ADS configuration wizard has errors in CE 7.2?

Just installed CE 7.2 (JAVA only) and deployed Adobe Document Services.  I tried to use the configuration wizard for ADS and 3 steps errored out for the following reasons:
STEP:  MAINTAIN ABAP TO ADS CONNECTION - ERROR:  JCO_ERROR_FUNCTION_NOT_FOUND: DEST_EXISTS
STEP:  CONFIGURE LOGICAL PORTS FOR WEB SERVICE CONSUMER PROXIES - ERROR:  Not able to load Function FPRFC_CONFIG_LOGPORTS (cause:Function template FPRFC_CONFIG_LOGPORTS could not be retrieved.).
STEP:  CREATE CONNECTION DEPENDENT CONFIGURATION (FPCONNECT) - ERROR:  Not able to load Function FPRFC_CONFIG_FPCONNECT (cause:Function template FPRFC_CONFIG_FPCONNECT could not be retrieved.).
Has anyone used the configuration wizard successfully in CE 7.2 for ADS?  
Does anyone know what these errors mean?
Thank you!

I am closing this.  I found out that you can only use the wizard if you have an ABAP+JAVA double stack system.  I did the configuration manually and it worked.

Similar Messages

  • Installer ias to OC4J Instance Configuration Assistant  has error

    os：AIX 5.3 5300-06
    installer：Oracle Application Server 10.1.2.0.2
    Symptoms：the successful installation infrastructure but installation ias to OC4J Instance Configuration Assistant has error
    Deploying application 'reports' to OC4J instance 'OC4J_BI_Forms'.
    FAILED!
    ERROR: Caught exception while deploying 'reports' to 'OC4J_BI_Forms':
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
         at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
         at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    Caused by: com.evermind.client.orion.AdminCommandException: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: A remote host refused an attempted connect operation.
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:115)
         ... 9 more
    Caused by: java.net.ConnectException: A remote host refused an attempted connect operation.
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:331)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:196)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:183)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.connect(Socket.java:428)
         at java.net.Socket.<init>(Socket.java:335)
         at java.net.Socket.<init>(Socket.java:179)
         at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2346)
         at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
    Deploying application 'discoverer' to OC4J instance 'OC4J_BI_Forms'.     at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
         at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
         ... 9 more
    FAILED!
    ERROR: Caught exception while deploying 'discoverer' to 'OC4J_BI_Forms':
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
         at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
         at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    Caused by: com.evermind.client.orion.AdminCommandException: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: A remote host refused an attempted connect operation.
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:115)
         ... 9 more
    Caused by: java.net.ConnectException: A remote host refused an attempted connect operation.
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:331)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:196)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:183)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.connect(Socket.java:428)
         at java.net.Socket.<init>(Socket.java:335)
         at java.net.Socket.<init>(Socket.java:179)
         at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2346)
         at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
         at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
         at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
         ... 9 more
    Deploying application 'formsapp' to OC4J instance 'OC4J_BI_Forms'.
    FAILED!
    ERROR: Caught exception while deploying 'formsapp' to 'OC4J_BI_Forms':
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
         at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
         at oracle.j2ee.tools.deploy.Oc4jDeploy.doDeploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.execute(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.deploy(Unknown Source)
         at oracle.j2ee.tools.deploy.Oc4jDeploy.main(Unknown Source)
    Caused by: com.evermind.client.orion.AdminCommandException: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: A remote host refused an attempted connect operation.
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:115)
         ... 9 more
    Caused by: java.net.ConnectException: A remote host refused an attempted connect operation.
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:331)
         at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:196)
         at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:183)
         at java.net.Socket.connect(Socket.java:478)
         at java.net.Socket.connect(Socket.java:428)
         at java.net.Socket.<init>(Socket.java:335)
         at java.net.Socket.<init>(Socket.java:179)
         at com.evermind.server.rmi.RMIConnection.connect(RMIConnection.java:2346)
         at com.evermind.server.rmi.RMIConnection.lookup(RMIConnection.java:1800)
         at com.evermind.server.rmi.RMIServer.lookup(RMIServer.java:725)
         at com.evermind.server.rmi.RMIContext.lookup(RMIContext.java:149)
         at com.evermind.client.orion.Oc4jAdminConsole.executeCommand(Oc4jAdminConsole.java:106)
         ... 9 more
    Starting OC4J instance 'OC4J_Wireless'...done.

