File-2-Proxy: Get file name in the inbound proxy?

Hi,
I need to know the file name in the inbound proxy. After a search I found that's possible mapping the file name to the target structure as it's explained in that link: [http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417200)ID1731350750DB00274596951164745615End?blog=/pub/wlg/2664]
But I need to know if there is another way to access the file name in the inbound proxy without modifying the mapping.
Thanks.

this is possible by a dynamic configuration (there is no other easy way)
some references -
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1159980350DB00296046510040545862End?blog=/pub/wlg/13704
the idea is to get the file name in runtime using the dynamic conf code and poulating it to any field that will be part of the proxy message

Similar Messages

Get File name of the inbound file during mapping

Scenario: to read the file name of the inbound file (which has date required for the mapping) during runtime.
The requirement is to read the date of the inbound file (passed to the XI pipline by the file adapter) and populate the same in the outbound mapping structure.
Any idea about how to do this?
(I went through few options of using java.util.map. not successful yet)

Hi Anand,
I posted the same question a time ago, without any help....
Can I find out the full filename of input file in message mapping?
Posted: Nov 23, 2004 1:00 PM
I have in XI 2.0 the following scenario :
In the inbound fileadapter I read my input file. The filename of the input file is part fixed, part variable (Like INDATA01.txt, INDATA03.txt, etc).
So in my Adapterconfiguration, I specify the filename with a wildcard (INDATA*.txt).
What I now want to do, is in my Message Mapping use the full filename , so I can do something different for every filenumber. Is there a way where I can get the full filename available in my message mapping (I did not find the filename in the XML in the message trace).

How write the Outbound file name in the Inbound file

Friends,
I have a scenario like this.
Outbout filename - sample.txt
In sample.txt, i have having data like 20
Inbound filename - vivek.txt
i need data the like sample, 20
(NOTE: sample is the outbound file)
How to get this scenario.
Thanks in advance.
regards,
Vivek.

Hi Vivek,
If your PI is of SP14 and more you have an option called Adapter Specific Message Attributes.(ASMA) in communicatoin channel configurtaion, Which will help you in capturing the Sender file name during runtime.
So you will have to enable that option (ASMA) in Commchannel and capture file name in UDF using Java Code with the help of sap related API and map it to the target field which u would like to get populated.
follow the thread it has the discussion about acessing the Source file name.
Re: Getting file directory using dynamic configuration:Code needed
Thanks,
Ram.

Previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once before. Recently that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

Can you get the file name of the current executing TSQL script?

Can you get the file name of the current executing TSQL script? I wrote entries to a generic log file and would like to include the script name.

Okay, So What you can do is
1. Read get the version from your database and redirect it to a text file(SQLCMD outout can be directed to text file using -o option or windows redirection operator >)
2. Now you can read this value from the text file either inside a batch file or a powershell script and decide what operations you can do.
Satheesh
My Blog |
How to ask questions in technical forum

Getting the swf file name of the module

i have a parent application and it loads a module xyz.swf.
however, i don't know the name of the module the parent application is loading.
is there a way i can get the module's swf file name in the module code without knowing it beforehand?
thanks

Hi All,
Iam able to do this by checking the Option ASMA in only sender adapter itself
Regards
Bopanna

How to get file name on the base of extension

hi
reply me
how to get the filename on the base of extension from the
current directory......
for example
i create file with the "igg" extension and save in the folder
where the exe file of director save....
i want when exe run then exe file read filename of the
define( "igg" ) extension with out path just name of the file with
igg extension
tel me how
regards
farhana khan

Here's a solution that requires no xtras:
on GetFilesWithExtension(aFolderPath, aExtension)
-- INPUT: <aFolderPath> should be a valid string
folder path
-- <aExtension> may be a string file extension,
without the
-- dot. For example: "txt" or "igg"
-- OUTPUT: Returns an error symbol or a linear list of file
names
-- in the given folder. If an extension is given, only
-- files with the given extension will be listed. If not,
-- all files and folders will be listed.
vFileList = []
if not stringP(aFolderPath) then
return #stringPathExpected
end if
vIgnoreExtension = not stringP(aExtension)
vDelimiter = the itemDelimiter
the itemDelimiter = "."
n = 0
repeat while TRUE
n = n + 1
vFileName = getNthFileNameInFolder(aFolderPath, n)
if vFileName = "" then
exit repeat
end if
if vIgnoreExtension then
vFileList.append(vFileName)
else if the last item of vFileName = aExtension then
vFileList.append(vFileName)
end if
end repeat
the itemDelimiter = vDelimiter
return vFileList
end GetFilesWithExtension
You can also use
Buddy API's baFileList,
which allows you to do wildcard searching.

