Adobe Reader doesn't remember the output method user authentication

Here's the setup:
We use a network printer that is set up only using user inboxes with user authentication. There's no normal printing.
The printers are set up on the mac computers using output method > user authentication > userid and password.
This works fine for every application, but somehow it doesn't for Adobe Reader. It 'forgets' the password every now and then,
even if when you look at the user authentication, the setting is still checked, and the password is still filled in.
if I reinsert the password, and press OK, then press Print, the task is sent to the printer again, only this time, it actually prints.
I can't think of a reason why Adobe Reader won't remember the settings.

Merry Christmas!
I currently only have Adobe Reader 9 installed.
I did uninstalled Adobe and Acrobat, run a registry clean up....then installed Adobe Reader 9.
but still not working.
Very strange that everytime i open the program from Start-->Adobe-->Adobe Reader 9, then it starts install Reader.....it says please wait while Adobe install, it takes another 2 minutes then it opens.
If I open by double click on the.pdf file, it then ask what program do you want to open this file. I selected Adobe Reader 9, then it opens without any installation windows.

Similar Messages

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

USB flash disk is not mounting, Xfce doesn't remember the setting

Hello,
I'm new in Archlinux and I think I can't set up it well. I use Linux for four years /Ubuntu, Debian/.
Now I have installed system with X server, Slim and Xfce.
1/ I have one big problem. I want to automount my flashdisk but it doesn't work like in Debian. I don't know what is wrong. When I put my flashdisk to USB, it's blinkig but nothing else happened. But I see the flashdisk in lsusb
[root@arch martin]# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 003: ID 04d9:048e Holtek Semiconductor, Inc. Optical Mouse
Bus 001 Device 003: ID 1005:b113 Apacer Technology, Inc. Handy Steno 2.0/HT203
2/ Xfce doesn't remember the settings... When I log out and log in again, the panel, desktop and keyboard have the default settings all the time.
3/ All is in english. I'm from Czech Republic /excuse my bad english/ and I want to have applications in czech language. I've set up and generated locales but nothing happened...
Thank you a lot to solve those problems!!
Some files...
rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="cs_CZ.utf8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Prague"
KEYMAP="cz-qwertz"
CONSOLEFONT="lat2-16"
CONSOLEMAP="8859-2"
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(nvidia)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
#interface=eth0
#address=192.168.0.2
#netmask=255.255.255.0
#broadcast=192.168.0.255
#gateway=192.168.0.1
# DHCP example
interface=eth0
address=
netmask=
gateway=
#interface=
#address=
#netmask=
#broadcast=
#gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus udev evdev network netfs crond slim)
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
/etc/X11/xinit/xinitrc
#!/bin/sh
userresources=$HOME/.Xresources
usermodmap=$HOME/.Xmodmap
sysresources=/etc/X11/xinit/.Xresources
sysmodmap=/etc/X11/xinit/.Xmodmap
# merge in defaults and keymaps
if [ -f $sysresources ]; then
xrdb -merge $sysresources
fi
if [ -f $sysmodmap ]; then
xmodmap $sysmodmap
fi
if [ -f "$userresources" ]; then
xrdb -merge "$userresources"
fi
if [ -f "$usermodmap" ]; then
xmodmap "$usermodmap"
fi
# start some nice programs
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
for f in /etc/X11/xinit/xinitrc.d/* ; do
[ -x "$f" ] && . "$f"
done
unset f
fi
#twm &
#xclock -geometry 50x50-1+1 &
#xterm -geometry 80x50+494+51 &
#xterm -geometry 80x20+494-0 &
#exec xterm -geometry 80x66+0+0 -name login
exec ck-launch-session startxfce4
/etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
#login_cmd exec /bin/bash -login ~/.xinitrc %session
login_cmd exec ck-launch-session startxfce4
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user martin
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
#current_theme default
current_theme archlinux-darch-white
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
locale -a
[root@arch martin]# locale -a
C
POSIX
cs_CZ.utf8
en_US
en_US.iso88591
en_US.utf8
Last edited by Zelva (2011-09-05 18:19:15)

With xfce4 I use .....mount /dev/sd(xx) /mnt/md...
Setup .../mnt/md in /mnt with ..cd /mnt...mkdir /mnt/md
This will mount the flash drive.
I do not know automount for xfce4.

Does Adobe Reader for Android have the Flash Player Runtime

I have a PDF document that I generate which contains an embedded Flex application.
It works fine with the desktop version of PDF reader. However. It doesn't appear that
PDF reader for Android contains the Flash Player runtime.
Can someone from Adobe confirm this ?
Thanks.

