Adobe Media Encoder and Macromedia Flash MX 2004

I already posted this question here: http://forums.adobe.com/thread/777473?tstart=0
When I first posted I thought it had something to do with Premiere but now think it has something to do with the Adobe Media Encoder.
If you want to delete that message then feel free.
I'm using Adobe Premiere Pro 2.0 and have recently installed Macromedia Flash MX 2004.
Now when I go to export to Flash I don't get the Adobe Premiere's Flash Export dialog box when I press "Options" from the Export Settings.  I get the Flash MX Professional 2004 "Flash Video (FLV) Exporter."  It doesn't allow me to change any of the parameters.
I then un-installed Macromedia Flash MX 2004 but still get the same "Flash Video (FLV) Exporter."
Any ideas on how to get the Premiere exporter back?
I uninstalled all macromedia programs, Dreamweaver, Extention Manger, and FreeHand.
I now I get this message when selecting Macromedia Flash Video from the export settings:
"Cannot find Flash Video export Module for QuickTime. Please install and retry."
So I un-installed and re-installed QuickTime and got the same message:
"Cannot find Flash Video export Module for QuickTime. Please install and retry."
No quite sure if the above message was talking about reinstalling QuickTime or Premiere, so I uninstalled and reinstalled Premiere again, agian and got this message:
"Cannot find Flash Video export Module for QuickTime. Please install and retry."

Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
I then went in to the registry and removed all the Entries that had either of these in it:
C:\Program Files (x86)\Common Files\Adobe\DVA\COM
C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
and these as well
C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
Rebooted the computer, logged back in to Admin.
I then re-installed QuickTime, and rebooted.
I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
I'd be careful messy with the registry if you are trying to fix this type of problem.  Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry. 
I'm not sure what I'm going to do about that Flash Website I've working on...

Similar Messages

  • Adobe Premiere Pro 2 and Macromedia Flash MX 2004

    I'm using Adobe Premiere Pro 2.0 and have recently installed Macromedia Flash MX 2004.
    Now when I go to export to Flash I don't get the Adobe Premiere's Flash Export dialog box when I press "Options" from the Export Settings.  I get the Flash MX Professional 2004 "Flash Video (FLV) Exporter."  It doesn't allow me to change any of the parameters.
    I then un-installed Macromedia Flash MX 2004 but still get the same "Flash Video (FLV) Exporter."
    Any ideas on how to get the Premiere exporter back?

    Well there is no answer to my question, but I did finally get the Adobe Media Encoder dialog box to come back again.
    After uninstalling Premiere and QuickTime, then shutting down the computer, rebooting and logging on to the Admin account, shutting down again, rebooting again, logging in to the Admin account again ...
    I then went in to the registry and removed all the Entries that had either of these in it:
    C:\Program Files (x86)\Common Files\Adobe\DVA\COM
    C:\Program Files (x86)\Common Files\Adobe\DVA\FLASH
    and these as well
    C:\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
    C?\Program Files (x86)\QuickTime\QTComponents\FLV.qtx
    Rebooted the computer, logged back in to Admin.
    I then re-installed QuickTime, and rebooted.
    I then installed Premiere and the Adobe Media Encoder Flash dialog now shows up.
    I'd be careful messy with the registry if you are trying to fix this type of problem.  Try uninstalling quicktime and premiere and do the above shutdown, reboot sequence a number of times before doing anything to the registry. 
    I'm not sure what I'm going to do about that Flash Website I've working on...

  • Since new update - Adobe Media Encoder and CUDA not working

    CUDA not launching - Premier CC says that only software will work. Media encoder crashes on launch. Re-installed both.
    Nvidia 670 GTX

    What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
    Premier Version 7.2.2 (33)
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
    Problem started after I installed the software updated
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    Windows 7 Ultimate - SP1
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
    REDCODE .r3d from R1 - RedCode 28
    If you are getting error message(s), what is the full text of the error message(s)?
    Adobe Media Encoder Has Crashed - please contact your system administrator. This graphics card is not supported, CUDA disabled.
    What were you doing when the problem occurred?
    Booting premier pro, opening a new project, when trying to render using the encoder
    Has this ever worked before?
    Yes worked fine before 7.2.2 update
    What other software are you running?
    Chrome, Media Player
    Do you have any third-party effects or codecs installed?
    RED Giant Universe is installed
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
    i7 3930k 12 Core, Nvidia 670 GTX 4GB, 32GB Corsair 1866 RAM, RAID HDD
    Are you using Mercury Playback Engine GPU Acceleration?
    YES - Nvidia 670GTX video card
    Does the problem only happen with your final output, with previews, or both?
    Problem Occurs when rendering the final output for the Medi Encoder and the GPU issue when I open a new project that used to use Mercury
    I also cannot seem to find the file within Premier Pro for "supported Cards" - I had this issue before and I just added my card to this list, this list seems to be missing.
    Thank you.