    Just ran into this exact same issue. We also resolved it by modifying our /etc/hosts.
    Our /etc/hosts used to have its hostname specified this way:
    123.123.123.12 hostname hostname.dom.com
    We changed the order to the last two items to this:
    123.123.123.12 hostname.dom.com hostname
    Apparently the services are instantiated using the fully-qualified hostname.

  • Exchange 2013 Hybrid Configuration Wizard OAuth error

    Hi,
    We are facing following error when we run OAuth configuration after complete the Hybrid Configuration Wizard.
    Error:
    ScenarioFailureException
    Message:
    Exchange OAuth authentication couldn‎'t find any accepted domains in your on-premises organization.
    Verify you‎'ve configured at least one on-premises accepted domain.
    Location:
       at Microsoft.Online.CSE.HRC.Activities.OAuthActivities.GetCertificateActivity.Run‎()‎
       at Microsoft.Online.CSE.HRC.Workflow.Activity.WorkflowBaseActivity.Launch‎()‎
       at Microsoft.Online.CSE.HRC.Workflow.Runtime.WorkflowActivityHelper.Execute‎(ActivityContext context, Boolean launch)‎
       at System.Activities.NativeActivity.InternalExecute‎(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)‎
       at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody‎(ActivityExecutor executor, BookmarkManager bookmarkManager,
    Location resultLocation)‎
    Environment:
    2x Exchange 2013 CU6 (DAG+one ClientAccess)
    Directory Sync Server
    No ADFS server since we don't need single sign on
    Office 365 E3 Tenant
    We have tried manually setup the OAuth configuration according to the below TechNet article but failed when running the ExportAuthCert.ps1
    script file. It couldn't match the certificate thumbprint with the location "Cert:\LocalMachine\My"
    http://technet.microsoft.com/en-us/library/dn594521%28v=exchg.150%29.aspx
    Please help!
    Thanks in Advance
    Roshan

    We have the exact same Issue, tried the exact same setup and NO JOY!! - any resolution yet?
    Also found this article:
    http://consulting.risualblogs.com/blog/2014/09/10/exchange-2013-cu6-hybrid-users-with-o365-unable-to-query-freebusy-for-on-premises-users/comment-page-1/#comment-5192  
    ..... but did not fix the free/busy
    Best Regards,
    Francois

  • Weblogic Server 10.3.6 (64bit)- Configuration Wizard - JVM Error

    Hi Friends,
    I am new to forum threads. Please don't mind if I have posted incorrectly.
    When I try to run configuration wizard of Weblogic server 10.3.6, I am getting the following error in JVM Launcher pop-up window.
    Error : Could not Create the Java Virtual Machine
    Error : A fatal Exception has occurred. Program will exit.
    Note:
    1) I have followed  Start => Apps => Oracle WebLogic => Configuration Wizard  to load the configuration wizard.
    2) Facing the same problem while loading Fusion Middle Configuration Wizard ( Start  => Apps  => Oracl SOA 11g -Home1  => Configure Application Server )
    Kindly suggest me with the best option to resolve the same.
    Thanks in advance.
    Rajesh

    Hi Borys,
    Thanks for your kind reply,
    I have installed java-8 on my Window 8 machine, before installation of Weblogic itself and the location of JDK is "C:\Java\jdk1.8.0_25"
    And the 'C:\Middleware\SOASuite11gR1PS6\wlserver_10.3\common\bin\commEnv' (windows command script file) contains the correct JAVA_HOME location by default, i.e  JAVA_HOME=C:\Java\jdk1.8.0_25
    While installing the weblogic serv (64-bit) , I have Opened the command prompt, navigated to the directory containing the Weblogic jar and entered the below command,
    C:\Java\jdk1.7.0_35\bin\java -Xmx1024m -jar wls1036_generic.jar   And successfully got installed the same.
    Now, Do I still need to set the JAVA_HOME parameter on my windows ?
    ( FYI: when I got my windows8.1 OS with the machine, it is having default jre7 location as "C:\Program Files\Java\jre7\bin")
    Thanks,
    Rajesh

  • DHCP Split-Scope Configuration Wizard showing error "Not enough storage is available to process this command".

