Adobe interactive form in wd abap

hi,
When i set the enabled property to true for the interactive form in WD ABAP, it either doesnt display the form or the form comes in display mode,
Can you please tell me know if any,
Thanks,
Saujanya

Hi Saujanya,
The interface of the UI element InteractiveForm contains the method
SET_LEGACY_EDITING_MODE, which in turn contains a Boolean parameter. The form is
then ready for input when
● The parameter has the value X.
● The property enabled in the UI element InteractiveForm is selected.
The following code fragment shows how this input readiness can be set up:
method WDDOMODIFYVIEW.
data: LR_INTERACTIVE_FORM type ref to CL_WD_INTERACTIVE_FORM,
LR_METHOD_HANDLER type ref to IF_WD_IACTIVE_FORM_METHOD_HNDL.
check first_time = abap_true.
LR_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT(u2018INTERACTIVE_FORM_1u2019).
*Replace INTERACTIVE_FORM_1 with Property 'ID' of your UI element InteractiveForm
LR_METHOD_HANDLER ?= LR_INTERACTIVE_FORM->_METHOD_HANDLER.
LR_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( abap_true ).
endmethod.
Regards,
Runal

Similar Messages

Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

Dear All,
i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other parts of the editor or he wanted to save what he did...
Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
Thank you for your help in advance.
All the best, P. Phil.

Yes, you need the lifecycle designer installed. That should be enough to work with the SFP transaction. But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
Regards,
Rich Heilman

Drop down in dynamic table in the Adobe Interactive Form (Web dynpro ABAP)

Hi All,
I have scenario use drop down in dynamic table in the adobe interactive form (Using the button the dynamic table row will be increasing and decreasing).
Assume I Add five rows dynamically in the dynamic table. The Last column contains Drop down.
I have button in the adobe form.
Button Name = u201CSAVEu201D
Button type    = SAP Submit button (Native type u2013 I am Using ZCI).
While clicking save button, I need to store the dynamic table datau2019s to back end system. I can able to store the data to back end system. After form data getting saved those particular values need to display in the adobe form.
Here I am facing a problem.
I cannot able to view as a default value in the drop down, which I have selected some values after save operation I am not getting any values in the drop down as a default.
Example:
The dynamic table contains 5 rows (Each and every row Drop down contains one to ten values).
1)     I have selected second value in the Drop down (ROW1)
2)     I have selected fourth value in the Drop down (ROW2)
3)     I have selected fifth value in the Drop down (ROW3)
4)     I have selected seventh value in the Drop down (ROW4)
5)     I have selected third value in the Drop down (ROW5)
I press the save button that particular Drop down value gets saved in back end system and that particular values want display in the Drop down as a default value.
How to resolve this problem.
Regards,
Boopathi M

Hi,
Solve the problem .
I have created the New node for dropdown. also i have one node already for table.
The new node i bind to dropdown, the table same for table.
Its working fine
Boopathi M

Dropdown List in Adobe Interactive Form Using Webdynpro ABAP

Hi Pals,
In my scenarion I need to list the Rating Code in the Dropdown list box of the Interactive Form.
Form Created by using SFP transaction
Not XML Schema interface
Passing the values to the Form by using the default function module that which created automatically while creating the Form
Am binding the Field and also binding for the list Item. Even though the values are not listing.
$record.sap-vhlist.<Field name>\.DATA\.FIELD.item[*]
I have followed the above format , but no use ...
Field Name : rating_code
$record.sap-vhlist.RATING_CODE\.DATA\.FIELD.item[*]
Field Name : value
$record.sap-vhlist.VALUE\.DATA\.FIELD.item[*]
but it is not working for me, will appreciate if some one really help me to fix this.!!!!
Thanks & Regards
Andy.