  • Adobe Media Encoder and CS6

    Is Adobe Media Encoder part of Premier Pro CS6?

    Yessir!
    CS6 Trial Downloads (Not Creative Cloud Subscription)
    http://forums.adobe.com/message/5649304#5649304
    Perpetual License version - no subscription necessary.
    Fully functional 30 day trial, after installation run: Help > Updates...
    If you already own a license for CS6, all of these trial downloads can be
    updated and authorized online by using your existing serial number(s).
    Perfect for backing up your boxed DVDs.
    CS6 - Buy the Perpetual License version
    (Not Creative Cloud rental)
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPMZ
    To buy an upgrade instead the of full version, click the buy button
    then select 'I want to buy: 'Upgrade' instead of 'Full'.
    CS5 and CS5.5 Products are eligible for upgrade to CS6.

  • Adobe Media Encoder and f4v files

    I have a bunch of f4v files that were created by FMLE 3.2 that I'd like to convert to a more usable format, but when trying to open them in Adobe Media Encoder CS5.5, I get an error that says:
    "The file <my file> could not be imported.  The source compression type is not supported."
    These are f4v files straight from FMLE, with h264 video and aac audio, and they play fine in VLC.  This is all running on Mac OS 10.8.
    What gives?  Can AME really not open f4v files from FMLE?

    Apparently not.

  • Adobe Media Encoder and .TS files

    After updating the Adobe Media Encoder to the 2014.1 Release, every time I try to encode (convert) a .ts file I get audio issues post render no matter what I render out to.  It's only an issue when encoding (converting) .ts files.  I can convert an .mpg, .mov, etc. and it comes out fine.  Before this release I could render out .ts files just fine and had no issues.  Can someone help me understand what changed and why I can't convert .ts files anymore without getting distorted audio after converting?  The sound renders out as a reverb effect kind of like the audio was cut in space.
    All help is appreciated.
    Thanks!

    Still not working for me.  Please help?  I use Adobe Media Encoder on a daily basis.

  • Adobe Media Encoder and Encore CS5 Vs. CS5.5

    Hii,
    I have a Tennis project that has both DSLR 720P (60) footage and HDV footage 1080 (60i) footage. I have tried  making a Bluy-ray disc in Encore 5.0 and it looks good. I tried encoding Blu-ray H.264 footage from PP CS5 and Importing this footage into Encore CS5 in a Blu-ray project. Then Transcoding to DVD format. The resulting Jaggies/Saw Tooth lines of the Tennis court are terrible looking. Looks good in Blu-ray format. I have made DVDs from straight HDV footage and those come out looking great. It is something to do with the combining the different footages.
    My questiuon is did Adobe redesign the Media encoder or Encore in version 5.5. If so I would upgrade just to fix this problem. If not is there any good external Transcoding program that I can try? I have tried just about every known setting/Encode type in Media Encoder but non do a good job.
    Thanks,
    John Gerard

    I think part of the problem is mixing 720p60 with 1080i60 for DVD production. Different steps have to be taken to change HD to SD when encoding to DVD. See: http://www.bellunevideo.com/tutdetail.php?tutid=10

  • Adobe Media Encoder and Timecode

    Does Media Encoder retain timecode?
    I'm doing 23.98 to 29.97 Quicktime trnascodes and the timecode always starts at 00:00:00 on the transcoded file.

    AME can, but It depends on the exporter used.
    Generally I've found the answer to be no.

  • Adobe Media Encoder and ImporterProcessServer

    Windows 7 64-bit, AVCHD 1920x1080i MTS source video
    Permiere -> Export Media and choose MPEG2-DVD, NTSC, 720x480 wide, 29.97 drop frame, upper, quality 5.0, VBR 2-pass, 7 Mbps
    When job starts in AME, ImporterProcessServer starts to grow in memory, just like when I was editing in Premiere.  The memory usage was about 1 GB.
    Once that's completed, AME enters "Encoding" phase, ImporterProcessServer memory usage immediately drops to about 100 MB and AME uses about 600 MB.  The encoding process becomes extremely slow.  1 hour vidoe used to take about 2 hours.  Now it shows 20 hours estimate.
    Am I missing some settings?
    Thanks!