    Hi,
    I'm trying to split the DHCP scope between two Servers using the DHCP Split-Scope Configuration Wizard.
    Server one is a VM hosted on Hyper-V and is running Windows Small Business Server 2008 (I think this was previously SBS2003 and was upgraded at some point in time). The whole DHCP scope is currently configured on here.
    Server two is a VMware VM running Windows Server 2012 R2.
    I've installed the DHCP Server role on Server two (2012R2) and authorized the Server. When I launch DHCP Manager, add the SBS2008 Server in the MMC, right click the scope and choose "Advanced > Split-Scope", and then run through the wizard,
    I get as far as the "Percentage of Split" screen, and when I click next I get the error "Not enough storage is available to process this command".
    I've searched online for this particular error message and I've come across articles suggesting AV exclusions are not in place for the DHCP database and files, however in this case the exclusions are definitely in place and I've also tried completely disabling
    AV on both Servers and this made no difference to the outcome.
    I also came across articles suggesting the "IRPStackSize" registry DWORD needed to be added and set to a decimal value of 15 or larger. Again, I've tried adding this and rebooted both Servers but I get the same result.
    Anyway have any ideas?
    Thanks,
    Craig

    Hi Eve,
    No, there were no related events in the event logs. I've since tried splitting the DHCP scope manually but this did not work - the DHCP Server on the SBS would just stop and event: 1053 was displayed when trying to start the service again. I noticed
    that as soon as I de-activated DHCP Server on the 2012 Server then the DHCP Server on the SBS would start again.
    I then found the following in a TechNet article that would suggest I cannot have another DHCP Server on the network if using Small Business Server.
    Notes      
    A DHCP server running Microsoft Small Business Server will not operate if another DHCP server is active on its network.
    Detection of unauthorized DHCP servers requires the deployment of Active Directory Domain Services and the DHCP service. Other DHCP servers do not attempt to determine whether they are authorized by Active Directory Domain Services before offering IP address
    leases.

  • TableAdapter Configuration Wizard gives error when adding new TableAdapter

    Hi,
    I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
    Scenario 1:
    From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
    Configure TableAdapter TABLENAME failed.
    Index was outside the bounds of the array.
    Scenario 2:
    From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
    Failed to merge object(s).
    Index was outside the bounds of the array.
    Scenario 3:
    On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
    Failed to add TableAdapter.
    Index was outside the bounds of the array.
    Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
    I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
    Thanks,
    Jim

    Sorry let me clarify some of the config a little more.
    MAIL101 - Exch 2013
    MAIL102 - Exch 2013
    AP104 - Witness (strictly a witness nothing else on this machine)
    EDGE01 - Exch 2007 Edge
    CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
    CAS02 - Exch 2007 Hub/CAS
    CAS03 - Exch 2007 Hub/CAS
    MBOX01 - Exch 2007 Mail cluster
    MBOX02 - Exch 2007 Mail cluster node
    MBOX03 - Exch 2007 Mail cluster node
    RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
    DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
    All DCs are Global Catalogs.
    I can ping all DCs and root DCs fromboth MAIL101 and 102
    The Exchange Replication service is running on both MAIL101 and 102.
    DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
    DCDIAG comes back with all tests passed.
    repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
    When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed.  No errors.