For the form buttons to work on-line in your WebDynpro app, you need to change the PDF form to be Dynamic:
     if(firstTime){
          // We need to set the PDF to be Dynamic, for the form JavaScript code to work
          IWDPDFDocumentInteractiveFormContext pdfContext =
          WDPDFDocumentFactory
          .getDocumentHandler(wdThis.wdGetAPI(), "InteractiveForm")
          .getDocumentContext();
          pdfContext.setDynamic(true);
In this code segment, "InteractiveForm" is the UI id.
I was able to get that far, but I although I add subforms dynamically via javascript, the mapped WebDynpro context node doesn't pick up any new elements.
ie: if I start with two WD context elements (0..n) cardinality, then add a third via the form JavaScipt button, I see changes only in the two context elements when I submit. A third context element isn't created or populated.

Offline Adobe Interactive form from SFP ( ABAP )

Hi all,
I searched on sdn but could not get a firm answer for following questions :
1. Is it possible to use digital signature on offline forms - for which inbound processing is done by sap mail on ABAP side?
2. What all data sources ( like webservice ) is possible if I develop from SFP ?
3. If I use webservice - how can I map webservice interface to context?
Thanks and regards,
Amit.

Hi Otto,
Thanks for your inputs.
Let me clarify my questions further :
For question 1 - What I am asking here - Are there standard ABAP API's available for veryfying Adobes digital signatures ?
For question 2 - When we enter in ALD via SFP - some data connection options are disabled. Also there is no option for RESTful service/ secure wsdl connection - are they supported with ALD 8.1 ?
Thanks and regards,
Amit.

Adobe interactive forms in webdynpro abap

hi
what is the purpose of templatesource(form and interface)?why we need to create a form and assign it to interface .purpose of interface .what the action it is going to perform in adobe forms

Hi ,
The interface helps to take the data to-and-from the Adobe form.
Thanks and Regards,
Prabhakar.

ABAP Webdynpro ADOBE interactive form

Hi All,
I have a problem when reading attachments from online adobe interactive form in Webdynpro ABAP.
I have tried two options:
Option1:
Get FP reference.
l_fp = cl_fp=>get_reference( ).
try.
Create PDF Object.
l_pdfobj = l_fp->create_pdf_object( connection = 'ADS' ).
Set document.
l_pdfobj->set_document( pdfdata = lv_pdf ).
Set task to get attachments.
l_pdfobj->set_task_getattachments( ).
Execute, call ADS.
l_pdfobj->execute( ).
Get result.
l_attachments = l_pdfobj->get_attachments( ).
CATCH cx_fp_runtime_system INTO exc.
xslt_message = exc->get_text( ).
ENDTRY.
option 2: in wdomodify method
DATA l_ifba TYPE REF TO cl_wd_interactive_form.
l_ifba ?= view->get_element( 'IF_001' ).
DATA l_form_method_handler TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
l_form_method_handler ?= l_ifba->_method_handler.
DATA l_attachments TYPE tfpattachments.
l_attachments = l_form_method_handler->get_attachments( ).
Both options are not getting the attachments.
Our SAP Netweaver version is 7 and ehp 4, ADS configured.
If i save the pdf with attachments locally and then use the UI upload and read the attachments it works. But not when the interactive form is online and when i add attachments to it and click submit(where submit code is the option 1 code), it is not finding any attachments. I wonder whether pdfsource context stores the attachments or not.
When i check the note, SAP say that attachments are supported from ehp2.
What is that i am missing? Any direction would be good.
In worst case i will do webdynpro screens for attachments maintenance, wanted to check with all experts before taking this option.
Please someone answer.
Thanks
Anu

>When i check the note, SAP say that attachments are supported from ehp2.
That is correct. Attachments are supported as of NetWeaver 7.0 Enhancement Package 2.
>Our SAP Netweaver version is 7 and ehp 4, ADS configured.
Not possible. NetWeaver 7.0 Enhancement Package 4 doesn't even exist yet. In fact 7.0 Enhancement Package 2 won't start ramp-up until December 20th. I think you are confusing your ERP Enhancement Package level with your NetWeaver Enhancement Package level. I'm guessing that it is much more likely that you are on ERP 6.0 Enhancement Package 4. This level of ERP actually runs on NetWeaver 7.0 Enhancement Package 1.