Get a font's file name from the font's postscript name (on Windows)

I am trying to obtain the the font file name when the only information I have is the font's 'postscript' name. (Emphasis: the font's name is postscript and not the font).
For example I have the following postscript name: TimesNewRomanPSMT.
The real name that is saved in the registry is: Times New Roman (TrueType).
Is there any way of obtaining that name from the given postscript name?
Currently I am coding this for Windows, but it should be compatible, or at least have alternative code for MacOS

Funny. I'm having the same problem and was about to post the exact same question
In Photoshop, there is "app.fonts", which lets you get a font's postscript name from the font's name. This doesn't exist in After Effects.
My only hope is that there's a way to get a font's postscript name in Visual Basic. I'll let you know if I find anything useful.

Selection of Folder/File name using the same Fun.Module

Please let me know if there is a function module which can fetch folder name/File name from the directory path when f4 option of selection screen field is selected. Currently I am able to get the file name using FM F4_DXFILENAME_4_DYNP but the requirment is like I have to select either folder name or the file name depending on user selection.
Note: Please let me know if there is a single Function module which can get folder name or the file name based on the user selection.i.e, if the user want to select a folder he can select or he can select files in the folder for processing

Hi sridhar
try this:
PARAMETER : TXT_FILE(100).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR TXT_FILE.
PERFORM GETFILE.
start-of-selection.
PERFORM GETDATA.
FORM GETDATA.
DATA : FILENAME TYPE STRING.
FILENAME = TXT_FILE.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = FILENAME
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
 CODEPAGE = ' '
 IGNORE_CERR = ABAP_TRUE
 REPLACEMENT = '#'
 CHECK_BOM = ' '
IMPORTING
 FILELENGTH =
 HEADER =
 TABLES
 DATA_TAB = IT_UPLOAD
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM GETFILE.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 DEF_FILENAME = ' '
 DEF_PATH = '.'
 MASK = ' '
 MODE = ' '
 TITLE = ' '
 IMPORTING
 FILENAME = TXT_FILE
 RC =
EXCEPTIONS
 INV_WINSYS = 1
 NO_BATCH = 2
 SELECTION_CANCEL = 3
 SELECTION_ERROR = 4
 OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
This is a part of my BDC program its working for me u try n reply if it works for u.
regards
vijay

Dynamic File Name - Suppress the Substitue varible

Hi All,
I am doing the scenarios like File name at the recevier end would be dynamic for that i take an extra field NAME mapped with UDF which return the file name dynamically. It is working fine and doing good. But the problem here is , this field is the first field in my target structure so i am getting an empty line in the target file.
So My structure as follows:
MT_BNK01 1..1
NAME 1..1
RECORD 0..Unbound
 --Record_data 0..Unbound
So in the recever side i written as follows
Recordset Structure:: RECORD
RECORD.fieldSeparator = 'nl'
RECORD.endSeparator = 'nl'
But according to this weblog i can suppress the empty line but it is not working
/people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12
means, NAME is also in the same level of RECORD in the Structure. So How can i pass the structure as ??
I tried to pass the RecordSet Structure: NAME,RECORD
and following parameters, it is not working
NAME.fieldFixedLength =0
NAME.fieldLengthTooShortHandling = Cut
Can you please suggest me what could be the reason. Tell me what information i need to pass the RecordSet Structure and attrubute information also.
One more thing like, My sender side it is not picking the empty lines. What could be the reason. I given fieldSeparator and endSeparator as 'nl'. So to catch the empty line what i need to do???
Thanks in Advance,
Best Regards,
Vijay

Hi Vijaya,
This can be solved. Actually i had the same scenario where i was getting blank line for the header. Suppose Header was carrying the file name after i cut the value i would get a blank line in file.
So i added in content conversion parameter the following line
Header.endSeparator - '0'
then the first line was not blank.
Try this, i think your issue will be solved
Regards,
Ramesh P
Message was edited by:
 Ramesh Parashivamurthy

Add file name to the element in target message

Hi all!
I try to configure scenario:
Get all files from directory (it will not be the same number of file every time) and mapping this file to the ERP system. I use File adapter to do this. But what Is necessary I need to mapp the file name to the element in target message.
I mean: When I have got the RFC structure imprted from ERP and there I have got the element "filename". I would like to put the file name of file which I mapping to this element. Next put the all file contents with file name to the ERP table.
It is possible to do that??
I found in sap help that I can keep file name in the message header to get the same target file name, but I wont to put file contents (with file name) to the ERP table not to another file.
THX for all your opinions.

