I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciatedeas
I need to upgrade to mac os snow leopard from 10.5.8, and have the lion OS usb. I can't upgrade to snow leopard as my father doesn't remember the admin password. If anyone can help it would be appreciated
Restart with the Mac OS X 10.6 DVD in the drive or with the Lion USB drive connected, hold down the Option key just after the restart, tab to the installation disk, and press Enter. If the computer has a firmware password set, it needs to be provided for this to work.
(66822)
Similar Messages
-
In this report i have marked one line..if this width < 30,i need to multiply by a number 0.3 and if the width >=30,it multiplies by 0.37...how to use this logic here..??? anyone can help??
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',
T3.ItemName as 'FG Item Name',
T2.PlannedQty as 'FG Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
0 as 'FG Pending Qty',
0 as 'FG Receipt Qty',
'' as 'Issue Item Code',
'' as 'Issue Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
0 as 'Issue Item - Return Quantity',
'' as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2
UNION ALL
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',
T3.ItemName as 'Item Name',
T2.PlannedQty as 'Planned Qty',
T2.U_OD as 'OD',
T2.U_ID as 'ID',
T2.U_OD/25.4 as 'Inches',
(T2.U_OD-T2.U_ID)/2 as 'Width',
(Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',
(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription order by T2.DocNum descHi,
Try this:
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @SCCode nvarchar(30)
select @FromDate = min(S0.Docdate) from dbo.OINM S0 where S0.Docdate >='[%0]'
select @ToDate = max(S1.Docdate) from dbo.OINM s1 where S1.Docdate <='[%1]'
--Rcpt from PRDN (Condition checked for Return component exclusion also)
SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,
T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'FG Item Code',T3.ItemName as 'FG Item Name',T2.PlannedQty as 'FG Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) <30 then ((T2.U_OD-T2.U_ID)/2) *0.3 end, 0 as 'FG Pending Qty',0 as 'FG Receipt Qty','' as 'Issue Item Code','' as 'Issue Item Name',Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',0 as 'Issue Item - Return Quantity','' as 'Return Doc No',SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntryINNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCodeLEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode not in (a.ItemCode)LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode INNER JOIN OIGN d on c.DocEntry = d.DocEntryWHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,T2.PlannedQty,T2.U_OD,T2.U_ID, T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2UNION ALL SELECT T2.U_STKNO as 'PRN No', T2.PostDate as Date,T2.DocNum AS 'WorkOrderNo',
b.DocNum as 'Issue Doc No',
ISNULL(d.DocNum,'') as 'Receipt Doc No',
b.U_IssPSCName as 'SubContractor Name',
T2.ItemCode as 'Item Code',T3.ItemName as 'Item Name',T2.PlannedQty as 'Planned Qty',T2.U_OD as 'OD',T2.U_ID as 'ID',T2.U_OD/25.4 as 'Inches',(T2.U_OD-T2.U_ID)/2 as 'Width',case when ((T2.U_OD-T2.U_ID)/2) >=30 then ((T2.U_OD-T2.U_ID)/2) *0.37 end, (Select (T2.PlannedQty - (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum))) as 'Pending Qty',(Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum and a1.ItemCode in (b1.itemcode) where b1.DocNum = t2.DocNum) as 'Receipt Qty',
a.ItemCode as 'Issued Item Code',
a.Dscription as 'Issued Item Name',
Sum(ISNULL(a.Quantity,0)) as 'Total Issue Quantity',
(Select (Select ISNULL(sum(a1.Quantity),0) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry
where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode))) as 'Issue Item - Return Quantity',
(ISNULL((Select (Select a2.DocNum from OIGN a2 where a2.DocEntry = a1.DocEntry) from IGN1 a1 inner join OWOR b1 on a1.BaseRef = b1.DocNum inner join WOR1 b2 on b1.DocEntry = b2.DocEntry where b1.DocNum = t2.DocNum and a1.ItemCode in (b2.itemcode)),'')) as 'Return Doc No',
SUM(ISNULL(a.U_IssPTotWeight,0)) as 'Total Issue Weight',
SUM(ISNULL(c.U_Quantity,0)) as 'Total Receipt Weight'
from OWOR T2 inner join WOR1 T4 on T2.DocEntry = T4.DocEntry
INNER JOIN OITM T1 ON T1.ItemCode = T4.ItemCode inner join OITM T3 on T3.ItemCode = T2.ItemCode
LEFT join IGE1 a on T2.DocNum = a.BaseRef Inner JOIN OIGE b on a.DocEntry = b.DocEntry and T4.ItemCode in (a.ItemCode)
LEFT JOIN IGN1 c ON c.BaseRef = T2.DocNum and T2.ItemCode = c.ItemCode LEFT JOIN OIGN d on c.DocEntry = d.DocEntry
WHERE b.Series in('101','20') and T2.PostDate >= @FromDate and T2.PostDate <= @ToDate and b.U_IssPSCName = '[%2]'
GROUP BY T2.U_STKNO, T2.PostDate, T2.DocNum, b.DocNum, d.DocNum, b.U_IssPSCName,T2.ItemCode,T3.ItemName,
T2.PlannedQty,T2.U_OD,
T2.U_ID,T2.U_OD/25.4,(T2.U_OD-T2.U_ID)/2,a.ItemCode,a.Dscription
order by T2.DocNum desc
Thanks & Regards,
Nagarajan -
i have an ipod touch and it is disabled cause my cousin changed the password and forgot what it is so now it is stuck .. i connected it to the itunes but still the keypad didnt appear and couldnt remember the password.. anyone can help me ?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?
Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine. -
hello i forgot my i cloud password..anyone can help me to find my password.i already make a new apple id..but my icloud use another account..so how to reset my iCloud account plz hel me
Making a new Apple ID is not a good idea, since you have to reset the password for that Apple ID anyway. All of your purchases are tied to the Apple ID that the iCloud account was created under. So, you have to retrieve the password for that Apple ID in order to sign into iCloud anyway.
Go to Manage your Apple ID, and click on the Reset Password option (Apple - My Apple ID). Sign on with the Apple ID that the iCloud account was created under, and answer the security questions. If you do not remember the answers to the Security Questions, contact Apple Support to have them reset:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB -
Help! I recently upgraded to OS 10.9.4 from 10.6.8, and now when I want to send an email to a group in my contacts I am no longer able to select the group as a whole. I have to select each address individually. This can't be right. With 10.6.8 I used to be able to double click on the name of the group and they would all be selected. I've also noticed that my address book is now called "contacts." Thanks in advance for your help.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
computer and after the chime press and hold down the OPTION key until the boot manager
screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.4 update: OS X Mavericks 10.9.4 Update (Combo). -
I have photos on a USB memory stick which I want to put onto my iPad. I bought the USB adaptor but for some reason the iPad is not recognising the memory stick. Can anyone help? Thank you
You need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them. But a lot of USB memory sticks need more power than is supplied to the kit, so you may need a powered hub between it and kit.
-
I can't remember my admin password, what can I do? Help!
I am having trouble remembering my admin password. Is there a way I can reset it?
Please help!Resetting User Password in Lion, Mountain Lion, Mavericks & Yosemite
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton -
My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.
I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
iPad User Guide for iOS 6
iPad User Guide for iOS 7 -
I have forgotten my master password and my admin password. What can I do to get the passwords or reset them?
-
Apparently I have 2 apple IDs, but not on purpose. The first is my former email address used for my iPod Touch. When I later purchased an iPad2, I thought I updated my Apple ID using my new email and new married name. Apparently I created a second. I want to consolidate them using my current email, etc. But I can't remember my old password. I can't do a password reset bcz. it sends the link to my former/deactivated email. Security Qs like d.o.b. don't "match." So, when I use my iPod & it requires my password to carry out certain functions, I'm stuck. Please help! Thx
No.
I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
Recover use of the account:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions -
Hi gang,
I am in a very frustrating position as I try to upgrade my Mac Mini (mid 2010) from OS X 10.6.8 Snow Leopard to whatever the latest version of Mountain lion is. The reason I am doing this is because the original hard drive died and the Mini sat there for 6 months before we decided to get a new hard drive and revive it.
I installed a new 500GB 7200rpm SATA drive and the problems began.
First I couldn't get Mountain Lion installed as a fresh OS installation (using both a USB drive and a DVD to no avail). It just wouldn't go. The grey Apple logo/loading screen would come up and just sit there doing nothing while the loading icon spun.
I then tried installing Snow Leopard (the OS that the Mini came with when it was new). After some messing around, that got done.
However, a peculiar thing happens when the Mini boots. Everything loads up into Snow Leopard, but although the mouse curser moves, I cannot click on anything or use the keyboard for 4-5 minutes. Then it just work (I am typing this on the Mini). This happens every time.
Now, when I updated to 10.6.8, I was able to load up the App Store and download the Mountain Lion install app. I clicked it and went through the initial copying of files and then the restart, but after the reboot, the grey loading screen would not progress. I rebooted again and held down the Option key to check out the available boot volumes, and all I saw was the installation DVD I had in there for Snow Leopard and a hard disk volume called "Mac OS X Installer."
