Urg : adobe interactive form creation using Web dynpro with ABAP

Hi Floks,
Thank you For Your support and view my Quires.
I need helpful answer Regarding this Question . I need to Create custom ADobe interactive Form with WEB dynpro ABAP .Could please help out and give me what are the step can i followed here (Ex) .
Good rewards for best Answers.
Thank You,
Suresh Duvvuri

please check this link:-
step by step it is explained
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/c766e918-0b01-0010-99b1-c2b78cd059b3
All the best,
Mahesh.gattu

Similar Messages

Adobe Interactive Forms by using Web Service

Hi Experts,
Can we create adobe forms by using web service????...
Please give me the steps to achieve this.
Please help me out on this.
Thanks in Advance,
Praveen

Hi Praveen Kumar ,
Check the following websites which contain examples on Adobe Interactive Forms by using Web Service:
https://www.sdn.sap.com/irj/sdn/adobe
Improving the Performance of Adobe® LiveCycleu2122 Designer Forms(scripting)
http://www.adobe.com/devnet/livecycle/articles/lc_designer_perf_guidelines.pdf
Interactive Forms Based on Adobe Software: Overview
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e635e290-0201-0010-a9be-9e8e4ce04770
Adobe Interactive Forms
http://www.saplounge.be/Files/media/pdf/Huberland-Interactive-Forms-2007.10.10.pdf
Taking interactive forms to next level
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8c103c36-0301-0010-cda8-f6b381bedb6e
Introduction to Adobe PDF Library SDK(PDFL SDK)(Simply scroll the document)
http://partners.adobe.com/public/developer/en/webseminars/PDFL_WebSeminar.pdf
Creating Interactive forms in webdynpro for java
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f27e290-0201-0010-ff82-c21557572da1
PDF-Based Print Forms/SAP Interactive Forms by Adobe
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/frameset.htm
Date Objects in Adobe Designer
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
Checking and Testing a PDF-Based Print Form
http://help.sap.com/saphelp_nw04s/helpdata/en/c2/1fe9aa4d7b413e8515f90b73729e97/frameset.htm
Architecture
http://help.sap.com/saphelp_nw04/helpdata/en/f2/21021b911f4c0cae11459a4ce0bc62/frameset.htm
http://www.nl4b.com/Adobe/Invitation_SAPBrussels_Q407.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Are ZCI interactive forms available via Web Dynpro for ABAP?

Note 955795 talks about ZCI forms available via Web Dynpro for Java. Is this kind of forms also available via Web Dynpro for ABAP?.
Do ZCI interactive forms work via Web Dynpro for ABAP without the need of ACF?
If available, which support package levels are required?
Regards

Hi Mahamed,
I got your problem. You have not done anything wrong.
It is WebAS version which is not supported for this functionality.
But there is solution to this problem
Please refer to the SAP Note number - 1055738.
I think you will get the answer and the scenario described there will match your requirement.
This is a know issues with WebDypro ABAP but this works fine for Java Web Dynpro.
I have also tried for 2 months but finally came to know about it.
Regards
Satya

How to create table in interactive form via Java Web Dynpro

Hi,
How to create table in interactive form via Java Web Dynpro ?
Any online tutorial / example ?
Thank you.
Regards,
Eric

Hi Eric,
Just choose the UI element Table from Form Library and drag and drop it on the form. now choose the no. of rows and columns and other settings you want about table from the wizard initiated through this process. This all is what you have to do to create the table. Now to bind it to the fields of the data source bind the individual colums to individual attributes of the node in the datasource.
Hope it will solve your query.
Regards,
Vaibhav Tiwari.

PdfSource content of interactive form in Java Web Dynpro

Hi All,
I am using Java web dynpro with interactive form. When I display the contents of the pdfSource of the interactive form into a text file, I see the following which is not a true binary content. Could u please let me know why the content is represented in the form other than binary?
%PDF-1.6
%âãÏÓ
153 0 obj<</First 973/Length 1717/Filter/FlateDecode/N 120/Type/ObjStm>>stream
xÚ´XÉ 7 ý C"î ` p¼ lÇÉ) ¶DË%õ Õxþ>¯¤ä´/9±EV½*¾zÜd gyÍ Â0Á0
0000000153 65535 f
0000000154 65535 f
trailer
<</Size 156/Root 1 0 R>>
xref
0 0
trailer
<</Size 156/Prev 32208/XRefStm 2120/Root 1 0 R/Info 3 0 R/ID[<991012CC1DD111B20A00FFBFDB48FD64><991077C51DD111B20A00060100000680>]>>
startxref
35372
%%EOF
Thanks & Regards,
Jyoti

