Adobe Interactive Form text field not editable

Hello,
I created an Adobe Form using transaction SFP and placed a textfield on the body page.
I then created a Web Dynpro application using SE80, placed Interactive Form container on the view. I also checked the flag 'Enabled' and provided the templateSource as my Adobe Form name.
When I test the WD application, the text field is not editable.
Can you please advise what needs to be done?
Thanks
Sagar

Hi...
Place the following code in domodifyview
data:
lr_interactive_form type ref to cl_wd_interactive_form,
lr_method_handler type ref to if_wd_iactive_form_method_hndl.
check first_time = abap_true.
lr_interactive_form ?= view->get_element( 'INTERACTIVE_FORM' ).
lr_method_handler ?= lr_interactive_form->_method_handler.
lr_method_handler->set_legacy_editing_enabled( abap_true ).
Thanks
Gopal.

Similar Messages

ADOBE Interactive Form in webdynpro not allowing to enter value

Hi,
I have developed a Adobe interactive form in SFP and then i developed webdynpro component , then integrated into webdynpro. while running the webdynpro application which is showing the adobeform but the input fields are not allowed to enter value.
The same adobe form can be allowed to enter values while running from the report. i dunno how to set the value of the importing parameter fillable = 'X' in webdynpro.
regards,
Roops

Hi friends,
The above mentioned setting are all active like Zc...Layout, enabled check box etc.. but when i make it to Activex which is not displaying form in the portal while running the application instead it shows red color X mark.. is there any setting required to run adobe with webdynpro ..
1.) any notes or patches ???
2.) is activex mandatory for running interactive form in webdunpro? if yes what are system setting required....
Regards,
Roops.

How to display Adobe Interactive Form from ABAP (not WDABAP)

I have created a WD ABAP application that creates an Adobe Interactive Form (ZCI) and submits it for workflow. All of the data on the form is saved in custom itables in the SAP System. The end-users are supposed to save a copy of the form at the last step in the workflow before they "Acknowledge" the task in UWL. Once the acknowledge takes place, they can no longer display the form in UWL. They want an ABAP program that will read the data from the various custom tables and display a "print" version of the form (not interactive).
I am calling FM 'FP_FUNCTION_MODULE_NAME' to get the function module for the form. I then call FM 'FP_JOB_OPEN' with the parameter IE_OUTPUTPARAMS-REQNEW set to ABAP_TRUE. The call to the form FM has the following EXPORTING parameters:
    EXPORTING
    /1BCDWB/DOCPARAMS   =
      /1BCDWB/DOCXML         =
I understand the /1BCDWB/DOCPARAMS but have no idea what needs to be done to for the /1BCDWB/DOCXML parameter. Can anyone offer any advice or assistance?

Joyce,
this is really simple - the reason you have that /1BCDWB/DOCXML is because you defined your form interface to have an XML based interface.
While this is great for ABAP Web Dynpro, because the XML is generated for you, this is NOT the case with regular ABAP.
You should choose ABAP Data Dictionary-Based Interface. You will then be able to add tables, structures and fields to your interface.
For instance, here's code from a program where I call the form in regular ABAP
data: ls_worksheet TYPE Zxxx_structure.
* Fill the ls_worksheet structure here.
* Call the generated function module
CALL FUNCTION ls_function
    EXPORTING
      /1bcdwb/docparams = fp_docparams
      worksheet          = ls_worksheet
    IMPORTING
      /1bcdwb/formoutput = ls_form_output
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
Notice I do not have the /1BCDWB/DOCXML Exporting parameter.
Just change your interface to a Data Dictionary Based, and add the tables/structures/fields to it.
then, go to your calling program, fill them, and pass the data through the Exporting parameter.

Adobe form - Text field not getting saved.

Hi All,
We created an application in which user will enter the data and submit it . The details entered in the screen will be saved in the Ztable.
Our problem is when the user enters the data in the TextField UI of the adobe form it is not getting saved in the table. In development its working fine.
In production for few users it is getting saved and for few users it is not getting saved.
We are not able to find out the root cause of the problem.
Any help will be appreciated
Best Wishes
Idhaya R

Hi Idhaya,
As you said it is working for few users,
Then you need to check Adobe reader installed for users who are having problem.
Hope it helps.
Regards,
Arun

Adobe edge generated text is not editable with dreamweaver or notepad ++ is there a work around?