Control not going from Adobe Interactive form to ABAP WD Event handler

Hi
I am facing an issue with adobe interactive forms and WD ABAP integration.
The buttons in adobe interactive form when clicked is going round and round and the control is not going to the ABAP code(WD ABAP event handler code whatsoever). I have also set the debugger but the control is not moving to the ABAP code from the adobe interactive form.
Can anyone help me what can be the issue here and how can I resolve the same?
Thanks.
Sid

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

Adobe Interactive Forms with ABAP

Dear Fellows,
I need to know if I can develop an Adobe Interactive Form through the ABAP Workbench and Form Builder. ´Til now, I only found information about Print Forms with ABAP.
Thank You very much for Your help.
Regards.
SS.

Hi,
What version are you on? Pl take a look at the following <a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20in">link</a>
http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq
Regards,
Suresh Datti
Message was edited by: Suresh Datti

Creating Adobe Interactive Forms in ABAP Web Dynpro

Hi,
I am a begineer to ABAP PDF Form development. Anyone could help me to develop Adobe interactive forms (online and offline cases) using ABAP WebDynpro. I would need Thanks.step by step procedures to develop quickly. I have found the material mostly related to Java. Please suggest some links related to ABAP WebDynpro. What aee the methods that would be called to update a form, open a form and upload/download a form.
Regards,
Namita Bhan

http://www.sdn.sap.com/irj/scn/interactiveforms-elearning
the above link helps you out witht he best e learning sessions
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/solution_in_detail_interactive_forms.pdf
this also is a very helpful document
If you have any specific queries please feel free to shoot
Cheers
Senon

Filling dynamic drop down in adobe interactive form( webdynpro ABAP)

HI all,
Im new in Webdynpro ABAP, my requirement is to fill drop down list in adobe interactive form. i created adobe form and its working fine.
I Created context like ROOT(cardinality 1:1)->DATANODE cardinality 0:n. This context is for drop down and in wddoinit i did like this.
IN WDDOINIT ,
DATA lo_nd_root TYPE REF TO if_wd_context_node.
DATA lo_nd_datanode TYPE REF TO if_wd_context_node.
DATA lo_el_datanode TYPE REF TO if_wd_context_element.
DATA ls_datanode TYPE wd_this->elements_datanode.
navigate from <CONTEXT> to <ROOT> via lead selection
lo_nd_root = wd_context->get_child_node( name = wd_this->wdctx_root ).
navigate from <ROOT> to <DATANODE> via lead selection
lo_nd_datanode = lo_nd_root->get_child_node( name = wd_this->wdctx_datanode ).
get element via lead selection
lo_el_datanode = lo_nd_datanode->get_element( ).
ls_datanode[] = lt_dna_value[].
CALL METHOD lo_nd_datanode->bind_table
EXPORTING
    new_items            = ls_datanode
    set_initial_elements = ABAP_TRUE.
   index                =
while executing i'm getting this error ": WebDynpro Exception: ADS: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200,101). " . can u please tell me how to bind value for drop down.
I created sample table in same form and i binded same value to table, that time its executing fine.
can u please tell me solution for this Scenario.
Thanks
Hemachandran.
Edited by: hemachandran R on Sep 12, 2008 2:27 PM

hi,
My requirement, is to use dynamic drop down in dynamic table. I am using webdynpro abap.
i populated the value in drop down.
Its working fine but the problem is how to fill the default value in drop down. because i want to bind the default value which im getting specify value from the table.because each row
im getting different values, like first row
CAR
, that CAR want to fill as a default value in drop down and second row as
BIKE
that BIKE want to fill as default value in drop down ( example drop down contain   car , bike , cycle).
In adobe form i binded like this
$record.DATANODE.DATA[*].DNA_RATING
i dont know whether this one is correct or wrong .
im getting default value as empty.
please give me some solution how to do this.its very urgent
thanks
hemachandran.