  • XI 3.0  Sender Agreement error during Configuration Wizard

    Hi
    During the Sender Agreement generation of the Configuration Wizard an error occurs because it takes the value of "" for Receiver Party and Service.  This was discuused during the XI252 Session at the San Diego SAP TechEd.  The proposed solution was to copy the existing Sender Agreement and remove the "" values.  However, no Sender Agreement exists that could be copied.  Therefore, I attempted to manually create a Sender Agreement.  But now I end up with the following error:
    Thrown:
    MESSAGE ID: com.sap.aii.ib.bom.landscape.rb_landscape.SLD_***_NOT_FOUND_EX
    com.sap.aii.utilxi.swing.framework.PersistenceException: Unable to find an associated SLD element (source element: SAP_BusinessSystem, [CreationClassName, SAP_BusinessSystem, string, Name, XID, string], target element type: SAP_BCSystem)
    Has anybody encoutered this also, and more importantly, found a solution?
    Frank Deijkers

    Hi,
    I think you have to add:
    Optional: xml.addHeaderLine 0
    Obligatory: try to put the ; between quotation marks like:
    Hope this helps.
    Cheers,
    Paul

  • Is there a way to run Cisco Unified CM Assistant Configuration Wizard again in CCM 7.1(3)?

    I had issues when running the Assistant Configuration Wizard in the first time. Is there a way to run it again in CCM 7.1(3)?
    Thank you
    Marcos

    Marcos,
    The answer is no.  You can use the Cisco Unified Communications Manager Assistant Configuration Wizard only once in a Cisco Unified Communications Manager cluster configuration. The feature verifies the number of times that the configuration wizard has been run (zero or 1). If the configuration wizard has been run once, the summary window automatically displays. The summary window displays the details and status of the configuration wizard that was previously run. If the configuration has not been run, the configuration process continues.
    Hailey
    Please rate helpful posts!

  • Sharepoint 2010 - Error while running Configuration wizard for SP 2010 server farm

    Hi All,
    I am trying to set up a SP 2010 farm. I have windows server 2008 R2 installed and was able to install SP 2010 successfully. However when I ran the Sp 2010 Products and configuration wizard I am getting the following error at Step 3.
     Failed to create the configuration database.
    An exception of type System.Collections.Generic.KeyNotFoundException was thrown.  Additional exception information: The given key was not present in the dictionary.
    System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
    I have installed all the prerequisites and I am on Microsoft Geneva Framework 1.0.30624.0 . I saw on a blog that Microsoft Geneve Framework beta 2 will actually cause the above problem. However I encountered the error with Beta 1 version as well.
    Any ideas why this is happening?

    Hello together,
    I get the same error mentioned above while running the configuration wizard.
    My Serverenvironment:
    - MS Server 2008 R2 Enterprise
    - Virtual Machine (Host Machine also R2 Enterprise)
    - SQL Server 2008 -- Cumulative Update 4 for SQL Server 2008 Service Pack 1 installed
    - Prerequisites installed without error (and current versions)
    Error information:
    "Failed to create the configuration database"
    "An exception of type System.Collections.Generic.KeyNotFoundException was thrown. Additional exception information:
    The given key was not present in the dictionary"
    The logfile has the following entry:
    7/2009 10:52:48  9  ERR                    Task configdb has failed with an unknown exception
    12/07/2009 10:52:48  9  ERR                    Exception: System.Collections.Generic.KeyNotFoundException: The given key was not present in the dictionary.
       at System.ThrowHelper.ThrowKeyNotFoundException()
       at System.Collections.Generic.Dictionary`2.get_Item(TKey key)
       at Microsoft.SharePoint.Utilities.SPUtility.GetUserPropertyFromAD(SPWebApplication webApplicaiton, String loginName, String propertyName)
       at Microsoft.SharePoint.Administration.SPManagedAccount.GetUserAccountControl(String username)
       at Microsoft.SharePoint.Administration.SPManagedAccount.Update()
       at Microsoft.SharePoint.Administration.SPProcessIdentity.Update()
       at Microsoft.SharePoint.Administration.SPApplicationPool.Update()
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, SPProcessAccount processAccount, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPWebApplication.CreateDefaultInstance(SPWebService service, Guid id, String applicationPoolId, IdentityType identityType, String applicationPoolUsername, SecureString applicationPoolPassword, String iisServerComment, Boolean secureSocketsLayer, String iisHostHeader, Int32 iisPort, Boolean iisAllowAnonymous, DirectoryInfo iisRootDirectory, Uri defaultZoneUri, Boolean iisEnsureNTLM, Boolean createDatabase, String databaseServer, String databaseName, String databaseUsername, String databasePassword, SPSearchServiceInstance searchServiceInstance, Boolean autoActivateFeatures)
       at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
       at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
       at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
    Any suggestions?
    Thanks
    Christoph

