a10-78ae-99e41c407669].
To fill the tablecontext I use the following Code:
IPrivateAnlegenBANFView.IPositionenElement position = null;
IPrivateAnlegenBANFView.IPositionenNode posNode = wdContext.nodePositionen();
int NUM_5_TIMES = 5;
for (int i = 0; i < NUM_5_TIMES; i) {
IPrivateAnlegenBANFView.IPositionenElement posElement = wdContext.createPositionenElement();
+posElement.setMaterial("" + i);+
+posElement.setKurztext("Test" + i);+
+posElement.setWarengruppe("Warengr" + i);+
posNode.addElement(posElement);
If i put this code in the wdDoInit method it works fine and shows me 5 Rows. But if I put the code in the Action of the tabstrip it shows me only one row. I checked the entries of the context and there are 5 entries (showed them in a WD-Table).
Can someone tell me what im doing wrong?
Thanks for a answer and kind regards
Pascal

Hi All
finally i found the solution for the problem.
When you define the interactive Form in the view do not define the property "dataSource" of UI-Element Interactive Form it seems, that the binding is static and not dynamic.
Add the following source to the viewCotroller
Global Part of the Source:
private static IWDInteractiveForm form = null;
Method wdDoModify:
if (firstTime) {
form = (IWDInteractiveForm) view.getElement("InteractiveForm");
When you have an Event where you fill your Contextnode which you want to display in the table of an Adobe Form Use this code:
Action:
public void onActionFillTab(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent ){
//@@begin onActionFillTab(ServerEvent)
* Code to fill the Node for AdobeForm Table
form.bindDataSource(wdContext.nodeTabelle().getNodeInfo());
//@@end
If you want to clear your table and show it directly use in the action the following code:
wdContext.nodeTabelle().invalidate();
form.bindDataSource(wdContext.nodeTabelle().getNodeInfo());
Kind regards
pascal

Using Adobe Forms in Webdynpro views

Hi,
I'm learning Abap-webdynpro, in this i've worked on some sample applications(tutorials) given in the help library. I need to learn using Adobe forms in the views of the webdynpro components. I tried with help library, but not so clear about how to use forms in views,
So can u please send me some links or materials which describe how to use adobe forms in webdynpro applications..
Thanks in Advance,
Sachi

Hi ,
I hope this link will be usefull
<u>https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/f057d803-3c53-2910-db92-a6a2f1cc7334 [original link is broken]</u>
Here are some very useful links on Adobe Software for Forms.
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf
http://www.adobe.com/enterprise/partners/sap.html
http://www.sap.info/public/INT/int/printout/article/Category-28943c61b1e60d84b-int/0/articleContainer-18393415bdc39551ae/
http://sdn.sap.com/irj/sdn/adobeforms
Thanks and Rgds,
Kamal<a href="http://">http://</a>

Update fields from Adobe Form to Table

Hello,
I want to integrate Adobe Form into Webdynpro ABAP Application in which I want to have 2 fields which need to be updated to a DB Table.
For this first I created an Interface in Transaction SFP , added 2 import parameters of type <Table Type>-<FieldName>. Then I created a Webdynpro Component created a new I Interactive Form UI Element and binded the Context of the Form to the Interface.
Then I added 2 fields to the form from Data View . Everything is fine but when I run the Webdynpro Application the fields are not available for Input.i.e. They are in the ReadOnly Mode.
The 'enabled' property of the Interactive Form is checked.
Please help.
Any help would be highly appreciated.
Thanks.
Edited by: SAPEPDeveloper on Feb 7, 2011 11:45 PM