Hi Naidu
I have written the contents of the pdfsource to a file in the server using the below code:
byte b[] = wdContext.currentContextElement().getPdfSource();
File file = new File("C:
Severance.pdf");
long length = file.length();
FileOutputStream os;
try {
 os = new FileOutputStream(file);
 os.write(b);
 os.close();
catch (Exception e)
 // TODO Auto-generated catch block
 wdThis.wdGetAPI().getComponent().getMessageManager().reportSuccess("Some Exception "+e);
 e.printStackTrace();
And i have added a File Download element in the Application and have implemented the below piece of code for it:
IWDAttributeInfo attInfo = wdContext.currentContextElement().node().getNodeInfo().getAttribute("ctx_downloadpdfsrc");
ISimpleTypeModifiable type = attInfo.getModifiableSimpleType();
IWDModifiableBinaryType binaryType = (IWDModifiableBinaryType) type;
binaryType.setMimeType(WDWebResourceType.TXT);
String fileName ="C:
Severance.pdf";
// path to the source file
/* converts the binary file to a byte array and moves it to the text element */
try
 File file = new File(fileName);
 FileInputStream in = new FileInputStream(file);
 ByteArrayOutputStream out = new ByteArrayOutputStream();
 int length;
 byte[] part = new byte [10 * 1024];
 while ((length = in.read(part)) != -1)
 out.write(part, 0, length);
 in.close();
 wdContext.currentContextElement().setCtx_downloadpdfsrc(out.toByteArray());
catch(Exception e)
 wdComponentAPI.getMessageManager().reportSuccess(" !!!!!!!!!!!!! "+e);
 throw new WDRuntimeException(e);
Other than this, if we simply write this line in the code it will display the entire content of the pdfSource on the screen when deployed:
wdComponentAPI.getMessageManager().reportSuccess(wdContext.currentContextElement().getPdfSource().toString());
Regards,
Jyoti

Adobe Interactive Form call XI Web Service

Hi,
it 's possible to call a XI Web Service from an Adobe Interactive Form? if yes, how can I do it?
Thanks,

Hi,
http://my.execpc.com/~gopalan/dotnet/webservices/webservice_csharp_client.html
http://staff.washington.edu/fox/notes/ws_client_cs.shtml

How to debug Adobe form attached to Web Dynpro for ABAP

Hi,
My developer has created an adobe form and rendered inside a Web Dynpro page in the SAP Portal. It communicates with the Web Dynpro framework in the backend SAP system (Web Dynpro for ABAP).
My question is, how would I know what infotype access this form requires, in the form of backend authorization role? Is there any way (not trace, ST01) to debug Abobe form on Portal or in backend SAP system?
Thanks,
Karan.

Julius Bussche wrote:
> I am not sure whether this will work in this case, but principally if your trace is recording a * value for a field in an authorization check, then it must be defined somewhere, and there is an option in the trace file to jump from the check to the source code location where it occurred.
Yes, that's possible since the trace also records the information on the ABAP source code location where the AUTHORITY-CHECK statement (or other ABAP statements which internally trigger authorization checks) is executed. If I'm not wrong then there is a button (in ST05) which allows a direct source code navigation. Alternatively you might just click on the ABAP source code information displayed in the ST05 trace results (for recorded authorization checks).
Cheers, Wolfgang

How to use web service with ABAP Web Dynpro

Hi.
do you know, how to web service with ABAP Web Dynpro?

Hi,
If you have a webservice ready with you then you can generate a proxy from SE80 and you can use that. You just have to create a port and assign to that generated proxy(CLASS) and you are good to go.
Let me know if you need more information.
Thank You,
Gajendra.

Java Web dynpro with ABAP Clients?

