Advance slide when button is pushed only
:confused
I have placed a "next" button on my slides and do not want
the user to be able to advance the slide until the audio is done
playing...how do I do that? Is there a way to turn off the
Captivate bar that appears at the bottom of the published
presentation or is there a setting somewhere???
Thanks
Hi Tg-Ed
To turn off the Captivate playback control, click Project
> Skin... > Playback Control tab and DE-select the "Show
playback control" check box.
Once you do this, you may wish to configure the timing of
your Next button so it doesn't become available to be clicked upon
by your user until the audio finishes playing.
Cheers... Rick
Similar Messages
-
"Write to text file" when button is pushed?
I want to use the function "write to text file" when a button is pushed, and write only once.
The same goes for "read from text fileHello!
Look at the following examples shipped with LabVIEW Professional and LabVIEW Full. Event structure example is not installed with Base package.
Open up 'Example Finder', click on the 'Search' tab, enter keyword 'events' and you fill find several examples. The ones of interest for you is 'New Event Handler.VI" and 'Old Event Handler.VI', where the first uses the event structure and the other uses the standard state machine architecture.
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal -
Temporary white screen when home button is pushed.
My ipod touch only shows a white screen when buttons are pushed (I can't see any apps or icons). I tried turning it off, and then I restored it. The screen will be off and then when I push the home button it shows a white screen and will eventually fade back out after... Help?!
akjennydog wrote:
If I RESTORE the iTouch will it delete photos and music?
Yes a Restore will do that...
Your Photos and Music should be on the Computer you usually Sync with...
The iPhone is Not a storage device...
iPhone User Guide -
How can I eliminate the slide when I push the home button?
How can I eliminate the slide when I push the home button?
What are you talking about?
Slide to unlock?
You cannot eliminate it.
Something else?
Please explain. -
How do I make this code generate a new pro when the "NEXT" button is pushed
How do I make this code generate a new set of problem when the "NEXT" Button is pushed
* To change this template, choose Tools | Templates
* and open the template in the editor.
/* Figure out how to create a new set of problms
* Type a list of specifications, include a list of test cases
* DONE :]
package javaapplication1;
import java.awt.GridLayout;
import java.awt.Window;
import javax.swing.*;
import java.awt.event.*;
* @author Baba Akinlolu -
class Grid extends JFrame{
int done = 0;
final int score = 0;
final int total = 0;
//Create Panels
JPanel p2 = new JPanel();
JPanel p3 = new JPanel();
final JPanel p1 = new JPanel();
//Create Radio buttons & group them
ButtonGroup group = new ButtonGroup();
final JRadioButton ADD = new JRadioButton("Addition");
final JRadioButton SUB = new JRadioButton("Subtraction");
final JRadioButton MUL = new JRadioButton("Multiplication");
final JRadioButton DIV = new JRadioButton("Division");
//Create buttons
JButton NEXT = new JButton("NEXT");
JButton END = new JButton("End");
//Create Labels
JLabel l1 = new JLabel("First num");
JLabel l2 = new JLabel("Second num");
JLabel l3 = new JLabel("Answer:");
JLabel l4 = new JLabel("Score:");
final JLabel l5 = new JLabel("");
JLabel l6 = new JLabel("/");
final JLabel l7 = new JLabel("");
//Create Textfields
final JTextField number = new JTextField(Generator1());
final JTextField number2 = new JTextField(Generator1());
final JTextField answer = new JTextField(5);
Grid(){
setLayout(new GridLayout(4, 4, 2 , 2));
p2.add(ADD);
p2.add(SUB);
group.add(ADD);
group.add(SUB);
group.add(MUL);
group.add(DIV);
p2.add(ADD);
p2.add(SUB);
p2.add(DIV);
p2.add(MUL);
//Add to panels
p1.add(l1);
p1.add(number);
p1.add(l2);
p1.add(number2);
p1.add(l3);
p1.add(answer);
p1.add(l4);
p1.add(l5);
p1.add(l6);
p1.add(l7);
p3.add(NEXT);
p3.add(END);
//Add panels
add(p2);
add(p1);
add(p3);
//Create Listners
Listeners();
void Listeners(){
