Advise on name of the Z structure of RFBIBL00

Hi
in the standard program RFBIBL00 you can use u2022 ZBSEG as a customer defined input structure.
since for each project there exist a proper naming convention please advise whether i can create use other name than the ZBSEG

Hi,
No..you cannot change the name of the Structure...it has to be ZBSEG.
The customer-defined structures beginning with "Z" may only vary from the standard structures beginning with "B" in that part of the fields are not contained in them. However, you may not leave out the fields record type (-STYPE) or table name (-TBNAM).
Customer-defined batch input structures:
If you do not need certain fields of the standard batch input structures and do not want to enter the special character NODATA each time, you can define your own structures which contain only those fields you really use.
The following structures are possible:
ZBSEG record type 2 document segment data
ZSELP record type 2 selection items (FB05 only)
Follow the Link
http://help.sap.com/saphelp_45b/helpdata/en/35/a47e63763e0392e10000009b38f9b7/content.htm

Similar Messages

File-2-Proxy: Get file name in the inbound proxy?

Hi,
I need to know the file name in the inbound proxy. After a search I found that's possible mapping the file name to the target structure as it's explained in that link: [http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1731350750DB00274596951164745615End?blog=/pub/wlg/2664]
But I need to know if there is another way to access the file name in the inbound proxy without modifying the mapping.
Thanks.

this is possible by a dynamic configuration (there is no other easy way)
some references -
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1159980350DB00296046510040545862End?blog=/pub/wlg/13704
the idea is to get the file name in runtime using the dynamic conf code and poulating it to any field that will be part of the proxy message

Name of the structure needed for sales order user exit

Hi,
I am planning to write a user exit which will insert the data into my ztable the moment the new sales order is created and is saved.
I have identified FORM USEREXIT_SAVE_DOCUMENT as the necessary user exit. But the problem is that while inserting the data into the ztable I cannot insert the data from vbak as the data will be inserted into this table after the SO is saved.
Thus I need to identify a structure which is used to populate the vbak table so that it simultaneously inserts the data in the ztable as well. Can anyone help me with the name of the structure so that these fields i.e. vbeln, vkorg, vtweg, spart are inserted into my ztable?
Also need to know how to convert the net value i.e. vbak-netwr in Indian Rupees as it gets stored as Dollars ....
Thanks,
Vinod.

Hi,
One of the structure being used is RV45A, there are several other str's being used as well for various calculations,
check out program SAPMV45A for the same.
& in order to convert vbak-netwr to rupees use the below statemetnt,
WRITE vbak-netwr TO zvbak-netwr CURRENCY INR.
Regards,
Raghavendra
Message was edited by:
raghavendra ay

I have copied many photo's from another laptop to my Mac. The older photo's are in directories with names that help me select what I need to view. I would like to have all my imported new photo's also bee added to the directory structure I have in Finder

I have copied many photo's from another laptop to my Mac. The older photo's are in directories with names that help me select what I need to view. I would like to have all my imported new photo's also bee added to the directory structure I have in Finder but my new photo's are all in iPhoto. I want to use directories for storing and iPhoto for viewing. Is this possible or do I need to have all my photo's in iPhoto??
Mitch

iPhoto is not a Photo Viewer. It's a Photo Manager and designed for looking after the files while you organise the Photos. It really works much better if you let it manage those files. If you use iPhoto you never go near those files because iPhoto is your start point for anything you want to do with your Photos - the point of the pplication.
You can run iPhoto in Referenced mode, where it does not copy the files to the Library, but I caution you that you are making life a lot more difficult for yourself by doing that.
How to, and some comments on why you shouldn't, are in this thread
https://discussions.apple.com/thread/3062728?tstart=0
Regards
TD

Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign. Please advise how to correct the name that it is saved under.

Every time I download a file to my macbook pro, it saves it to downloads but changes the name and inserts % sign. Please advise how to correct the name that it is saved under.

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs
http://support.apple.com/kb/HE37

How do I find the name of an append structure?

Lets say I want to add a field to the component BT115QS_SLSQ (Sales quote search).
I enhanced the component and the view (SlsQuotSQ).
If I go to the context nodes and the context node BTQSLSQUOT.
I can see the implementation class ZL_BT115QS_SLSQUOTESQ_CN00.
If I go inside of this class I see a tab attributes with a field called base_entity_name
the initial value is BTQSlsQuot for this attribute.
But how would I ever know that the append strcture name for this component / view is CRMST_QUERY_SLSQUOT_BTIL ???
I only displayed it above becuase I did endless searches and realized this is the one. But is there an easier way to find the append strcture name so that when I go to SE11 I can either copy and paste it in or type it in. Is there somewhere in the workbench or anywhere which tells me its in this case CRMST_QUERY_SLSQUOT_BTIL ???
How do I find this name ?