Dov, you confimed that Adobe Reader for Android has the Flash Player Runtime - I thought this feature is necessary to be able to show embedded (flv) videos?
What about viewing cross platform proof PDF files containing mp4 (H.264) embedded videos?
Up to now I’m forced to show ezPDF Reader in my workflow scenarios - think about the bad psychology that I always will have explain that the rich media PDF workflows could work with Adobe products, but Adobe itself seems to limit PDF use cases in order not to become a competitor of let’s guess of FOLIO?
Please explain me why? No market? I would like to contradict as much as I can.
If someone starts to weaken the big possibilities for PDF even on mobile devices this seems to be Adobe itself: Where are the Adobe show cases showing rich media PDFs on mobile devices?
Almost everything Adobe is showing with rich media information is in DPS based on Folio (slide shows, videos etc).
You might get all the functionality much easier using PDF (seen from a classic DTP workflow using Word, FrameMaker or InDesign)
Why didn’t Adobe add more multimedia features? Where is the 3D support on mobile devices?
Has Adobe changed the overall PDF strategy?
Where is an Adobe PDF cross platform strategy for using rich media PDFs on PC, Macs, Android and iPhone/iPads?
Dieter Gust

Preview doesn't remember the last page opened

I have noticed that Preview doesn't remember the last page of the PDF documents after 30 mins of usage (or opening up several PDF files). Is there any way to make Preview always remember the last page of files irrespective of time the file was last used and number of PDF files opened? I think in SL-ML era this was probably the case but since Mavericks it seems to have changed.

Deleting "browser.download.lastDir" makes firefox unusable.
It's very annoying. I'm sick of the update to 3.6. It's getting worse with each minor update.
Hour after hour researching about this odd behavior sucks!

Adobe Reader doesn't open .pdf files anymore. Error: 213:11.

Adobe Reader doesn't open .pdf files anymore. It's written Error: 213:11. Details: laptop with Windows XP, Adobe Reader X

Are these local or online documents? If online, in what browser? If local, does the documents folder and docs themselves have sufficient permissions?
Is there anything else beside the number 213:11?

Runtime.getRuntime().exec hangs and doesn't print the output

Hi,
I have written the following code to execute the command "psexec ipaddress -u userid -p password -l -c execute.exe >> c:/25_showoutpout.txt" and print the output in 25_showoutpout.txt file.
import java.io.*;
public class ExecTest{
     public static void main(String args[]) throws IOException{
     String args1 = "psexec ipaddress -u userid -p password -l -c execute.exe >> c:/25_showoutpout.txt";
     try{
     Process p=Runtime.getRuntime().exec(args1);
int i = p.waitFor();
     System.out.println("Done.with time "+i);
     }catch(Exception e){
          System.out.println("The error is "+e);
But this program hangs and creates a blank 25_showoutpout.txt file.In the process list I can see the process running, but it doesn't redirect the output in the txt file.When i run the command from the command line it runs fine.Please help me.
Thanks in advance

Hi,
I have written the following program to get the output.But still the required output is not coming in the console file.Only the messages that gets printed in the parent console that is coming in the file.But the expected output is to get the messages from the child window which gets executed while the .exe runs.
import java.io.*;
public class RuntimeExecTest{
public static void main(String args[]){
String s = null;
String result= null;
int count =0;
try{
          // read the output from the command
String cmd = "cmd.exe /c D:/installer/PsTools.zip/PsTools/psexec.exe ipaddress -u userid -p password -l -c excute.exe >> C:/RuntimeExec_25.txt";
     Process p = Runtime.getRuntime().exec(cmd);
     InputStream is = p.getInputStream();
     // Get the std in to the process.
     OutputStream os = p.getOutputStream();
     // Get the std err from the process.
     InputStream es = p.getErrorStream();
     // Create readers for those streams.
     BufferedReader reader = new BufferedReader(new InputStreamReader(is));
     BufferedReader errReader = new BufferedReader(new InputStreamReader(es));
     String line;
     // Read STDOUT into a buffer.
     // If no STDOUT check STDERR.
     while((line = errReader.readLine()) != null){
          // Do something with data here if you wish.
     System.out.println( line );
     while((line = reader.readLine()) != null){
          // Do something with data here if you wish.
     System.out.println( line );
     System.exit(0);
catch( Exception ex )
ex.printStackTrace();
}

Browser-embedded Adobe Reader doesn't permit ink signatures

I'm not sure if this is a feature, a bug or just an annoyance, but we are unable to apply ink signatures to a PDF displayed within a browser window. The same PDF displayed in a standalone Adobe Reader 9 window will allow for ink signatures to be applied to it. Why can documents in browser windows not be ink signed?
This is problematic for us because we are deploying a web-based application which collects a signature on a PDF form, which then contains a button to proceed to the next step and save the form on the server. Using Adobe Reader standalone to view and sign the PDF breaks the functionality of the form and prevents the form being saved correctly.
Colleagues developing the application report that it works successfully using a plugin for a singature pad, but we are using a tablet PC (motion C5) with a pen to apply the ink signature. There does not appear to be a plugin for this. However, we know we can apply ink signatures in standalone Adobe Reader, we simply want the same functionality in the browser-embedded window.
So far, all suggestions we have received involving buying either alternative hardware or alternative software. Neither is very helpful. Can anyone suggest a fix or workaround using Adobe Reader? Thanks.

