Re-Installing SharePoint Foundation 2010 - Product Configuration Wizard Error
So i recently had to start fresh on my SharePoint development server. My database was left remaining on a different server during this process.
So after re-installing SharePoint 2010, I told it to connect to an existing server farm, and then put my database server name in, from which it was able to retrieve the database name. After this step though i ran into my problems... For some reason it is
saying i don't have the appropriate software installed to finish the Configuration Wizard, when i know i have it.
What can I do to fix this problem?
Hi Zipatones,
Honestly, it is difficult to diagnose the cause of your issue since there could be several reasons. The best I can do is give you several options one of which might be the solution.
1) During the configuration I would let SharePoint setup a new Config database. Then setup a new web application with the same URL as your original one. Instead of creating a site collection, detach that database and attach your original database.
2) Do the same for the service applications. Setup new service applications and then detach and attach the original databases. I highly recommend you use powershell for service apps since you need to find the guids of both the application and its proxy.
3) You need to make sure that the new SharePoint app server has the same version of updates (such as hotfixes) installed on your previous farm.
Hope these recommendations help.
Daniel Christian (MCTS)
Similar Messages
-
Dear
I need yourhelp, I am installing Sharepoint foundation 2010 prerequisites OK,
then to finish the installation get the following message"microsoft
sharepoint foundation 2010 Encountered an error during setup. One or more required components failed to Office complete successfully"
Operating System: Windows Server 2012R2
Prerequisites: OK
SharepointFoundation 2010sp2
Many thanksforyour help
part of LOG:
01/16/2015 00:37:11 1 INF Searching for registry key Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS\CentralAdministrationURL
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF The RegistryHelper has the key name as Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS and the registry hive as LocalMachine
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.RegistryHelper
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF Entering function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetValue
01/16/2015 00:37:11 1 INF Leaving function RegistryHelper.GetStringValue
01/16/2015 00:37:11 1 INF The central admin registry name CentralAdministrationURL at HKEY_LOCAL_MACHINE\Software\Microsoft\Shared Tools\Web Server Extensions\14.0\WSS could not be found. This means that either
the server is not joined to a farm or a central admin site has not been created in the farm yet.
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is CantOpenCentralAdminSiteNotExists for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id CantOpenCentralAdminSiteNotExists is Cannot browse to the SharePoint Central Administration Web Application because a SharePoint Central Administration Web
Application has not been created yet. To create one, use the SharePoint Products Configuration Wizard. Do you want to launch the configuration wizard now?
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Entering function PsconfigMessageBox.ShowMessageBox
01/16/2015 00:37:11 1 INF Entering function StringResourceManager.GetResourceString
01/16/2015 00:37:11 1 INF Resource id to be retrieved is Branding for language English (United States)
01/16/2015 00:37:11 1 INF Resource retrieved id Branding is SharePoint Products Configuration Wizard
01/16/2015 00:37:11 1 INF Leaving function StringResourceManager.GetResourceString
01/16/2015 00:37:23 1 INF Leaving function UserInterface.ShowCentralAdmin
01/16/2015 00:37:23 1 INF Leaving function UserInterface.WarmUp
01/16/2015 00:37:23 1 INF Entering function TaskDriver.Stop
01/16/2015 00:37:23 1 INF Entering function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Sending a task driver stop event: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType.stop,
01/16/2015 00:37:23 1 INF Entering function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Acquiring the writer lock to change the state
01/16/2015 00:37:23 1 INF Current state of the task driver is neverrun. You want to change it to stoppedrunning
01/16/2015 00:37:23 1 INF Changed state of the task driver to neverrun
01/16/2015 00:37:23 1 INF Released the writer lock to change the state
01/16/2015 00:37:23 1 INF Leaving function TaskDriverStateChange.Enter