Edit:
FOUND THE ANSWER!
Here is a complete document I put together for anyone else with this issue.
I would really love to blog SAP issues like this because there seems to be very little help on the forums for the CRM Web client side :(...
Purpose
The purpose of this document is to explain how to find the append structure and how to use it.
Problem
Letu2019s say I want to add a field to the component BT115QS_SLSQ (Sales quote search).
I enhanced the component and the view (SlsQuotSQ).
If I go to the context nodes and the context node BTQSLSQUOT (this is in the context nodes area)
I can see the implementation class ZL_BT115QS_SLSQUOTESQ_CN00.
If I go inside of this class I see a tab attributes with a field called base_entity_name
the initial value is BTQSlsQuot for this attribute.
That is the key here, in order to determine the append structure to use when going into SE11 you need to know the name of the base_entity_name. In the above case the base entity name is BTQSlsQuot.
That means you need to use BTQSlsQuot
Step By Step Procedure
1)     Get the base entity name as described above
2)     Once the base entity name is given go to transaction GENIL_MODEL_BROWSER
3)     Enter a component or a component set like so:
a.
4)     Press the green check box
5)     For model select u201CDynamic Search Objectsu201D (for this particular case because we are trying to add a field to a dynamic search)
6)     Select u201CDynamic Query Object BTQSlsQuotu201D
7)     Once you expand this you should be given the attribute structure as shown below:
Now you have the attribute structure name CRMST_QUERY_SLSQUOT_BTIL
How To Use Append Structure
Now that youu2019ve found the append structure to use it follow these steps:
1)     Go to SE11
2)     Click radio button Data type
3)     Enter CRMST_QUERY_SLSQUOT_BTIL
4)     Click display like so:
a.
5)     Click the u201Cappend structureu2026u201D button at the top right
6)     Add the field as a ZZ field and enter the data type like so:
a.
References
No search available for field //BTOPPORTH/EXPREVENUE (STRUCT.EXP_REVENUE) ?
Field Available in Results List But Not Available In Search Criteria?
Edited by: Hermiz Jon on Jan 6, 2011 5:51 PM

Name of the F4 help structures for field SPRAS

Hi experts,
As 'hrpad00fatxt' is the f4 help structure for 'Famst'..... could you give the names of the f4 help structures for the field 'Spras' ??
plz help

H_T002 is the name of search help//
if u know the table in which it(the field) is used...u can ur self find it...just like I checked in T001 table..
There i cliked on the field type spras. there at the bottom right ...u can find the search help...in the search help tab..
Edited by: Rudra Prasanna Mohapatra on Jul 21, 2008 10:29 AM

Need Table name for the structure

hello guru's,
I am using the tcode AW01N , In that i need to fetch a field that field contanis structure named
AW01_DEP_PAR. My field name is RSTNDJ,RSTNDP . can u tell me from which table its stored .
AW01_DEP_PAR-RSTNDJ, AW01_DEP_PAR-RSTNDP.
Regards
vinoth.v

Vinoth,
We can find it using ST05.
Activate the trace in ST05
Run the transaction in which you want to find the table for the corresponding structure.
After completing the entire transaction Process go to ST05 decactivate the trace and display the trace.
Now in the menu bar go to Trace List>>Summarise trace by tables or press Ctrl+F8.This you will get to know all the tables that are getting updated when a particular transaction is Executed.If you explore it then you will be able to find out the corresponding table for a structure.Hope this may give you some lead.
K.Kiran.

Table name for the structure MEPO1211

Hi Friends,
I want to find out the the Purchase Orders created with USD currency. This currency indicator is not available in the table EKPO. On checking the PO, the currency field is in the strucure MEPO1211.
Kindly let me know the table name where the PO with currency is stored or the table name for the structure MEPO1211.
Thanks in advance.
Regards,
Mark K

Hello Mark
If the fields belong to the PO header then EKKO is the table you should look for.
In case of item related data the table is EKPO.
In any case structure MEPO1211 just belongs to screen 1211 in the PO application.
Further Reading:
[Purchase order item - cl_po_header_handle_mm|https://wiki.sdn.sap.com/wiki/display/ABAP/Purchaseorderitem-cl_po_header_handle_mm]
Regards
Uwe

