AEBS can't keep an internet connection for more than 1 day...why?

I continually have to reset my Ethernet cable on my cable modem to get connected to the internet.This is very frustrating. I had Apple send me a new unit and that still hasn't fixed the problem. The only thing that works is printer sharing.
Is anyone else experiencing the same problems?

According to Adobe...
http://www.adobe.com/products/creativecloud/faq.html
Do I need ongoing Internet access to use my Creative Cloud desktop applications?
No. Your Creative Cloud desktop applications (such as Photoshop and Illustrator) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
Seems like you would be ok, but I understand what you're saying, hopefully a Staff member will confirm.

Similar Messages

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

After installing the 8.1 update the Internet Sharing won't allow any devices to stay connected for more than a few hours.

Internet sharing is turned "on" and appears to be working, but really isn't. Locking the screen, restarting, or a hard reboot helps, but it is extremely aggravating not to be able to maintain a connection for more than a few hours at a time!

Thank you so much for the info! I apologize for having asked for your device model as that is the forum you posted to. Also, I know that we've set the expectation that the device will remain connected as long as a demand for signal flows through it, but that may not be entirely the case. After a period of constant use, any device (including the Lumia 822) may require or force itself to stop.
You've mentioned that the device will freeze after a few hours usage. Is the device also connected to the charger while being used as a hotspot? If so, do you notice the device getting warmer than it normally would be?
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Can we use same program ID for more than one RFC scenarios

Hi experts,
            I am working on a RFC to FILE scenario. I have created one TCP/IP connection in SM59 with a program ID. Can we use this program ID for more than one scenario. I have written code as below
data: iquote type standard table of ZIQMD initial size 0,
      IPRODUCT type standard table of ZPMS initial size 0,
      wa_quote type ZIQMD,
      wa_PRODUCT type ZPMS.
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER'
TABLES
    I_QUOTE       = iquote          .
CALL FUNCTION 'Z_CBT_RFC_QUOTEMASTER' in background task DESTINATION
'ID4'
TABLES
    I_QUOTE       = iquote          .
COMMIT WORK.
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER'
TABLES
    IPRODUCT       = IPRODUCT          .
CALL FUNCTION 'Z_CBT_RFC_PRODUCTMASTER' in background task DESTINATION
'ID4'
TABLES
    IPRODUCT       = IPRODUCT          .
    COMMIT WORK.
when i am executing the code like this. i am able to send the data to 'Z_CBT_RFC_QUOTEMASTER' , but iam not getting data for 'Z_CBT_RFC_PRODUCTMASTER' interface. ID4 is the connection that i have created in SM59. with program ID as ABCD.
              Can i use the same connection for all interfaces.Please help in this, if we can use same connection for all interfaces. then how to make changes in XI.
Thanks in advance.
Thanks & Regards,
Poorna.

Just tried this and I can confirm that my earlier understanding was correct!
One of my colleagues confused me out and the conclusion is,
1. You need a separate TCP IP Connection for every interface with a Unique program ID.
Regards
Bhavesh

My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Also, some shadowy shapes appear in the background on the upper left of the screen.

Processor 3.06 GHz Intel Core i3
Memory 12 GB 1333 MHz DDR3
Software Mac OS X Lion 10.7.5 (11G63)
iMac 21" display
My 21" display on iMac (mid 2010) is overheating so much I can't sit at my computer for more than an hour or so. Very hot. Also, some shadowy shapes appear in the background on the upper left of the screen. Any thoughts?