How can I enable a client to update there text regularly via code editor on their server (not wysiwyg)? Want to be able to update text that was originally generated within Adobe Edge.
Edge appears to convert the text to some kind of symbol, as when the text is changed in notepad++ the actual text content does not change on the finished file, and only the original text is viewable on the browser.
Is there some way to do this?
With flash it was easy to edit a .txt file via text field var - is there something similar with Edge?
been trying to work this out for several months now.
any working examples would be appreciated.
thanks

Hi alayna,
Here's a link to the example file:
https://creative.adobe.com/share/dcbe9fc1-845b-476a-838a-8379f556872e
It's pretty straightforward - it's a .js file containing only variables that gets saved in the same directory as the Edge Animate HTML file:
Then add a script tag to the HTML file generated by EA pointing to the path of the .js file:
Finally, add a handler to the Stage creationComplete event, which sets each text field to a separate variable:
That's all there is to it!
hth,
Joe

Loadrunner 11 and Adobe interactive forms

I'm currently on-site for SAP Italy and the client wants to use Loadrunner 11 to test a business process that requires Adobe interactive forms.
eCATT is not acceptable to the client
Can you advise me if the question about this being possible using Loadrunner 11 has been answered ? Has anyone actually done this using LR and if so would you share details ?
I note that in the HP Forum that this topic is currently live.
jc

Hello Brenda,
yes, we've tested eCATT with interactive forms. It works so far, but the question is what is the goal of your test?
Using eCATT ADS, the application, and the business logic behind is tested. If that is your goal, using eCATT is an appropriate solution.
Regarding Loadrunner-Tests I'm not the expert. But within the solution an ActiveX does posts to the server using encoded URLs. So there are several problems:
- is loadrunner able to record those posts?
- is loadrunner able to modify URL parameters dependend on the current session?
- is loadrunner able to use the response of such a post and dynamically adapt a post parameter of the subsequent post?
So I think it is at least very difficult and complex to use loadrunner. I recommend eCATT as the solution for automated tests of InteractiveForms.
Regards
Stefan

Adobe interactive form with ABAP workbench

Hi Experts,
Need to know, can we run Online Adobe interactive form using ABAP ( Not webdynpro ABAP or Java) workbench? If so how? and if possible please provide the driver program which run the form & after filling it, it updates SAP data online.
Regards,
Nik

That is possible by using FLM tool. You need to buy it separately. Its an ARCH product. Or if its HR forms then you can use HCM proceess & forms.

Adobe Interactive forms are not editable following an EHP6 upgrade, how do we correct this?

Good day,
We are currently going through an upgrade to EHP6. We have set up a test parallel environment that was copied from prod and applied EHP6 for a compare.
During our initial tests, we have found that Adobe interactive forms are not loading properly following the upgrade. 11 out of the 13 interactive forms currently implemented in the portal are no longer editable. When you go to select a value from the drop-downs or input a value in the field the fields remain blank. This is a high priority as all users perform their PA actions via MSS and through workflow approvals using Abode interactive forms.
Does anyone have any ideas of how to fix this issue or have come across this issue before?
Thanks in advance,
Christine

Hi Christine,
maybe a restart of the ADS-Server helps you out. I can remember a similar case where the restart helped.
IF not, check if you got the latest patch of the ADS, maybe the upgrade of the erp causes this error, because it pass now more data to the ads than before.
IT's just a suggest. Let us know, if that helped you out.
Regards
Florian

Adobe Interactive Form Not Editable

Hi,
I have created Adobe Interactive Form using Web Dynpro Java Application.When i run the application i get the pop up message [The document enabled extented features in Adobe Reader.The document has been changed since it was created and use of extended features is no longer available.please contact the author for the original version of this document.].When i click for the pop up message the form is not interactive.If there is Adobe Life Cycle Designer and Adobe Reader version problem for this.Let me know if any one facing the same issue.
Regards,
SatheshKumar R

Hi Satheesh,
1. Check the Adobe form Version (from 7.1 to 8)
2. Installed Adobe form Extended Language Support Font Pack to Adobe ,if you are using some other language in Adobe form
3. Check the ADS Version.

Need help with calculated fields in Adobe Interactive Forms

Hi Gurus,
I have an Adobe Interactive form in which i have radio buttons. Upon selecting any of the radio buttons, value in text box should be changed( Calculqated filedS). How i can achieve this?
Regards,
Srini
Moderator message: wrong forum, please post again in Adobe Interactive Forms, but always try yourself before asking.
Edited by: Thomas Zloch on Jul 13, 2010 11:58 AM

Hi Tapan
No, it's working ,with one remark.
I've done a mistake, in the final formula. The logic remain the same! ;)
The calculation values for second column ( COL2 ) are 1,2,3 and not 0,1,2 as I wrote before and as for COL1 are so the formula is
=3*if(COL1="ABC",0,IF(COL1="DEF",1,2)+if(COL2="RST",1,IF(COL2="YYZ",2,3)
and not
=3*if(COL1="ABC",0,IF(COL1="DEF",1,2)+if(COL2="RST",0,IF(COL2="YYZ",1,2)
I created also a real example for you, with 2 dif calculation ways . First I created 2 calc_columns for COL1 and COL2 ( CALC_COL1+CALC_COL and after I added both these 2 column , and second way is to calculate directly) .
Check this image
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

Process data of none bound fields in Adobe Interactive Form (stack 13)

I use a Adobe interactive form (made in Designer 7.0)which is a combination of fields bound to Web Dynpro Context fields and fields which has no binding at all (in Designer: Default binding = Normal). The Adobe Document Services on the J2ee server is of stack 13.
When I save the Adobe Form (off-line scenario)from the Web Dynpro Application, only fields bounded to the Web Dynpro Context are saved in the Form on my local file system(no warning that data isn't saved).
When I open the Form for off-line editing, I can change bounded fields and none bounded fields. But when I save and re-open the form, the data in the none bounded fields is lost.
I used the same scenario in a stack 11 j2ee/portal system, but then all data (bounded or not) in the form was saved!
Could anyone explain the difference, but better tell me how to save both kind of fields in the off-line form (and bounding all fields is not a solution).
Thanks in advance,
Richard

