Advance Slide while Recording

I just installed Captivate 4 and I noticed that you can no
longer select Record without Preview. This allowed me to advance my
slides on screen while in the recording window. My question: is
there a way to get this to work the same in Captivate 4! Can I
still advance my slides for the narrator while I control the audio
record window and advance them from within there as before in
version 3. Why did they remove features!
Also, I like the Menu feature in the skin window and it has
been replaced by TOC, which is nice, but I would like to have the
option of both. My old version 3 files used Menu and now they are
gone when converting to version 4.
Not happy!

Welcome to our community, Theresa
You need to be reporting these issues to Adobe so that they
are aware of how the changes impacted you.
What's that you say? You thought you just did by posting?
Nope, sorry. Adobe has a preferred method of receiving this type of
feedback. It's called the Wish Form.
Click
here to visit the Wish Form/Bug Reporting Form
Cheers... Rick

Similar Messages

Is there any way to PAUSE/RESUME the actual recording while recording a Video Demo slide in Captivate 8?

If I have to take an "off-screen" action while recording a video demo slide in Captivate I am forced to END and start a separate video demo to continue.
This fragments my demo and seems an unnecessary set of steps.
Is there a way to pause the recording for long enough, say to clear my throat, and then resume?
Thanks.

Hi kjjr54,
Please refer to the link below:
Create Mobile Learning & Elearning Content. Screen Capture, Screen Recorder | Adobe Captivate 8
Hope this helps!
Regards,
Sheena

How to view presenter notes while recording slide show?

Hi,
I am a new keynote user.
I was wondering if there is a way to view notes/presenter tools while recording the slideshow. Currently when I start recording the slideshow it jumps to the full-screen slideshow view and I am unable to see the notes.
Thanks.

I think you will need to connect a second display.

Some fields are missing while recording through shdb

Dear Abapers,
I am doing bdc for F-27 t.code.Some fields,cobl-gsber(business area),cobl-kostl(Cost center) are missing while recording through SHDB.But when do it manualy the fields are displaying.Also i have ddded those fields manualy in the program,stll the fields are not getting captured.May anyone pls help me,why this problem is happening?What is the solution for this.
Thanks in Advance.

hi
i can tell u that few transactions wont suffice us with BDC,so for such transactions we do bdc with similar kind of transactions.
ie., The transactions FB60 and f-63 both are meant for Parking.
But we cant do bdc for FB60 Parking. So we do bdc for f-63.
similarly when we do bdc for vendor few fields wont appear...in that case, we use bapi for it....
So try to find an appropriate bapi or similar tcode which will suffice ur need
hope its clear.
Regards
Sajid

Can we take photos still while recording videos on iphone 4s on ios 6??

Can we take photos while recording videos on iphone 4s using ios 6??

1. Open the camera app.
2. Move the slider from in the bottom right from photo to video.
3. Begin recording your video.
4. While your video is recording, tap the camera icon in the upper right to take a photo.
5. You'll see the shutter close on your screen each time you snap a photo.
6. Your photos will be saved to your camera roll.
Edit:
Just noticed you have a 4S...iPhone 5 only, sorry.

While recording in captivate 4 I get a pop at the beginning of each recording

While recording narration over a PP conversion in captivate 4 I get a pop at the beginning of each recording, It doesn't seem to matter if I use keyboard shortcut or the mouse. Any thoughts?
Paul

Welcome to our community
Is the unwanted bit part of the countdown?
If so, there are a couple of ways to avoid it.
1. Don't record your narration at the same time you record the actions. Record it separately. No narration means no countdown.
2. After the countdown stops, consider that first slide to be a throwaway and ensure you don't begin recording in earnest until after you hear the first camera shutter sound.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Fan noise being picked up while recording in garageband

For some months I have been using garageband to record my narration of stories. When I played them back they were perfect.
However, today I recorded 2 stories and when I played them back there was a constant huming [the fan] noise in the background.
Would anyone be able to help me please?
My MacBook Pro is 10 months old.

I am not running anything in the background while recording.
If your fans are running at high speed, although the computer is not experiencing heavy usage and is properly ventilated, you may need to reset the System Management Controller (SMC), see:
Intel-based Macs: Resetting the System Management Controller (SMC)
To adjust the recording level for the internal microphon, just speak into the microphone and watcht the indicator lights below the slider. If these lights occasionally go to the right margin, the level is too high and may result in clipping, then move it back to the left.
Regards
Léonie

Pause button problem while recording audio

Someone talked about that problem on another post but I think
that problem deserve a post for it...
We have a probleme when using the pause button while
recording audio on a slide.
If we hit the pause button, it completely deletes all
previous recording in the slide.
If someone have a long text to read for a slide he cannot
take a break and think if everything is ok. Our clients are
disappointed and calls this function.
Do you have an idea when that problem will be solved ?
Thank

Hi Edji, I could not agree more. We reported this to Adobe
months ago and it has been acknowledged, but no information will be
made availlable about any fix release date. We have over 500 staff
users making recordings using Presenter and have trained the
majority on version 6. Imagine the number of supports calls we have
had to deal with when suddenly the pause button deletes all
previous slide recordings in version 7.
Depsite many attampts to get a resolution for this we have
had nothing aside from the suggestion above which certainly does
not fix the issue. It is a significant bug in the program that has
caused us endless hours of support work.
We are quite dissappointed at present with the lack of
reponse to the need for a fix and are currently evaluating a number
of other products.
Pityful but true.