Morning,
We have a situation where we would like to use a Java Web dynpro with multiple ABAP backend data sources. This is for autorization as well as data. We are not using Enterprise Portal.
We've created a pair of system Jcos and mapped them to the Web dynpro via the URL. This works and the correct data from the correct Client is retrieved depending on which pair of Jcos we define in the URL.
The problem we are having is that we are only able to logon using the ABAP Client defined in the ume....master.client parameter.
Is there a way to achieve this (again without EP) either in the system configuration or programatically in the web dynpro?
tia
Cheers,
Mitch

Hello,
Thanks for the updates. Actually my query is we have a SCM 5.0 system which has a java stack in it. But now we are going to upgrade it to SCM 7.0. - Is SCM 7.0 has a java stack ?
If it doesn't have , can we upgrade SCM 5.0 to SCM 7.0 without Java Stack ? Is it posssible to upgrade without Java Stack or not ?
Is it possible that we can convert Java Stuff into ABAP web dyn pro ? If yes , how shall we can achieve it ? If not, how shall we proceed in an alternate way ?
Thanks for your help in advance.
Madhu

Why not "Web Dynpro *with* ABAP"?

As a newbie I found "Web Dynpro for ABAP" to be confusing. Any ideas why its worded that way? Just curious.

Hi,
because it's a programming model created for abap programming.
If you look at the true content of webdynpro you come out at:
declarative programming of all the navigation, ui, datadisplay and gathering, without
writing the code, but letting the code to be generated.
so it's a concept build for abap,
not with abap (although the classes and interfaces are)
grtz,
Koen

Modify SAP data using Web Dynpro for ABAP

Experts,
I have a question. We all have working in web Dynpro to create report.
I was trying to display the data in table and update the data.
When I click on Save button the data should be saved in the SAP table.
SAP table may be standard or user-defined table.
Any idea of how to do it???
Answers will b rewarded.
Thanks in Advance
Edited by: Router on Mar 11, 2008 12:06 PM

Hi,
The solution to this is very similar to the reports that we write.
1. Create a context node from the dictionary element in the view of the webdynpro component.
2. Now you may be displaying/editing this data in the form of a table in the view layout. For this create a table in the layout and bind the fields of the context to the node you created from the dictionary table in the context.
3. In the layout you also want to have a button SAVE. on the event of this button. Write the code from code wizard where in
a. Read the context of the dictionary table from the context.
b. call method
CALL METHOD lo_nd_group->get_elements
RECEIVING
set = lt_ddictable.
c. update the database table using the internal table lt_ddictable.
Hope you find this helpul.
Regards,
Kinshuk

Dynamic DropDowns using Web Dynpro for ABAP

Hi,
I'm creating my first Web Dynpro for my new client.
The requirement is this:
There are three fields to be displayed on a screen - FieldA, FieldB, FieldC.
All three should appear as DropDowns on the screen.
FieldA determines the possible value list of FieldB.
Once Field B is selected, FieldA and FieldB determines the possible value list of FieldC.
Each of the fields have their own "master" and text tables. (eg: like T005 and T005T).
There is also a "matrix" table that contains all three fields (as Primary Keys). Note: There is also a "Disabled flag" field.
So basically we have 3 tables containing the master records.
We use these values to build a matrix of combinations:
FieldA   FieldB   FieldC   Disabled
A111     B111     C111     ' '
A111     B111     C222     ' '
A111     B111     C333     'X'
A222     B111     C111     ' '
A222     B111     C333     ' '
A222     B222     C111     ' '
Now, we want to display the three fields on a Web Dynpro View.
I've created View Context as follows:
CONTEXT
+-- Header_Data (node)
      +-- FIELDA_NODE (node)
          +-- FIELDA_CODE (attribute)
          +-- FIELDA_TEXT (attribute)
FIELDA_NODE is based on the Disctionary Structore of FieldA's text table (which contains, the LANGU field, and the FieldA Code and Text fields)
Cardinality and Selection are both 0..1
FIELDA_CODE (attribute) has Input Value Mode of "Automatic". When I chose this, SAP derived the Type of Input Help as "Search Help" and Determined Input Help as "ZFIELDA_SH" (which I created using the "master" and text tables).
(Note: FIELDB and FIELDC are defined the same way).
I then created the Layout:
For FEILDA_CODE, I created a DropDownByKey (using the context menu item "Create Container Form"). So now, FIELDA_CODE's property selectedKey is "...HEADER_DATA.FIELDA_NODE.FIELDA_CODE" (as per above View Context).
Now when I run the Web Dynpro Application, I get the error:
Context Path HEADER_DATA.FIELDA_NODE.FIELDA_CODE Cannot Be Resolved (Last Node Is Empty) ?ꯀ ??
Can anybody help with this?
I have no idea why it's doing this. I assume I've missed a step or done something completely wrong!
I've tried DropDownByIndex for FIELDA_CODE, and got the error message:
The ASSERT condition was violated.
(Note: One way that does work is to create a Supply Function (node property) for the FIELDA_NODE. And create a DropDownByIndex for the FIELDA_TEXT field/attribute.)
But, I feel this should be un-necessary. Since I have the master and text tables, I have the Search Help, I should be able to create a DropDownByKey field - without need for any coding.
Also, once FieldA is working.
How can I restrict FieldB and FieldC (based on the matrix table above)?
I created an OnSelect event for FIELDA, but in the EventHandler module I wasn't sure
(1) what was the easiest way to get the selected value of FIELDA, and
(2) how to the restrict the possible values of FIELDB.
Any help would of great value!
Thank you in advance.
Rajendra
PS: Sorry for the long winded explanation, but it's the only way to describe what I've done so far.