  • Configuration wizard Weblogic deployment error [Admin Center]

    I'm getting an error during the "Executing WLST Script" phase of the configuration wizard.
    My environment:
    BEA Weblogic Server 10.0 (installed with Workspace Studio 1.1)
    Oracle BPM 10g3 (10.3.0.0)
    Oracle Database 10g Express
    This is what the AdmCenterConsole.log file has:
    Deploying application from C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets BPMServer (upload=true) ...
    &lt;Jan 28, 2009 11:15:59 AM PST&gt; &lt;Info&gt; &lt;J2EE Deployment SPI&gt; &lt;BEA-260121&gt; &lt;Initiating deploy operation for application, wlj2eedeployer archive: C:\OraBPMwlHome\j2ee\weblogic\deployer\wlj2eedeployer.ear, to BPMServer .&gt;
    .Completed the deployment of Application with status completed
    Current Status of your Deployment:
    Deployment command type: deploy
    Deployment State : completed
    Deployment Message : no message
    Deploying application from C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
    &lt;Info&gt; &lt;J2EE Deployment SPI&gt; &lt;BEA-260121&gt; &lt;Initiating deploy operation for application, 01-eng-bpmengine -archive: C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear-, to BPMServer .&gt;
    WLST-WLS-1233170095995: &lt;Warning&gt; &lt;DeploymentService&gt; &lt;BEA-290003&gt; &lt;Deployment service servlet encountered an exception while handling request of type "app_upload". Exception is: "*Connection reset*".&gt;
    Failed to deploy the application with status failed
    Current Status of your Deployment:
    Deployment command type: deploy
    Deployment State : failed
    Deployment Message : weblogic.deploy.api.spi.exceptions.ServerConnectionException: [J2EE Deployment SPI:260041 Unable to upload 'C:\OraBPMwlHome\ears\engine\01-eng-bpmengine.ear' to 't3://dmcad00064252:7001'
    No stack trace available.
    weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
        at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:49)
        at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
        at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:535)
        at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:427)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160)
        at org.python.core.PyMethod.__call__(PyMethod.java:96)
        at org.python.core.PyObject.__call__(PyObject.java:248)
        at org.python.core.PyObject.invoke(PyObject.java:2016)
        at org.python.pycode._pyx19.deploy$8(&lt;iostream&gt;:223)
        at org.python.pycode._pyx19.call_function(&lt;iostream&gt;)
        at org.python.core.PyTableCode.call(PyTableCode.java:208)
        at org.python.core.PyTableCode.call(PyTableCode.java:404)
        at org.python.core.PyFunction.__call__(PyFunction.java:184)
        at org.python.pycode._pyx18.deploy_Applications$61(C:\Documents and Settings\c742323\.configWizard\tmp\config.py:623)
        at org.python.pycode._pyx18.call_function(C:\Documents and Settings\c742323\.configWizard\tmp\config.py)
        at org.python.core.PyTableCode.call(PyTableCode.java:208)
        at org.python.core.PyTableCode.call(PyTableCode.java:256)
        at org.python.core.PyFunction.__call__(PyFunction.java:169)
        at org.python.pycode._pyx18.f$0(C:\Documents and Settings\c742323\.configWizard\tmp\config.py:738)
        at org.python.pycode._pyx18.call_function(C:\Documents and Settings\c742323\.configWizard\tmp\config.py)
        at org.python.core.PyTableCode.call(PyTableCode.java:208)
        at org.python.core.PyCode.call(PyCode.java:14)
        at org.python.core.Py.runCode(Py.java:1135)
        at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167)
        at weblogic.management.scripting.WLST.main(WLST.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at weblogic.WLST.main(WLST.java:29)                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi. I'm having this same exact issue. My AdmCenterConsole.log contains the same error. Additionally, the log file for my BPMDomain log contains this information:
    Current Status of your Deployment:
    Deployment command type: deploy
    Deployment State : failed
    Deployment Message : weblogic.management.ManagementException: [Deployer:149003]Unable to access application source information in '[DeploymentService:290003]Deployment service servlet encountered an exception while handling request of type "app_upload". Exception is: "Read timed out".\app\01-eng-albpmengine.ear' for application '01-eng-albpmengine'. The specific error is: No application files exist.
    No stack trace available.
    This Exception occurred at Sun Apr 19 14:29:13 CDT 2009.
    weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed.
         at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48)
         at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185)
         at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536)
         at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429)
    mick3y -- Did you happen to ever get this issue resolved?
    Thanks, Alan

