ADOP hotpatch fails when aplying Consolidated Seed Table Upgrade Patch17204589; abort also fails

In process of upgradingt from 12.2 to 12.2.4. Successfully applied pre-requisities, on Section 3 of Oracle E-Business Suite Release 12.2.4 Readme (Doc ID 1617458.1)
Following error returned when applying 17204589. Confirmed only database & webtier are active; app tier is down.
App run environment is sourced.
[ERROR]
Error occurred while executing <adpatch workers=1
options=hotpatch
flags=autoskip console=no interactive=no defaultsfile=/u01/oracle/VIS/fs1/EBSapps/appl/admin/VIS/adalldefaults.txt patchtop=/u01/oracle/VIS/fs_ne/EBSapps/patch/17204589 driver=u17204589.drv logfile=u17204589.log>
Tried running adop phase=abort to stop incomplete patch & start over. However, abort also fails with following error:
[STATEMENT] Online patching tool cannot proceed when a previous patching session is incomplete
[STATEMENT] Please ensure no pending patching sessions exist before trying a new patch
[ERROR] Unrecoverable error occured. Exiting the current session.
[STATEMENT] [START 2015/04/24 09:50:44] Unlocking sessions table
[STATEMENT] [END 2015/04/24 09:50:45] Unlocking sessions table
[STATEMENT] Log file: /adop_20150424_095001.log
[STATEMENT] [START 2015/04/24 09:50:47] Unlocking sessions table
[STATEMENT] [END 2015/04/24 09:50:48] Unlocking sessions table
Can't call method "close" on an undefined value at /u01/oracle/VIS/fs1/EBSapps/appl/au/12.0.0/perl/ADOP/Phase.pm line 239.
adop exiting with status = 255 (Fail)
Any ideas on steps to resolve errors & move fw?
Thx!

Hi,
Execute "adop -status" and check for incomplete patching sessions.
You need to complete the failed adop session or abort it using the following commands:
adop phase=abort,cleanup cleanup_mode=full
adop phase=fs_clone
Those commands will take some time to complete.
Regards,
Bashar

Similar Messages

Error when executing statement for table/stored proc

Hi All,
 I am getting this error when executing IDOC to JDBC (Stored Procedure) Scenario.
 In my stored procedure I have three insert statements to insert rows in to 3 tables.
 This stored procedure is working fine for two insert statements i.e,
 For this I have created data type for stored procedure with 10 elements and executed the scenario and was successfully running.
 when I added 3rd insert statement to stored procedure ie., when i added 5 more elements to the datatype (totally 15 elements) it starts giving the bellow error in Message Monitoring.
Exception caught by adapter framework: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
Delivery of the message to the application using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'COGRP_TMP_PROC_1' (structure 'Statements'): java.sql.SQLException: General error
 Note:- I have run the stored procedure with three insert statements in Sql Server, and also by calling an external program also, and was working fine.
 Note : Is there any structure needs to be follow when working with IDOC to Stored procedure.
I am struck up with the error, can any body resolve this issue.
Thanks in Advance,
Murthy

Hi narasimha,
 This seems to be any error due to incorrect query formation.In your receiver jdbc channel set the parameter logSQLstatement = true.you can find this parameter in the advanced mode. Using this parameter you will be able to see the sql query which is generated at runtime in the audit log in RWB.
Regards,
Pragati

View objects performance issue with oracle seeded tables

While i am writing a view object on a oracle seeded tables like MTL_PARAMETERS, its taking more time to show in the oaf page.I am trying to display all these view object columns in detail disclosure of advanced table. My Application is taking more than two minutes to display the view columns of the query which is returning just 200 rows. Please help me how to improve performance when my query using seeded tables.
This issue is happening only in R12 view object and advanced tables.
Edited by: vlsn on Jun 24, 2012 11:36 PM