01/16/2015 00:37:23 1 INF Entering function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Entering function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Received a TaskDriverEventHandler: TaskDriverEventArgs.EventCriticalityType error, TaskDriverEventArgs.EventType stop, message
01/16/2015 00:37:23 1 INF There isn't a current visible user form or the current form is not handling events, so we will handle this task driver event
01/16/2015 00:37:23 1 INF Leaving function UserInterface.TaskDriverEventHandler
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.FireOnTaskDriverEvent
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.OnTaskDriverStop
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.Stop
01/16/2015 00:37:23 1 INF UnLocking the task driver for exclusive use while warming the driver up
01/16/2015 00:37:23 1 INF Leaving function TaskDriver.WarmUp
01/16/2015 00:37:23 1 INF Entering function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF The psconfig ui application is closing
01/16/2015 00:37:23 1 INF We have do not have a main form, thus the application has been told to close prior to showing the ui at all
01/16/2015 00:37:23 1 INF Leaving function PsconfigApplicationContext.ClosePsconfigApplication
01/16/2015 00:37:23 1 INF Return code indicates a success
01/16/2015 00:37:23 1 INF Leaving function PsconfigUserInterfaceMain.MainHi Jose,
When server 2012 will not allow pre-requisite to run, due to the ASP.NET 3.5 or 4.5, do this:
Run, from admin command prompt:
Dism /online /enable-feature /featurename:NetFx3 /All /Source:<drive>:\sources\sxs /LimitAccess
you can read more here:
http://www.sharepointpapa.com/blog/_layouts/15/start.aspx#/Lists/Posts/Post.aspx?ID=86
Stacy www.sharepointpapa.com -
SharePoint foundation 2010 workflow performance issue
I need clarification for the below issue.
I have designed state machine approval workflow through VS2010.
It was worked fine for 3 months and now it is taking long time for each level of execution.
I have checked the running workflow instances in site, it is around 1800 instances for each sub site.
Application: SharePoint Foundation 2010
Farm configuration
Web server
Application Server
Database Server
Processor
Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
RAM
8 GB
8 GB
14 GB
OS
Windows Server 2008 R2 SP 1
Windows Server 2008 R2 SP 1
Windows Server 2008 R2 SP 1
Anandhan.S Remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.I have done the below configuration in production servers. Still the problem exists.
System took around 13 hours+ to proceed to next approver. Suggest some ideas to increase workflow performance.
Decreased DB server memory configuration
(Database server)
Maximum memory in SQL server reduced from
10GB to 8GB.
Increased Workflow throttle configurations
(Application & Web server)
PS C:\Windows\system32> stsadm -o getproperty -pn
workflow-eventdelivery-throttle <Property Exist="Yes" Value="150" />
(Default value is 15)
PS C:\Windows\system32> stsadm -o getproperty -pn
workitem-eventdelivery-batchsize <Property Exist="Yes" Value="150" />
(Default value is 100)
PS C:\Windows\system32> stsadm -o getproperty -pn
workflow-eventdelivery-timeout <Property Exist="Yes" Value="10" />
(Default value is 5)
PS C:\Windows\system32> stsadm -o getproperty -pn
job-workflow -url http://myweb:1333 <Property Exist="Yes" Value="Every 10 minutes between 0 and 30" />
(Default - Property Exists = “No”)
Site collection analytics
Sub-Site1: Total running workflow instances: 302
Sub-Site 2: Total running workflow instances: 58
Sub-Site 3: Total running workflow instances: 1234
Sub-Site 4: Total running workflow instances: 2
Sub-Site 5: Total running workflow instances: 2306
Sub-Site 6: Total running workflow instances: 512
Sub-Site 7: Total running workflow instances: 1631
Sub-Site 8: Total running workflow instances: 7
Sub-Site 9: Total running workflow instances: 38
Sum of workflow instances from all sites:
6090….
Farm configuration
Web server
Application Server
Database Server
Processor
Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
Intel® Xeon® CPU E5-26670 0 @2.90GHz 2.89GHz
RAM
8 GB
8 GB
14 GB
OS
Windows Server 2008 R2 SP 1
Windows Server 2008 R2 SP 1
Windows Server 2008 R2 SP 1
Anandhan.S Remember to 'mark or propose as answer' or 'vote as helpful' as appropriate. -
Sharepoint foundation 2010 integrate it with ssrs
hello,
I am integrating sql server and sharepoint foundation 2010 server both are installed in different pc,
First i have installed sql server in machine 1 ,
second i installed sharepoint foundation 2010 in machine 2
with complete mode,
third i installed sharepoint foundation 2010 in
machine 1 for minimal installation with complete mode,
and integrated ssrs.
