Adobe xi and sending document to echosign

I recetly started to receive this error when trying to upload a document to echosign for faxing. "An error occurred while trying to upload this document" Not sure why this is happening no changes except upgrading to 11.0.06. I did use my five free sends in December 2013 but have been unable to send since then. I did apply the update "adberdrupd_qfe3701155.dmg" but no change I get the same error message.
Thanks for the help.

Can you start Adobe Acrobat?

Similar Messages

How is your signature protected on adobe reader when sending documents?

How is your signature protected on adobe reader when sending documents?

It isn't signing in. I hope someone can explain this better than me but it goes something like this.
To sign you make a certificate. Either you buy the certificate from a trusted source, or you make a special public certificate, and send that to all your contacts. This sending is special - you can't just email it, because it could be a fake. People need to know it's real, perhaps by arrangement.
Anyway, people are now set to look at a PDF which says YOU signed it. They can check if the certificate you used matches the public certificate you sent. If it does, the file is unaltered. If it doesn't it is a fake. Plus, there is a third case - it might be your real signature then someone changed the PDF. But thanks to the certificate, when you validate you are told about that too.
Certificates, the law, signing and that area are complex, and you need to understand before you start. It's easy to make worthless signed documents.
By the way, I've no idea if any of this clever stuff works on iOS!!

PDF Attachment problem in Adobe form and send mail is not working

Dear Experts,
                     Recently i'm facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that i'm sending my code which i was declared in my program.Can anybody please help me to overcome this problem?
Warm Regards,
sameek.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
data: t_att_content_hex type SOLIX_TAB.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
        l_send type ADR6-SMTP_ADDR value 'Already provided an e-mail address here'.
DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
Message body and subject*
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL,
lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Customer Information Form').
TRY.
      lo_document->add_attachment(
      EXPORTING
      i_attachment_type = 'PDF'
      i_attachment_subject = 'Customer Information Form'
I_ATTACHMENT_SIZE =*
I_ATTACHMENT_LANGUAGE = SPACE*
I_ATT_CONTENT_TEXT =*
I_ATTACHMENT_HEADER =*
      i_att_content_hex = t_att_content_hex ).
    CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
Add attachment*
Pass the document to send request*
lo_send_request->set_document( lo_document ).
Create sender*
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_sender = cl_sapuser_bcs=>create( sy-uname ).*
Set sender*
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient*
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).*
Set recipient*
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(*
EXPORTING*
i_recipient = lo_recipient*
i_express = 'X' ).*
Send email*
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
message 'The Customer Information form has been emailed to the Employee' type 'I'.

I am also facing issue with email send .
apex 4.1.1 oracle 11g
create or replace procedure email ( p_email in    varchar2)
is
    l_workspace_id      number;
    l_subject           varchar2(2000);
    l_body              clob;
    l_body_html         clob;
     l_email varchar2(40);
begin
    l_workspace_id := apex_util.find_security_group_id (p_workspace => 'xyz');
    apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
l_email:= p_email;
    l_body := ' ';
    l_subject := 'You have new tasks';
    --if l_email=:P3_CONFIRM_EMAIL_ADDRESS is not null then
   -- email( l_email =>:P3_CONFIRM_EMAIL );
-- end if;
        l_body_html := '<p />The following tasks have been added.';
     apex_mail.send (
            p_to        => l_email ,
            p_from      => '[email protected]',
            p_body      => l_body,
            p_body_html => l_body_html,
            p_subj      => l_subject );
APEX_MAIL.PUSH_QUEUE;
end; I also check the log and queue but both are empty,
select * from
apex_mail_queue
select * from
apex_mail_log Kindly suggest what to do ?
I also created a process in apex , which call this procedure and pass the email address entered by user.

Cannot SEND document after EchoSign transition?! HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!

After the transition, I can login into my account, but am told I do not have permission to Send documents. This is the whole point of EchoSign. Just spent an hour on the phone waiting for Support - there are plenty of other solutions that will allow me to sign-up and send my contracts (i.e. DocuSign) so I hope you can resolve this issue quickly.