Hi All,
Here is architecture of my application:
Java application creates XML from the screen values and then inserts that XML
into a framework(separate DB schema) table . then Java calls a Stored Procedure from same framework DB and in SP we have following steps.
1. It fatches XML from the XML type table and inserts XML into screen specific XML TYPE table in the framework DB Schema. This table has a trigger which parses XML and then inserts XML values into GTT which are created in separate product schemas.
2. it calls Product SP and then in product SP we have business logic. Product SP
does the execution and then inserts response into Response GTT.
3. Response XML is created by using XML generation function and response GTT.
I hope u will understand my architeture this time and now let me know if GTT are good in this scenario or not. also please not that i need data in GTT only during execution and not after that. i dont want to do specific delete which i have to do if i am using normal tables.
Regards,
Vikas Kumar

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

Tabular data model: Query keeps timing out when attempting to Edit Table Properties

Tabular data model (SSDT)
Problem: I have a table in tabular data model using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in tabular data model that can be increased?
Thanks...

Hi ManikantM,
According to your description, you query keeps time out when edit table properties. Right?
In this scenario, this error is thrown when connection or query execution exceeds the time out value. Please try to import this table and then increase the connection time out seconds.
We can increase to ExternalCommandTimeout in Analysis Server Properties. Please refer to link below:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please also refer to a similar thread below:
https://social.technet.microsoft.com/Forums/office/en-US/3f83a26b-71c6-462e-8b90-2ce2ce0b9465/powerpivots-2010-query-keeps-timing-out-when-attempting-to-edit-table-properties?forum=excel
Best Regards,
Simon Hou
TechNet Community Support

PowerPivots 2010: Query keeps timing out when attempting to Edit Table Properties

Excel PowerPivots Version: PowerPivots for Excel 2010
Problem: I have a table in PowerPivot windows using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out
and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in PowerPivots that can be increased?
Regards,
....bob
Screen Shot of Error:
Bob Sutor

Hi,
We could add the seconds in the timeout values.
Then, if you want to add the timeout values for the SQL Query, please following the link to do:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
And here is a similar issue.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/59dbdd8e-9981-41c5-a02c-9365c46956e1/how-to-extend-the-timeout-for-long-running-queries?forum=sqlkjpowerpivotforexcel
Thanks,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]"

Best practice when FACT and DIMENSION table are the same

Hi,
In my physical model I have some tables that are both fact and dimension table, i.e. in the BMM they are of course separated into Fact and Dim source (2 different units) and it works fine. But I can see that there will be trouble when having more fact tables and I e.g. have a Period dimension pointing to all the different fact tables (different sources).
Seems like the best solution to this is to have an alias of the fact/transaction table and have 2 "copies" of the transaction table (one for fact and one for dimension table) in the physical layer. Only bad thing is that there will then allways be 2 lookups in the same table when fetching data from the dimension and the fact table.
This is not built on a datawarehouse - so the architecture is thereby more complex. Hope this was understandable (trying to make a short story of it).
Any best practice on this? Or other suggestions.

Id recommend creation of a view in the database. if its an oracle DB, materialised views would be a huge performance benefit. you just need to make sure that the MVs are updated when the source is updated.
-Domnic

Problem encountered when join two remote tables in a materialized view

I'm using oracle 9.2.0.6
1> I have two tables:
CREATE TABLE TEST
A VARCHAR2(100 BYTE),
C DATE
CREATE TABLE TEST1
A VARCHAR2(100 BYTE),
B TIMESTAMP
2>. I defined a prebuild table:
CREATE TABLE MV_TEST1
ID1 ROWID,
A VARCHAR2(100 BYTE),
ID2 ROWID,
B TIMESTAMP(6),
C DATE
3> I created mview logs:
CREATE MATERIALIZED VIEW LOG ON PSI_TEST.TEST
WITH ROWID
INCLUDING NEW VALUES;
CREATE MATERIALIZED VIEW LOG ON PSI_TEST.TEST1
WITH ROWID
INCLUDING NEW VALUES;
4> when I create mview:
CREATE MATERIALIZED VIEW PSI_TEST.MV_TEST1
ON PREBUILT TABLE WITH REDUCED PRECISION
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
select
test.rowid id1,
test.a,
test1.rowid id2,
test1.b,
cast(null as date) c
from test , test1
where test.a = test1.a(+);
It is created successfully.
5> problem:
when I use remote tables to do the same thing, say test and test1 are in another instance and are connected by a dbLink, I couldn't create the mview successfully:
CREATE MATERIALIZED VIEW PSI_TEST.MV_TEST1
ON PREBUILT TABLE WITH REDUCED PRECISION
REFRESH FAST ON DEMAND
WITH PRIMARY KEY
AS
select
a.rowid id1,
a.a,
b.rowid id2,
b.b,
cast(null as date) c
from test@dbl a, test1@dbl b
where a.a = b.a(+);
when run above statement, I got:
ORA-12015: cannot create a fast refresh materialized view from a complex query
Any ideas? Or joining two table through a dblink for a mview is not allowed at all?
Thanks in advance.