    OK, I've found out myself.
    I can't use Premiere to create the AME job.  I must open AME and add Premiere project sequence.
    This might be a known problem but I have not seen it before.

  • Adobe Media Encoder and X264

    Is it possible to encode using the x264 codec instead of the mainconcept codec?'
    greg

    Are you using a PC or Mac? You can get x264 installed, but remember there are a few prerequisites and considerations:
    It needs to be 64-bit (unless it's a Quicktime implementation, as Todd mentioned, but those are only available for Mac as far as I can tell).
    It needs to be a VfW (Video for Windows) implementation; a command-line interface encoder isn't going to work.
    You will probably need to encode audio separately, and mux externally if you want to use an MP4 (or other) container.
    You can get a 64-bit VfW x264 encoder here; when installed, you need to select Microsoft AVI as the format (again, assuming you're talking about PC/Windows). This forces you to use an AVI container and uncompressed PCM audio, which is far from ideal. Also, it's a little weird trying to do multipass exports, which are automatic when you use any sort of 2-pass encoding from AME, but since x264 requires you to do one or more passes which write information into a stats file, you actually have to do the encode multiple times.
    That all said--I couldn't get a decent export out of Premiere using this encoder. It looked FAR better than the Mainconcept encoder, but it jumped and stuttered and displayed other weird anamolies on playback. I might do some more testing, but I'm not holding out much hope.
    Ultimately, you might be better off exporting an uncompressed or losslessly compressed intermediate (Lagarith, for example) and then using one of the many freely-available encoding tools that use x264 for H.264 encoding. I've used MeGUI in the past, with great results. It takes a little bit of squirreling around to get exactly what you need--for example, some knowledge of VirtualDub is required--but once you figure out the bells and whistles, it creates some amazing looking encodes. It definitely trumps the encoding available from AME, and I'm ready to go back to it from Sorenson Squeeze, which is big expensive crashy bloathog.
    In the end, there are no hard-and-fast rules to encoding for the web; much experiementation is required. Good luck!

  • Using Adobe Media Encoder with After Effects and ExtendScript

    Hi,
    I'm trying to automate the process of encoding a video using the Adobe Media Encoder. The project I'm working on includes allowing a user to upload a video and having that video then be encoded in different formats. I'm very new to After Effects and ExtendScript, but the two ways I see of doing this are:
    1) Use ExtendScript to fire the Adobe Media Encoder through After Effects, using the 'Add to Adobe Media Encoder Queue' function. I'm not sure if this is possible or not.
    2) Bypass After Effects all together and use the 'watch folder' function in Adobe Media Encoder and upload the files directly to that folder.
    I'd prefer to go route 1, if that's possible, but I'm not sure it is. I was thinking that I could write a script to work with Adobe Media Encoder to encode a given video, but from what I've read, ExtendScript isn't currently supported by Adobe Media Encoder? This is true? What would be the best way to go about accomplishing this?
    Thanks.

    I think you will have a much easier time just using option 2. I have to ask, why do you want the files to go through After Effects anyway? If you are just taking a file and converting it to ## different formats...the watch folder setup in AME would be super easy to setup.
    All you need to do is ensure the user submitted files end up in a certain directory -- make that folder your watch folder and create a second folder within that one called 'encoded' or something along those lines. That way as long as AME is online and watch folders are active....you won't have to do a thing.

  • Adobe Media Encoder FLV issue

    I am posting this question here because there is no Adobe Media Encoder forum - sorry! My question is about file sizes. I created some videos in Premiere CS4. I need to convert the videos to FLV formats (they are to be used in an e-learning module that requires FLV files). However, I'm having trouble with the file sizes. At the rate it's going, I will max out our server space in no time.
    To give an example, I have a 17 second video with an original frame size of around 720 x 480. When exported as a MOV file (high quality, etc.) it's about 66MB. I've tried creating the FLV straight from the Premiere project file, as well as separately, by running the MOV through Adobe Media Encoder and the results are just about the same. In either case, I can't get the file size anywhere below 1.8MB, which seems rather large for a web compressed 17 second video. The file size DOES NOT get smaller when rendering at the smaller frame size of about 300 x 220. Back when I used to use Sorenson Squeeze for web compression, changing the frame size like that would usually cut the video file size in half. Media Encoder leaves the file size the same...
    I hadn't worked with video in a little while, so Adobe Media Encoder is new to me... but I asked my husband about this. He's a web developer and deals with video a lot. He said that he would take a MOV file, drop it into Flash Video Encoder and use the preset for FLV and it works great - a video that's this long should only be about a few hundred k in size (it's not a complicated/lots of transition video). Apparently Adobe Media Encoder has replaced Flash Video Encoder, so I don't have the option of trying it the other way... has anyone else run into this, and if so, do you have any tips?
    Thanks so much!