Hi,
The process explained is ok, but I can explain you a better way.
1) Create the webDynpro Component first.
2) Create the context nodes as per the requirement.
3) From the 'integration' panel drag and drop the Interactive form UI element into the view.
4) Bind dataSource to root context node.
5) Check enabled property true.
6) Give a template source name (ZName).
7) On double clicking the template source, system will prompt you to enter the interface name. Map context node to the interface.
8) Interface gets created automatically and the lifecycle designer gets opened.
9) Goto the properties tab and give layout type as 'ZCI Layout'
10) Drag and drop required fields from the data view to the layout designer.
11) Insert webdynpro script from the Utilities
12) Edit -> Form Properties -> Defaults -> XDP Preview Format should be dynamic
13) Drag and drop 'Submit Button' from Library palette -> Webdynpro native controls
On clicking the submit button at runtime you will get the control in the webdynpro submit event.
Above all these you have to check with your basis team, that the 'usage credentials' have been applied while configuring the ADS. Go to SE38 and run the program 'FP_TEST_IA_01' and check whether it is giving an error message or not.
Hope this Helps.
Thanks & Regards,
Sanoosh

Form response tables

Hello,
Is it possible to add tables in your View Responses tab that are also linked to the form fields?
Right now the All Responses table has columns that are linked to Form fields, but when you add a new table I cannot seem to find the option to add links to form fields there.
The reason I ask is because we have a form but not all fields are relevant for everyone that views the responses of the form. I would like to create new sheets in the Responses tab with tables with information containing only the fields that are relevant for certain employees.
Regards,
Kenneth

Hello JaeSenK,
Unfortunately, we cannot currently accomplish this very easily. There is a way to get there, but it's fairly convoluted. In essence, what you will need to do is:
assign values to your choices (1, 2, 3, 4, etc)
Add a column to contain a string representing the selected choices: =concatenate(Field 1)
Add a column for each choice option, where the column will contain either a blank or the text of the selected choice. For example, the first of these columns would contain an expression like: =if(isError(find("1", <columnFromStep2>)), "", <text for choice 1>)
Add a final column to construct the string value. Just say that you had 4 choices, and so have added 6 new columns (1 for step 2, 4 for step 3, and one more for this step): H, I, J, K, L and M. Column M, the column created for this step, would contain an expression like: =concatenate(if (H1:L1, H1:L1 & ";", "")). Unfortunately, this will give you an extra semi-colon at the end (so, instead of "answer 1;answer 2", you'll get "answer 1;answer 2;").
For bonus points, we can add a (final) final column with an expression which will strip the extra semi-colon left by step 5: = if(len(M1) > 0, left(M1, len(M1) - 1), "")
If you are interested in persuing this, let me know and I can give you step-by-step guidance in accomplishing it.
I hope this helps,
Marco

All Records are not getting displayed in adobe form from table

Hi All,
I Want to display records from table to Adobe Form Table .
But While Displaying only some of the records are getting displayed How can i display all the records in next pages of adobe form.
Its Urgent PLZ Reploy soon.
Thanks & Regards
Kiran

dear friend,
please check the adobe format, must be match to
the data base format.
pls go to the setting and adjust the data base table.
if nothing is going click the radio button
html format.
that will work.
rewards are expecting.
vivek

How to handle Adobe Form - Dynamic Tables.

Experts:
I am new to Web DynPro for ABAP and Adobe Interactive forms.
I have created a Adobe form with dynamic table. When I submit the form, WD4A is able to read only the first row of the table. Other rows are getting lost.
I thought just binding with the context will trasfer data from Adobe to WD4A. But it is not happending.
Do I need to write any code in WD4A and any script in Adobe Designer?
Can any one send me a sample code (ABAP and JavaScript). Even link to that will be very useful.
Thanks,
Vijai

Thomas:
My context is as follows.
<CHANGING>
<REQUISITION_ITEMS>
    <ELEMENT..1>
    <ELEMENT..2>
    <ELEMENT..3>
The cardinality of <CHANGING> node is 1..1 and the cardinality of <Requisition_items> is 1..n.
Thanks
Vijai

Adobe Forms : Adjacent Table printing

Hi All,
I have copied standard adobe form PYXXFO_SAP_PAYSLIP_US2 payslip into custom one.
in standard form output in page is as below
EARNINGS
wtno wttext          rate number amount
TAX
wtno wttext          rate number amount
DEDUCTIONS
wtno wttext          rate number amount
What I want to do is print Earnings and Deduction adjacently on same line, can anyone help me in this, please?