No one has a clue?
Message was edited by:
lzhwxy

Access 2013 crashed when I export a table from the access

Hi!
Access 2013 always crashed when I export a table from the access to the Database Symfoware.
1、The conditions of the Access 2013 crashed are the follows.
1)Create a table in the Access 2013.
2)Using the ODBC driver of the Database Symfoware to export the table from the access to the Database Symfoware.
2、The Environments are the follows.
1)Access 2013 X64(Version:15.0.4420.1017)
2)Win2008R2 X64
3)Symfoware V11.1 X64
3、The Application log from the Win2008R2 are follows.
ログの名前: Application
ソース: Application Error
日付: 2014/04/18 16:21:06
イベント ID: 1000
タスクのカテゴリ: (100)
レベル: エラー
キーワード: クラシック
ユーザー: N/A
コンピューター: WIN-29UTU2AIK6J
説明:
障害が発生しているアプリケーション名: MSACCESS.EXE、バージョン: 15.0.4420.1017、タイムスタンプ: 0x50674523
障害が発生しているモジュール名: ACECORE.DLL、バージョン: 15.0.4420.1017、タイムスタンプ: 0x506742b7
例外コード: 0xc0000005
障害オフセット: 0x0000000000171f36
障害が発生しているプロセス ID: 0xb6c
障害が発生しているアプリケーションの開始時刻: 0x01cf5ad638668c5b
障害が発生しているアプリケーションパス: C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE
障害が発生しているモジュールパス: C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL
レポート ID: 00e87957-c6ca-11e3-ad2c-0050568d2ced
イベント XML:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-18T07:21:06.000000000Z" />
<EventRecordID>3442</EventRecordID>
<Channel>Application</Channel>
<Computer>WIN-29UTU2AIK6J</Computer>
<Security />
</System>
<EventData>
<Data>MSACCESS.EXE</Data>
<Data>15.0.4420.1017</Data>
<Data>50674523</Data>
<Data>ACECORE.DLL</Data>
<Data>15.0.4420.1017</Data>
<Data>506742b7</Data>
<Data>c0000005</Data>
<Data>0000000000171f36</Data>
<Data>b6c</Data>
<Data>01cf5ad638668c5b</Data>
<Data>C:\Program Files\Microsoft Office\Office15\MSACCESS.EXE</Data>
<Data>C:\Program Files\Common Files\Microsoft Shared\OFFICE15\ACECORE.DLL</Data>
<Data>00e87957-c6ca-11e3-ad2c-0050568d2ced</Data>
</EventData>
</Event>
4、When the access crashed,I got the dump file .Then I use the Windbg got some information from the dump files.
The detailes are follows.
FAULTING_IP:
+58872faf03d6dd84
00000000`00000000 ?? ???
EXCEPTION_RECORD: 00000000001723c0 -- (.exr 0x1723c0)
ExceptionAddress: 000007fee3951f36 (ACECORE+0x0000000000171f36)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
FAULTING_THREAD: 00000000000010b8
DEFAULT_BUCKET_ID: WRONG_SYMBOLS
PROCESS_NAME: MSACCESS.EXE
ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
MODULE_NAME: ACECORE
FAULTING_MODULE: 0000000076eb0000 ntdll
DEBUG_FLR_IMAGE_TIMESTAMP: 506742b7
ERROR_CODE: (NTSTATUS) 0x80000003 - {
EXCEPTION_CODE: (NTSTATUS) 0x80000003 (2147483651) - {
MOD_LIST: <ANALYSIS/>
CONTEXT: 0000000000171ed0 -- (.cxr 0x171ed0)
rax=0000000001be3598 rbx=0000000000000000 rcx=01cf5d1b0f402a5c
rdx=0000000009cfad30 rsi=0000000006688ef0 rdi=0000000001be35d0
rip=000007fee3951f36 rsp=0000000000172490 rbp=00000000001727a0
r8=0000000009b409d0 r9=0000000006688ef0 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000001be19f0