Table name and field name of the structure field

Hi Gurus
I am having a screen where i enter a value in a field and that field is a structure field, I would like to know in which table and what field is this value storing?
Can anyone help me out in finding the field name? and what is the procedure to find?
Thanks in advance

Hi Satya,
In the field data section (technical information), you can double click on the field name then the system will take you to SE11 (Data Dictionary). From here, you can check whether the field is available in tranparent table or structure.
In general, as naren mentioned sales order header data stored in table VBAK and line item in table VBAP, VBEP, etc.
For request delivery date, it stores in table VBAK-VDATU.
Regards,
Ferry Lianto
Please close this thread if your problem solved and mark for all helpful answer.

Creating a structure, knowing the name and the type of the components

hi, following problem:
i have uploaded an excel file from a different system with the information about the names and the types of the components of several structures.
how can i create a structure with this informatin on my system?

ok, i think i have to give you some more details:
i want to update a table from a table saved on another system using a report.
(only inserts are important, no updates)
the problem is, that tables may not have the same components.
therefore i have created several excel sheets with following content (using mehtod gui_download):
name1      ; name2        ; name3....                 | name of the component
typ1         ; typ2           ; typ3 ...                     | type of the component
content11 ; content12   ; content13
content21 ; content22   ; content23
uploading the file into table <uploadtable>
now need dynamic structure: let' s say dynamicwa
name1   typ1
name2   type2
then: loop at <uploadtable> into dynamicwa.
            move-corresponding dynamicwa to destinationwa.
            insert destination_wa into destination_table.
        endloop.
but how can i create this dynamicwa?
Message was edited by: Michael
        Michael Dirndorfer

What is the name of the structure that is generated ina a recording

hi
what is the name of the structure that is generated ina a recording using transaction recorder.

Hi,
to store data use BDCDATA structure which holds the field name and field values.
BDCMSGCOLL is the structure which will holds the message numbers after calling the TCode in your BDC program.
it holds which records error records by msg type E.
You can find which records are error records while uploading data.
in call transaction method it will use for error records .
Reward points if usefull.

Bex Query: Too many table names in the query The maximum allowable is 256

Hi Experts,
I need your help, Im working on a Query using a multiprovider of 2 datastores, I need to work with cells to assign specific acconts values to specific rows and columns, so I was creating a Structure with elements from a Hierarchy, but I get this error when I'm half way of the structure:
"Too many table names in the query. The maximum allowable is 256.Incorrect syntax near ')'.Incorrect syntax near 'O1'."
Any idea what is happening? is ti possible to fix it? do I need to ask for a modification of my Infoproviders? Some one told me is possible to combine 2 querys, is it true?
Thanks a lot for your time and pacience.

Hi,
The maximum allowable limit is 256 holds true. It is the max no. of characteristics and key figures that can be used in the column side. While creating a structure, you create key figures (restricted or calculated) and formulas etc.. The objects that you use to create these should not be more than 256.
http://help.sap.com/saphelp_nw70/helpdata/EN/4d/e2bebb41da1d42917100471b364efa/frameset.htm
Not sure if combination of 2 query's is possible. You can use RRI. Or have a woorkbook with 2 queries.
Hope it helps.

Report for Approver's name in Org. Structure

Dear Experts.
Is there any standard way out to get a report where we can find the approver's name with the employee name. I want a report where i can find all the employee name with his approvers name, which is assigned in org.structure( reports line to). is here any standard way to find the same or we hv to go for some developments.
Thnx.
S kumar

Hi,
You may wanna check S_AHR_61016513.
Select "Standard selection screen".
There object type O and find the object id of your root org unit.
For evaluation path select O-S-P.
Regards,
Dilek

How-can-i-remove-my-skype-name-from-the-sign-in-sc...

Guys this is absolute rubbish feature of the login application where people's login names get recorded in the dropdown menu. Is there any more permanent way of getting rid of this annoying privacy intrusive "feature"? I would like to have a profile with a username that is not going to appear at airports and my grandma's laptop after I log out of skype and no I do not want to go digging for app files to remove my entire history on each and every machine I use as suggested by your help files. Could you please advise if I'm missing something here?
https://support.skype.com/en-gb/faq/FA11070/how-can-i-remove-my-skype-name-from-the-sign-in-screen-i...

Unfortunately, the option to remove that feature is not available.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Advise on name of the Z structure of RFBIBL00

Similar Messages

Maybe you are looking for