Its working fine.
But i need to know whether we can install sharepoint foundation 2010 standalone mode in
machine 1 which is a sql server.
I hope this topic might be help full to many people's.
thanks
regards
krishnakumarHi krishnakumar,
The Short Answer: YES
The Long Answer: The report server instance cannot use the SQL Server Express Edition for its database. However, the SQL Server Express Edition instance that is installed by the SharePoint product or technology can exist side-by-side with other Database
Engine editions that you might also install. For more information about edition requirements for the report server database, see
Creating a Report Server Database.
Reference:
http://technet.microsoft.com/en-us/library/bb677368(v=sql.105).aspx
Cheers,
-Ivan -
SharePoint Foundation 2010 Workspace problem
I've installed sharepoint foundation 2010 in a Windows server 2008 R2 standard environment. I've added some site collections and added some libraries to the site pages. Ive put in various permissions and groups and tested no problem using
Sharepoint workspace 2010 on a Windows 7 32 bit client.
But when I do a remote desktop connection to another server with 2008 R2 standard installed I can't get Sharepoint workspace 2010 to work properly. It opens an account and connects to my sharepont site but in the pane to the right where I would normally
see library documents listed all that comes up is an error stating - Error: Cannot Display Tool.
Also if I try to sync I get the following error:-
The parameter is incorrect
HResult: 0x80070057 (0x386d7565)
Process: Groove.exe (ID:17936(0x00004610))
No amount of googling has found a solution, no similar postings had any resolutions.
Any help would be much appreciated
My apologies. I'd focused on the error and hadn't adequately read the information you provided on the environment. The issue is probably with using SharePoint Workspace on the remote computer, not with SharePoint Foundation.
Here is what I understand you to be doing:
You use Remote Desktop to connect to the Windows Server 2008 R2 computer, where you log in with your domain account, which is a member of the local Users group.
On the remote computer, you start SharePoint Workspace.
On the Launchbar, you click New, click SharePoint Workspace, select your site, and then click
OK.
The workspace is created and appears (from the progress bar) to download content.
When you click Open Workspace, no content is displayed. Instead, you see the "Cannot Display Tool" error.
Is that correct?
There are three areas where SharePoint Workspace is complicated to run remotely:
Where SharePoint Workspace will be run by a user other than the one installing it, it must not be lauched during the installation. This seems the most likely to be the issue, as we have seen the same failure and error at a customer site where several
users had been given a computer image created on a computer where SharePoint Workspace had been launched before image creation.
Only one user should run SharePoint Workspace (Groove.exe) at a time. (Sometimes multiple instances work, but it's not reliable.)
You need to have a local profile on the computer which is running SharePoint Workspace. SharePoint Workspace is not supported with Roaming or Temporary profiles. Usually, this problem would prevent you from starting SharePoint Workspace, but some
environments with custom permissions can lead to other errors.
SharePoint Workspace uses the current user's permissions for SharePoint server access, In the case of Forms-Based authentication, it prompts for credentials at workspace creation, but then uses the credentials in the active browser session when opening
the workspace. I think this could only be related to your problem if you are logged in as another user in your browser, and that user has access to some, but not all, of the site your workspace connects to. -
SharePoint Foundation 2010 maximum size WID
Hi,
I've installed SharePoint Foundation 2010 using the Windows Internal Database. I'm a bit confused about the maximum size of the database. On several websites I read that the max size for an SQL express database is 4GB.
Is this the same as the Windows Internal Database? Or can it grow bigger?Are you sure you mean the Windows Internal Database? The SharePoint foundation installer will install SQL Server Express edition.