r14=0000000009cfad30 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
ACECORE+0x171f36:
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12 ds:00000000`00000000=????????????????
Resetting default scope
PRIMARY_PROBLEM_CLASS: WRONG_SYMBOLS
BUGCHECK_STR: APPLICATION_FAULT_WRONG_SYMBOLS
LAST_CONTROL_TRANSFER: from 000007fee395c095 to 000007fee3951f36
STACK_TEXT:
00000000`00172490 000007fe`e395c095 : ffffffff`ffffffff 00000000`00000000 00000000`01bddaa2 ffffffff`ffffffff : ACECORE+0x171f36
00000000`001727b0 000007fe`e388f8eb : 000007fe`e399dc10 000007fe`e399dc30 000007fe`e399dc50 00000000`000000f9 : ACECORE+0x17c095
00000000`00172b50 000007fe`e388f590 : 00000000`06688ef0 00000000`00000004 00000000`000000f9 00000000`00000000 : ACECORE+0xaf8eb
00000000`00172ba0 000007fe`e388f406 : 00000000`00000004 00000000`000000f9 00000000`11cb1130 00000000`000000f9 : ACECORE+0xaf590
00000000`00172c30 000007fe`e391aee7 : 00000000`00000000 00000000`00173198 00000000`06688ef0 00000000`11cb0998 : ACECORE+0xaf406
00000000`00172c70 000007fe`e3933a72 : 00000000`00400100 00000000`00000002 00000000`00000001 00000000`06688ef0 : ACECORE+0x13aee7
00000000`00172e50 000007fe`e384e5b1 : 00000000`00000000 00000000`11cb0020 00000000`06688ef0 00000000`00000001 : ACECORE+0x153a72
00000000`00172e90 000007fe`e38358d1 : 00000000`000007ff 00000000`06688ef0 00000000`01bd99f0 00000000`00000000 : ACECORE+0x6e5b1
00000000`00173280 000007fe`e38718eb : 00000000`000007ff 00000000`06688ef0 00000000`11cb0000 00000000`00000000 : ACECORE+0x558d1
00000000`00173340 00000001`3f3b0cd2 : 00000000`0a0945c0 00000000`000000fe 00000000`000007ff 00000000`00000000 : ACECORE+0x918eb
00000000`00173430 00000001`3f3b0b9b : 00000000`00173730 00000000`001741e0 00000000`065e5b00 00000000`00000100 : MSACCESS!CreateIExprSrvObj+0x16af32
00000000`00173630 00000001`3f3afcea : 00000000`00173730 00000000`00000000 00000000`00000000 00000000`065e5b00 : MSACCESS!CreateIExprSrvObj+0x16adfb
00000000`001736a0 00000001`3f983140 : 00000000`00174401 00000000`0a3235e0 00000000`0a319aa0 00000000`00179fc8 : MSACCESS!CreateIExprSrvObj+0x169f4a
00000000`00174290 00000001`3f3aabeb : 00000000`00000000 00000000`00000000 00000000`00179f38 00000000`00000000 : MSACCESS!FUniqueIndexTableFieldEx+0x26ab4
00000000`00174530 00000001`3f3a9670 : 00000000`001778e0 00000000`00179f38 00000000`00000031 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x164e4b
00000000`00177870 00000001`3f3a8c1b : 00000000`00000010 00000000`108c5990 003d0044`00570050 00000000`74ac3f69 : MSACCESS!CreateIExprSrvObj+0x1638d0
00000000`001779d0 00000001`3f5450df : 00000000`0a0945c0 00000000`0000009c 00000000`0a0945c0 00000000`00000000 : MSACCESS!CreateIExprSrvObj+0x162e7b
00000000`00179e30 00000001`3f64e915 : 00000000`43ed8000 00000000`00000000 00000000`3f800000 00000000`00000000 : MSACCESS!FillADT+0x5830b