Hi Zee,
Please sign out and sign back in and check if you are able to send now.
Regards,
Rave

Adobe Acrobat and InDesign documents print once only

Hi,
Printing a 100 page 25 sheet imposed 8.5 x 14 Adobe Acrobat document is limited to only one copy. At the end of the first copy printing; printer stops and requests letter-size paper, for drawer one,
printer default is set for 8.5 x 14 and first print ran from drawer 2.
Older CS 2 imposed files, printed from IDCS2 still print multiple copies on HP 4200 duplex. The new Adobe work flow for page imposition yields a pdf file to be printed from Adobe Acrobat.
OS is 10.5.8 iMac duo core intel.
Work flow is Adobe InDesign CS5 book > flight test clear > .pdf > open with Acrobat 9.3.2 > impose with Quite Imposing > save imposed pdf > prints only one at a time
then printer stops and asks for different paper size in different drawer.
Specifically : Prints one copy means 25 sheets duplex is completed perfectly, starting the next set of 25 sheets (one document copy) is when the printer stops and asks for different paper from different drawer.
note : Evidence points to the printing control panel of CS 5.
Older imposed Adobe InDesign CS2 document opened by InDesign CS5 also will only print one document copy of 25 sheets±. Attempting to over-ride the Adobe InDesign CS5 panel for printing by selecting four copies there does not help. In other words, printing an old InDesign file from InDesign CS5 yields the same problem as printing a new InDesign CS5 imposed, saved as pdf and printed from Adobe Acrobat 9.3
Adobe forums report similar unsolved printing problems with InDesign CS4. I'm going to post this in Snow Lepord as well since my laptop has 10.6.
Suggestions ?
Garrett

Hi kostby,
I'm sure you completely answered my question, I only checked helpful because my own thick skull is blocking a full appreciation of your brilliant insight.
Sadly, I'm away from my printer for another couple of weeks, even so, this shouldn't stop me from understanding what you are saying a little better.
I downloaded and went through the file from HP and it looks to me like the obvious default HP position is one copy. Am I clear in assuming from this, and your explanation, that the CS5 software engineer has overridden my command to print four ? I am making this assumption because the default is for long edge binding and I select short-edge legal-size duplex with legal size being my default size for the printer. Thus, the change in paper size and drawer location remains a mystery.
I often print four to five copies because that is a convenient stack for my aging cutter, any number greater than one is nice because I can avoid being in the room with the printer and breathing ink dust.
I am not sure how to send the print job to a file so I can open it with BBEdit and inspect the specific commands, this is very interesting to me. Though I'm at this point without the full skill set to master using this great knowledge. Also, over the years, I've found that I don't fully retain lessons once learned but rarely used, but that's a different and perhaps personal problem.
Thank you very much,
Garrett

What is the relation between adobe forms and web dynpro

hi
what is the relation between adobe forms and web dynpro

Hi Jyothsna,
Adobe forms are advanced to smartforms and scripts.
Adobe forms are much easier than smartforms they are online forms.
they can be developed online.
Adobe forms : This is another SAP tool designed to create your own forms. The transaction for this is SFP.
How to use them: You can create a sales order form in adobe form and send to the sales reps. Sales reps can fill this form when they are not connected to internet / SAP system. Once they connect to SAP just send an e-mail to a specific user id in outlook. You got to customize and code how do you want to process once you receive this form. This enables you to create orders even when you are not connected to the system. Hence no data loss. This is not how i used though :-). This is just my idea.
What is the difference between Adobe forms and smart forms / scripts.
Smart forms / scripts are used to show the data in SAP. Most likely you will use these to print / display some kind of reciepts / forms. Many companies must be using this for hard copies / ALE / EDI or to transfer data from SAP to others.
Adobe forms are used to post data into SAP from SAP too. So this has an additional feature compared to smartforms.
Please check this link
http://www.erpgenie.com/index.php?option=com_content&task=view&id=600&Itemid=77
Web dynpro in one of the component in NETWEAVER.
Web Dynpro is the SAP NetWeaver programming model for user interfaces and provides support when developing the Web representation of business applications. The Web Dynpro model is based on the Model View Controller paradigm, and has the following features that build on the classic dynpro model:
·        Clear separation of business logic and display logic
·        Uniform metamodel for all types of user interfaces
·        Execution on a number of client platforms.
·        Extensive platform independence of interfaces
please check this link
http://help.sap.com/saphelp_nw04/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
Best regards,
raam

When I save a CS6 InDesign file as an .idml file InDesign crashes and sends a report to Adobe.

When I save a CS6 InDesign file as an .idml file InDesign crashes and sends a report to Adobe.
When I restart InDesign the .idml file is in the directory as well as a locked InDesign file.
I cannot open the .idml file, instead I get the message:
Cannot open "" file. Adobe InDesign maynot support the file format,
a plug-in that supports the file format may be missing,
or the file may be open in another location.
I can however open an InDesign .idml file that was saved from InDesign CC software.
InDesign CC software is also unable to open the .idml file that I created in CS6.

It seems to be a corrupted IDML file. Does it happen with every file or only with that one.
What is the content of that file? Did you embed images or graphics or did you ink them? Size?
Maybe that this would help you: Re: InDesign 6 is crashing when attempting to open a particular document. All others are opening OK.