NEXT.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
int answer1 = 0;
//Grab the numbers entered
int numm1 = Integer.parseInt(number.getText());
int numm2 = Integer.parseInt(number2.getText());
int nummsanswer = Integer.parseInt(answer.getText());
//Set the score and total into new variabls
int nummscore = score;
int nummtotal = total;
//Check if the add radio button is selected if so add
if (ADD.isSelected() == true){
answer1 = numm1 + numm2;
//otherwise check if the subtract button is selected if so subtract
else if (SUB.isSelected() == true){
answer1 = numm1 - numm2;
//check if the multiplication button is selected if so multiply
else if (MUL.isSelected() == true){
answer1 = numm1 * numm2;
//check if the division button is selected if so divide
else if (DIV.isSelected() == true){
answer1 = numm1 / numm2;
//If the answer user entered is the same with th true answer
if (nummsanswer == answer1){
//add to the total and score
nummtotal += 1;
nummscore += 1;
//Convert the input back to String
String newscore = String.valueOf(nummscore);
String newtotal = String.valueOf(nummtotal);
//Set the text
l5.setText(newscore);
l7.setText(newtotal);
//Otherwise just increase the total counter
else {
nummtotal += 1;
String newtotal = String.valueOf(nummtotal);
l7.setText(newtotal);
//Create End listener
END.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
// get the root window and call dispose on it
Window win = SwingUtilities.getWindowAncestor(p1);
win.dispose();
//new Grid();
String Generator1(){
int randomnum;
randomnum = (1 + (int)(Math.random() * 100));
String randomnumm = String.valueOf(randomnum);
return randomnumm;
public class Main {
* @param args the command line arguments
public static void main(String[] args) {
// TODO code application logic here
JFrame frame = new Grid();
frame.setTitle("Flashcard Testing");
frame.setSize(500, 200);
frame.setLocationRelativeTo(null);
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setVisible(true);
}Edited by: SirSaula on Dec 7, 2009 10:17 AMNot only are you continuing to post in the wrong forum but now you are multiposting: [http://forums.sun.com/thread.jspa?threadID=5418935]
If people haven't answered you other posting its probably because we don't understand the question. Quit cluttering the forum by asking the same question over and over and then next time you have a new question post it in the proper forum. Your first posting was moved becuase you didn't post it properly. -
The "Next" button is grayed out on quiz slides when running in HTML 5 Chrome browser and iPad
Hi,
Has anyone run into this problem for Captivate 8? The "Next" button is grayed out on quiz slides when running in HTML 5 Chrome browser and iPad. The Next button shows in IE/Flash mode.
Thanks in advance for providing your help!
Zhuoran.Thank you Rod.... I changed the option to "Required - User must take the quiz to continue." Now the next is working .
Thank you for pointing the right direction. But one quick question.. will the above setting affect my assessment? I have set the pass percentage to 100%...
My next question - I have a open course menu (TOC). If the learner clicks the Knowledge check page, the knowledge check page is visible, but if you click any other page from knowledge check, it is not going...... by default, it takes to the next page. From that page, you can click any other page... IS this also related to the above option .. pls let me know.. -
Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
TerrenceHey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M. -
my wifi on my ipod touch wont even turn. when i go to slide the button to turn on it wont let me slide it....it says there is no wifi.
See here:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
However, frequently it is due to a hardware problem an an appointment at the Genius Bar of an Aplpe store is required. -
My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?
Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen -
My iPad frequently locks up, even after updating to iOS 7.1. When it locks up it's nonresponsive to the home button and the only remedy is to force a shut down and reboot. Help!