00000000`0017c450 00000001`3f33b172 : 00000000`00000000 00000000`0006075e 00000000`0017e370 00000000`00000000 : MSACCESS!IdsComboFillOfActidIarg+0xaddf1
00000000`0017d730 00000001`3f33a9ef : 00000000`0017e0a0 00000000`00000b86 00000000`00000000 00000000`0fea0000 : MSACCESS!CreateIExprSrvObj+0xf53d2
00000000`0017d790 00000001`3f33a20c : 00000000`06620400 00000000`00000000 00000000`00000001 00000000`0017e420 : MSACCESS!CreateIExprSrvObj+0xf4c4f
00000000`0017e400 00000001`3f6019cd : 0071023b`007a000a 00000000`00374a30 00000000`00000005 00000000`0000000c : MSACCESS!CreateIExprSrvObj+0xf446c
00000000`0017e850 00000000`06706fd5 : e2504700`aa00ee81 00005d1b`0f2363ea 00000000`0017e9e0 00000001`3f200000 : MSACCESS!IdsComboFillOfActidIarg+0x60ea9
00000000`0017e8f0 00000000`0a30c378 : 00000000`00000000 00000000`00000008 00000000`067069ac 00000000`00000000 : 0x6706fd5
00000000`0017e960 00000000`00000000 : 00000000`00000008 00000000`067069ac 00000000`00000000 00000000`00000008 : 0xa30c378
FOLLOWUP_IP:
ACECORE+171f36
000007fe`e3951f36 4d3927 cmp qword ptr [r15],r12
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: ACECORE+171f36
FOLLOWUP_NAME: MachineOwner
IMAGE_NAME: ACECORE.DLL
STACK_COMMAND: .cxr 0x171ed0 ; kb
BUCKET_ID: WRONG_SYMBOLS
FAILURE_BUCKET_ID: WRONG_SYMBOLS_80000003_ACECORE.DLL!Unknown
WATSON_STAGEONE_URL: http://watson.microsoft.com/StageOne/MSACCESS_EXE/15_0_4420_1017/50674523/unknown/0_0_0_0/bbbbbbb4/80000003/00000000.htm?Retriage=1
Followup: MachineOwner
5、Where the access crashed I used the ODBC trace to get the trace log of the ODBC API.
The ODBC API called by Access before it crashed are the follows.
I also ansysised the log,and I did not find any Abnormal.
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
6
SWORD
-8 <SQL_C_WCHAR>
PTR 0x00000000002C1F20 [
12] "LENGTH"
SQLLEN 62
SQLLEN * 0x00000000002C1E38 (12)
Test 1174-10f0
ENTER SQLGetData
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38
Test 1174-10f0
EXIT SQLGetData with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
10
SWORD
99 <SQL_C_DEFAULT>
PTR <unknown type>
SQLLEN 4
SQLLEN * 0x00000000002C1E38 (-1)
Test 1174-10f0
ENTER SQLFetch
HSTMT 0x0000000009F7C490
Test 1174-10f0
EXIT SQLFetch with return code 100 (SQL_NO_DATA_FOUND)
HSTMT 0x0000000009F7C490
Test 1174-10f0
ENTER SQLFreeStmt
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
Test 1174-10f0
EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS)
HSTMT 0x0000000009F7C490
UWORD
0 <SQL_CLOSE>
6、I also did the test with the Access 2010,and with the Sql Srever/Oracle.
The results are the follows.
1) With the Access 2010(X86 or X64) and Access 2013 X86,it successes when I export the table to the DB Symfoware.But only with the Access 2013 X64,the Access crashed.
2)With the Access 2010(X86 or X64) and Access 2013(X86 or X64),using the Sql Srever/Oracle,it always successes .
According to all the descrived above, I wonder if it a bug of the Access2013 .
Could anyone can help me ?
Thanks for any help.