i don't remember how it was formulated exactly. there was no printing option found. that was on my other computer (with XP). but on Windows 7 it won't even open, i'm not even talking about printing, because i wouldn't know. the window simply blank, inactive and immediately closes. online documents load....and in the end just black window or blank Reader page. In IE it gives me "There is a problem with Adobe Acrobat/ Reader. If it is running, please exit and try again (15:3)" - every time...

My little brother has placed a lock on my ipad and since he doesn't remember the exact password, the device has been disabled since last year. what do i do

my little brother has placed a lock on my ipad and since he doesn't remember the exact password, the device has been disabled since last year. what do i do?

See the User Guide for instructions for restoring when the passcode has been forgotten.

Help!! Adobe Reader 9 - where's the accept button on licence agreement

I am unable to get at the accept button on the Adobe Reader 9 licence agreement - I have a Dell notebook laptop and screen doesn't allow me to view the whole document and no matter what I do I can't getb the page to move up!! Can anyone help ?

Hi predxeno,
Adobe Reader doesn't allow you to create PDF files--it's a PDF viewer. If you're looking to create a PDF file from a scanner, you can either use the software included with the scanner, or, better yet, you can use Acrobat. If you don't have Acrobat, you can try it free for 30 days. See www.adobe.com/products/acrobat.html for more information.
Best,
Sara

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

More information please.
Version of Reader? OS? Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciatedeas

I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciated

Restart with the Mac OS X 10.6 DVD in the drive or with the Lion USB drive connected, hold down the Option key just after the restart, tab to the installation disk, and press Enter. If the computer has a firmware password set, it needs to be provided for this to work.
(66822)

ADOBE READER doesn't respond (Highlighting Tool)

I like making use of the highlighting tool in a pdf that can be highlighted and I like to change the colors as I would if I were using this as a book to help me study.
When I highlight and click properties to change the color....I go through a lengthy process where first ADOBE READER doesn't respond.
Then to add to my 4-7 minute wait the entire screen turns a faded white and I see that blue circle rotating around as a cursor.
When the program decides to advance it leads me to "Highlight Properties" window which sometimes works but as of lately doesn't.
This entire process is very painful. To a Dad who likes watching UFC and ACTION/VOLENT MOVIES, the pain is comparable to watching "My Little Pony" or "One Direction" videos or being forced to watch a "chick flick marathon" on Father's Day! No offense to any of those who may partake in that sort of thing.
Can someone please help me before I take this program out of machine for a replacement?
-HULK
I could upload a video of the problem but I am doubtful anyone would watch it due to the severity of this issue.

Greetings, frustrated Dad,
Having just read your inquiry (I don't work for Adobe, but have used Reader and several other products) by any chance is the document you're trying to work with one that was created as a PDF from a scanned document? If what you're currently looking at was created from a scanned document, then Adobe can't "read it" in that format, as it views it as though it were an "image". Get it? And it can't highlight images, as it doesn't recognize the text. (If this isn't the case, sorry, but I can't help. I purchased a program called Nitro Pro, rather than purchasing Adobe Acrobat, and it lets me create and edit PDF's. You might want to have a look at it.) I logged on here today to view a document I'd uploaded some time ago (prior to purchasing the 3rd party PDF program and just happened to see your question. I was trying to use this online version to convert a scanned document into a Word document, as long as I was here, but it appears that THIS site along with its features, are very limited. I can store PDF's that are already created, but without purchasing, not much more can be done, other than adding text to an already PDF, or highlighting, which you've had problems with.) Don't know what browser you're using, but in Chrome, they have free extensions, including highlighters, that will let you do what you're asking about on any web page. You just download the browser extension through Google Play Store, and go to it.
Ciao,
Mambo

Adobe Reader doesn't show correct version.

Adobe Reader doesn't show correct version. How can i check if the current version (10.2.3) is installed?

Good day,
The current version of Adobe Reader is 10.1.3. You can check to see if you have this version installed by choosing Help > About Adobe Reader (Windows) or Adobe Reader > About Adobe Reader (Mac).
Kind regards,
David

I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network"

I´m having problems with my wifi an my new Macbook pro. It doesn´t remember the network so every time I log on - I have to "join a network". I have "ticked" the "remember password" box. I´m connecting to a wireless network on an regular Speedtouch router at home. I´m new to Mackintosh.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

Adobe Reader doesn't remember the output method user authentication

Similar Messages

Maybe you are looking for