DEVICE NOT RECOGNISED IN ITUNES
If you have connected your device to your computer and it does not appear in the side bar in iTunes then for Windows computers read http://support.apple.com/kb/TS1538 or if you have a MAC then read http://support.apple.com/kb/ts1591 for troubleshooting steps. -
As Wendy Li informed that PPT ask you to update from slide library automatically. But this happens only if the slides are saved in your system(in read write mode). Is it possible to run the updates automatically on Read-only slides as well.
Thanks.
Old:
Currently I'm executing the task manualy by using the Check for updates option. But I'm willing to develop a macro code which can be executed when the slide is open and automatically replaces the slides with the latest one from the Slide-Library. Any links
to pre-existing code will be helpful. Thanks.Hi SamGoe,
According to your description, my understanding is that you want to update the PoerPoint slide from SharePoint 2010 slide library automatically.
It seems to be not necessary to use Macros. SharePoint provides an OOB way to notify you to check for update to the slide library slides when you open the presentation. PowerPoint does this because you selected the option
Tell me when this slide changes when you copied the slides from the library.
More information, please refer to the link below:
http://office.microsoft.com/en-us/powerpoint-help/sharepoint-slide-libraries-ii-use-slides-in-the-library-RZ010254089.aspx?section=6
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
how do i reload 10 4 x when my system will only shut down by holding down the power button. G4 Imac 17"
Power down, hold the Mouse button AND the Option/alt button down at bootup, that should open the CD/DCD tray & you can insert your Install Disc, as well as giving you boot options.
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.) -
I have a Macbook Pro that has Windows loaded. I use that most often and it opens immediately upon opening the computer. I can't remember how to get back to the Mac side of the computer and want to begin to use it as well. Can anyone help me remember the buttons to push ?
Thank youHold down the Option key when starting up, or restarting. You'll be presented with the Startup Manager, which is a simple graphic of the drives you can boot to. Double click the drive which has OS X on it. Once in OS X, go to the System Preferences and click on Startup Disk. Choose the drive you always want the Mac to boot to first.
-
I am trying to factory restore my macbook air, I tried following a youtube video performing the option + power button and am only getting the macintosh HD option not the recovery HD option. Is there another way to reset the computer?
The proper shortcut is COMMAND-R, not COMMAND-PowerButton. See the following:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
Error -- No Such Trigger('when-button-pressed')
Hi,
I am getting the error ""No Such Trigger('when-button-pressed')"",
when I am executing the code EXECUTE_TRIGGER( 'WHEN-BUTTON-PRESSED' );
on some item(Key-Next-Item), although WHEN-BUTTON-PRESSED trigger exists.
What could be the problem ?. It worked till yesterday, giving error from today, I havent
changed any thing.
Thanks in Advance
DevenderSteve's tip is the only good solution for this case.
The problem in your case for example is:
Let's say you have a block-trigger, which fires after your execute-trigger.
Now a colleague of you, which don't know your code, create a WHEN-BUTTON-PRESSED on an item, then the new code is started and not the block-trigger-code.
So, don't ever do this. Write your code in a package-function or -procedure and call it from the trigger. So you can re-user the functionality
Gerd
Maybe you are looking for
-
How to get the number of columns in a result set???
hi everyone.. i am trying to establish a servlet applet communication.... my applet send the sql query to the servlet as serialised string and then the servlet executes the query... Since i need to pass the result back to the applet, i thaught of pas
-
Updated mac to snow leopard now safari won't open
I just updated my iMac to snow leopard, as I was having problems updating iTunes. Now safari says it can't open with this version of mac snow leopard. Any suggestions?
-
When is Lion going to be released?
-
Where can I find a manual for iMessenger?
I want to learn more about iMessenger. Where can I find directions or a manual?
-
Why is iPhoto rotating my photos when I import them from my iPhone?
I have the latest iPhoto software and am using an iPhone 6. This was happening with my iPhone 5 as well. When I import my photos they are all rotated once counter clockwise. The only photos that get imported without being rotated are photos that hav