George Zhao
Thank you for your help.
I have already install
the latest patches of the Office 2013.But it doesn't work.It is down also too. And ODBC
drive of Database Symfoware is the newest driver of the Database Symfoware. Now I wonder that
if it si a bug of the ODBC
drive of Database Symfoware,I should fix the bug,but I have analysised the odbc trace log and I do not find any wrongs ,so I think maybe it is a bug of the Access .
I have see many situations about the Access down on the internet .

How to know or check the type of a field when processing a dynamic table?

Dear all,
 When processing a dynamic table i have a short dump because of a convert_of_type incorrect, so i would like to check the type of field-symbol <f> before moving the data (type char) to this field-symbol <f>.
Could you please help me how to check or get the type of field-symbol <f> (because field-symbol <f> is assigned dynamic, so this <f> can be type char, unit, or quantity, ...)?
The source code same as below:
 ASSIGN COMPONENT lc_field OF STRUCTURE ls_data TO <f>.
 MOVE lv_field TO <f>. (Dump is here when lv_field is char type and <f> is quantity type => could i check the type of <f> if it's char type before using this instruction "MOVE ..."?)
Thanks a lot in advance,
Vinh Vo

Try to use this way
WRITE lv_field TO <f>.
Instead of
MOVE lv_field TO <f>.
a®

Error "Error in ABAP statement when processing an internal table. table."

Hello,
I am facing the error when tried for GR from SRM portal for my shopping cart and for others created shopping cart. The error is
"Error in ABAP statement when processing an internal table. table."
I have the central receipient role. Couold any body assist me?
Thanks,
Pijush

Hi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh

File to JDBC :Error when executing statement for table/stored proc.

Hi,
I am getting following error when i am trying to insert data into z-table using JDBC recr adapter.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTEST' (structure 'STATEMENT'): java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Invalid object name 'ZTEST'.
But the database table name 'ZTEST' exists in the system.
XML structure:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <TEST action="INSERT">
 <table>ZTEST</table>
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>ABC</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </TEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

Hi,
I have changed my MT str but still getting the same error.Is it possible to insert/ update a z-table using JDBC adapter.
XML str:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_RECR xmlns:ns0="http://urn:srini/FileToJDBC">
 <STATEMENT>
 <ZTEST action="INSERT">
 <access>
 <ROLLNO>123</ROLLNO>
 <FIRSTNAME>abc</FIRSTNAME>
 <LASTNAME>XYZ</LASTNAME>
 </access>
 </ZTEST>
 </STATEMENT>
</ns0:MT_RECR>
Regards,
Srinivas

My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

Trigger a process(IDOC) when Data in Z-table updated

Hi All,
I am working on an interface and the outbound IDOC from R/3 to XI needs to be triggered when a particular field value in a Z*table changes.
So far I am able to trigger the IDOC from the calling Z*prog which updates this table, but I need some exit, PAI etc which will get triggered only when the data in table is updated.
Current Flow chart:
Z-prog starts--->Updates a Z-table--->if sy-subrc=0--->I create an IDOC from the Z-prog itself
What I need:
Z-table is updated--->check if particular filed value changed--->Trigger IDOC
Is it possible to do this.
Many thanks
Shirin