The DynamicConfiguration fin inbound message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/usr/sap/PXD/put/archive</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">ISO646-US</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20061212T121622Z</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">200610.TXT</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">124</SAP:Record>
</SAP:DynamicConfiguration>
and for Response:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:DynamicConfiguration xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">124</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">txt</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20061212T121622Z</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileEncoding">ISO646-US</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">200610.TXT</SAP:Record>
<SAP:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/usr/sap/PXD/put/archive</SAP:Record>
</SAP:DynamicConfiguration>

UDF to capture the source file name or the source folder for mapping

Hi All,
i have 2 files - File1 from File2 from 2 different folders- single comm channel FTP (FCC). i have to pass a constant A and B respectively to a field in target structure.
my options are -
either create a new field in source str populating different constants and then map to the target str
or a udf to get the source file name or the source folder so that i can map the constant using the value mapping/FixValue mapping.
please suggest. thanks.
rajib

Hi,
please use the UDF to determine the file name. Then based on file name either pass A or B to your target field.
The code is as given below. Just tweak the code to pass either A or B as per your requirement.
public String G_GetFileName(Container container) throws StreamTransformationException{
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
Regards,
Deepak.

Should the web page address be included in the file name in the meta data dialog box?

In the page properties > meta data > below is a field with the label file name: (the the area to type in the field), after the field, it is labeled .html.
I have 2 questions here.
1. If I type in http//:www (my page url), do I include .html at the end? I didn't know if this is automatically added because it is off to the side of the field?
2. If I type in the entire URL address: http//:www (etc, etc).html, after closing the page properties dialog box, I make it a habit to double check my work. What happens is the http//:www.xxx changes to (htttpwww.xxx). It drops the //: on the URL.
So would it be better to just type in www.xxx (without the http//:www.xxx)
and do you type in the .html at the end?
I am assuming this will help with SEO page ranking or at least makes it easier for the search engines to crawl your site??
I hope this makes sense.
Advise would be very helpful.
Ben

You are absolutely correct with the URL Ben. Taking your above example, you just need to type in "Services" in the file name and the webpage will be exported as services.html and the URl will be www.xyz.com/services.html.
All the webpages (be it parent page or child page) gets physically saved at the root directory of your website on the server (where your website resides).
This name is just the name of the file using which it is physically stored and called from the server. It does not help search Engines to crawl deeper inside the website.
As I explained, "name which you wants the .html file to be stored with" here means the name of the physical file which is getting saved on the server.
Most users leave the file name same as Page name. If you have it different from page name then this will be the workflow :
Page Name : About
File Name : test
domain : www.mysite.com
Now if you are using a Menu Widget, it will list "About" in the Menu. And when end user will click on "About" then it will call the file named "test.html" from the server location (where all the files of your website are stored).
And it will open a page with address "www.mysite.com/test.html"
Hope I am able to explain the concept of File Name here. Please let us know if you have further queries on this.
Regards,
Sachin

Could not save as (file name) because the file could not be found

When i try saving sothing it comes up with could not save as (file name) because the file could not be found and need to save this file. i could save stuff before but not anymore if anyone could help i would be grateful
im using photoshop cs5.1
Thanks keiron

We cannot know. These kinds of things are operating system errors with stuff getting blocked due to insufficient permissions, security tools interfering, network errors or whatever. Since you mentioned none of that, it's an "Ask your mom..." thing at this point, but if you provide more details, someone might be able to figure it out.
Mylenium

"Could not save (file name) because the file is already in use or left open."

Hello,
When I tried save as a file, I get an error msg:
"Could not save (file name) because the file is already in use or left open."
The file is not open anywhere accept Photoshop.
Mac Pro, OSX 10.5.6
Photoshop CS4.
I searched the forum but could not find anything even though i'm sure someone already asked it.
would love to get a solution for that.
thank you,
shlomit

There is a problem with both Photoshop and InDesign, then we can blame wich ever it is.
1. I open a .psd file in Photoshop CS4 by double clicking it in Bridge
2. This image is placed on a page in a open InDesign document.
3. Doing some changes in Photoshop on the image.
4. Trying to save and get this error message (this topics subject)
5. Deleting the image from the page in ID doc, it is the only one in the document.
6. Can't still save file.
7. Closing ID completely and now I am able to save the file.
I tried turning of Live preflight in Indegisn but that didn't help.
So probably the fault is InDesign or the MacOS. I didn't have this problem with CS3. It is a stupid problem because this type of workflow is pretty common and one would expect it to be solved by now.
Jan Suhr
Stockholm, Sweden

File-2-Proxy: Get file name in the inbound proxy?

Similar Messages

Maybe you are looking for