How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic

I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.

You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion

Volume levels while recording...

Hi folks!
I know this may be quite basic, but I am curious about volume settings on the channel strip, master, stereo out, et cetera while recording. Are there specific settings one must consider before recording one of the Logic instruments into a track? The reason I ask is because I record an instrument into a track that seems to be relatively present with regards to the volume. However, when other instruments are recorded and the texture starts to thicken a bit, an instrument that once sounded relatively loud is now MUCH less audible, even with the slider almost all the way to the top on my controller. Is this just a natural thing that is manipulated with automation and plug-ins later on after the arrangement is done?
Also, I was wondering if volume automation prevents the use of a slider to increase or decrease the overall volume of the track. I would like to apply volume automation, but at the same time, be able to control the overall level of volume using my controller. That way, the automation would move in tandem with the set level from the slider. Right now, the slider on my controller has no effect on the track volume that has automation. I know this is basic, but I'm new...

Hi there,
Here are some really useful threads at other discussion boards on this very topic. The main thing to remember is that tracking levels for digital recording do not need to be as hot as they do for analog recording, where signal-to-noise ratio is a greater consideration.
http://messageboard.tapeop.com/viewtopic.php?t=31541&highlight=trackinglowerlevels
http://recforums.prosoundweb.com/index.php/mv/msg/15038/0/16/0/
These discussions get pretty technical at times, but the gist seems to be that for digital, you tend to get more in trouble at the "summing" stage (when things get mixed together) than with the recording stage where the noise floor is less of an issue. This could be why you're noticing what you're noticing?

Sound while recording with audigy 2 zs plati

i have the audigy 2 zs platinum. i'm using the /4" line in 2/mic in 2 to plug my guitar into. i can hear the guitar fine until i hit the record button on my software. it records what i'm playing, and will play it back with sound, but, again, no sound while recording. i also noticed there's no "li've" sound during playback. i've checked connections, and installed the latest drivers for the card. i'm using adobe audition 2.0 to record. please help!

Sure. Selecting "Line 2" records the signal just after it has entered the main CL chip, and selecting "What you hear" records the signal after it has been through the mixer/effects DSP in that chip. It's likely that CL lowers the volume a notch to reduce the chance of clipping from mixing/effects processing. Note that the signals at that point are 32-bit, so that some additional headroom really doesn't lose you anything; all you need to do is to raise the recording volume a bit to compensate.
The card's unity settings are designed for 50% on the recording slider and 00% elsewhere (i.e. there is a 2x digital multiplier on the recording slider). You may get some useful insights from a page I have: <a href=http://pages.sbcglobal.net/hamakerd/sbsrc/ target=_blank>http://pages.sbcglobal.net/hamakerd/sbsrc/[/url] by following the Additional Information link at the bottom, and seeing my comments (under the General heading) about how I determined the recording volume settings I used in that testing.
-Dave
[email protected] Edited by dwh on 04-07-2005 04:57 PM

Insert marker while recording

I saw a video by Dr. Pooja Jaisingh in which she said there is a keyboard shorcut that will insert a marker while recording in Captivate 7.The marker is to mark slides which you need to redo. Can someone tell me the keyboard shortcut to insert this marker, please?
DJ
PS - I really want to insert a click box with a keyboard shortcut while recording. Apparently, this can not be done. So I thought I'd use this redo marker to mark where I want the click boxes.

There is a shortcut key possible for each interactive object, also for click boxes, look in the Action accordion of its properties. So if you want a big shape button with shortcut Enter (or something else) on each slide to Play...
To time for rest of slide: use CTRL-E on timeline. When you copy/paste the click box it will retain that timing.
On Master slides you can only add shape buttons:
http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6
I also did a webinar for Adobe about using shape buttons, but search is down on Adobe's blog site. It is labeled 'Lilybiri's favourite...'
About click boxes: they don't have an object style because by definition they are invisible to the user. hence...
However I don't understand why one of these methods doesn't work for you:
Create a click box on the first slide, time it for rest of slide and use the transform accordion or mouse to resize it to the slide size, then copy it, select all the other slides in the Filmstrip and paste.
Use the existing click boxes that were added automatically on the slides during a Training simulation, resize one of them and make its timing for rest of slide. Then use the small curved arrow in top of the Timing accordion to apply this to all click boxes, same for the Transform accordion to apply the resizing for all click boxes.
Both work for me. Are you sure you were on a regular and not on a master slide?
Lilybiri

Why can't I take a picture while recording video on iPhone 4S with iOS 6.0

I have an iPhone 4S running iOS 6.0 and I've read the user guide, but cannot seem to get it to take a picture while recording video.