Hi Balu,
I am triggering my IDOCS from the Z*program itself.
The trigger point is when I have successfully updated the table (sy-subrc = 0).
Then I have used the code below to populate my IDOC. I have also maintained a distribution model, so that is the reason I pass only the idoc type in edidc segment and do not pass any port , receiver etc.
Hope you find the code useful.
Regards
Shirin
Reward points if this was helpful.
*Local Data Declaration
DATA: wa_msg_header TYPE zca_msg_header,
         wa_edidc      TYPE edidc,
         wa_edidd      TYPE edidd,
         i_edidc       TYPE edidc OCCURS 0,
         i_edidd       TYPE edidd OCCURS 0,
         wa_trailer    TYPE zca_gs_trailer,
         wa_count(10) TYPE n,
         wa_allocation_response TYPE zca_allocation_response.
*Populate IDOC segments
* 1. Save the message type and the basic IDoc type* in the control segment
MOVE 'ZMT_ALLOCATION_RESPONSE' TO wa_edidc-mestyp.
MOVE 'ZGS_ALLOCATION_RESPONSE' TO wa_edidc-idoctp.
* 2. Populate the Genius specific Message Header 'ZCA_MSG_HEADER'
wa_msg_header-source        = 'SOURCE_SYST'.
wa_msg_header-destination   = 'DESTINATION-LS.
wa_msg_header-message_id    = ''. "Populate this in XI
wa_msg_header-date_time     = ''. "populate this in xi.
wa_msg_header-message_typ   = 'I'.
wa_msg_header-status        = 'S'.
MOVE 'ZCA_MSG_HEADER' TO wa_edidd-segnam.
MOVE wa_msg_header    TO wa_edidd-sdata.
APPEND wa_edidd       TO i_edidd.
CLEAR wa_edidd.
* 3 Populate the ALOCATION_RESPONSE segment
CONCATENATE 'EXAM'
               sy-datum
               sy-uzeit
               INTO
               wa_allocation_response-uid.
* wa_allocation_response-uid                 = i_set_number .
wa_allocation_response-set_number          = i_set_number .
wa_allocation_response-trigger             = '1' .              "Always default to Allocation Change   .
wa_allocation_response-next_a_exam         = i_next_a_exam .
wa_allocation_response-miles_to_a          = i_miles_to_a .
wa_allocation_response-next_b_exam         = i_next_b_exam .
wa_allocation_response-miles_to_b          = i_miles_to_b.
wa_allocation_response-next_major_exam     = i_next_maj_exam .
wa_allocation_response-miles_to_major_exam = i_miles_to_maj_exam .
MOVE 'ZCA_ALLOCATION_RESPONSE' TO wa_edidd-segnam.
MOVE   wa_allocation_response   TO wa_edidd-sdata.
APPEND wa_edidd                 TO i_edidd.
CLEAR wa_edidd.
*4 Populate the Trailer record 'ZCA_TRAILER'
wa_trailer-data_marker = 'T'.
wa_trailer-checksum     = wa_count.
MOVE 'ZCA_TRAILER' TO wa_edidd-segnam.
MOVE wa_trailer       TO wa_edidd-sdata.
APPEND wa_edidd       TO i_edidd.
CLEAR wa_edidd.
* Check for distribution model and create the IDOC
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE'
    EXPORTING
      master_idoc_control            = wa_edidc
    TABLES
      communication_idoc_control     = i_edidc
      master_idoc_data               = i_edidd
    EXCEPTIONS
      error_in_idoc_control          = 1
      error_writing_idoc_status      = 2
      error_in_idoc_data             = 3
      sending_logical_system_unknown = 4
      OTHERS                         = 5.
* No need for error handling here as the IDOC will be created and ststus record will
* mention the latest ststus including any error message.

Why do i get integer values instead of decimals when selecting a mysql table through an oracle xe DB?

Hi
My company just started a new project that implies migrating every hour operational data from a mysql database located at another company to our main DB (oracle10gR2). Between these two DB, we have an oracle XE DB which contains the database links to both DB and a procedure to get (from mysql) and insert (oracle10g) the values. What happens is that in the mysql DB, the values have decimals and, when i select the table in oracle, i only see integer values (no decimals). Here is an example of the select i use:
SELECT "v_hour", "v_date", "v_type", "v_tabstamp","v_value"
FROM "tab1"@mysql;
How can i work around this problem?
Many thanks!

Maybe just a HS_LANGUAGE setting issue.
You could try that:
1a) in the gateway init file, please set HS_LANGUAGE=GERMAN_GERMANY.WE8ISO8859P1
2a) now open a new SQL*Plus session ans select from your table using the gateway based database link
=> if the values are now including the decimal part then your foreign database is set up to use a comma as the decimal separator and you have to make sure that the HS_LANGUAGE contains a territory that uses as decimal separator a comma.
If you still do not get the decimal values, then change it to:
1b) HS_LANGUAGE=american_america.we8iso8859P1
2b) Make sure you start again a new SQL*Plus session (the gateway init file is only read when you use the database link in your session for the first time (or explicit closed it before). Select again from your table.
=> is the decimal part now visible?
More details can be found in the gateway note: Gateway and Decimal Digits(Doc ID 1453148.1) available from My Oracle Support portal.
- Klaus

ADOP hotpatch fails when aplying Consolidated Seed Table Upgrade Patch17204589; abort also fails

Similar Messages

Maybe you are looking for