So I booted into the Snow Leopard install DVD and opened Disk Utility to check things out. I did a verify disk and a permissions repair. Interestingly, the first repair I did gave me the message that the ACL was missing from Volumes and that is was fixed. I read something somewhere which talked about the Access Control List and mouse/keyboard issues. But who knows. When I boot back into the Mini as normal I am returned to the fully-functioning Snow Leopard installation, like nothing happened.
And now here is the kicker: it appears that the Firewire bus is hooped. In the Profiler, when I view the FireWire settings I get the message, "Warning: Unable to list FireWire devices." So I am pretty sure the one thing I cannot do is boot the Mini into target disk mode attached to my Mac Pro and installed Mountain Lion that way.
So to recap: I can't finish the Mountain Lion installation because the install won't continue after rebooting because there is something wrong with the underlying base system, which might be hardware (FW bus) related. I think.
Some things I have tried:
Resetting the SMC
Resetting the PRAM
Reparing permissions
Booting into Safe Mode (doesn't work)
Booting into Verbose Mode to observe what happens (I get the "Can't load the Bootcache.playlist" error, which I suspect is related to the screwed up FW bus)
Trying to boot using Internet Recovery (doesn't work)
Booting into Single User Mode and attempting the "fsck -y" etc. sequence to try and repair the ACL that way
So I am stuck.
I guess the question is, should I get an external HD enclosure and install Mountain Lion onto the hard drive that way and hope it works when I put it back into the Mini?
Any other ideas? I have spent a couple days ******* around with this is am running out of ideas...
Any advice would be appreciated!Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
I followed the instructions and removed from /System/Library/Extensions/ the following files:
IOFireWireSerialBusProtocolTransport.kext
IOFireWireAVC.kext
IOFireWireFamily.kext
IOFireWireIP.kext
IOFireWireSBP2.kext
I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
The System Profiler says "No FireWire ports were found."
So this tells me that the FW port is probably the culprit and is messing up the installation.
So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar? -
I face a problem with my macbook air or i think it's from the lion OS cause i didn't happen with snow leopard OS the massage says ( you can't open the application ....... because powerPC applications are no longer supported). any advice ??
Mac OS X Lion has dropped support for Rosetta, the feature that allowed you to run PowerPC apps on previous OS X systems. Check if you can find a newer version of the app you are trying to run that supports Intel processors.
What application are you trying to run? Maybe I can help you find a version that runs on Lion. -
I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password
What features do you need to change the ID for?
-
I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly. Please help.
Remove preferences on Mac OS
Quit Dreamweaver.
In the Finder, navigate to /Users/Your User Name/Library/Application Support/Adobe.
Rename the Dreamweaver preferences folder:
Dreamweaver CS5: Rename the Dreamweaver CS5 folder to, for example, Old Dreamweaver CS5.
Navigate to /Users/Your User Name/Library/Preferences.
Rename the Dreamweaver preferences file:
Dreamweaver CS5: Rename the Adobe Dreamweaver CS5 Prefs file to, for example, Old Adobe Dreamweaver CS5 Prefs.
Try to re-create problem
After you have removed your existing preferences, restart Dreamweaver. The application creates new preferences files, folders, and registry entries, as applicable, using the default settings.
Then try to re-create the problem that you had before.
If the problem was resolved, then damaged preferences was the cause.
If the problem persists, then the preferences are not the cause and you can replace the original preferences.
To replace the original preferences:
Quit dreamweaver.
Delete the new preferences folder and restore the original name of the previous folder.
Maybe you are looking for
-
Any ideas for security and parental control software yet???
Just received two of the touchpads from the fire sale and gave them to my kids, both under 10. I am very interested in limiting the sites that can be accessed through the browser, as well as a few other things. Has anyone found a practical means of
-
Error when logging into Yahoo homepage
i get a question on the bottom of my screen when i log into my yahoo.com home page: Do you want to save yql?format=json&yhlVer=2&yhlClient=rapid&yhlS=150002829&yhlCT=3&yhl... from geo.query.yahoo.com? options under save are save or save as. cancel bu
-
How can I email everyone in a contact folder without having to click on each email address individually - thanks
-
URL links not working in safari
Hello, I am unable to open URL links in Safari. (iPad) all was well until a few days ago and I must have done something! Everything else is working fine. Can anyone help me sort this out. I'm sure there is something in settings but I can't find it.
-
I have been using PSE 7 and have about 8,000 photos in the catalog. I recently upgraded to PSE 8 and really like the product except that my catalog seems to become corrupted. I am not certain exactly whether this occured when I upgraded or subsequent