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

HP LaserJet 1300 not connected for more than 1 day

Since Apple came out with the Yosemite printing system, I cannot print wirelessly for more than one day. I have reset my modem, changed the location of my network, unplugged and repowered Airport Extreme, started in Safe Mode, and more.
No matter what I do: I either get: a printer name with a number in parenthese or a long Bonjour number when deleting and adding a printer on my laptop.
Whatever I do, it only works from about 24 to 36 hours. Then when i go to print it says Printer is Not Connected. I can delete and add again, usually it will find the printer, add it, print, and then a day or two later, the printer is not connected again.
But I have to keep redoing this both to my laptop and my wife's, and we have not had reliable printing since Yosemite cane out about October 18, 2014.
Equipment
iMac:
Operating Sysem: 10.10.1
Printer: HP LaserJet 1300
Network: Comcast
Router: Airport Extreme
The only thing I have not done I can think of is reset Airport Extreme. I can do that, but don't know if I will then have additional problems.
This all started with the YIosemite update but at this point I don't know if it is an HP-related problem or a general Yosemite-related problem.
I appreciate any help I can get. Have wasted probably 40 hours over two-plus months trying to get this fixed. When Apple could not fix it back in October, the person referred me to HP. The person at HP Business did not know my printer was supported for Yosemite although his own web site said it was. So that was not much help And after resetting printers, deleting and adding printers, etc., I don't know what else to do.
Thanks for listening.

Did it start not syncing after the iOS 4.2 update?

Can history of skype be saved for more than a year...

Hello , Can history of skype conversations be saved more than a year ??

I can view over 5 years of history on my computer. Your history is stored in the main.db file on your computer. If you computer was reloaded or refreshed and you did not backup up the file then the history would start again from the point of the reload. If you can't see history beyond a year, then either that happened or the file got corrupted around that time and a new one was created.

Can't Wirelessly Share Internet Connection Any More

I used to share my internet connection, without my router, through the Sharing panel of System Preferences. After messing around with some of the settings, laptops are no longer able to connect. These are the currently configured settings:
Share Connection From: Built-In Ethernet
To Computers Using: Ethernet, Airport
Should something else be enabled?
Message was edited by: KnowYourMac

http://theappleblog.com/2008/05/22/create-a-wifi-hotspot-share-your-internet-con nection-in-leopard/
Have a peek at the above link, and maybe go through step-by-step.

Router won't stay connected for more than 45 minutes

I have a BEFW11S4 v. 4 (firmware 1.52.02) wireless router that I've been using for years. Recently (i.e., within the past week), it has been dropping its internet connection about every 45 minutes. The network set-up is: an XP desktop connecting via an access point (Linksys WUSB11 v. 2) and a Vista laptop connecting via its internal wireless card. I also have a Vonage-supplied Linksys router running VoIP (RT31P2) that's connected to the wireless router. The cable modem is a Scientific Atlanta DPC2100 series.
The routers/modem are on a bookshelf in the middle of a wall all by themselves. There is a DECT 6.0 cordless phone across the room (as far away as possible from the router).
When the router is connected, everything works with no problems whatsoever. Then, after about 45 minutes, the connection drops from everything. After unplugging the wireless router for about 30 seconds then plugging it back in, it's good to go for another 45 minutes. I've tried changing the wireless channel with no luck. I've also cycled the entire system (*several* times. ugh!) The SSID is not "linksys." My internet provider did recently change to Comcast, but the problems I've been having don't align with the change in providers.
Some quirks that I've noticed is that the Vista laptop can see the network, but can't connect, saying it received no response from the router when I run the "Diagnose the problem" function. The XP machine responds in a similar manner; it has my network on the list, but just hangs when it tries to connect. Also, sometimes the VoIP router is affected (i.e., the phone line disconnects), but other times it's not.
I'm extremely frustrated at this point, and ready to chuck everything out the window. Does anyone have any idea what could be causing this type of problem?

Well if you are able to go online directly with the modem...connect modem>>>>route>>>>pc....if its a cable modem then reset the router for 30 secs in such a way that power light is blinking on the router.Now, power cycle the complete power cycle...ie., unplug the power cable from the modem & from the router...now plug in the power cable to the modem once all the lights are solid green you could plug in the power cable to the router....& you would be online

Connecting to the update has been connecting for more than 6 hourand is still trying to connect when will it finish downloading the suggested update?s, why? This update has slowed me down way too much.

A window opened when I started that said " We strongly suggest that you update......" I did not want to but each time I turned my computer on the same window pops up with the "strongly suggest" and my computer began to run slower and stop lot. So I finally pressed the bar for more information..But never got any. My computer continued to keep "stop script" and run slow. So after several days of this I clicked on "Next" to download the update and it has been" Connecting to the update server" for over 6 hours now and still running little green boxes in a frame over and over and over. Why is this happening?