Hi,
Check your ADS settings, I feel it's due to lack of some config in ADS only.
Regards
Raja Sekhar

Web Service is not triggering using Adobe Interactive Form

Hello Experts,
I know this is a common topic now , but the problem I am facing, no thread help me to solve that.
Problem:--
My requirement is to create an adobe form , in which
-> an input field is needed,and some description is needed.
I used button to trigger my webservice.
Here , I want to clear that , I have made a proper WEB SERVICE using Remote Enabled FM.
My web service is working fine as I have tested from WS NAVIGATOR(Note: http://<source>:<port>/wsnavigator).
In Adobe Form (SFP), I have made a new Data connection using WebService WSDL.
All Request and Response parameters are availabe in Data View palletes of Form.
Button that is available from data connection is used.
I have used Button as an Execute button , under execute tab in connection , I had given DATA CONNECTION name .
But above things not worked so ,
I also tried with Regular Button , and under click written Javascript/FormCalc which is:--
var cURL = 'http://x.y.com:8012/sap/bc/srt/rfc/sap/ZMATERIAL_DESCRIPTION?sap-client=800&wsdl=1.1';
var service = SOAP.connect(cURL);
xfa.connectionSet.DataConnection2.execute(0);
But this also not worked .
So, I think there can be a little issue may be , I am forgetting to click some special atrributes in form .
Please help me and let me know what can be probable reasons that webservice is not triggering
Thanks a lot ,
Jeet

Solved my self, converted PDF into image and used that pdf as a static image in Adobe Interactive Form.

Adobe Interactive Form is not working - Specify Stream Source

Hi Experts:
I am having an issue, where the system I am on is SAP ERP Central Component 5.0 (ECC5.0). There is no Layout Tab to define ZCI or xACF in transaction SFP. I'm not sure if this is relevant, except that, I cannot get my custom Interactive form to work.
All PDF tests in SAP are passing, but being on ECC5.0, I do not have the following programs (among many others):
FP_CHECK_DESTINATION_SERVICE
FP_CHECK_HTTP_DATA_TRANSFER
When I call my Adobe Interactive Form and set sfpdocparams-fillable = 'X' I get an error:
Error creating PDF Document -PDF Exception: Stream does not represent a PDF document.
I have applied the Usage Rights credential properly and my form displays read-only when sfpdocparams-fillable = BLANK. While in transaction SFP, I can see that my interactivity works when displaying the form through the Preview PDF tab.
Also, I know that my credential works because when I test form ISR_FORM_SPEG, I do have interactivity.
In parsing through the ADS log file of my custom AIF, I noticed the following:
 Parse template node
 Template:
 Source = Stream
 Name = TEMPLATE
But I believe it should be something like:
 Parse template node
 Template:
 Source = URL
 Name = dest:FP_ICF_DATA_<My_System_ID>//sap/bc/fp/form/layout/<My_Form_Name>.
Does anyone have any suggestions as to how I can change the source of my stream?
Thanks for your time experts,
Sean

Hi Sean
In the Visual Admin of the server that runs the ADS check under server->services->destinations click on http folder. There should be something under that called FP_ICF_DATA_<sid of backend>. If there is not then create one in there.
Regards
Thashin
Edited by: Thoshin Naicker on Jan 12, 2009 7:09 AM
Edited by: Thoshin Naicker on Jan 12, 2009 7:10 AM

Control not going from Adobe Interactive form to ABAP WD Event handler

Hi
I am facing an issue with adobe interactive forms and WD ABAP integration.
The buttons in adobe interactive form when clicked is going round and round and the control is not going to the ABAP code(WD ABAP event handler code whatsoever). I have also set the debugger but the control is not moving to the ABAP code from the adobe interactive form.
Can anyone help me what can be the issue here and how can I resolve the same?
Thanks.
Sid

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

Adobe interactive form(ABAP WD)size is increasing & not opening from EP UWL

Hello All,
Adobe interactive form (ABAP WD) size is increasing after cleansing data from MDM and the form is not opening from portal UWL.
Same application is working fine in Dev and Qa environment. In dev and QA the form size is around 150 KB after cleansing data from MDM. Some reason in production it is more than 2 MB. FYI - We have multiple app servers in production.
/Padmanaban

Hi Babi,
In the adobe form layout library Use the Submit(which internally means submit to SAP) button from the Webdynpro Native category.
Only this button action can connect adobe to web dynpro.
Whenever we click on this particular button the event will be trigger in the ONsubmit event of interactive form UI element in the webdynpro.There we can write our abap code.Hope this will help you.
Regards,
Simi A M
Edited by: amsimi on Mar 22, 2011 11:37 AM

Adobe Interactive Form text field not editable

Similar Messages

Maybe you are looking for