-
Installtion of Sharepoint Foundation 2010 OFFLINE
Hi
I have two problems
1. I am trying to install Sharepoint Foundation 2010 and failing on pre-requisites. How can I get a FULL online installtion of this. My server is not connected to the internet directly
2. What are the latest Patches publically available for Sharepoint Foundation 2010
Regards
Jayeshhttp://blogs.msdn.com/b/opal/archive/2009/10/25/sharepoint-2010-pre-requisites-download-links.aspx
KB971831 (This KB only applies to Windows Server 2008 and Vista)
http://support.microsoft.com/kb/971831 (this is the KB article)
http://code.msdn.microsoft.com/Project/Download/FileDownload.aspx?ProjectName=KB971831&DownloadId=7285 (this is the download)
KB976462 would be the WCF Fix article for Windows 2008 R2 and Windows 7
http://support.microsoft.com/kb/976462 (link not activated yet)
http://go.microsoft.com/fwlink/?LinkID=166231 (this is the download)
Microsoft SQL Server 2008 Native Client:
http://download.microsoft.com/download/3/5/5/35522a0d-9743-4b8c-a5b3-f10529178b8a/sqlncli.msi
Microsoft "Geneva" Framework Runtime
http://download.microsoft.com/download/F/3/D/F3D66A7E-C974-4A60-B7A5-382A61EB7BC6/MicrosoftGenevaFramework.amd64.msi
Microsoft Sync Framework Runtime v1.0 (x64)
http://download.microsoft.com/download/C/9/F/C9F6B386-824B-4F9E-BD5D-F95BB254EC61/Redist/amd64/Microsoft%20Sync%20Framework/Synchronization.msi
Microsoft Chart Controls for Microsoft .NET Framework 3.5
http://download.microsoft.com/download/c/c/4/cc4dcac6-ea60-4868-a8e0-62a8510aa747/MSChart.exe
Microsoft SQL Server 2008 Analysis Services ADOMD.NET
http://download.microsoft.com/download/A/D/0/AD021EF1-9CBC-4D11-AB51-6A65019D4706/SQLSERVER2008_ASADOMD10.msi
Or you can run below powershell to download prereqisusts from internet computer.
http://gallery.technet.microsoft.com/office/bcf3332d-f726-4ac7-b01a-eeda4b7ece8e
If this helped you resolve your issue, please mark it Answered -
Can not access Central Administration in SharePoint Foundation 2010
Hi,
I have installed SharePoint foundation 2010 in Windows 7 machine. I can able to login into Central Administration. I can view Main page. But I can not enter into even any one setting. If i click any link i am getting login page again and I entered same Username
and Pwd. its asking again and again .
For example if i click Manage "Web application" link the login page comes again and its not getting my Username and Password. Some times its showing Access Denied Error.Hi,
According to your post, my understanding is that you still got the login prompts in the Central Administration.
You can use the following steps, then check whether it works.
Open Internet Explore. Go to Internet Options -> Security -> Local Intranet -> Sites -> Advanced ,and add your central admin url.
You can also disable the
loopbackcheck as below.
Click Start, click Run, type regedit, and then click OK.
In Registry Editor, locate and then click the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
Right-click Lsa, point to New, and then click DWORD Value.
Type DisableLoopbackCheck, and then press ENTER.
Right-click DisableLoopbackCheck, and then click Modify.
In the Value data box, type 1, and then click OK.
Quit Registry Editor, and then restart your computer.
For more information: http://support.microsoft.com/kb/896861
In addition, you need to enable automatically login on Internet Explorer if you use NTLM authentication.
For the full conditions must be met for Internet Explorer to automatically authenticate a user's logon and password and maintain security, see
http://social.technet.microsoft.com/Forums/nl/sharepoint2010setup/thread/0de7b015-3a76-47b5-8dd0-bb0cdc20f733
There are two similar threads for your reference.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/305c4817-72ab-412e-b145-e89385720404/sharepoint-ask-for-username-and-password-for-central-admin-access-and-site-access
http://social.technet.microsoft.com/Forums/en-US/0cab9699-e1be-405c-8fe2-0f8b2f7b0159/access-denied-for-every-option-in-sharepoint-foundation-central-administration?forum=sharepointadminprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
I remember an article explaining how to install SharePoint Foundation 2010 in a Windows 7 box which was prone to some errors but however a great article (http://blogsp.idea80.com/2010/02/instalacion-de-sharepoint-2010-sobre.html).
I wander if it would be posible to install 2013 in a Windows 8 pro box.
I want to try the SharePoint features in Visual Studio but I dont really want to go through the whole installation process for SharePoint in a server. I am not interested in ADS integration or anything else, just basic functionality to develop some basic
add ons in Silverlight.