Hi Santosh,
Change the layout as per your requirement. Wrap the earnings and deductions table in subforms as below:
Subform1
->Subform2(Earnings_table, Earnings_total)
->Subform3(Deductions_table, Deductions_total)
The content type of subform1 should be flowed(Choose it from object->subform->content in subform property).
Flow direction should be Western text.
The content type of subform2 and subform3 should be flowed and flow direction should be top to bottom.
Adjust the size of individual columns of both tables so that they can fit in layout side by side.
Hope it will give you an idea to proceed further.
Regards,
Vaibhav

Attaching photos to an Adobe Forms response

Good Morning:
Is it possible to attach a photo / photos along with responses to an Adobe Forms survey form? I would like to send a marketing survey to our physicians and have them attach a photo of themselves to the survey. Please advise, thanks.

Jim
What's abnormal about it? That's how you were always meant to do it.
The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves. If you're willing to risk database corruption, you can restore the older functionality simply by right clicking on the iPhoto Library and choosing 'Show Package Contents'. Then simply make an alias to the folders you require and put that alias on the desktop or where ever you want it. Be aware though, that this is a hack and not supported by Apple.
And, if you think it was not necessary then bear in mind that today on the v6 forum there are at least three people who have done this, and that's just this morning.
Regards
TD

Is there any software which displays all form objects - tables, views, etc?

Dear friends,
I need to know if we have some software product which opens an Oracle form and shows all objects (tables, views, procedures, functions, and so on) accessed by it.
For each form, this software should show all operations made in each table - that is, whether form creates, updates, reads or deletes data in each table accessed by the form.
If there's any software which makes such analysis, please let me know. I'd rather be downloading free software, but a trial version or a paid one can be considered as well.
Best regards,
Franklin

Hello all,
sorry, I don't know whether my 1st message was clear, so I am trying to rewrite it.
I'm thinking about a software which creates a database objects list report; this report shows all database objects being accessed by the form - for example, it can list all tables being accessed by the form, showing a CRUD (Create, Read, Update and Delete) for each accessed table, or list all packages being executed by the same form, and so on. For example:
Form: CLI0001.FMB
Package -> Operation
PCK_ACCOUNTS -> E (Execute; but that's a suggestion, we can have 'R' instead)
Table -> Operation
ACCOUNTS -> CR (Create + Read)
PAYMENTS -> D (Delete)
Sequence -> Operation
SEQ_ACCOUNTS -> R (Read)
View -> Operation
VW_CLIENTES -> R (Read)
If there's any software which can do it, please let me know. Thanks in advance.
Best regards,
Franklin
Edited by: franklinbrasil on 15/10/2008 19:26

Adobe forms with table

HI ,
I NEW IN ADOBE FORMS I WAS CREATE ONE CUSTOM TABLE HAVEING 4 COLUMS IN THAT 4TH COLUMN IS AMONT FIELD. I WANT TO ADD TOTAL AMOUNT DISPLAY IN SEPRATE NUMERIC FILED. WHILE I ENTER DATA INTO IN THAT COLUMN AUTOMATICALLY ADD AMOUNT AND DISPLAY IN ANOTHER FIELD. PLZ HELP ME

HI,
You search a FP* more number of Standard Adobe Forms there...
Regards,
Ansari

Form Submit = Table View Update

OK,
I have been trying to get this to work and am probably
missing something easy here. My goal is to have a user submit info
using Ajax and have the table on the bottom update on submission.
My observer works when clicked but I can't seem to link the refresh
to the table to update.
Tried -
onClick="ADDUSER( ['email','dept','div'], ['resultdiv'] );
dspsmUserTable.loadData();"> No refresh
Added a refresh button to manually do
"dspsmUserTable.loadData();" Works fine.
Is there any ideas/examples out there yet.
Thanks, Matt

Hi widgeter,
1. First of all, I think you have a call to
Spry.Utils.loadURL in your ADDUSER function in order to
submit your user-data to server, but you should also register a
callback in order to refresh the users table only after a response
comes from the server (after the user has been inserted into
database).
Please check Kin's post:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=602&threadid=1214689&fo rumid=72
2. Also, you need to make sure that {useCache:false} is set
to your dspsmUserTable DataSet, like this:
var dspsmUserTable = new
Spry.Data.XMLDataSet("path/to/users/page", "/xpath/to/nodes",
{useCache:false});
Regards,
Dragos