Hi Rajendra,
In order to use a DropDownByIndex the needs to be set to multiple. Currently, the node is 0..1. Please set it to 0..N and it should work.
The reason why the DropDownByKey does not work is that the node has no element. Using 0..1 means that initially no element is present. You need to supply one.
In summary, a better design would be to decouple the places where the dropdownbykey and dropdownbyindex get their data from or to use two dropdownbyindex with a master/detail relationship.
Best regards,
Thomas

Adobe Interactive forms & WebDynpro for java problem with IE7 and IE8

I have Interactive form ui-element in WebDynpro for java (ver. 7 SP 10) application. It works fine with IE6, but in IE7 (or IE8) it doesn't show that ui-element at all. We have tried to change IE7 security & advanced settings, but we have not made any progress. We have also tried to install/uninstall different Adobe reader versions etc.

I know a little more about the problem now. After viewing the XML source I change the property of the inputfield.
It was like this:
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="ReadOnly">
but i changed the access to be nonInteractive
<field name="verdipers_felt" y="130.7001mm" x="180.1801mm" w="101.6004mm" h="44.4501mm" locale="no_NO" access="nonInteractive">
now view2 shows the linebreak as in view1... Buut! when im going back to view1 from view2, the linebreaks gets converted into spaces
thats pretty wierd, aint it?

Accessing a R/3 Workflow workitem directly using Web Dynpro Java/ABAP

Hi,
I have a requirement for which I am not sure what will be the correct forum to post. But I guess it involves Portal / Web Dynpro so I started from here.
You can guide me to correct path as we move forward.
Current Scenario:-
There is a work-flow prepared in SAP R/3 system which triggers a mail to user with a link to Portal UWL. In UWL, user may select the task and click on it to execute.
Scenario to be developed:-
Instead of link in email to UWL, link should directly navigate to work-item in Work-flow.
Any idea how this can be done?
Thanks and regards,
Amey Mogare

I could make use of a standard SAP Transaction iView.
Location in portal catalogue:-
Content Provided by sap --> End User Content --> Standard Portal Users --> iviews --> com.sap.nw.bc.uwl.iviews --> uwl launch sap transaction
Here is the example:-
http://<ServerHostPort>/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fevery_user!2fgeneral!2fiViews!2fcom.sap.netweaver.bc.uwl.iviews!2fcom.sap.netweaver.bc.uwl.uwlSapLaunch?System=<system>&TCode=SWNWIEX&AutoStart=true&DynamicParameter=p_action%3DEXECUTE%26p_wi_id%3D<workitemID>

Sales Order Creation Using Web Dynpro java

hi
i am new to webdynpro java.
Can anybody provide me the solution for creating sales order using bapi's .if possible with code snippets
if possible pls provide me some links for this.
Regards
kiran

Hi Kiran,
These are the mandatory fields to create sales order. While Service Context Mapping you select these fields and bind these attributes to input fields.
Order_header_in
Doc_type
Sales_org
Distr_chan
Division
Incoterms1
Pmnttrms
Order_items_in
Material
Plant
Target_qty
Target_qu
Gross_wght
Net_weight
Untof_wght
Ship_point
Order_partners
partn_role
Partn_numb
Order_schedules_in
Itm_number
Sched_line
Req_Date
Req_qty
Regards,
Sunaina Reddy T

Urg : adobe interactive form creation using Web dynpro with ABAP

Similar Messages

Maybe you are looking for