1. Open the camera app.
2. Move the slider from in the bottom right from photo to video.
3. Begin recording your video.
4. While your video is recording, tap the camera icon in the upper right to take a photo.
5. You'll see the shutter close on your screen each time you snap a photo.
6. Your photos will be saved to your camera roll.
Edit:
Just noticed you have a 4S...iPhone 5 only, sorry.

Record filtered in advance as error records with the same key exist

Dear Masters
I am getting below error for master data (0MATERIAL_ATTR), while loading data from PSA to Info object through DTP (I have set the Handle duliocate record also). When I checked that error data in Error Stack, I am getting below error for all records(100)
"Record filtered in advance as error records with the same key exist"
Could u please help me to resolve this issue
Thanks in Advance
Raja

Hi
Thanks for reply
I have loaded the Delta data in PSA. In PSA data was loaded successfully. I got the failure only when I loaded the from PSA to Maste data
Thanks in advance
Raja

Photo Booth froze while recording video and did not save

Hi-
I was in the middle of recording a video on Photo Booth for a school project. Before you go any further- I now know that I should have used iMovie or Quick Time to record, but I was having the same problem with freezing/lagging video. So I decided on using Photo Booth because it is what I am most familiar with.
It was about a 20 minute video and I noticed that the picture would freeze every so often, even right after I began recording, so I know it is not a size issue. I also do not have anything in my Photo Booth tray or library, so I know I have enough space.
Here's my issue: I pressed stop when I was done recording. But I got the infamous "spinning wheel of death." It didn't go away, even after 10 minutes so I force quit. I have located the recording in Finder. It says the name of the video, and the size, but the thumbnail is just the default QuickTime icon, not an icon.
How do I recover this? It's extremely important that I do. Hoping EZ Jim will respond! Thank you so much in advance.
I am using a MacBook Pro 13" from 2011.

l_kleiman wrote: ... I should have used iMovie or Quick Time to record...
Yes, you should have. Do so in future recordings that are important or longer than a couple of minutes.
l_kleiman wrote:... the picture would freeze every so often,...
Because your problem is the same with all three video recording applications, we can rule out application software as the cause of your trouble. Here are some possible causes and what you can do to try to solve them:
(1) Video recording is processor intensive. If you are also running many more apps than only the video app while you are recording, your Mac's processor may be working near its limit.
Restarting your Mac before recording video ensures you will not have interference from multiple user accounts or widgets (unless they are included as  > System Preferences... > Account > Login iTems.
Remember that things like widgets and automatic checks for Mail, TimeMachine backups, iCal alarms, etc., and other background activities also add to your Mac's workload. The actions for the apps mentioned (and for most other such apps) can be disabled in "Preferences" for the apps that control them.
Disconnect all peripherals while you are recording video, and make your record monitoring window as small as possible. These suggestions help reduce processor power requirements while recording.
(2) Installing the maximum amount of RAM your MBP can use may help you. Your retailer can help you check what you have and install more if necessary.
(3) Alternatively, the cause of your symptoms May lie in your system software.
Consider the information in OS X Mountain Lion: If your Mac runs slowly. It applies equally to your OS X Lion system.
If you are not already running the latest Lion version, apply the OS X Lion Update 10.7.5 (Client Combo) update.)
l_kleiman wrote:... the picture would freeze ... even right after I began recording, so I know it is not a size issue. I also do not have anything in my Photo Booth tray or library, so I know I have enough space...
Neither freeze timing nor Photo Booth tray or library space tells you whether your startup disk has enough free ("Available") space for best operation.
Use your Mac's Finder > File > Get Info menu command to check available free space. Be sure you have LOTS of room (I keep 75% of my disk space free when recording video) on your MBP's disk.
Capture your movie clips on your MBP's startup disk rather than on an external drive which is almost certainly slower.
l_kleiman wrote:... when I was done recording... I force quit... but the thumbnail is ...not an icon. How do I recover this?...
If something here doesn't work, http://bit.ly/1An6zjD, your only remedy it to record the video again.
l_kleiman wrote:... Thank you so much in advance...
You're welcome. If you need to post back for other suggestions, please tell us the following:
0. What Lion version number you are using? You can find the version with the  > About This Mac menu command.
1. Are you recording your video subjects in bright lighting?
2. Did your Mac ever record video properly? If so, what happened immediately before the problem first appeared? (new software, hardware, etc?)
3. How much free space is "Available" on your startup disk?
4. How much RAM is installed in your Mac?
5. If you added RAM, what brand (Apple, Crucial, Other World, etc.) did you install?
6. Have you used Apple Hardware Test to verify your RAM is all working? (If you don't know how to use AHT, see your MBP's User Guide.)
We will offer more specific suggestions based on the details in your response.
Message was edited by: EZ Jim
Mac OSX 10.10.2

Advance Slide while Recording

Similar Messages

Maybe you are looking for