Any help would be greately appreciated.
thanks!No, it's not possible to do that anymore, it has to be run on Windows Server 2008 R2 or 2012, and I would totally recommend the latter, it seems to perform much better. But what you can do is this, and its what I'm doing, run a virtual machine on Windows
8 running Windows Server 2012 and install SharePoint 2013 there. Works like a charm.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
Failed to create configuration database on Sharepoint Foundation 2010 install under Windows 7
Configuration Failed
Failed to create the configuration database.
An exception of type System.IO.FileNotFoundException was thrown. Additional exception information:could not load file or assembly 'Microsoft.IdentityModel, version = 3.5.0.0,culture=neutral, PublicKey Token=31bf3856ad364e35' or one of its dependencies. The
system cannot find the files specified.
I already installed microsoft sharepoint foundation 2010 but I got the error as per above.How to solve this problem?Hi,
Also check out Bill Baer's post:
Common Microsoft SharePoint Server 2010 Installation Issues and Resolutions
http://blogs.technet.com/b/wbaer/archive/2009/12/11/common-microsoft-sharepoint-server-2010-installation-issues-and-resolutions.aspx
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2
HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil KumarYou really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist -
SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"
Hi all,
I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
Very shortly after this opens, it then closes and nothing else happens.
Anybody have any suggestions?
Thanks!Thanks for the quick reply. Here is the Folder I am looking in:
"C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
Here is some of my opatchinstall log:
OPatchInstall: Logging all properties
OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do ¬ close applications. (A Reboot will be required.)'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
/extract:path, extracts the content of the package to the path folder
/log[:path to log file], enables verbose logging for the update installation
/lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
/quiet, runs the package in silent mode
/passive, runs the update without any interaction from the user
/norestart, prevents prompting of user when reboot of machine is needed
/forcerestart, forced restart of machine once update is complete
/?, shows this help message'
OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
OPatchInstall: Property 'PATCH.LANG' value '1033'
OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
OPatchInstall: Property 'SYS.LANG.RTL' value '0'
OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.VER' value '601'
OPatchInstall: End of all properties
OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionExtractFile
OPatchInstall: CActionExtractFile::initFromElement starts
OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
OPatchInstall: CActionExtractFile::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionExtractFile::execute starts
OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Successfully retrieved the data location and size
OPatchInstall: CActionExtractFile::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: Executing CConditionBooleanOperator::evaluate
OPatchInstall: The property 'SYS.ERROR.INERROR' exists
OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: CActionPromptEULA::execute starts
OPatchInstall: Running in full UI, will show the EULA dialog
OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: User Accepted the EULA, executing the Accept action list
OPatchInstall: Finished executing the Accept action list
OPatchInstall: CActionPromptEULA::execute ends
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptFolder
OPatchInstall: CActionPromptFolder::initFromElement starts
OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
OPatchInstall: CActionPromptFolder::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionCreateFolder
OPatchInstall: CActionFile::initFromElement starts
OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
OPatchInstall: CActionFile::initFromElements ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt -
SharePoint Products Configuration Wizard - Configuration Failed at step 10 of 10
A little background information. I am simply trying to create a SharePoint Server on my laptop. I utilized the Microsoft Hyper-V Manager
to create a Virtual Machine of which I have Windows Server 2012 R2 running. I have installed the SharePoint prerequisites via some power shell scripts that all seemed to have worked and I believe i even updated the server with all updates to date. <o:p></o:p>
<o:p> </o:p>
However, when I run the SharePoint Products Configuration i get a failure at step 10 of 10. I am a SharePoint developer and power user not an
administrator for Windows Server. Any assistance would be greatly appreciated. <o:p></o:p>
<o:p> </o:p>
<o:p> </o:p>
SharePoint Products Configuration Wizard<o:p></o:p>
Configuration Failed<o:p></o:p>
<o:p></o:p>
One or more configuration settings failed. Completed configuration settings will not be rolled back. Resolve the problem and run this configuration