  • Import error while running configuration wizard for ESR setup

    Hi, I am trying for this for last two days. but not able solve this.
    I am getting the error at the final stage of the configuration
    Error message is below
    Importing XI content
    Description
    Exception in step "INVOKEIMPRTCNTNT"
    Exception details : com.sap.aii.util.misc.api.ResourceException: Connection to system Integration Builder using application CMS-Transport lost. Detailed information: Error accessing "http://INLD50046921A:50000/rep/cmstransport/int?" with user "ESRCMSCE1". Response code is 500, response message is "Internal Server Error"
    I tried two or three times I got the same error then i canceled.
    Now I am not able to start the configuration process gain.
    Any body who has completed the configuration process please help me in this.
    Regards
    Satya

    Hi,
    I think the problem can be solved by downloading from the marketplace and importing the content manually.
    Here is a description of the process:
    http://help.sap.com/saphelp_nwesrce/helpdata/en/44/5755451622311ee10000000a155369/content.htm
    The exception was because we didnt have the needed files (correct me if I am wrong) (The import can be done before or after running the configuration wizard)
    Best regards,
    V S

  • OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

    I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
    I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
    - Oracle Database 11.2.0.1.0
    - Created Schemas using RCU 11.1.1.3.3
    - Oracle WebLogic Server 10.3.3.0
    - Oracle SOA 11.1.1.2.0
    - Oracle SOA 11.1.1.3.0 (Patch Set)
    - Oracle IAM SUITE 11.1.1.3.0
    Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
    ERROR:*
    INST:6102 Unable to connect to the database with the given credentials.
    *+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
    INST:6102 Unable to connect to the database with the given credentials.
    *+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
    When installing the Oracle Database 11gR2 I used the following install configuration:
    Oracle base: C:\MyApps\Oracle
    Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
    Database file location: C:\MyApps\Oracle\DB_HOME\oradata
    Database Edition: Personal Edition (3.27 GB)
    Character Set: Unicode (AL32UTF8)
    Global database name: orcl.dev.com
    Administrative Password: Password1
    Confirm Password: Password1
    When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
    DB TYPE: Oracle Database
    HOST NAME: localhost
    PORT: 1521
    SERVICE NAME: orcl.dev.com
    USERNAME: sys
    PASSWORD: Password1
    ROLE: SYSDBA
    I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
    REPRODUCING THE ERROR
    To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
    Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
    Next, I am on the “Database” screen where I enter the connection information
    Connection String: localhost:1521:orcl.dev.com
    (NOTE I have also tested using localhost:1521:orcl)
    OIM Schema User Name: DEV_OIM
    OIM Schema Password: Password1
    MDS Schema User Name: DEV_MDS
    MDS Schema Password: Password1
    When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
    INST:6102 Unable to connect to the database with the given credentials.
    INST:6102 Unable to connect to the database with the given credentials.
    TROUBLESHOOTING
    NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
    JDBCTest.java TEST CLIENT
    NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
    import java.sql.Connection;
    import java.sql.DatabaseMetaData;
    import java.sql.DriverManager;
    import java.sql.ResultSet;
    public class JDBCTest {
    public static void main(String[] args) throws Exception {
    String url = "jdbc:oracle:thin:@localhost:1521:orcl";
    String driver = "oracle.jdbc.OracleDriver";
    String user = "DEV_OIM";
    String password = "Password1";
    try {
    Class.forName(driver);
    Connection conn = DriverManager.getConnection(url, user, password);
    // Get the MetaData
    DatabaseMetaData metaData = conn.getMetaData();
    // Get driver information
    System.out.println("");
    System.out.println("#########################################");
    System.out.println("# ***DRIVER INFORMATION***");
    System.out.println("#");
    System.out.println("# Driver Name = " + metaData.getDriverName());
    System.out.println("# Driver Version = " + metaData.getDriverVersion());
    System.out.println("#");
    System.out.println("#########################################");
    System.out.println("");
    System.out.println("");
    // Get database information
    System.out.println("#########################################");
    System.out.println("# ***DATABASE INFORMATION***");
    System.out.println("#");
    System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
    System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
    System.out.println("#");
    System.out.println("#########################################");
    System.out.println("");
    System.out.println("");
    // Get schema information
    ResultSet schemas = metaData.getSchemas();
    System.out.println("#########################################");
    System.out.println("# ***SCHEMA INFORMATION***");
    System.out.println("#");
    System.out.println("# Schemas:");
    while (schemas.next()) {
    System.out.println("# " + schemas.getString(1));
    System.out.println("#########################################");
    System.out.println("");
    System.out.println("");
    // Get table information
    System.out.println("Tables");
    ResultSet tables = metaData.getTables("", "", "", null);
    while (tables.next()) {
    System.out.println(tables.getString(3));
    conn.close();
    } catch (Exception ex) {
    ex.printStackTrace();
    *"lsnrctl status" COMMAND TEST SUCCESSFUL*
    When the Listener Service is on I get the following output using lsnrctl status command
    C:\> lsnrctl status
    LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
    Copyright (c) 1991, 2010 Oracle. All rights reserved.
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
    Start Date 21-SEP-2010 14:43:57
    Uptime 0 days 1 hr. 15 min. 46 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
    Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
    Listening Endpoints Summary…
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    Services Summary…
    Service “CLRExtProc” has 1 instance(s).
    Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
    Service “orcl.dev.com” has 1 instance(s).
    Instance “orcl”, status READY, has 1 handler(s) for this service….
    Service “orclXDB.dev.com” has 1 instance(s).
    Instance “orcl” status READY, has 1 handler(s) for this service…
    The command completed successfully

    Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
    -Kevin

  • Re-Installing SharePoint Foundation 2010 - Product Configuration Wizard Error

    So i recently had to start fresh on my SharePoint development server. My database was left remaining on a different server during this process.
    So after re-installing SharePoint 2010, I told it to connect to an existing server farm, and then put my database server name in, from which it was able to retrieve the database name. After this step though i ran into my problems... For some reason it is
    saying i don't have the appropriate software installed to finish the Configuration Wizard, when i know i have it.
    What can I do to fix this problem? 

    Hi Zipatones,
    Honestly, it is difficult to diagnose the cause of your issue since there could be several reasons. The best I can do is give you several options one of which might be the solution.
    1) During the configuration I would let SharePoint setup a new Config database. Then setup a new web application with the same URL as your original one. Instead of creating a site collection, detach that database and attach your original database.
    2) Do the same for the service applications. Setup new service applications and then detach and attach the original databases. I highly recommend you use powershell for service apps since you need to find the guids of both the application and its proxy.
    3) You need to make sure that the new SharePoint app server has the same version of updates (such as hotfixes) installed on your previous farm.
    Hope these recommendations help.
    Daniel Christian (MCTS)

  • Error while running Configuration Wizard in SharePoint 2013: Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.

    Hi Friends,
    I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
    Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
    Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
    in Central administration like adding new WSP, Updating WSP , I get same error.
    Does any one have any Idea?
    Regards
    Gireesh Painuly

    Posted this a few weeks back - would appreciate any suggestions?
    Thanks,
    Carl

  • Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7

    Hi Techys,
    Kindly help me to resolve the below issue
    "Configuration Failed Error while running the Shareoint 2010 Products and Configuration wizard in windows 7"
    Many Thanks,
    Madhu

    Hi,
    Follow this link for smooth installation for SP 2010 on Win 7.
    http://msdn.microsoft.com/en-us/library/office/ee554869(v=office.14).aspx
    Murugesa Pandian.,MCTS|App.Development|Configure

Maybe you are looking for