    I'm having a similiar issue, my file orginally is only 10sec long and 13mb *.mpg file, the same as it was when I was converting in CS4, only back then, the convertion took maybe a minute and the output file size was about 1mb or smaller, and that was keeping the 640x480 size and removing audio.  Now with CS5, the estimated output size is anywhere from 2000-3000mb for starts, remove audio and scale back other settings and I can get it down to 70mb and takes a staggering 2.5hrs to complete...for a 10sec video.  I don't know what they changed between cs4 and 5 but they screwed up big time, this is a joke.  i'm on AME ver.  5.5.1.12(64-bit) if that makes any difference.  any idea or help would be greatly appreciated, I've got about 5 of these 10sec vids to convert a month and I need to get this fixed.

  • Best settings to export media to adobe media encoder

    Hi I am after some help
    what is the best settings to use to export footage to media encoder from premiere cs4 to adobe media encoder as a flash file.
    at the moment media encoder continually stops after about 10 minutes with 30 or more minutes to go.
    the footage is 3 mins long HDV and I have used after effects to key out the footage.
    I have tryed flash 8 and higher with the bit rate set at 900
    thanks Rodney

    It's pretty easy. Once installed, the Cineform codec becomes available to any video program that accepts new codecs.
    For handling HDV material Cineform products come with a program called HDLink with which you can batch-encode previously captured HDV .m2t, .mpeg, or .mov files OR capture straight to a Cineform-codec encoded .avi. The HDLink program also allows scene detection -unavailable when capturing HDV material in Premiere.
    It also creates a preset in Adobe Media Encoder which, for me, came in useful when I had an h.264 .mov that would not convert in HDLink.
    The more expensive Cineform products include an advanced rendering engine for Premiere which significantly improves handling of Cineform-codec material.
    JP

  • Adobe Media Encoder pausing rendering while working in Premiere Pro

    Hello everyone,
    So I am redering a video in Adobe Media Encoder and at the same time I am editing a new one in Premiere Pro.
    I noticed that AME is constantly pausing the rendering and did not know why. It turns out that while I'm editing a video in Premiere Pro, I am constantly pressing the space bar to start/pause the video I'm editing. While I do that, AME keeps pausing/unpausing the rendering. Somehow, pressing the space bar in PP has an effect in AME.
    I have no clue why it does that because the Premiere Pro window has the focus, not the AME one.
    Has anyone ever seen that?
    I use Windows 8 and Adobe CC.

    Hi Rallymax,
    Yes I do queue footage by having an Autowatch set up on the directories where the video is written to.  I rarely do a direct export unless testing new settings.
    Don't take this as gospel but I too had a feeling that GPU acceleration didn't happen with AME, only direct export.  Not sure where that came from, I did watch some of the recent Adobe TV Web Seminar's about new features of CC products etc, so maybe on one of those?
    I found this while trying to find out where I had seen it but it is from AMD site not Adobe so whether it's fully 100% correct I dunno:
    Adobe Media Encoder
    The Adobe Media Encoder (AME), with support for OpenCL™ and GPU acceleration, automates the production of multiple encoded versions of source files, sequences, and compositions in Premiere Pro CC. With the GPU-accelerated AME and AMD graphics technology, editors can quickly encode projects and output files for virtually any destination. AMD GPUs handle the heavy lifting, freeing the system’s CPU to perform other functions.
    I will try the same test as Jason, if I can find any AVHCD video and see what the results are.  Will be interesting.

  • Adobe Media Encoder error

    Hello every one please i really need help with exporting video in adobe premiere pro CS4.
    I am using windows xp 64bit with 8 GB of ram.
    i edit my video which is HD and it works fine but when i try to export the video.... it says.
    Installation was unsuccessful. restart Adobe Media Encoder will trigger the installer again.
    i tried to update the adobe media encoder and its the same, please help..... thank you very much.

    thank you very much for the reply, do i have to unstall adobe preimere CS4 as will or just unstall adobe media encoder and run Clean Script CS4???
    after unstall i will install adobe media encoder only right???
    thank you very much

Maybe you are looking for