Converting word documents into pdf and sending

IA company that I am applying for a position to requires that I send my resume and cover letter in a pdf format. These two documents currently exist in WORD format. How can I successfully export the documents into a pdf format and send?

Hi,
I think you have startged two discussions for the same question:
Please check the below mentioend
http://forums.adobe.com/message/5318601#5318601
~Pranav

Edit and save/send document

I have been sent a PDF document which I have now edited to include my signature. How do I save/send back?

There is a share menu in the Adobe Reader that allows you to "email" the file to others or to "Open In" another app for sharing (as well as uploading the document to Echosign for signature).
This menu item is the square with the arrow in it in the top toolbar. You can get the toolbar to show by tapping once on your document.
Pat

How can I open documents that I have had emailed to me to fill in and send back as it's not allowing me and I am paying for it ???

I have had an email from work with an attachment to fill a form out, I have opened it up in adobe and paying for me to be able to fill it out and send it back I am on my I phone can anyone tell me why the document won't open please??

Would you provide more information about what you are trying to do?
Are you trying to open a PDF attachment on your iPad/iPhone? What do you mean by "the document won't open"? Do you want to know how to open a PDF attachment? Or does the PDF document fail to open when you try?

Scrollbars disappear for text boxes when I click 'Sign' and 'Send Signed Document'!!

I recieve a number of forms from another company with which I need to fill in and return back. These boxes allow me to type into the fields, and if I type too much, a scroll bar will show so I can change it at any time I like.
The issue i'm having is because Adobe thought it'd be clever to only show the scroll bar when you click a field, when you click 'Send Signed Document', it won't allow me to edit the document again. This means any information I have typed beyond the box limit is unviewable - that's no good to the company I need to send it back to.
How do I get a scrollbar to show for this?
My only other option is to just click 'Save as' and send it, but then my document is at risk of being edited by someone else.
Any help greatly appreciated.

In the past they have, however by ticking the box to agree to the terms and conditions and adding a signature renders the form unreadable if i've typed more than the box will visibly show. In truth it's poorly done, should have made the box expandable, but I still don't see why I need to be clicking the box to get a scroll bar. If the information I type is effectively stamped down so I can't click on it again, why not give me a scroll bar so I can at least read back what i've written and/or amend things if necessary?
It's bizarre, and i'm at a loss what to do.

How do I sign a document and send it

How do I sign a document and send it?@

Hi mstee,
I took a look at your account and see that you don't have any subscriptions. You would need either Acrobat or Adobe Fill & Sign (part of Acrobat.com). Here's some getting started information for Fill & Sign: Tutorial: Introduction to Adobe Fill & Sign
Best,
Sara

I'm having a problem sending a word doc via email. I have Mac for Office 08, when I save the document as a .doc or .docx, and send it to someone, they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon. How do I fix?

I'm having a problem sending a word doc via email. I have Mac for Office 08, and I'm using Mavericks OS. When I save the document as a .doc or .docx, and send it to someone, (doesn't matter if its safari, chrome or firefox or on my yahoo or gmail accounts) they receive it as a blank document. Yet, when I open it on my Mac, it has a "word" icon and I can read it. How do I fix?

I suggest you post on the Microsoft Mac forums since it's their software you're having issues with.
http://answers.microsoft.com/en-us/mac

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a

We are trying to implement a process so that any document that needs to be printed through our Java application will be printed as PDF using Adobe Reader. For which, We created and execute the below command line to call Adobe Reader and print the PDF on a printer."C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /T "\\<Application Server>\Report\<TEST.PDF>" "<Printer Name>". Current Situation: The above command line parameter when executed is working as expected in a User's Workspace. When executed in a command line on the Application Server is working as expected. But, the same is not working while executing it from Deployed environment.Software being used: 1. Adobe 11.0 enterprise version. 2. Webshpere Application Server 8.5.5.2. Please let us know if there is a way to enable trace logs in Adobe Reader to further diagnose this issue.

This is the Acrobat.com forum. Your question will have a much better chance being addressed in the Acrobat SDK forum.

After updating to the current versions of Adobe, I can no longer scan and send emails.

After updating to the current versions of adobe, I can no longer scan and send emails nor can I open an attachment upon receiving an email.

Capt Camo wrote:
After updating to the current versions of adobe...
What exactly is "adobe"? Adobe is the name of a company that has hundreds of software products, each with a distinct name.
You are posting in the Flash Player forum; do you really receive emails with Flash attachments?
Flash Player also cannot scan or send emails.
Finally you give no information regarding your operating system, email client, etc.

Adobe xi and sending document to echosign

Similar Messages

Maybe you are looking for