wizard again. The following contatins detailed information about the failure:<o:p></o:p>
Failed to create sample data.<o:p></o:p>
<o:p> </o:p>
An exception of the type System.ServiceModel.ServerTooBusyException was thrown. Additional exception information: The HTTP service located
at<o:p></o:p>
http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc is
unavailable. This could be because the service is to busy or because no endpoint was found listening at the specified address. Please ensure that the address is correct and try accessing the service again later.<o:p></o:p>
<o:p> </o:p>
Click Finish to close this wizard.<o:p></o:p>
Larry StupkaThe First Thing Disable or Remove Antivirus / ForeFront, etc. and try if again it's failed then try clearing the cache.ini
you can find it in location
C:\ProgramData\Microsoft\SharePoint\Config\GUId
go inside the GUID and look for cache.ini
reset the value to 1
run the command stsadm -o execsvcadmjobs
try running the below command
psconfig.exe -cmd upgrade -inplace b2b -wait -force
Sajid H. A. Rashid Analyst Application Developer -
Sharepoint Foundation 2010 install fails on Windows 2012 R2 server
Microsoft kb article at https://support.microsoft.com/kb/2724471/ is saying we need to use the Sharepoint install CD that includes SP2 in order for installation to succeed. Where can we download Sharepoint Foundation 2010 SP2 slipstream install image
so that we can be compatible with install on a Win2012 R2 server? Can you provide a link. Technet download page only has the Sharepoint install and the SP2 install separately. Thank you.You can download it from here:
https://www.microsoft.com/en-us/download/details.aspx?id=24983
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
License Question for SharePoint Foundation 2010
I have a question as it regards to the user agreement for SharePoint Foundation 2010.
When I deploy code to the front-end of the Foundation service which directly modifies the code on the front-end to make the system do anything different out of the box, does this mean I have violated the code agreement.
For instance, using JQuery to manipulate the look and feel of a form, use third party tools like SPServices, attach SharePoint Designer workflows, modify the server end by using STSADM command line to turn features on and off, create and deploy site
collection features using Visual Studio, or create web parts?
Also, if I am using this software for business purposes of any kind, does it mean I need to purchase the software?
I have received a copy of Share Foundation along with a Server 2008 R2 OS which was purchased.
IF I use Foundation to run my business processes, am I in violation of the user agreement and do I need to purchase SharePoint Server 2010 with CALs?The official answer: "I'm not a licensing person. Please contact Microsoft."
In general:
Foundation is a "free" download, but can only be installed on Windows Server. You can install Foundation 2010 on Windows 7, but only for testing/development, not as a production server.
Foundation is "free" in that it is licensed as part of the Windows Server it is installed on.
If you have 500 users, then Windows Server will need to be licensed for 500 users. The Windows Server licensing will also depend on if the users are internal or on the internet.
SQL Server: If you are using SQL Express, then no license costs, but the number of SharePoint users may impact the licensing costs of your SQL Server.
The choice between Foundation vs. Standard or Enterprise is the list of features needed and scalability (how many users?).
"JQuery, SPServices, SharePoint Designer workflows, STSADM, Visual Studio..."
None of those will impact your licensing. Anything that you do to directly query or manipulate the SQL tables will impact your support. SharePoint is a platform and you are expected to configure and customize it.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner
Maybe you are looking for
-
My iPod Classic will no longer allow me to create podcast playlists. It create music playlists. I've restored it twice. What is the problem?
-
We have a CFC page that was working fine before moving to CF9 from CF8. Any ideas on why it is no longer working? It is not processing at all now - just giving us this error. <cfcomponent displayname="Checks For Email Address" output="true" hint="C
-
Return Order doesn't show Relationship tab in service for Object in ECC 6.0
Hi, When a Return Order is made from an Idoc, unable to see the relationship tab to be active in Service for Object. When tried the same in the old systm 4.6C it works fine.
-
An email could not be sent and a message appears every time i open mail how can i get rid of message
sorry this was a vague problem...i sent an email to a french website but it bounced back saying messge could not be sent due to mistake in address. now every time i go to my mail the message..This mail cannot be sent appears..i press the OK to and it
-
Hello, I have been binge watching tons of material and annotating timecodes (in and outs) in an Excel spreadsheet. Now I have received the material in high resolution and I don't want to do the work all over again creating the subclips. I have tried