Join the club Robert.
My huge annoyance is how Preview converts ai, .eps and .ps files to .pdf files.
It has progressively deteriorated from Tiger to Leopard to Snow Leopard.
In Leopard it defaulted to saving the .pdfs to the Documents folder not the place of origin and would regularly crash if more than a few (sometimes just 2) files were opened simultaneously.
In Snow Leopard nothing was fixed and now the names are stripped off the converted files so that they are all called Untitled.
Apple must have received hundreds of bug reports (I diligently sent one every time Preview crashed) and several feedbacks detailing the problem, to the point I believe persecuting Designers and ruining their work has become a NEXT programmers secret objective.
Except for a couple of minor bug fixes to do with drag & drop in Preview, I am puzzled where the so-called improvements in Snow Leopard really benefit user.
Peter

Macbook Pro Airport won't connect for more than a few seconds on battery

My Macbook Pro will not stay connected to my work Wifi lan running on cisco AP1213G. It connects for a few seconds then drops the connecion whenever it's on battery power. On mains power it connects after saying there was an error but will occasionally not pass any trafic
SSID is hidden, network uses WPA.
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 0.1.24
Current Wireless Network: lonschap01-lan
Wireless Channel: 5
Any ideas?
Rob
Macbook Pro Mac OS X (10.4.7) 2Gb Ram, 100Mb HD 2Gz Core Duo.

Certain settings, e.g. printer sharing, can prevent sleep. There are other possibilities as well. See this kbase article:
http://support.apple.com/kb/HT1776

Can I setup two-step verification for more than one Apple ID?

I have one iPad and one iPhone.
I have four Apple IDs.
I want to setup two-step verification in all four accounts.
Can I?
It seems that I can't, because to add a "trusted device" to an Apple ID requires setting up Find My iPhone on that device. Find My iPhone requires an iCloud account (which is available with every Apple ID). But once you change the iCloud account account used for Find My iPhone on a device, the device will not be able to be used in two-step verification for the previous iCloud account. Or will it get remembered?
Anyone have any knowledge about this?

You should be able to have more than account authorised on your Mac's iTunes via the Store > Authorise This Computer menu option - and you should be able to select and sync purchases from both accounts to your phones

Can I use the redemption code for more than one machine for Photoshop Elements?

I want to use the Photoshop Elements that I bought on more than one machine. Is that
possible using the Redemption Code? It says it was used with another Adobe ID.
Thanks

Hi Stover,
Typically you use the redemption code to retrieve your serial number for Elements products. The licensing for Elements allows the owner to install on two of their computers.
See these for reference:
Redemption Code Help
How many computers can I install Photoshop Elements on?
Hope that helps,
- Dave

Can't get firefox to work for more than a week. won't pull up any website - IE works great

I have been having problems with Firefox for some time now. I have a HP running a AMD Athlon II X4 (Windows 7). Only major software is PC Tools PC Doctor, Skype, and other MS Office software.
Firefox will simply stop loading webpages and just sit there. Internet Explorer will work fine. I have completely uninstalled, ugraded, and just about everything I can think of. This has been ongoing. It will work great for about 2 weeks, then stops. Any help would be appreciated, i don't want to use IE.
thanks

I have been having problems with Firefox for some time now. I have a HP running a AMD Athlon II X4 (Windows 7). Only major software is PC Tools PC Doctor, Skype, and other MS Office software.
Firefox will simply stop loading webpages and just sit there. Internet Explorer will work fine. I have completely uninstalled, ugraded, and just about everything I can think of. This has been ongoing. It will work great for about 2 weeks, then stops. Any help would be appreciated, i don't want to use IE.
thanks

Can an iPad be set up for more than one user accounts?

I have an Ipad wifi. i would like to let my son use it, but would like to set up a separate user account for him. Is this possible on an Ipad?

No, an iPad is a single-user device, it can only have one set of apps and content on it

AEBS can't keep an internet connection for more than 1 day...why?

Similar Messages

Maybe you are looking for