Migrating PCR frontend-JSP forms to Adobe interactive forms-WD Abap Comp

Hi All,
We are currently on Netweaver 7.0 & ECC 6.0 and ESS - MSS Business Package 50.4. We are using JSP Forms on portal front for Personnel Change Requests (PCR's ) where in all the scenarios in the backend are heavily customized with good amount of usage of Javascripts. For certain scenarios, where in a huge amount of information is fetched from ECC 6.0 backend system, JSP are performing really bad and the total time taken to display the form is actually causing a lot of irritation to the end user.
We are planning to propose an upgrade to SAP adobe interactive forms. The prerequisite is that the business wants to reuse all the customized scenarios without any changes and just want to move towards better front end forms.
My questions are:
1. Please list benefits of SAP Adobe interactive forms - ABAP component over JSP forms (performance wise)
2. Issues with SAP Adobe Interactive forms?
3. Since Javascripts do not work in Webdynpro ABAP. How can we implement those front end checks and validations.
3. Any other options available for UI that can be suggested?
All suggestions are welcome. Quick response is appreciated.
Thanks a lot for your time and help.
Best Regards,
Anupama

Is your performance issue with the Javascript with JSP pages? or the Java script you are using within the Adobe form in your WDJ custom application using Adobe form? I have worked on PCR's using ISR framework old school it used to call as PCR and now HCM Processes and form, Developed PCR's using WDJ also integrated workflow with the WDJ PCR for approval(we never had any performance issue) infact ISR frame work was kind of slow compare to custom WDJ solution and less flexible for a developer to develop.
I have also worked created WDA custom application for PCR's , WDA is definitely better when you compare it with WDJ but I have not seen much performance issue with WDJ atleast on custom PCR solutions.
I don't have any case study to share with you, can you please tell what kind of PCR's your client is using and what kind of performance issue you are experiencing and where and why you guys are using Javascript.

Adobe Interactive Form in Web Dynpro ABAP

Hi all.
I want to create an web dynpro application in ABAP using an Adobe Interactive Form. Can anybody share the document regarding this or any articles.
Thanks & Regards
Sagar Ingalwar

Hi,
it is so simple..
1) Create AdobeInteractiveForm UI element in your screen.
2) Create pdf_source for pdf source attribute to bind it should be byte data.
3) Create node for data Source. (The data which you want to place on the pdf form)
4) right click on interactive form UI element & edit
5) PDF editor will be open.
6) drag the required data fields from data source to the form.
7) place submit button on the form.
Finally there are two kinds of interactive modes
1) native mode (it runs on firefox browser)
2) active X mode (it runs on Internet Explorer 6)
Please use appropriate submit button on the form (i.e. native/ActiveX submit button)
Best Regards
Ravi

Search Help on Adobe Interactive Form with Web Dynpro ABAP

Hi All,
I have created Adobe Interactive Form with ZCI type and XML based interface type using Webdynpro ABAP.
I placed a text field USER_NAME on the form ( data element is linked to search help USER_COMP ).
Added Native WD UI element 'Value Help' to form to search for users and changed script
*var fieldName = "INSERT_NAME_HERE*"; to var fieldName = "USER_NAME";
The problem is that when I click on the value help button, nothing happens.
Is any more additional steps required ?
Thanks
Karu

Hello
Check this
F4 Value Help on Adobe Interactive Form with Web Dynpro ABAP
Thanks
Anirudh

Urg : adobe interactive form creation using Web dynpro with ABAP

<i>Hi Floks,
Thank you For Your support and view my Quires.
I need helpful answer Regarding this Question . I need to Create custom ADobe interactive Form with WEB dynpro ABAP .Could please help out and give me what are the step can i followed here (Ex) .
Good rewards for best Answers.
Thank You,
Suresh Duvvuri</i>

please check this link:-
step by step it is explained
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3
All the best,
Mahesh.gattu

Adobe interactive form in wd abap

Similar Messages

Maybe you are looking for