Adobe form nested tables layout

Hi,
I have an xml input described by a schema including 3 level nested table like this:
Table1
__col1 col2 col3
__Table2
____col1 col2 col3
____Table3
______col1 col2 col3
In Adobe LC I have no problem to link the tables using Subforms but the PDF layout I get is very width because the subforms are lined up horizontal one after the other and some columns contains long strings.
I would like to place Subforms vertical with some indent, and get a layout more like this:
Table1 columns (first occurrence)
__Table2 columns (rows related to table1 first occurrence)
____Table3 columns (rows related to table2 first occurrence)
Table1 columns (second occurrence)
__Table2 columns (rows related to table1 second occurrence)
____Table3 columns (rows related to table2 second occurrence)
And so on.
When I try to move a Subform one under the other I get warnings about lost reference.
Please give me a hint how to do this.
/K-E

Thomas:
My context is as follows.
<CHANGING>
<REQUISITION_ITEMS>
    <ELEMENT..1>
    <ELEMENT..2>
    <ELEMENT..3>
The cardinality of <CHANGING> node is 1..1 and the cardinality of <Requisition_items> is 1..n.
Thanks
Vijai

Putting Adobe Forms (Response Files) Online

I have created an online application form. Though the location of my form resides on my computer (I also uploaded the form to a website). The response file is located on my home computer.
When people fill out the form and click submit, it only works if my computer is attached to the Internet which has frequent downtime, so I want to place the response file (I think that is what I have to do) on a website I have hosted that is always up 100% of the time.
Though I can edit the file location of the response file, it does not allow me to put in website information.
1. Is all I need to do is place the response file on my Internet Web Site to ensure that it will work 100% of the time and users won't get a message?
2. How do I do that?

My question doesn't quite fit under this category - but I cannot seem to submit a new questions. So here it goes....
I am creating three different forms for an upcoming international conference. I would like to include a submit button on the form. I would like this to result in the PDF file being sent to an online storage file (not Acrobat's site) such as Google sites.
When I edit the properties of the button there is a field labeled "Enter a URL for this link" and I am assuming that this is where I could set this up, but I've not been able to figure out how.
Alternatively, what is that field labeled "Enter a URL for this link" for anyhow?

Adobe forms nested table layout

Hi,
I have an xml input described by a schema including 3 level nested table like this:
Table1
__col1 col2 col3
__Table2
____col1 col2 col3
____Table3
______col1 col2 col3
In Adobe LC I have no problem to link the tables using Subforms but the PDF layout I get is very width because the subforms are lined up horizontal one after the other and some columns contains long strings.
I would like to place Subforms vertical with some indent, and get a layout more like this:
Table1 columns (first occurrence)
__Table2 columns (rows related to table1 first occurrence)
____Table3 columns (rows related to table2 first occurrence)
Table1 columns (second occurrence)
__Table2 columns (rows related to table1 second occurrence)
____Table3 columns (rows related to table2 second occurrence)
And so on.
When I try to move a Subform one under the other I get warnings about lost reference.
Please give me a hint how to do this.
/K-E

Hi Prakash,
Thanks for your reply.
I tried it..... but nothing came out...
Is there any alternative for this...
My Hirearchy is like this...
Main Table (SubformA - MainSubform) set as flowed, repeat for each data item
Maintable-field1 Maintable-field2 (Subform) set as positioned
Inner table (table subform) set as flowed
Innertable-field1 Innertable-field2 (subform) set as positioned
I linked the Maintable and the Innertable in the context in the 'Where Conditions' tab
Kindly review the above hirearchy and reply...
Guys please help me.... I am in an urgent state and need to complete this ASAP.
I will give full points for all of u guys...
Please.... please... please....
Thanks in advance.
Jaffer Ali.S

Adobe Forms Response Table View

Similar Messages

Maybe you are looking for